Chemicals and microbes in bioaerosols from reaction tanks of six wastewater treatment plants: survival factors, generation sources, and mechanisms

Comparative analysis of bioaerosol emissions: Seasonal dynamics and exposure risks in hospital vs. municipal wastewater treatment systems

Hospital wastewater is known to contain various pathogenic microorganisms and harmful substances. During the hospital wastewater treatment process, the bioaerosols released may encapsulate these pathogens, leading to human infection. This study undertook an investigation to compare the dispersion characteristics and seasonal variations of bioaerosols from hospital and municipal sewage. The results indicated that the airborne bacterial concentration from hospital sewage (119 ± 118 CFU/m3) was higher than municipal sewage (46 ± 19 CFU/m3), with the highest concentration observed in summer. The dominant bacterial genera present in bioaerosols from both sewages were alike, with the proportions varied by sewage types and the structure mainly influenced by seasonal factors. Bacteroides, Escherichia-Shigella and Streptococcus were identified as the most prevalent pathogenic genera in spring, summer and winter bioaerosols, respectively, while Pseudomonas and Acinetobacter were abundant in autumn. Although the non-carcinogenic risk associated with bioaerosols was low (<1), the presence of pathogenic species and their potential synergistic interactions elevated the overall exposure risk. The diffusion modeling results demonstrated that bioaerosol emissions from the surface of hospital sewage can reach up to 10570 CFU/m3 in summer and can spread more than 300 m downwind. The potential pathogenicity of bioaerosols was also highest in summer, which may pose a health hazard to populations located downwind. Therefore, the management and control of bioaerosols from sewage should be strengthened, especially in summer.

Monitoring of enteropathogenic Gram-negative bacteria in wastewater treatment plants: a multimethod approach

The wastewater treatment processes are associated with the emission of microbial aerosols, including enteropathogenic bacteria. Their presence in this work environment poses a real threat to the health of employees, both through the possibility of direct inhalation of the contaminated air and indirectly through the pollution of all types of surfaces with such bioaerosol particles. This study aimed to investigate the prevalence of enteropathogenic bacteria in the air, on surfaces, and in wastewater samples collected in four wastewater treatment plants (WWTPs). The effectiveness of conventional culture-biochemical, as well as spectrometric and molecular methods for the rapid detection of enteropathogenic bacteria at workstations related to particular stages of wastewater processing, was also evaluated. Bioaerosol, surface swab, and influent and effluent samples were collected from wastewater plants employing mechanical-biological treatment technologies. The air samples were collected using MAS-100 NT impactor placed at a height of 1.5 m above the floor or ground, simulating aspiration from the human breathing zone. Surface samples were collected with sterile swabs from different surfaces (valves, handles, handrails, and coveyor belts) at workplaces. The raw influent and treated effluent wastewater samples were aseptically collected using sterile bottles. The identification of bacterial entheropathogens was simultaneously conducted using a culture-based method supplemented with biochemical (API) tests, mass-spectrometry (MALDI TOF MS), and molecular (multiplex real-time PCR) methods. This study confirmed the common presence of bacterial pathogens (including enteropathogenic and enterotoxigenic Escherichia coli, Salmonella spp., Campylobacter spp., and Yersinia enterocolitica) in all air, surface, and wastewater samples at studied workplaces. Higher concentrations of enteropathogenic bacteria were observed in the air and on surfaces at workplaces where treatment processes were not hermetized. The results of this study underline that identification of enteropathogenic bacteria in WWTPs is of great importance for the correct risk assessment at workplaces. From the analytical point of view, the control of enteropathogenic bacterial air and surface pollution using rapid multiplex-PCR method should be routinely performed as a part of hygienic quality assessment in WWTPs.

The bioaerosols generated from the sludge treatment process: Bacterial and fungal variation characteristics, source tracking, and risk assessment

Bioaerosols generated from sludge treatment processes in wastewater treatment plants (WWTPs) may spread infectious diseases. This study investigated the generation characteristics, source, and associated risks of bioaerosols produced during sludge treatment processes. The results showed that the concentration range of total suspended particles was 49 ± 3 to 354 ± 10 μg/m3, and the primary water-soluble ions in bioaerosols were NH4+, SO42- and Cl-. The bacterial concentration in bioaerosols was 50 ± 5 to 1296 ± 261 CFU/m3, with the highest concentration in the biochemical reaction tank. The dominant bacteria in bioaerosols included Bacteroides, Cetobacterium, Romboutsia, Lactobacillus and Turicibacter, while the dominant fungi were Aspergillus, Alternaria, Cladosporium and Fusarium. Pathogenic microorganisms such as Escherichia and Aspergillus were detected in all treatment processes. The results of principal component analysis showed that the bacterial composition in bioaerosols was similar of different technological processes, while the fungal species composition was different. The dominant microbial composition of sludge and bioaerosols was relatively close. The Source Tracker results indicated that sludge was the main source of airborne bacteria in the sludge dewatering house, as well as the main source of airborne fungi in the plate-frame pressure filtration tank and the sloping plate sedimentation tank. The non-carcinogenic risk in each stage was low (1.22 × 10-9-3.99 × 10-2). However, Bugbase phenotype prediction results showed that the bioaerosols in the anaerobic sedimentation tank may have potential pathogenicity. Therefore, the management and control of bioaerosols from the sludge treatment should be strengthened.

Characteristics of aerosols from swine farms: A review of the past two-decade progress

With the rapid development of large-scale and intensive swine production, the emission of aerosols from swine farms has become a growing concern, attracting extensive attention. While aerosols are found in various environments, those from swine farms are distinguished from human habitats, such as residential, suburban, and urban areas. In order to gain a comprehensive understanding of aerosols from swine farms, this paper reviewed relevant studies conducted between 2000 and 2022. The main components, concentrations, and size distribution of the aerosols were systematically reviewed. The differences between aerosols from swine farms and human living and working environments were compared. Finally, the sources, influencing factors, and reduction technologies for aerosols from swine farms were thoroughly elucidated. The results demonstrated that the concentrations of aerosols inside swine farms varied considerably, and most exceeded safety thresholds. However, further exploration is needed to fully understand the difference in airborne microorganism community structure and particles with small sizes (<1 μm) between swine farms and human living and working environments. More airborne bacterial and viruses were adhered to large particles in swine houses, while the proportion of airborne fungi in the respirable fraction was similar to that of human living and working environments. In addition, swine farms have a higher abundance and diversity of potential pathogens, airborne resistant microorganisms and resistant genes compared to the human living and working environments. The aerosols of swine farms mainly originated from sources such as manure, feed, swine hair and skin, secondary production, and waste treatment. According to the source analysis and factors influencing aerosols in swine farms, various technologies could be employed to mitigate aerosol emissions, and some end-of-pipe technologies need to be further improved before they are widely applied. Swine farms are advised not to increase aerosol concentration in human living and working environments, in order to decrease the impact of aerosols from swine farms on human health and restrain the spread of airborne potential pathogens. This review provides critical insights into aerosols of swine farms, offering guidance for taking appropriate measures to enhance air quality inside and surrounding swine farms.

Bubbles Expand the Dissemination of Antibiotic Resistance in the Aquatic Environment

Antibiotic resistance is a global health challenge, and the COVID-19 pandemic has amplified the urgency to understand its airborne transmission. The bursting of bubbles is a fundamental phenomenon in natural and industrial processes, with the potential to encapsulate or adsorb antibiotic-resistant bacteria (ARB). However, there is no evidence to date for bubble-mediated antibiotic resistance dissemination. Here, we show that bubbles can eject abundant bacteria to the air, form stable biofilms over the air-water interface, and provide opportunities for cell-cell contact that facilitates horizontal gene transfer at and over the air-liquid interface. The extracellular matrix (ECM) on bacteria can increase bubble attachment on biofilms, increase bubble lifetime, and, thus, produce abundant small droplets. We show through single-bubble probe atomic force microscopy and molecular dynamics simulations that hydrophobic interactions with polysaccharides control how the bubble interacts with the ECM. These results highlight the importance of bubbles and its physicochemical interaction with ECM in facilitating antibiotic resistance dissemination and fulfill the framework on antibiotic resistance dissemination.

ADMS simulation and influencing factors of bioaerosol diffusion from BRT under different aeration modes in six wastewater treatment plants

Bioaerosols produced by municipal wastewater treatment plants (MWTP) can spread in air, thereby polluting the atmosphere and causing safety hazards to workers and surrounding residents. In this study, the biological reaction tanks (BRTs) of six MWTPs undergoing typical processes in North China, Yangtze River Delta, and the Greater Bay Area were selected to set up sampling points and investigate the production characteristics of bioaerosols. The Atmospheric Dispersion Modelling System method was used to simulate the diffusion of bioaerosols in the MWTPs. The concentrations of bacteria and, specifically, intestinal bacteria in the bioaerosols ranged from 389 CFU/m³ to 1,536 CFU/m³ and 30 CFU/m³ to 152 CFU/m³, respectively, and the proportion of the intestinal bacteria was 8.85%. The concentration of soluble chemicals (SCs) in the bioaerosols was 18.36 μg/m³-82.19 μg/m³, and the main SCs found were Mg²⁺, Ca²⁺, and SO₄^2-. The proportion of intestinal bacteria (75.79%) produced via surface aeration by a BRT attached to large-sized bioaerosol particles was higher than that of a BRT undergoing the bottom aeration process (37.28%). The main microorganisms found in the bioaerosols included Moraxellaceae, Escherichia-Shigella, Psychrobacter, and Cyanobacteria. The generation of bioaerosols exhibited regional characteristics. The wastewater treatment scale, wastewater quality, and aeration mode were the main factors influencing bioaerosol production. Model simulation showed that, after 1 h, the diffusion distance of bioaerosol was 292 m-515 m, and the affected area was 42,895 m²-91,708 m². The diffusion distance and range of the bioaerosols were significantly correlated with the concentration at the bioaerosol source and the aeration mode adopted by the BRTs. Wind speed and direction were two environmental factors that affected the diffusion of bioaerosols. With an increase in the diffusion distance, the concentration of microorganisms, intestinal bacteria, ions, and fine particles in the bioaerosols decreased significantly, resulting in a corresponding reduction in the exposure risk. This study provides new insights to help predict bioaerosol risks at MWTPs and identify safe areas around MWTPs. The study also provides a basis for selecting safe MWTP sites and reducing bioaerosol pollution risks.

The generation characteristics, pattern, and exposure risk of bioaerosol emitted in an A²O process wastewater treatment plant

Bioaerosols can be generated in wastewater treatment plants (WWTPs), they may contain pathogenic bacteria, cause disease transmission, and attract the public's attention. In this study, bioaerosols were collected from seven different stages of an A²O process WWTP. The component characteristics were analyzed by bacterial culture and high-throughput sequencing. The correlations in different processes were analyzed, and the health risks of bioaerosols produced were evaluated. The results showed that the concentration range of bacteria aerosol in the WWTP was 75 CFU/m³-706 CFU/m³. The concentration range of total suspended particles was 111.13 µg/m³-211.67 µg/m³, the primary water-soluble ions were Ca²⁺ and Cl⁻. In the air of each stage, the main bacteria were Cetobacterium, Bacteroides, Romboutsia, and the fungi were Fusarium, Alternaria, and Aspergillus. The dominant bacteria in the wastewater were Cetobacterium, Romboutsia, Stenotrophobacter, and the fungi were Fusarium, Aspergillus, and Mortierella. The total bacterial concentration and ion concentration in the aerobic section of the biochemical tank were the highest. The results of species composition and principal component analysis showed that the bacterial composition in the air at different processes was similar, while the bacteria in wastewater differed significantly. Among them, the wastewater bacteria in the aerobic section of the biochemical tank were closer to that in the air. Fungal results were similar to bacteria but not prominent. The bioaerosol exposure risk results show that the risk in each stage was acceptable (5.15 ×10⁻⁴-6.47 ×10⁻³). However, the exposure risk of bioaerosol was calculated by the total bacterial concentration. In fact, some pathogenic microorganisms such as Escherichia coli and Aspergillus flavus were detected in bioaerosols, which may cause hemorrhagic colitis, cancer and other diseases by swallowing and inhalation. Therefore, the risk might be underestimated and should be a cause of concern.

The source and fate of Mycobacterium tuberculosis complex in wastewater and possible routes of transmission

BACKGROUND

The Mycobacterium tuberculosis complex (MTBC) consists of causative agents of both human and animal tuberculosis and is responsible for over 10 million annual infections globally. Infections occur mainly through airborne transmission, however, there are possible indirect transmissions through a faecal-oral route which is poorly reported. This faecal-oral transmission could be through the occurrence of the microbe in environments such as wastewater. This manuscript, therefore, reviews the source and fate of MTBC in the wastewater environment, including the current methods in use and the possible risks of infections.

RESULTS

The reviewed literature indicates that about 20% of patients with pulmonary TB may have extra-pulmonary manifestations such as GITB, resulting in shedding in feaces and urine. This could potentially be the reason for the detection of MTBC in wastewater. MTBC concentrations of up to 5.5 × 105 (±3.9 × 105) copies/L of untreated wastewater have been reported. Studies have indicated that wastewater may provide these bacteria with the required nutrients for their growth and could potentially result in environmental transmission. However, 98.6 (± 2.7) %, removal during wastewater treatment, through physical-chemical decantation (primary treatment) and biofiltration (secondary treatment) has been reported. Despite these reports, several studies observed the presence of MTBC in treated wastewater via both culture-dependent and molecular techniques.

CONCLUSION

The detection of viable MTBC cells in either treated or untreated wastewater, highlights the potential risks of infection for wastewater workers and communities close to these wastewater treatment plants. The generation of aerosols during wastewater treatment could be the main route of transmission. Additionally, direct exposure to the wastewater containing MTBC could potentially contribute to indirect transmissions which may lead to pulmonary or extra-pulmonary infections. This calls for the implementation of risk reduction measures aimed at protecting the exposed populations.

Bioaerosolization and pathogen transmission in wastewater treatment plants: Microbial composition, emission rate, factors affecting and control measures

Environmental consequences during wastewater management are vital and getting increased attention to interrupt any possible disease transmission pathways. Evidence of bioaerosolization of pathogen from wastewater to atmosphere during wastewater treatment have been highlighted previously. Understanding aerosol-based transmission in wastewater treatment plant (WWTP) is important because of the hazard it presents to the workers involved or to the population around and appears to be very significant during pandemic occurrences. This work aims to evaluate the possibility of pathogenic content of wastewater getting aerosolized during treatment by synthesizing the evidence on the potential aerosol generating treatment phases of WWTP, bioaerosol microbial composition, emission load and the factors affecting the bioaerosol formation. We also present some potential control strategies to take up in WWTP which may be useful to avoid such occurrences. Implementation of Aeration based strategies (use of diffused, submerged aeration, reduction in aeration rate), Improved ventilation based strategies (effective ventilation with adequate supply of clean air, minimizing air recirculation, supplementation with infection control measures such as filtration, irradiation), Improved protection based strategy (periodic monitoring of disinfection efficiency, pathogenic load of wastewater, improved operation policy) and other strategies (provision of buffer zone, wind shielding, water spraying on aerosol, screened surface of treatment units) could be very much relevant and significant in case of disease outbreak through aerosol formation in wastewater environment. Recent progress in sensor-based data collection, analysis, cloud-based storage, and early warning techniques in WWTP may help to reduce the risk of infectious transmission, especially during a pandemic situation.

Trace volatile compounds in the air of domestic waste landfill site: Identification, olfactory effect and cancer risk

Landfill sites are regarded as sources of volatile compounds (VOCs) and odors emitted to the atmosphere. Surface emissions of VOCs and odors were investigated in a rural domestic waste landfill site located in southwest China. A total of 76 chemical compounds belonging to 3 chemical families were identified and quantified. The total number of VOCs (TVOC) detected ranged from 18.1 to 806.3 mg/m³, while odorous gases and greenhouse gases ranged from 0.4 to 21.2 and 0-100.5 mg/m³, respectively. High emissions were found in the air surrounding the leachate storage pool (LSP) and dumping area (DPA). The dominant species of VOCs were hexaldehyde, m-xylene, propylene oxide, acetophenone, and 2-butanone. The traceability analysis showed that the odors and VOCs diffused to the downwind boundary mainly came from the DPA and LSP. According to the olfactory effect analysis and cancer risk assessment, the main odor-causing gaseous pollutants were hydrogen sulfide, propionic acid, styrene, and 2-pentanone, while benzene, trichlorethylene, and 1,3-butadiene were the dominant carcinogens. This study provides new insights into the emission characteristics, olfactory effects, and cancer risks of VOCs and odors emitted from rural domestic solid waste landfill sites.

Quantitative microbial risk assessment of bioaerosols in a wastewater treatment plant by using two aeration modes

Nonnegligible emission of bioaerosols usually occurs during aeration of wastewater in aerator tanks in wastewater treatment plants (WWTPs). Literature had shown that the respiratory and intestinal diseases of workers at WWTPs are related to bioaerosols. Thus, quantitative microbial risk assessment (QMRA) based on Monte Carlo simulation was utilized in this research to assess the health risks of Gram-negative bacteria bioaerosol (GNBB) and Staphylococcus aureus bioaerosol (SAB) among academic visitors and staffs. Results showed that the concentrations of GNBB and SAB in the inverted umbrella aeration mode were consistently higher than those in the microporous aeration mode under all six size distribution ranges of the Anderson six-stage impactor. Thus, GNBB and SAB can be highly threatening to the weasand and first bronchus (or alveoli and third bronchus) for the exposure populations. The health risks (annual probability of infection (P_y) and disease burden (DB)) of males were constantly higher than those of females for each certain exposure scenario. The health risks of staffs were higher than those of academic visitors when assessed by Monte Carlo simulation. The wearing of mask is an effective measure to minimize health risks through reducing the bioaerosol concentration intake. Especially, for the academic visitors and staffs exposed to GNBB, all their DB failed to meet the World Health Organization DB benchmark under various credible intervals when they were without a mask on. In a word, the results of health risk assessment in this research can be utilized as an educational tool and policy basis to facilitate the implementation of efficacious prevention measures to protect the public health from bioaerosol health threats in WWTPs.

The effect of mixing and free-floating carrier media on bioaerosol release from wastewater: a multiscale investigation with Bacillus globigii

Aeration tanks in wastewater treatment plants (WWTPs) are significant sources of bioaerosols, which contain microbial contaminants and can travel miles from the site of origin, risking the health of operators and the general public. One potential mitigation strategy is to apply free-floating carrier media (FFCM) to suppress bioaerosol emission. This article presents a multiscale study on the effects of mixing and FFCM on bioaerosol release using Bacillus globigii spores in well-defined liquid media. Bioaerosol release, defined as percentage of spores aerosolized during a 30 minute sampling period, ranged from 6.09 × 10-7% to 0.057%, depending upon the mixing mode and intensity. Bioaerosol release increased with the intensity of aeration (rotating speed in mechanical agitation and aeration rate in diffused aeration). A surface layer of polystyrene beads reduced bioaerosol released by >92% in the bench-scale studies and >74% in the pilot-scale study. This study discovered strong correlations (R2 > 0.82) between bioaerosol release and superficial gas velocity, Froude number, and volumetric gas flow per unit liquid volume per minute. The Reynolds number was found to be poorly correlated with bioaerosol release (R2 < 0.5). This study is a significant step toward the development of predictive models for full scale systems.

Effect of aeration mode on aerosol characteristics from the same wastewater treatment plant

Aeration and mechanical agitation are the main drivers of aerosol generation in wastewater treatment plants (WWTPs). However, the effect of aeration mode on aerosol characteristics remains poorly understood. In this study, horizontal rotor aeration and fine bubble aeration in the same WWTP were selected to identify the effect on the emission, size distribution, microbial and chemical composition. For bacteria, fungi, Enterobacteriaceae, Staphylococcus aureus, and Pseudomonas aeruginosa in aerosols, the horizontal rotor aeration had higher contributions to the emissions than the fine bubble aeration. Horizontal rotor aeration generated a more coarse fraction (size > 7 μm) and a comparable respirable fraction (RF; size < 3.3 μm) compared with those of fine bubble aeration. More types of potential pathogens were generated by horizontal rotor aeration. The most easily aerosolized genera generated by horizontal rotor aeration and fine bubble aeration, were Trichosporon and Mycobacterium, with the aerosolization factors of 633.70 and 192.56, respectively. For Cl^-, SO₄^2-, NO₃^-, Zn, Ba, Cd, Sc, V, Rb, Ca, K, Ca, K, Mg, Na and Si in the aerosols, the contributions of fine bubble aeration were higher than those of horizontal rotor aeration. Due to the aerosol specialty from the different aeration modes, targeted manipulations should be employed to reduce the exposure risks.

Characteristics of submicron aerosols produced during aeration in wastewater treatment

Submicron aerosols (SAs) emitted during wastewater treatment may harm the human circulation system, respiratory cells, and deep lungs. Despite this threat, SAs remain poorly understood. In this study, a laboratory simulation aerosol generator was manufactured, and the particle number size distributions, aerosol liquid water content (ALWC), and chemical and microbial composition of SAs from aeration were analyzed. Under stable aeration conditions, the unimodal SA size distribution ranged from 68 to 350 nm. The ALWC of peak size (170 nm) was 11-21 μg/m³. Na was the dominant major element in SAs with the concentration of 5.61 μg/m³. Total organic carbon accounted for 97% of the total carbon in the SAs. Arcobacter, Methanobrevibacter, and Fusarium were the dominant SA bacteria, archaea, and fungi, respectively, and a number of viruses were also detected. Thirty-two antibiotic resistant genes, and virulence factors of which 23% were offensive virulence factors, were detected in the SAs. The results predicted that 2% of the genes in SAs were directly related to human health. Thus, SAs may pose disproportionately high risks to human health.

Characteristics and formation mechanism of intestinal bacteria particles emitted from aerated wastewater treatment tanks

Aeration tanks in municipal wastewater treatment plants (WWTPs) are regarded as sources of bioaerosols, often containing particles and microbes. In this study, intestinal bacteria were investigated from biochemical reaction tanks (BRTs) of six municipal WWTPs. It was observed that 86 CFU/m³ of intestinal bacteria (in average) occurred in the BRTs installed surface aerator, which was higher than those adopted submerged aeration (67 CFU/m³ in average). 62.72% of fine particles were observed in the BRTs supplied oxygen by submerged aerator, while 75.73% of coarse particles emitted during surface aeration. Pseudomonas sp., Serratia sp. and Acinetobacter sp. were identified as pathogenic bacteria presented in the intestinal bacteria population and most of them existed initially in water or sludge, particularly in water surface. The emission level and particle size distribution were significantly correlated with aeration mode adopted by the WWTPs. The bioaerosols particles emitted from surface aeration process was higher than that from submerged aeration process. Meanwhile, the BRTs with submerged aerators released more fine particles, which can get into the alveoli and represented the potential challenge to human health. Canonical correspondence analysis results exhibited that population of intestinal bacteria had a positive correlation with aeration rate and water quality. As the intestinal bacteria in the bioaerosols emitted from the WWTPs may pose a potential risk to onsite operators, aeration tanks in WWTPs should be paid more attention as a source of intestinal bacterial emissions.

Aerosols from a wastewater treatment plant using oxidation ditch process: Characteristics, source apportionment, and exposure risks

The study of aerosol dispersion characteristics in wastewater treatment plants (WWTPs) has attracted extensive attention. Oxidation ditch (OD) is a commonly implemented process during biological wastewater treatment. This study assessed the component characteristics, source apportionment, and exposure risks of aerosols generated from a WWTP using the OD process (AWO). The results indicated that the aeration part of oxidation ditch (ODA) exhibited the highest concentrations and proportions of the respiratory fractions (RF) of bacteria, Enterobacteriaceae, Staphylococcus aureus, and Pseudomonas aeruginosa. Some pathogenic or opportunistic-pathogenic bacteria and carcinogenic metal(loid)s were detected in the AWO. The source apportionment results indicated that the outdoor wastewater treatment processes and ambient air contributed to the constitution of the AWO. The indoor aerosols were mainly constituted by composition of the wastewater treatment process such as the sludge dewatering room (SDR). The pathogenic or opportunistic-pathogenic bacteria with eight genera (Colinsella, Dermatophilus, Enterobactor, Erycherichia-Shigella, Ledionella, Selenomonas, Xanthobacter, and Veillonella) were largely attributed to wastewater or sludge. The risk assessment suggested that inhalation was the main exposure pathway for aerosols (including bacteria and metal(loid)s). Additionally, As indicated the highest non-carcinogenic risks. Furthermore, As, Cd, and Co were associated with high carcinogenic risks. The ODA and sludge dewatering room (SDR) indicated the highest carcinogenic and non-carcinogenic risks of metal(loid)s, respectively. Thus, the AWO should be sufficiently researched and monitored to mitigate their harmful effects on human health, particularly with regard to the health of the site workers.

On the interpretation of bioaerosol exposure measurements and impacts on health

Bioaerosols are recognized as one of the main transmission routes for infectious diseases and are responsible for other various types of health effects through inhalation and potential ingestion. Associating exposure with bioaerosol and health problems is challenging, and adequate exposure monitoring is a top priority for aerosol scientists. The multiple factors affecting bioaerosol content, the variability in the focus of each bioaerosol exposure study, and the variations in experimental design and the standardization of methods make bioaerosol exposure studies very difficult. Therefore, the health impacts of bioaerosol exposure are still poorly understood. This paper presents a brief description of a state-of-the-art development in bioaerosol exposure studies supported by studies on several related subjects. The main objective of this paper is to propose new considerations for bioaerosol exposure guidelines and the development of tools and study designs to better interpret bioaerosol data. The principal observations and findings are the discrepancy of the applicable methods in bioaerosol studies that makes result comparison impossible. Furthermore, the silo mentality helps in creating a bigger gap in the knowledge accumulated about bioaerosol exposure. Innovative and original ideas are presented for aerosol scientists and health scientists to consider and discuss. Although many examples cited herein are from occupational exposure, the discussion has relevance to any human environment. This work gives concrete suggestions for how to design a full bioaerosol study that includes all of the key elements necessary to help understand the real impacts of bioaerosol exposure in the short term. The creation of the proposed bioaerosol public database could give crucial information to control the public health. Implications: How can we move toward a bioaerosol exposure guidelines? The creation of the bioaerosol public database will help accumulate information for long-term association studies and help determine specific exposure biomarkers to bioaerosols. The implementation of such work will lead to a deeper understanding and more efficient utilization of bioaerosol studies to prevent public health hazards.

Reducing bacterial aerosol emissions from membrane bioreactors: The impact of SRT and the addition of PAC and calcium

Bacterial aerosols resulting from membrane bioreactor (MBR) processes, which require excessive aeration in a confined space, are important to investigate because of their possible adverse effects on human health. This study investigated the influence of solid retention time (SRT) on bacterial aerosols from MBRs. Moreover, powdered activated carbon (PAC) and calcium were used to attenuate bacterial aerosol emissions from MBRs. The particulate matter (PM) emitted from the MBRs was reduced by 30.5 and 25.2% at SRTs of 20 and 80 d, respectively, compared to the level emitted at an SRT of 10 d. Total cell counts were similarly reduced at SRTs of 20 and 80 d. Longer SRTs also led to greater reductions in the particle size distribution of the sludge within 10 μm. Several factors in the MBR influenced the behavior of the bacterial aerosol emissions from the MBRs. This study showed that changes in viscosity and particle size induced by the SRT influenced the bacterial aerosol emissions in MBRs. Therefore, SRT was identified as an important design parameter affecting bacterial aerosol emissions in MBR processes. The amounts of particulate matter and bacterial aerosols were reduced in MBRs using PAC and calcium, both of which exerted an immediate effect on the bacterial aerosol emissions in MBRs by increasing the aerosol-particle size.