Large-scale synthesis of free-standing N-doped graphene using microwave plasma

Advancements in Surfactant Carriers for Enhanced Oil Recovery: Mechanisms, Challenges, and Opportunities

Enhanced oil recovery (EOR) techniques are crucial for maximizing the extraction of residual oil from mature reservoirs. This review explores the latest advancements in surfactant carriers for EOR, focusing on their mechanisms, challenges, and opportunities. We delve into the role of inorganic nanoparticles, carbon materials, polymers and polymeric surfactants, and supramolecular systems, highlighting their interactions with reservoir rocks and their potential to improve oil recovery rates. The discussion includes the formulation and behavior of nanofluids, the impact of surfactant adsorption on different rock types, and innovative approaches using environmentally friendly materials. Notably, the use of metal oxide nanoparticles, carbon nanotubes, graphene derivatives, and polymeric surfacants and the development of supramolecular complexes for managing surfacant delivery are examined. We address the need for further research to optimize these technologies and overcome current limitations, emphasizing the importance of sustainable and economically viable EOR methods. This review aims to provide a comprehensive understanding of the emerging trends and future directions in surfactant carriers for EOR.

Green synthesis of graphene for targeted recovery of silver from photovoltaic waste

Atmospheric pressure microwave plasma can synthesize freestanding graphene in a few seconds at ambient conditions. Recent research has explored this method for the synthesis of graphene yet constrained by the utilization of toxic or non-renewable resources. This study aimed to substitute environmentally benign and sustainable precursors, synthesizing graphene from expired tangerine peel oil, an abundant natural source globally. The Raman spectrum of synthesized material showed a characteristic graphene-related 2D peak at microwave powers varied between 200 and 1000 W. The images of transmission electron microscopy revealed interstitial spacing of 0.34, which matched the value of X-ray diffraction calculated through Bragg's law. However, marginal variations in lattice spacing owing to the presence of oxygen functional groups were also observed. Additionally, the as-synthesized graphene deposited on a screen-printed electrode was used to selectively recover silver from spent photovoltaics. Our approach of creating a graphene-silver composite directly from waste material offers environmental benefits, resource utilization, waste reduction, and versatile applications in electrochemistry.

Recovery of rare earth elements (Nd3+ and Dy3+) by using carbon-based adsorbents from spent tire rubber

Two samples of spent tire rubber (rubber A and rubber B) were submitted to thermochemical conversion by pyrolysis process. A450, B450 and A900, B900 chars were obtained from rubber A and rubber B at 450 °C and 900 °C, respectively. The chars were then applied as recovery agents of Nd3+ and Dy3+ from aqueous solutions in mono and bicomponent solutions, and their performance was benchmarked with a commercial activated carbon. The chars obtained at 900 °C were the most efficient adsorbents for both elements with uptake capacities around 30 mg g-1. The chars obtained at 450 °C presented uptake capacities similar to the commercial carbon (≈ 11 mg g-1). A900 and B900 chars presented a higher availability of Zn ions that favored the ion exchange mechanism. It was found that Nd3+ and Dy3+ were adsorbed as oxides after Zn was released from silicate structures (Zn2SiO4). A900 char was further selected to be tested with Nd/Dy binary mixtures and it was found a trend to adsorb a slightly higher amount of Dy3+ due to its smaller ionic radius. The uptake capacity in bicomponent solutions was generally higher than for single component solutions due to the higher driving force triggered by the higher concentration gradient.

Laser-irradiated carbonized polyaniline-N-doped graphene heterostructure improves the cyclability of on-chip microsupercapacitor

Laser-irradiated graphene-based heterostructures have attracted significant attention for the fabrication of highly conducting and stable metal-free energy storage devices. Heteroatom doping on the graphene backbone has proven to have better charge storage properties. Among other heteroatoms, nitrogen-doped graphene (NG) has been extensively researched due to its several advanced properties while maintaining the original characteristics of graphene for energy storage applications. However, NG is generally prepared via chemical vapor deposition or high temperature pyrolysis method, which gives low yield and has a complex operation route. In this work, first a polyaniline-reduce graphene oxide (PANI-rGO) heterostructure was prepared via in situ electrochemical polymerization, followed by the deposition process. In the next step, laser-irradiation process was employed to carbonize polyaniline as well as doping of nitrogen on the graphene film, simultaneously. For the very first time, laser-irradiated carbonization of PANI on NG (cPANI-NG) heterostructure was utilized for microsupercapacitor (MSC). The as-prepared cPANI-NG-MSC shows extremely high cycling stability with a capacitance enhancement of 135% of its initial capacitance after 70 000 continuous charge-discharge cycles. It is very interesting to know the origin of the capacitance enhancement, which results from the change of pyrrolic N in NG-MSC to the pyridinic and graphitic N. An on-chip NG-MSC exhibits an excellent charge storage capacitance of 43.5 mF cm-2 at a current density of 0.5 mA cm-2 and shows impressive power delivery at a very high scan rate of 100 V s-1. The excellent rate capability of the MSC shows capacitance retention up to 70.1% with the variation of current density. This unique approach to fabricate NG-MSC can have a broad range of applications as energy storage devices in the electronics market, as demonstrated by glowing a commercial red LED.

Microwave synthesis of antimony oxide graphene nanoparticles - a new electrode material for supercapacitors

For the first time, antimony oxide nanoparticles were produced using a microwave technique and evaluated as a supercapacitor electrode. The specific capacitance derived from the material's galvanostatic charge-discharge curve was 98 F g-1 in 1 M Li2SO4 electrolyte at 0.1 A g-1 current density. The charge storage mechanism visible in the CV curve is nearly rectangular and identical to the EDLC charge storage mechanism. Additionally, antimony species were chemically attached to graphene oxide using an antimony(iii) chloride precursor and subsequently microwave aided procedures were used to convert the antimony species to SbO-G nanocomposites. The results of energy-dispersive X-ray spectroscopy demonstrated the pure character of the produced material. In a three-electrode cell arrangement, the resulting composite was electrochemically characterized. The cyclic voltammogram results showed that among the pristine SbO, graphene, and SbO-G materials, SbO-G had a higher specific capacitance value of 37.58 F g-1, at a scan rate of 10 mV s-1. The material has also demonstrated good conductivity characteristics based on electrochemical impedance spectroscopy research. After 3500 galvanostatic charge-discharge cycles, the material had excellent cycling stability of ∼100%. All the remarkable capacitive properties demonstrated by this material indicate that it can be a viable choice in the field of energy storage devices.

Recent progress in microwave-assisted preparations of 2D materials and catalysis applications

On the urgency of metal-free catalysts, two-dimensional materials (2DMs) have caused extensive researches because of distinctive optical and electronic properties. In the last decade, microwave methods have emerged in rapid and effective preparations of 2DMs for catalysis. Microwave heating offers several advantages namely direct, fast, selective heating and uniform reaction temperature compared to conventional heating methods, thus bringing about high-yield and high-purity products in minutes or even seconds. This review summarizes recent advances in microwave-assisted preparations of 2DMs-based catalysts and their state-of-the-art catalytic performances. Microwave heating mechanisms are briefly introduced mainly focusing on microwave-matter interactions, which can guide the choice of precursors, liquid media, substrates, auxiliaries and experiment parameters during microwave radiation. We especially provide a detailed insight into various microwave-assisted procedures, classified as exfoliation, synthesis, doping, modification and construction towards different 2DMs nanomaterials. We also discuss how microwave affects the synthetic composition and microstructure of 2DMs-based catalysts, thereby deeply influencing their optical and electronic properties and the catalytic performances. Finally, advantages, challenges and prospects of microwave-assisted approaches for 2DMs nanomaterials are summarized to inspire the effective and large-scale fabrication of novel 2DMs-based catalysts.

Microwave as a Tool for Synthesis of Carbon-Based Electrodes for Energy Storage

This Spotlight on Applications highlights the significant impact of microwave-assisted methods for synthesis and modification of carbon materials with enhanced properties for electrodes in energy storage applications (supercapacitors and batteries). For the past few years, microwave irradiation has been increasingly used for the synthesis of carbon materials with different morphologies using various precursors. Microwave processing exhibits numerous advantages, such as short processing times, high yield, expanded reaction conditions, high reproducibility, and high purity of products. On this frontier research area, we have discussed microwave-assisted synthesis, defect creation, simultaneous reduction and exfoliation, and heteroatom doping in carbon materials. By careful manipulation of microwave irradiation parameters, the method becomes a powerful and efficient tool to generate different morphologies in carbon-based materials. Other important outcomes are the flexible control over the degree of reduction and exfoliation of graphene derivatives, the generation of defects in graphene-based materials by metals, the intercalation of metal oxides into graphene derivatives, and heteroatom doping of graphene materials. The Spotlight on Applications aims to provide a condensed overview of the current progress in carbon-based electrodes synthesized by microwave, pointing out outstanding challenges and offering a few suggestions to trigger more research endeavors in this important field.

Single-Step Synthesis of Nitrogen-Doped Graphene Oxide from Aniline at Ambient Conditions

Single-step, single-precursor synthesis of nitrogen-doped graphene oxide (N-GO) was demonstrated in this work. By choosing aniline as the sole source of carbon and nitrogen, N-GO films were fabricated using microwave plasma at a power as low as 80 W in atmospheric conditions. The aniline vapor dissociated under plasma formed islands of N-GO nanosheets on the substrates or walls of the quartz deposition chamber. The interplanar spacing in the pristine N-GO films was observed to be lower than that of GO films, which indicated a lower concentration of oxygen and other species present in the space between the N-GO layers. The as-fabricated N-GO demonstrated superior antiscaling and algicidal properties that are deemed imperative for water purification applications.

Site dependent catalytic water dissociation on an anisotropic buckled black phosphorus surface

Black phosphorus (BP) is unique among 2D materials due to its anisotropic puckered structure. It has been used as a multifunctional catalyst for various purposes. In this study, we performed first principles molecular dynamics simulations to understand the water-splitting reaction on a bi-layer BP surface. We focused on the site-specific aqueous reactivity of the buckled surface. A difference in the axis-dependent reactivity is observed owing to edge defects and exposed sites. Thus, we believe that BP edges, which significantly affect the interfacial water or organic solvent molecules, must exhibit very different edge-dependent reactivity. Experiments suggested the increasing catalytic efficiency of undisturbed BP in the order bulk, few-layered BP, and BP quantum dots. We choose three active sites to investigate the mechanistic details of the OER: the zigzag (ZZ), armchair (AC), and bulk sites. This study will provide insight into the enhanced catalytic activity when more edges are exposed as the active surface. We hope to clarify the reactive pathway in an aqueous solution supported by bi-layer BP by exploring the two different mechanisms for forming the OOH* complex. We explore and report two mechanisms: a simple push-pull reaction for oxygen-oxygen bond formation, the nucleophilic attack by formed OH^- and an attack by a water molecule. The free energy barriers procured for mechanism 1 taking place at the zigzag, armchair, and bulk sites are 7.59 ± 0.33, 9.04 ± 0.01, and 12.80 ± 0.09 kcal mol^-1, respectively. For mechanism 2 the free energy barriers are 7.62 ± 0.11, 9.15 ± 0.16, and 11.63 ± 0.11 kcal mol^-1 for the ZZ, AC, and bulk sites. The interlink between both the mechanisms is established concerning the reported free energy barriers for OOH* formation. The ZZ site is found to lower the activation barrier for the rate-determining step, followed by the AC and bulk.

Sustainable Hydrothermal and Solvothermal Synthesis of Advanced Carbon Materials in Multidimensional Applications: A Review

The adoption of green technology is very important to protect the environment and thus there is a need for improving the existing methods for the fabrication of carbon materials. As such, this work proposes to discuss, interrogate, and propose viable hydrothermal, solvothermal, and other advanced carbon materials synthesis methods. The synthesis approaches for advanced carbon materials to be interrogated will include the synthesis of carbon dots, carbon nanotubes, nitrogen/titania-doped carbons, graphene quantum dots, and their nanocomposites with solid/polymeric/metal oxide supports. This will be performed with a particular focus on microwave-assisted solvothermal and hydrothermal synthesis due to their favourable properties such as rapidity, low cost, and being green/environmentally friendly. These methods are regarded as important for the current and future synthesis and modification of advanced carbon materials for application in energy, gas separation, sensing, and water treatment. Simultaneously, the work will take cognisance of methods reducing the fabrication costs and environmental impact while enhancing the properties as a direct result of the synthesis methods. As a direct result, the expectation is to impart a significant contribution to the scientific body of work regarding the improvement of the said fabrication methods.

Tunable Synthesis of Predominant Semi-Ionic and Covalent Fluorine Bonding States on a Graphene Surface

In this study, fluorinated graphene (FG) was synthesized via a hydrothermal reaction. Graphene oxides (GOs) with different oxygen bonding states and oxygen contents (GO(F), GO(P), and GO(HU)) were used as starting materials. GO(F) and GO(P) are commercial-type GOs from Grapheneall. GO(HU) was prepared using a modified Hummers method. The synthesized FGs from GO(F), GO(P), and GO(HU) are denoted as FG(F), FG(P), and FG(HU), respectively. The F atoms were bound to the graphene surface with predominantly semi-ionic or covalent bonding depending on the GO oxygen state. FG(F) and FG(HU) exhibited less extensive fluorination than FG(P) despite the same or higher oxygen contents compared with that in FG(P). This difference was attributed to the difference in the C=O content of GOs because the C=O bonds in GO primarily produce covalent C-F bonds. Thus, FG(F) and FG(HU) mainly exhibited semi-ionic C-F bonds. The doped F atoms were used to tune the electronic properties and surface chemistry of graphene. The fluorination reaction also improved the extent of reduction of GO.

One-Step Plasma Synthesis of Nitrogen-Doped Carbon Nanomesh

A one-step method for plasma synthesis of nitrogen-doped carbon nanomesh is presented. The method involves a molten polymer, which is a source of carbon, and inductively coupled nitrogen plasma, which is a source of highly reactive nitrogen species. The method enables the deposition of the nanocarbon layer at a rate of almost 0.1 µm/s. The deposited nanocarbon is in the form of randomly oriented multilayer graphene nanosheets or nanoflakes with a thickness of several nm and an area of the order of 1000 nm². The concentration of chemically bonded nitrogen on the surface of the film increases with deposition time and saturates at approximately 15 at.%. Initially, the oxygen concentration is up to approximately 10 at.% but decreases with treatment time and finally saturates at approximately 2 at.%. Nitrogen is bonded in various configurations, including graphitic, pyridinic, and pyrrolic nitrogen.

Effects of Doped N, B, P, and S Atoms on Graphene toward Oxygen Evolution Reactions

Molecular oxygen and hydrogen can be obtained from the water-splitting process through the electrolysis technique. However, harnessing energy is very challenging in this way due to the involvement of the 4e- reaction pathway, which is associated with a substantial amount of reaction barrier. After the report of the first N-doped graphene acting as an oxygen reduction reaction catalyst, the scientific community set out on exploring more reliable doping materials, better material engineering techniques, and developing computational models to explain the interfacial reactions. In this study, we modeled the graphene surface with four different nonmetal doping atoms N, B, P, and S individually by replacing a carbon atom from one of the graphitic positions. We report the mechanism of the complete catalytic cycle for each of the doped surfaces by the doping atom. The energy barriers for individual steps were explored using the biased first-principles molecular dynamics simulations to overcome the high reaction barrier. We explain the active sites and provide a comparison between the activation energy obtained by the application of two computational methods. Observing the rate-determining step, that is, oxo-oxo bond formation, S-doped graphene is the most effective. In contrast, N-doped graphene seems to be the least useful for oxygen evolution catalysis compared to the undoped graphene surface. B-doped graphene and P-doped graphene have an equivalent impact on the catalytic cycle.

Hybridized Graphene for Supercapacitors: Beyond the Limitation of Pure Graphene

Graphene-based supercapacitors have been attracting growing attention due to the predicted intrinsic high surface area, high electron mobility, and many other excellent properties of pristine graphene. However, experimentally, the state-of-the-art graphene electrodes face limitations such as low surface area, low electrical conductivity, and low capacitance, which greatly limit their electrochemical performances for supercapacitor applications. To tackle these issues, hybridizing graphene with other species (e.g., atom, cluster, nanostructure, etc.) to enlarge the surface area, enhance the electrical conductivity, and improve capacitance behaviors are strongly desired. In this review, different hybridization principles (spacers hybridization, conductors hybridization, heteroatoms doping, and pseudocapacitance hybridization) are discussed to provide fundamental guidance for hybridization approaches to solve these challenges. Recent progress in hybridized graphene for supercapacitors guided by the above principles are thereafter summarized, pushing the performance of hybridized graphene electrodes beyond the limitation of pure graphene materials. In addition, the current challenges of energy storage using hybridized graphene and their future directions are discussed.

Investigation of L-Tryptophan Electrochemical Oxidation with a Graphene-Modified Electrode

A graphene sample (EGr) was prepared by electrochemical exfoliation of graphite rods in solution containing 0.05 M (NH4)2SO4 + 0.1 M H3BO3 + 0.05 M NaCl. The exfoliation was performed by applying a constant voltage (12 V) between the graphite rods, while the temperature was kept constant (18 °C) with a temperature-controlled cryostat. The structural investigation of the graphene sample, performed by X-ray powder diffraction (XRD), revealed that the sample consists of a mixture of few-layer (69%), multi-layer graphene (14%) and graphene oxide (17%). In addition, XPS analysis proved that the sample was triple-doped with heteroatoms such as nitrogen (1.7 at%), sulfur (2.5 at%), and boron (3 at%). The sample was deposited onto the surface of a clean, glassy carbon electrode (GC) and investigated for the non-enzymatic electrochemical detection of L-tryptophan (TRP). The electrocatalytic properties of the EGr/GC electrode led to a considerable decrease in the oxidation potential from +0.9 V (bare GC) to +0.72 V. In addition, the EGr/GC electrode has higher sensitivity (two times) and a lower detection limit (ten times) in comparison with the bare GC electrode.

Assigning XPS features in B,N-doped graphene: input from ab initio quantum chemical calculations

Ab initio quantum chemical calculations using large enough cluster models have been used to predict the core level binding energies of B(1s) and N(1s), including initial and final state effects, in several possible atomic arrangements in B,N-codoped graphene, such as isolated atoms, different types of B,N pairs and BN domains. To a large extent, the observed trends are dominated by initial state effects that support assigning the experimental features to the neutral samples. For the BN domains the present theoretical results are in full agreement with the experimental assignment thus providing support to the rest of the assignments. In particular, the present results strongly suggest that some of the features observed in the experiments are likely to correspond to isolated B or N atoms in graphene and, others fit well to the prediction corresponding to different types of B,N pairs. The importance of having an unambiguous, rigorous way to assign experimental features is emphasized.

A Review of Strategies for the Synthesis of N-Doped Graphene-Like Materials

Methods for synthesizing nitrogen-doped graphene-like materials have attracted significant attention among the scientific community because of the possible applications of such materials in electrochemical devices such as fuel cells, supercapacitors and batteries, as well as nanoelectronics and sensors. The aim of this paper is to review recent advances in this scientific niche. The most common synthesis technique is nitridization of as-deposited graphene or graphene-containing carbon mesh using a non-equilibrium gaseous plasma containing nitrogen or ammonia. A variety of chemical bonds have been observed, however, it is still a challenge how to ensure preferential formation of graphitic nitrogen, which is supposed to be the most favorable. The nitrogen concentration depends on the processing conditions and is typically few at.%; however, values below 1 and up to 20 at.% have been reported. Often, huge amounts of oxygen are found as well, however, its synergistic influence on N-doped graphene is not reported. The typical plasma treatment time is several minutes. The results reported by different authors are discussed, and future needs in this scientific field are summarized. Some aspects of the characterization of graphene samples with X-ray photoelectron spectroscopy and Raman spectroscopy are presented as well.

Tungsten nitride-coated graphene fibers for high-performance wearable supercapacitors

Graphene-fiber (GF) supercapacitors have attracted significant research attention in the field of wearable devices. However, there is still a need for active materials with high energy density. Transition Metal Nitrides (TMNs) are promising candidates for this purpose compared with conventional Transition Metal Oxides (TMOs) or conducting polymers (CPs) owing to their higher electrical conductivity, stability and relevant electrochemical properties. We have successfully integrated Tungsten Nitride (WN) with reduced graphene oxide fibers (rGOF) and developed high-performance hybrid fiber (WN-rGOF) supercapacitors. These hybrid supercapacitors attained a high capacitance of 16.29 F cm-3 at 0.05 A cm-3 and an energy density of 1.448 mW h cm-3, which is 7.5 and 1.75 times higher than those of the pure rGOF supercapacitor and the Tungsten Oxide/rGO hybrid fiber (WO3-rGOF) supercapacitor, respectively. The energy density readily increased up to 2.896 mW h cm-3 when three WN-rGOF supercapacitors were connected in series. The WN-rGOF supercapacitor also showed high capacitance retention of 84.7% after 10 000 cycles along with appreciable performance under severe mechanical deformation.

Simultaneous Synthesis and Nitrogen Doping of Free-Standing Graphene Applying Microwave Plasma

An experimental and theoretical investigation on microwave plasma-based synthesis of free-standing N-graphene, i.e., nitrogen-doped graphene, was further extended using ethanol and nitrogen gas as precursors. The in situ assembly of N-graphene is a single-step method, based on the introduction of N-containing precursor together with carbon precursor in the reactive microwave plasma environment at atmospheric pressure conditions. A previously developed theoretical model was updated to account for the new reactor geometry and the nitrogen precursor employed. The theoretical predictions of the model are in good agreement with all experimental data and assist in deeper understanding of the complicated physical and chemical process in microwave plasma. Optical Emission Spectroscopy was used to detect the emission of plasma-generated ‘‘building units’’ and to determine the gas temperature. The outlet gas was analyzed by Fourier-Transform Infrared Spectroscopy to detect the generated gaseous by-products. The synthesized N-graphene was characterized by Scanning Electron Microscopy, Raman, and X-ray photoelectron spectroscopies.

Prospects for microwave plasma synthesized N-graphene in secondary electron emission mitigation applications

The ability to change the secondary electron emission properties of nitrogen-doped graphene (N-graphene) has been demonstrated. To this end, a novel microwave plasma-enabled scalable route for continuous and controllable fabrication of free-standing N-graphene sheets was developed. High-quality N-graphene with prescribed structural qualities was produced at a rate of 0.5 mg/min by tailoring the high energy density plasma environment. Up to 8% of nitrogen doping levels were achieved while keeping the oxygen content at residual amounts (~ 1%). The synthesis is accomplished via a single step, at atmospheric conditions, using ethanol/methane and ammonia/methylamine as carbon and nitrogen precursors. The type and level of doping is affected by the position where the N-precursor is injected in the plasma environment and by the type of precursors used. Importantly, N atoms incorporated predominantly in pyridinic/pyrrolic functional groups alter the performance of the collective electronic oscillations, i.e. plasmons, of graphene. For the first time it has been demonstrated that the synergistic effect between the electronic structure changes and the reduction of graphene π-plasmons caused by N doping, along with the peculiar "crumpled" morphology, leads to sub-unitary (< 1) secondary electron yields. N-graphene can be considered as a prospective low secondary electron emission and plasmonic material.

Microplasmas for Advanced Materials and Devices

Microplasmas are low-temperature plasmas that feature microscale dimensions and a unique high-energy-density and a nonequilibrium reactive environment, which makes them promising for the fabrication of advanced nanomaterials and devices for diverse applications. Here, recent microplasma applications are examined, spanning from high-throughput, printing-technology-compatible synthesis of nanocrystalline particles of common materials types, to water purification and optoelectronic devices. Microplasmas combined with gaseous and/or liquid media at low temperatures and atmospheric pressure open new ways to form advanced functional materials and devices. Specific examples include gas-phase, substrate-free, plasma-liquid, and surface-supported synthesis of metallic, semiconducting, metal oxide, and carbon-based nanomaterials. Representative applications of microplasmas of particular importance to materials science and technology include light sources for multipurpose, efficient VUV/UV light sources for photochemical materials processing and spectroscopic materials analysis, surface disinfection, water purification, active electromagnetic devices based on artificial microplasma optical materials, and other devices and systems including the plasma transistor. The current limitations and future opportunities for microplasma applications in materials related fields are highlighted.

Nanostructured manganese oxides electrode with ultra-long lifetime for electrochemical capacitors

We describe the instantaneous fabrication of a highly porous three-dimensional (3D) nanostructured manganese oxides-reduced graphitic oxide (MnO_x-rGO) electrode by using a pulse-photonic processing technique. Such nanostructures facilitate the movement of ions/electrons and offer an extremely high surface area for the electrode/electrolyte interaction. The electrochemical performance was investigated by cyclic voltammetry (CV), galvanostatic charge–discharge (GCD) and electrochemical impedance spectroscopy (EIS) with 1 M KOH as the electrolyte. The as-prepared thin film electrode exhibits excellent electrochemical performance and an ultra-long lifetime by retaining 90% of the initial capacitance even after 100 000 GCD cycles at constant areal current density of 0.4 mA cm⁻². We attribute this excellent lifetime performance to the conductive reduced graphitic oxide, synergistic effects of carbon composite and the metal oxides, and the unique porous nanostructure. Such highly porous morphology also enhances the structural stability of the electrode by buffering the volume changes during the redox processes.

We describe the instantaneous fabrication of a highly porous three-dimensional (3D) nanostructured manganese oxides-reduced graphitic oxide (MnO_x-rGO) electrode by using a pulse-photonic processing technique.

Nitrogen-Doped Graphene: The Influence of Doping Level on the Charge-Transfer Resistance and Apparent Heterogeneous Electron Transfer Rate

Three nitrogen-doped graphene samples were synthesized by the hydrothermal method using urea as doping/reducing agent for graphene oxide (GO), previously dispersed in water. The mixture was poured into an autoclave and placed in the oven at 160 °C for 3, 8 and 12 h. The samples were correspondingly denoted NGr-1, NGr-2 and NGr-3. The effect of the reaction time on the morphology, structure and electrochemical properties of the resulting materials was thoroughly investigated using scanning electron microscopy (SEM) Raman spectroscopy, X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), elemental analysis, Cyclic Voltammetry (CV) and electrochemical impedance spectroscopy (EIS). For NGr-1 and NGr-2, the nitrogen concentration obtained from elemental analysis was around 6.36 wt%. In the case of NGr-3, a slightly higher concentration of 6.85 wt% was obtained. The electrochemical studies performed with NGr modified electrodes proved that the charge-transfer resistance (Rct) and the apparent heterogeneous electron transfer rate constant (Kapp) depend not only on the nitrogen doping level but also on the type of nitrogen atoms found at the surface (pyrrolic-N, pyridinic-N or graphitic-N). In our case, the NGr-1 sample which has the lowest doping level and the highest concentration of pyrrolic-N among all nitrogen-doped samples exhibits the best electrochemical parameters: a very small Rct (38.3 Ω), a large Kapp (13.9 × 10-2 cm/s) and the best electrochemical response towards 8-hydroxy-2'-deoxyguanosine detection (8-OHdG).

Perspectives on plasma-assisted synthesis of N-doped nanoparticles as nanopesticides for pest control in crops

Green plasma-based technology production of N-doped NPs for a new agri-tech revolution in pest control.

Microwave plasma-based direct synthesis of free-standing N-graphene

Scheme of ethanol/ammonia plasma driven decomposition pathways considering injection of the nitrogen precursor in “hot” and “mild” plasma zone.

Properties of Nitrogen/Silicon Doped Vertically Oriented Graphene Produced by ICP CVD Roll-to-Roll Technology

Simultaneous mass production of high quality vertically oriented graphene nanostructures and doping them by using an inductively coupled plasma chemical vapor deposition (ICP CVD) is a technological problem because little is understood about their growth mechanism over enlarged surfaces. We introduce a new method that combines the ICP CVD with roll-to-roll technology to enable the in-situ preparation of vertically oriented graphene by using propane as a precursor gas and nitrogen or silicon as dopants. This new technology enables preparation of vertically oriented graphene with distinct morphology and composition on a moving copper foil substrate at a lower cost. The technological parameters such as deposition time (1–30 min), gas partial pressure, composition of the gas mixture (propane, argon, nitrogen or silane), heating treatment (1–60 min) and temperature (350–500 °C) were varied to reveal the nanostructure growth, the evolution of its morphology and heteroatom’s intercalation by nitrogen or silicon. Unique nanostructures were examined by FE-SEM microscopy, Raman spectroscopy and energy dispersive X-Ray scattering techniques. The undoped and nitrogen- or silicon-doped nanostructures can be prepared with the full area coverage of the copper substrate on industrially manufactured surface defects. Longer deposition time (30 min, 450 °C) causes carbon amorphization and an increased fraction of sp3-hybridized carbon, leading to enlargement of vertically oriented carbonaceous nanostructures and growth of pillars.

Nitrogen-doped metal-free carbon catalysts for (electro)chemical CO2 conversion and valorisation

This review focuses on the recent developments made in the fabrication of N-doped carbon materials for enhanced CO₂ conversion and electrochemical reduction into high-value-added products.

Oriented Carbon Nanostructures by Plasma Processing: Recent Advances and Future Challenges

Carbon, one of the most abundant materials, is very attractive for many applications because it exists in a variety of forms based on dimensions, such as zero-dimensional (0D), one-dimensional (1D), two-dimensional (2D), and-three dimensional (3D). Carbon nanowall (CNW) is a vertically-oriented 2D form of a graphene-like structure with open boundaries, sharp edges, nonstacking morphology, large interlayer spacing, and a huge surface area. Plasma-enhanced chemical vapor deposition (PECVD) is widely used for the large-scale synthesis and functionalization of carbon nanowalls (CNWs) with different types of plasma activation. Plasma-enhanced techniques open up possibilities to improve the structure and morphology of CNWs by controlling the plasma discharge parameters. Plasma-assisted surface treatment on CNWs improves their stability against structural degradation and surface chemistry with enhanced electrical and chemical properties. These advantages broaden the applications of CNWs in electrochemical energy storage devices, catalysis, and electronic devices and sensing devices to extremely thin black body coatings. However, the controlled growth of CNWs for specific applications remains a challenge. In these aspects, this review discusses the growth of CNWs using different plasma activation, the influence of various plasma-discharge parameters, and plasma-assisted surface treatment techniques for tailoring the properties of CNWs. The challenges and possibilities of CNW-related research are also discussed.