Impact of Stokes Shift on the Performance of Near-Infrared Harvesting Transparent Luminescent Solar Concentrators

Mechanistic Insight into the Thermal "Blueing" of Cyanine Dyes

In recent work to develop cyanine dyes with especially large Stokes shifts, we encountered a "blueing" reaction, in which the heptamethine cyanine dye Cy7 (IUPAC: 1,3,3-trimethyl-2-((1E,3E,5E)-7-((E)-1,3,3-trimethylindolin-2-ylidene)hepta-1,3,5-trien-1-yl)-3H-indol-1-ium) undergoes shortening in two-carbon steps to form the pentamethine (Cy5) and trimethine (Cy3) analogs. Each step blue-shifts the resulting absorbance wavelength by ca. 100 nm. Though photochemical and oxidative chain-shortening reactions had been noted previously, it is simple heating alone or with amine bases that effects this unexpected net C2H2 excision. Explicit acetylene loss would be too endothermic to merit consideration. Our mechanistic studies using 2H labeling, mass spectrometric and NMR spectroscopic analyses, and quantum chemical modeling point instead to electrocyclic closure and aromatization of the heptamethine chain in Cy7 forming Fischer's base FB (1,3,3-trimethyl-2-methyleneindoline), a reactive carbon nucleophile that initiates chain shortening of the cyanine dyes by attack on their polymethine backbones. The byproduct is the cationic indolium species TMP (IUPAC: 1,3,3 trimethyl-2-phenyl indolium).

Predicting the efficiency of luminescent solar concentrators for solar energy harvesting using machine learning

Building-integrated photovoltaics (BIPV) is an emerging technology in the solar energy field. It involves using luminescent solar concentrators to convert traditional windows into energy generators by utilizing light harvesting and conversion materials. This study investigates the application of machine learning (ML) to advance the fundamental understanding of optical material design. By leveraging accessible photoluminescent measurements, ML models estimate optical properties, streamlining the process of developing novel materials, offering a cost-effective and efficient alternative to traditional methods, and facilitating the selection of competitive materials. Regression and clustering methods were used to estimate the optical conversion efficiency and power conversion efficiency. The regression models achieved a Mean Absolute Error (MAE) of 10%, which demonstrates accuracy within a 10% range of possible values. Both regression and clustering models showed high agreement, with a minimal MAE of 7%, highlighting the efficacy of ML in predicting optical properties of luminescent materials for BIPV.

A comprehensive dataset of photonic features on spectral converters for energy harvesting

Building integrated photovoltaics is a promising strategy for solar technology, in which luminescent solar concentrators (LSCs) stand out. Challenges include the development of materials for sunlight harvesting and conversion, which is an iterative optimization process with several steps: synthesis, processing, and structural and optical characterizations before considering the energy generation figures of merit that requires a prototype fabrication. Thus, simulation models provide a valuable, cost-effective, and time-efficient alternative to experimental implementations, enabling researchers to gain valuable insights for informed decisions. We conducted a literature review on LSCs over the past 47 years from the Web of ScienceTM Core Collection, including published research conducted by our research group, to gather the optical features and identify the material classes that contribute to the performance. The dataset can be further expanded systematically offering a valuable resource for decision-making tools for device design without extensive experimental measurements.

Design of J-aggregates-like oligomers built from squaraine dyes exhibiting transparency in the visible regime and high fluorescence quantum yield in the NIR region

New materials for transparent luminescent solar concentrators (TLSCs) are of large interest. Therefore, we investigated the optical properties of J-aggregates-like oligomers (hereinafter referred to as J-aggregates) based on covalently bound squaraine dyes in toluene solvent using DFT and TD-DFT methods. In addition, the rate constants needed for the prediction of fluorescence quantum yield (QY) have been calculated using Fermi's Golden rule and vertical harmonic approximation (VH) for ground and excited states. In the context of QY prediction, different broadening of the lineshape has also been employed. We found that J-aggregates based on squaraine dyes exhibit near-infrared (NIR) selective absorption and emission as well as high fluorescence QY. Comparison of the properties obtained for dimers, trimers and tetramers belonging to two classes (SQA and SQB) of J-aggregates allows us to select the tetramer of SQA J-aggregates as suitable for application. The scaling model for N ≥ 4 monomer subunits supports quantitative findings. Therefore, we propose J-aggregates containing N ≥ 4 subunits of SQA with a central squaric acid ring with two oxygen atoms in toluene solvent as a suitable candidate for TLSC application.

Improving morphology and optoelectronic properties of ultra-wide bandgap perovskite via Cs tuning for clear solar cell and UV detection applications

With growing population, vertical spaces from skyscrapers are vast. Semi-transparent solar cells enable an effective pathway for vertical energy harvesting. With composition tunability, perovskite materials can be designed with different transparencies and colors. In this work, an ultra-high bandgap layered triple cation perovskite system was developed for the first time to meet the demand of clear optoelectronic applications; low dimensional triple cation perovskite thin films were fabricated using perovskite with the formula (PEA)₂(Cs_xMA_0.61-xFA_0.39)₃₉(Pb)₄₀(Cl_0.88-0.32xBr_0.12+0.32x)₁₂₁, 0 ≤ x ≤ 0.02 with DMSO as the appropriate solvent. The absorption edge of the material is around 410-430 nm, achieving great transparency to visible light. The structural, optical, and photovoltaic performances of the clear perovskite materials are explored with the variation of Cs contents via CsBr. The relation between thickness, transparency, and optoelectronic properties of the clear perovskite materials along with other physical properties were investigated. The highest photovoltaic conversion efficiency (PCE) of clear perovskite solar cells with 1.5% Cs was achieved to be 0.69% under xenon lamp irradiation at 100 mW/cm² (1.5 mW/cm² of UVA within 100 mW/cm²) and 5.24% under 365 nm UV irradiation at 2.4 mW/cm². Photoresponsivity, external quantum efficiency (EQE), and detectivity were also determined for photodetector applications.

Practical Guidance for Developing Small-Molecule Optical Probes for In Vivo Imaging

The WMIS Education Committee (2019-2022) reached a consensus that white papers on molecular imaging could be beneficial for practitioners of molecular imaging at their early career stages and other scientists who are interested in molecular imaging. With this consensus, the committee plans to publish a series of white papers on topics related to the daily practice of molecular imaging. In this white paper, we aim to provide practical guidance that could be helpful for optical molecular imaging, particularly for small molecule probe development and validation in vitro and in vivo. The focus of this paper is preclinical animal studies with small-molecule optical probes. Near-infrared fluorescence imaging, bioluminescence imaging, chemiluminescence imaging, image-guided surgery, and Cerenkov luminescence imaging are discussed in this white paper.

Anti-Oxidation Agents to Prevent Dye Degradation in Organic-Based Host-Guest Systems Suitable for Luminescent Solar Concentrators

Luminescent solar concentrators (LSCs) have been extensively studied as they offer a practical solution to increase the efficiency of silicon-based photovoltaics (PVs). In this context, the use of natural and organic luminescent materials is desirable in order to obtain sustainable and environmentally friendly devices. Moreover, solution-processable organic host-guest systems based on Foerster Resonant Energy Transfer (FRET) processes offer the possibility to exploit a low-cost technique to obtain an efficient energy downshift from the UV-visible to red or deep red emissions in order to concentrate the radiation in the area of maximum efficiency of the PV device. Nevertheless, organic materials are subjected to photodegradation that reduces their optical properties when exposed to UV light and oxygen. In this work, we incorporated two different antioxidant molecules (i.e., octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (Octa) and L-ascorbic acid (L-Asc)) in a three-dye host-guest system and studied the corresponding optical properties after prolonged irradiation times in air. It was found that the presence of the antioxidants, especially L-Asc, slowed the system's photodegradation down whilst at the same time retaining high emission efficiencies and without interfering with the cascade Resonant Energy Transfer processes among the dyes inserted in the nanochannels of the host.

Photophysical Properties of Linear, Net-structured and Branched Polybenzimidazoles

Polybenzimidazoles with three different network structures are synthesized by condensation polymerization between the conventional monomer 3,3'-Diaminobenzidine and three different acid monomers. The synthesised polymer networks are characterized using several characterization techniques such as FT-IR, powder XRD, HR-SEM and TG-DTA analyses. The polybenzimidazoles are amorphous in nature with excellent thermal stability up to 450 ºC. The photophysical properties of polybenzimidazoles are studied using UV-visible absorption and Emission spectral techniques. Further, the excited state photoluminescence decay time measurement shows a functional group dependant decay behaviour. All the three polymers display narrow optical band gap energy and could be applied as a material for solar energy conversion and semiconductors.

Förster Resonance Energy Transfer in Luminescent Solar Concentrators

Luminescent solar concentrators (LSCs) are an emerging technology to collect and channel light from a large absorption area into a smaller one. They are a complementary technology for traditional solar photovoltaics (PV), particularly suitable for application in urban or indoor environments where their custom colors and form factors, and performance under diffuse light conditions may be advantageous. Förster resonance energy transfer (FRET) has emerged as a valuable approach to overcome some of the intrinsic limitations of conventional single lumophore LSCs, such as reabsorption or reduced quantum efficiency. This review outlines the potential of FRET to boost LSC performance, using highlights from the literature to illustrate the key criteria that must be considered when designing an FRET-LSC, including both the photophysical requirements of the FRET lumophores and their interaction with the host material. Based on these criteria, a list of design guidelines intended to aid researchers when they approach the design of a new FRET-LSC system is presented. By highlighting the unanswered questions in this field, the authors aim to demonstrate the potential of FRET-LSCs for both conventional solar-harvesting and emerging LSC-inspired technologies and hope to encourage participation from a diverse researcher base to address this exciting challenge.

Nano-enabled sensing of per-/poly-fluoroalkyl substances (PFAS) from aqueous systems - A review

Per-/poly-fluoroalkyl substances (PFAS) are an emerging class of environmental contaminants used as an additive across various commodity and fire-retardant products, for their unique thermo-chemical stability, and to alter their surface properties towards selective liquid repellence. These properties also make PFAS highly persistent and mobile across various environmental compartments, leading to bioaccumulation, and causing acute ecotoxicity at all trophic levels particularly to human populations, thus increasing the need for monitoring at their repositories or usage sites. In this review, current nano-enabled methods towards PFAS sensing and its monitoring in wastewater are critically discussed and benchmarked against conventional detection methods. The discussion correlates the materials' properties to the sensitivity, responsiveness, and reproducibility of the sensing performance for nano-enabled sensors in currently explored electrochemical, spectrophotometric, colorimetric, optical, fluorometric, and biochemical with limits of detection of 1.02 × 10^-6 μg/L, 2.8 μg/L, 1 μg/L, 0.13 μg/L, 6.0 × 10^-5 μg/L, and 4.141 × 10^-7 μg/L respectively. The cost-effectiveness of sensing platforms plays an important role in the on-site analysis success and upscalability of nano-enabled sensors. Environmental monitoring of PFAS is a step closer to PFAS remediation. Electrochemical and biosensing methods have proven to be the most reliable tools for future PFAS sensing endeavors with very promising detection limits in an aqueous matrix, short detection times, and ease of fabrication.

Highly Resolved and Robust Dynamic X-Ray Imaging Using Perovskite Glass-Ceramic Scintillator with Reduced Light Scattering

All-inorganic perovskite quantum dots (QDs) CsPbX3 (X = Cl, Br, and I) have recently emerged as a new promising class of X-ray scintillators. However, the instability of perovskite QDs and the strong optical scattering of the thick opaque QD scintillator film imped it to realize high-quality and robust X-ray image. Herein, the europium (Eu) doped CsPbBr3 QDs are in situ grown inside transparent amorphous matrix to form glass-ceramic (GC) scintillator with glass phase serving as both matrix and encapsulation for the perovskite QD scintillators. The small amount of Eu dopant optimizes the crystallization of CsPbBr3 QDs and makes their distribution more uniform in the glass matrix, which can significantly reduce the light scattering and also enhance the photoluminescence emission of CsPbBr3 QDs. As a result, a remarkably high spatial resolution of 15.0 lp mm-1 is realized thanks to the reduced light scattering, which is so far a record resolution for perovskite scintillator based X-ray imaging, and the scintillation stability is also significantly improved compared to the bare perovskite QD scintillators. Those results provide an effective platform particularly for the emerging perovskite nanocrystal scintillators to reduce light scattering and improve radiation hardness.

Impact of benzannulation on ESIPT in 2-(2'-hydroxyphenyl)-oxazoles: a unified perspective in terms of excited-state aromaticity and intramolecular charge transfer

Hydroxyphenyl-azoles are among the most popular ESIPT (Excited State Intramolecular Proton Transfer) scaffolds and as such, they have been thoroughly studied. Nevertheless, some aspects regarding the interplay between the emissive properties of these fluorophores and the size of their π-conjugated framework remain controversial. Previous studies have demonstrated that benzannulation of 2′-hydroxyphenyl-oxazole at the phenol group of the molecule can lead to either red- or blue-shifted fluorescence emission, depending on the site where it occurs. In this report, benzannulation at the heterocyclic unit (the oxazole site) is analysed in order to get the whole picture. The extension of π-conjugation does not significantly affect the ESIPT emission wavelength, but it leads instead to higher energy barriers for proton transfer in the first excited singlet state, as a consequence of dramatic changes in the charge transfer character of excitation caused by successive benzannulation. Theoretical calculations revealed an interesting connection between intramolecular charge transfer and excited-state aromaticity in the S₁ state. The theoretical approach presented herein allows the behaviour of hydroxyphenyl-oxazoles in the excited state to be rationalized and, more generally, a deeper understanding of the factors governing the ESIPT process to be obtained, a crucial point in the design of new and efficient fluorophores.

Benzannulation of a typical fluorophore reveals the interplay between ESIPT, excited-state aromaticity and intramolecular charge transfer.

Visualizing mitochondria and mouse intestine with a fluorescent complex of a naphthalene-based dipolar dye and serum albumin

A fluorophore–protein complex for the visualization of mitochondria and the mouse intestine was developed. The complex formation of a naphthalene-based dipolar dye and serum albumin was identified and its imaging applications were investigated.