A Facile Approach to Fabricate Dual Purpose Hybrid Materials for Tissue Engineering and Water Remediation

A comprehensive review on the metal-based green valorized nanocomposite for the remediation of emerging colored organic waste

In today's era, "green" synthesis is an emerging research trend. It has gained widespread attention owing to its dynamic behavior, reliability, simplicity, sustainability, and environment friendly approach for fabricating various nanomaterials. Green fabrication of metal/metal oxides nanomaterials, hybrid materials, and other metal-based nanocomposite can be utilized to remove toxic colored aqueous pollutants. Nanomaterials synthesized by using green approach is considered to be the significant tool to minimize unwanted or harmful by-products otherwise released from traditional synthesis methods. Various kinds of biosynthesized nanomaterials, such as animal waste and plant-based, have been successfully applied and well documented in the literature. However, their application part, especially for the cure of colored organic polluted water, has not been reported as a single review article. Therefore, the current work aims to assemble reports on using novel biosynthesized green metal-based nanomaterials to exclude harmful dyes from polluted water.

Studies on stabilization of collagen using Cr-doped polydopamine complex

The stabilization of collagen using different small molecules have been explored for the development of biomaterials. One of the most studied molecules in biomaterials research is polydopamine (PDA) due to its ability to bind to different substrates that ranges from metal surface to collagen. Similarly, in leather tanning, chromium has been an extensively used metal ion as it binds strongly with collagen and enhances its stability. However, as per regulatory authority, the presence of chromium in leather has been restricted to minimum level. Here, we studied the application of chromium doped polydopamine (Cr-PDA) complex as collagen stabilizing agent. The preparation and characterization of Cr-PDA were confirmed using FE-SEM, DLS and FT-IR techniques. Cr-PDA did not alter the triple helical structure of collagen as evidenced from the CD spectral data. Cr-PDA delays the fibrillation in collagen compared to collagen or PDA alone. Calorimetric data shows the enhanced stability of collagen when treated with Cr-PDA compared to collagen control but lesser than PDA alone. Viscometry studies have shown that Cr-PDA reduces the viscosity of collagen compared to PDA or collagen alone. Contact angle studies showed that PDA and Cr-PDA imparts more hydrophobicity to collagen compared to control. Tensile strength studies showed that addition of Cr-PDA or PDA increases the tensile strength of the collagen fiber. The present study on stabilization of collagen using Cr-PDA might be helpful in development of crosslinking agents with eco-friendly approach.

Lanthanum oxide nanoparticle-collagen bio matrix induced endothelial cell activation for sustained angiogenic response for biomaterial integration

Rare earth lanthanum oxide nanoparticle reinforced collagen biomatrix that elicited the endothelial cell activation to promote angiogenesis for biomaterial integration was developed and evaluated in the present study. The structural integrity of collagen was not compromised on crosslinking of lanthanum oxide nanoparticle to collagen biomolecule. As-synthesised collagen biomatrix was shown to have improved mechanical strength, a lesser susceptibility to proteolytic degradation and good swelling properties. Superior cytocompatibility, hemocompatibility and minimal ROS generation was observed with Lanthanum oxide nanoparticle reinforced collagen bio matrix. The Lanthanum oxide nanoparticle reinforced collagen bio matrix elicited endothelial cell activation eliciting pro-angiogensis as observed in tube formation and aortic arch assays. The bio-matrix promoted the infiltration and proliferation of endothelial cells which is an unexplored domain in the area of tissue engineering that is very essential for biomaterial integration into host tissue. The wound healing effect of Lanthanum oxide nanoparticle stabilized collagen showed enhanced cell migration in vitro in cells maintained in Lanthanum oxide nanoparticle reinforced collagen bio matrix. The study paves the way for developing rare earth-based dressing materials which promoted biomatrix integration by enhancing vascularisation for tissue regenerative applications in comparison with traditional biomaterials.

Dual functional carbonate-hydroxyapatite nanocomposite from Pinctada maxima and egg-white for bone tissue engineering

This study aims to design a 3D carbonate-hydroxyapatite (CHA)/sago (S) based egg white (EW) microstructure with antibacterial properties to improve the performance of bone grafts for bone tissue engineering. In this study, Pinctada maxima (P. maxima) shell was used as a calcium (Ca) source in CHA synthesis. The annealing temperature of CHA at 900, 1000, and 1100 °C affected microstructural and lattice parameters, with stoichiometry 1.72-1.77, and B-type CHA was identified. CHA/S with various concentrations of EW (10 and 30 wt.%) effectively increased pore size and porosity. XRD spectra confirmed that sago and EW in CHA nanocomposite stable the crystal structure. FTIR spectrum shows protein phosphorylation in CHA nanocomposite due to PO₄^3- ion exchange. In-vitro bioactivity of CHA-S10 (MTT assay) showed increased cell viability and optical density (OD; 24-48 h) to control. Antibacterial activity of CHA-S10 and CHA/S (control) against bacteria associated with periodontal disease and bone infection (Actinobacillus actinomycetemcomitans [A. actinomycetemcomitans], Porphyromonas gingivalis [P. gingivalis], Fusobacterium nucleatum [F. nucleatum; gram negative], and Staphylococcus aureus [S. aureus; gram positive]) by disc diffusion method showed that CHA-S10 and CHA/S had strong antibacterial activity. In conclusion, EW's properties had proven the CHA/S/EW as bone grafts, effectively increasing pore size, porosity, biocompatibility, and strong antibacterial properties.

Polysaccharide-Based Membrane Biocompatibility Study of Anacardium occidentale L. and Polyvinyl Alcohol after Subcutaneous Implant in Rats

Polymeric membranes are a viable and sustainable option for the biotechnology industry from an economic and environmental point of view. In this study, we evaluated tissue response and tolerance to the implantation of a polymeric membrane prepared with cashew gum polysaccharide (CGP) associated with polyvinyl alcohol (PVA). The objective was to characterize the biocompatibility of the CGP/PVA membrane in vivo. Following the evaluation criteria of the ISO 10993-6 standard, we demonstrated that the CGP/PVA membrane showed moderate tissue reaction, with a non-irritating ISO pattern, a thinner fibrous capsule, and a smaller amount of collagen compared to the positive control group. At 30 and 60 days, the membrane presented a similar amount of mast cells to that observed in the negative control group. The data demonstrate that the CGP/PVA membrane presents biocompatibility in accordance with the ISO 10993-6 standard.

Polyurethane-Nanolignin Composite Foam Coated with Propolis as a Platform for Wound Dressing: Synthesis and Characterization

This piece of research explores porous nanocomposite polyurethane (PU) foam synthesis, containing nanolignin (NL), coated with natural antimicrobial propolis for wound dressing. PU foam was synthesized using polyethylene glycol, glycerol, NL, and 1, 6-diisocyanato-hexane (NCO/OH ratio: 1.2) and water as blowing agent. The resultant foam was immersed in ethanolic extract of propolis (EEP). PU, NL-PU, and PU-NL/EEP foams were characterized from mechanical, morphological, and chemical perspectives. NL Incorporation into PU increased mechanical strength, while EEP coating showed lower strength than PU-NL/EEP. Morphological investigations confirmed an open-celled structure with a pore diameter of 150-200 μm, a density of nearly 0.2 g/cm3,, and porosity greater than 85%, which led to significantly high water absorption (267% for PU-NL/EEP). The hydrophilic nature of foams, measured by the contact angle, proved to be increased by NL addition and EEP coating. PU and PU-NL did not show important antibacterial features, while EEP coating resulted in a significant antibacterial efficiency. All foams revealed high biocompatibility toward L929 fibroblasts, with the highest cell viability and cell attachment for PU-NL/EEP. In vivo wound healing using Wistar rats' full-thickness skin wound model confirmed that PU-NL/EEP exhibited an essentially higher wound healing efficacy compared with other foams. Hence, PU-NL/EEP foam could be a promising wound dressing candidate.

Natural-Based Biomaterial for Skin Wound Healing (Gelatin vs. Collagen): Expert Review

Collagen (Col) and gelatin are most extensively used in various fields, particularly in pharmaceuticals and therapeutics. Numerous researchers have proven that they are highly biocompatible to human tissues, exhibit low antigenicity and are easy to degrade. Despite their different sources both Col and gelatin have almost the same effects when it comes to wound healing mechanisms. Considering this, the bioactivity and biological effects of both Col and gelatin have been, and are being, constantly investigated through in vitro and in vivo assays to obtain maximum outcomes in the future. With regard to their proven nutritional values as sources of protein, Col and gelatin products exert various possible biological activities on cells in the extracellular matrix (ECM). In addition, a vast number of novel Col and gelatin applications have been discovered. This review compared Col and gelatin in terms of their structures, sources of derivatives, physicochemical properties, results of in vitro and in vivo studies, their roles in wound healing and the current challenges in wound healing. Thus, this review provides the current insights and the latest discoveries on both Col and gelatin in their wound healing mechanisms.

Bioengineered Hybrid Collagen Scaffold Tethered with Silver-Catechin Nanocomposite Modulates Angiogenesis and TGF-β Toward Scarless Healing in Chronic Deep Second Degree Infected Burns

Management of burn wounds with diabetes and microbial infection is challenging in tissue engineering. The delayed wound healing further leads to scar formation in severe burn injury. Herein, a silver-catechin nanocomposite tethered collagen scaffold with angiogenic and antibacterial properties is developed to enable scarless healing in chronic wounds infected with Pseudomonas aeruginosa under diabetic conditions. Histological observations of the granulation tissues collected from an experimental rat model show characteristic structural organizations similar to normal skin, whereas the open wound and pristine collagen scaffold treated animals display elevated dermis with thick epidermal layer and lack of appendages. Epidermal thickness of the hybrid scaffold treated diabetic animals is lowered to 33 ± 2 µm compared to 90 ± 2 µm for pristine collagen scaffold treated groups. Further, the scar elevation index of 1.3 ± 0.1 estimated for the bioengineered scaffold treated diabetic animals is closer to the normal skin. Immunohistochemical analyses provide compelling evidence for the enhanced angiogenesis as well as downregulated transforming growth factor- β1 (TGF-β1) and upregulated TGF-β3 expressions in the hybrid scaffold treated animal groups. The insights from this study endorse the bioengineered collagen scaffolds for applications in tissue regeneration without scar in chronic burn wounds.

A Novel Bilayer Wound Dressing Composed of a Dense Polyurethane/Propolis Membrane and a Biodegradable Polycaprolactone/Gelatin Nanofibrous Scaffold

One-layer wound dressings cannot meet all the clinical needs due to their individual characteristics and shortcomings. Therefore, bilayer wound dressings which are composed of two layers with different properties have gained lots of attention. In the present study, polycaprolactone/gelatin (PCL/Gel) scaffold was electrospun on a dense membrane composed of polyurethane and ethanolic extract of propolis (PU/EEP). The PU/EEP membrane was used as the top layer to protect the wound area from external contamination and dehydration, while the PCL/Gel scaffold was used as the sublayer to facilitate cells' adhesion and proliferation. The bilayer wound dressing was investigated regarding its microstructure, mechanical properties, surface wettability, anti-bacterial activity, biodegradability, biocompatibility, and its efficacy in the animal wound model and histopathological analyzes. Scanning electron micrographs exhibited uniform morphology and bead-free structure of the PCL/Gel scaffold with average fibers' diameter of 237.3 ± 65.1 nm. Significant anti-bacterial activity was observed against Staphylococcal aureus (5.4 ± 0.3 mm), Escherichia coli (1.9 ± 0.4 mm) and Staphylococcus epidermidis (1.0 ± 0.2 mm) according to inhibition zone test. The bilayer wound dressing exhibited high hydrophilicity (51.1 ± 4.9°), biodegradability, and biocompatibility. The bilayer wound dressing could significantly accelerate the wound closure and collagen deposition in the Wistar rats' skin wound model. Taking together, the PU/EEP-PCL/Gel bilayer wound dressing can be a potential candidate for biomedical applications due to remarkable mechanical properties, biocompatibility, antibacterial features, and wound healing activities.

Silica microsphere–resorcinol composite embedded collagen scaffolds impart scar-less healing of chronic infected burns in type-I diabetic and non-diabetic rats

Biocompatible hybrid collagen scaffolds embedded with a silica–resorcinol composite promote scar-less wound healing in chronically infected deep second-degree burns.

Engineered Three-Dimensional Microenvironments with Starch Nanocrystals as Cell-Instructive Materials

Naturally, cells reside in three-dimensional (3D) microenvironments composed of biopolymers that guide cellular behavior via topographical features as well as through mechanical and biochemical cues. However, most studies describing the influence of topography on cells' behavior are performed on rigid and synthetic two-dimensional substrates. To design systems that more closely resemble native microenvironments, herein we develop 3D nanocomposite hydrogels consisting of starch nanocrystals (SNCs) embedded in a gelatin matrix. The incorporation of different concentrations of SNCs (0.05, 0.2, and 0.5 wt %) results in an increase of compressive modulus when compared to hydrogels without SNCs, without affecting the swelling ratio, thus providing a tunable system. Confirming the cytocompatibility of the novel composites, the viability of encapsulated L929 fibroblasts is >90% in all hydrogels. The cellular metabolic activity and DNA content are similar for all formulations and increase over time, indicating that the fibroblasts proliferate within the hydrogels. After 4 d of culture, Live/Dead staining and F-actin/nuclei staining show that the encapsulated fibroblasts develop an elongated morphology in the hydrogels. On the other hand, encapsulated chondrogenic progenitor ATDC5 cells also maintain a viability around 90% but display a round morphology, especially in the hydrogels with SNCs, indicating a potential application of the materials for cartilage tissue engineering. We believe that topographical and mechanical cues within 3D microenvironments can be a powerful tool to instruct cells' behavior and that the developed gelatin/SNC nanocomposite warrants further study.