Structural, luminescence and thermometric properties of nanocrystalline YVO4:Dy3+ temperature and concentration series

Effect of annealing conditions on the luminescence properties and thermometric performance of Sr3Al2O5Cl2:Eu2+ and SrAl2O4:Eu2+ phosphors

We report on the synthesis, photoluminescence optimization and thermometric properties of Sr3Al2O5Cl2:Eu2+ and SrAl2O4:Eu2+ phosphor powders. The photoluminescence of Sr2.9Al2O5Cl2:0.1Eu2+ phosphors exhibits a blue-shift with an increasing annealing temperature owing to a decrease in the crystal field strength of the host caused by evaporation of Cl from the material. The quenching of the blue band in favour of the red band observed in the luminescence spectra of Sr2.9Al2O5Cl2:0.1Eu2+ with an increased annealing temperature was explained using the mechanism of the Landau-Zener transitions. The quantum yield and the lifetime of the phosphors depend on the annealing temperature. Phosphor samples annealed at 850 °C, 1000 °C, 1200 °C and 1500 °C were found to be potential luminescence thermometers using the luminescence spectral method. For Sr3Al2O5Cl2:Eu2+ annealed at 1000 °C, the temperature-dependent dual-band intensity ratio demonstrated a high-temperature sensitivity of ∼1.47%/°C in the temperature range of 23 °C to 40 °C which is superior to other reported phosphors with a microsecond decay time, suggesting that the material has potential for sensitive thermometry applications at ambient temperatures.

Multicolor tunable emission through energy transfer in Dy3+/Ho3+ co-doped CaTiO3 phosphors with high thermal stability for solid state lighting applications

The exploration of multicolor emitting phosphors with single phase is extremely important for n-UV chip excited LED/WLED's and multicolor display devices. In this paper, Dy3+, Ho3+ singly doped and Dy3+/Ho3+ co-doped CaTiO3 phosphor materials have been synthesized by solid state reaction method at 1473 K. The synthesized materials were characterized by XRD, FE-SEM, EDX, FTIR, PL and lifetime measurements. The PL emission spectra of Dy3+ doped CaTiO3 phosphors give intense blue and yellow emissions under UV excitation, while the PL emission spectra of Ho3+ doped CaTiO3 phosphor show intense green emission under UV/blue excitations. Further, to get the multicolor emission including white light, Dy3+ and Ho3+ were co-doped simultaneously in CaTiO3 host. It is found that alongwith colored and white light emissions, it also shows energy transfer from Dy3+ to Ho3+ with 367 nm and from Ho3+ to Dy3+ under 362 nm excitations. The energy transfer efficiency is found to be 67.76% and 69.39% for CaTiO3:4Dy3+/3Ho3+ and CaTiO3:3Ho3+/5Dy3+ phosphors, respectively. The CIE color coordinates, CCT and color purity of the phosphors have been calculated, which show color tunability from whitish to deep green via greenish yellow color. The lifetime of 4F9/2 level of Dy3+ ion and 5S2 level of Ho3+ ion is decreased in presence of Ho3+ and Dy3+ ions, respectively. This is due to energy transfer from Dy3+ to Ho3+ ions and vice versa. A temperature dependent photoluminescence studied of CaTiO3:4Dy3+/2Ho3+ phosphor show a high thermal stability (82% at 423 K of initial temperature 303 K) in the temperature range 303-483 K with activation energy 0.17 eV. The PLQY are 30%, 33% and 35% for CaTiO3:4Dy3+, CaTiO3:4Dy3+/2Ho3+ and CaTiO3:3Ho3+ phosphors, respectively. Hence, Dy3+, Ho3+ singly doped and Dy3+/Ho3+ co-doped CaTiO3 phosphor materials can be used in the field of single matrix perovskite color tunable phosphors which may be used in multicolor display devices, n-UV chip excited LED/WLED's and photodynamic therapy for the cancer treatment.

Rare earth metals detection and recognition based on laser induced breakdown spectroscopy and machine learning

The rapid detection and identification of the electronic waste (e-waste) containing rare earth (RE) elements is of great significance for the recycling of RE elements. However, the analysis of these materials is extremely challenging due to extreme similarities in appearance or chemical composition. In this research, a new system based on laser induced breakdown spectroscopy (LIBS) and machine learning algorithms is developed for identifying and classifying e-waste of rare-earth phosphors (REPs). Three different kinds of phosphors are selected and the spectra is monitored using this new developed system. The analysis of phosphor spectra shows that there are Gd, Yd, and Y RE element spectra in the phosphor. The results also verify that LIBS could be used to detect RE elements. An unsupervised learning method, principal component analysis (PCA), is used to distinguish the three phosphors and training data set is stored for further identification. Additionally, a supervised learning method, backpropagation artificial neural network (BP-ANN) algorithm is used to establish a neural network model to identify phosphors. The result show that the final phosphor recognition rate reaches 99.9%. The innovative system based on LIBS and machine learning (ML) has the potential to improve rapid in situ detection of RE elements for the classification of e-waste.

Effect of Gd3+, La3+, Lu3+ Co-Doping on the Morphology and Luminescent Properties of NaYF4:Sm3+ Phosphors

The series of luminescent NaYF₄:Sm³⁺ nano- and microcrystalline materials co-doped by La³⁺, Gd³⁺, and Lu³⁺ ions were synthesized by hydrothermal method using rare earth chlorides as the precursors and citric acid as a stabilizing agent. The phase composition of synthesized compounds was studied by PXRD. All synthesized materials except ones with high La³⁺ content (where LaF₃ is formed) have a β-NaYF₄ crystalline phase. SEM images demonstrate that all particles have shape of hexagonal prisms. The type and content of doping REE significantly effect on the particle size. Upon 400 nm excitation, phosphors exhibit distinct emission peaks in visible part of the spectrum attributed to ⁴G_5/2→⁶H_J transitions (J = 5/2-11/2) of Sm³⁺ ion. Increasing the samarium (III) content results in concentration quenching by dipole-dipole interactions, the optimum Sm³⁺concentration is found to be of 2%. Co-doping by non-luminescent La³⁺, Gd³⁺ and Lu³⁺ ions leads to an increase in emission intensity. This effect was explained from the Sm³⁺ local symmetry point of view.

Brightly Luminescent (TbxLu1-x)2bdc3·nH2O MOFs: Effect of Synthesis Conditions on Structure and Luminescent Properties

Luminescent, heterometallic terbium(III)-lutetium(III) terephthalate metal-organic frameworks (MOFs) were synthesized via direct reaction between aqueous solutions of disodium terephthalate and nitrates of corresponding lanthanides by using two methods: synthesis from diluted and concentrated solutions. For (Tb_xLu_1-x)₂bdc₃·nH₂O MOFs (bdc = 1,4-benzenedicarboxylate) containing more than 30 at. % of Tb³⁺, only one crystalline phase was formed: Ln₂bdc₃·4H₂O. At lower Tb³⁺ concentrations, MOFs crystallized as the mixture of Ln₂bdc₃·4H₂O and Ln₂bdc₃·10H₂O (diluted solutions) or Ln₂bdc₃ (concentrated solutions). All synthesized samples that contained Tb³⁺ ions demonstrated bright green luminescence upon excitation into the ¹ππ* excited state of terephthalate ions. The photoluminescence quantum yields (PLQY) of the compounds corresponding to the Ln₂bdc₃ crystalline phase were significantly larger than for Ln₂bdc₃·4H₂O and Ln₂bdc₃·10H₂O phases due to absence of quenching from water molecules possessing high-energy O-H vibrational modes. One of the synthesized materials, namely, (Tb_0.1Lu_0.9)₂bdc₃·1.4H₂O, had one of the highest PLQY among Tb-based MOFs, 95%.

Combustion Synthesis and Study of Double Charge Transfer in Highly Efficient Cool White-emitting Dy3+ Activated Vanadate-based Nanophosphor for Advanced Solid-state Lighting

A series of Ca₉Gd(VO₄)₇: Dy³⁺ (x = 0.01-0.20) nanophosphor crystals emitting a cool white light were synthesized by solution combustion methodology. The X-ray diffraction patterns were analyzed and processed using Rietveld refinement. The fabricated nanophosphor was found to crystallize in a trigonal crystal lattice with space group R3c(161). The morphological behavior of the prepared nanophosphor was investigated using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The photoluminescence properties of the nanophosphor correspond to cool white emission upon near-ultraviolet (NUV) excitation at 327 nm due to ⁴F_9/2 → ⁶H_15/2 (bluish) and ⁴F_9/2 → ⁶H_13/2 (yellowish) radiative relaxations at 487 nm and 576 nm respectively. Also, there is a strong occurrence of double charge transfer from O^2- ions to Dy³⁺ and V⁵⁺ ions with the latter being stronger due to the high positive charge of V⁵⁺ ions. Color coordinates (x = 0.2878, y = 0.3259) are consistent with white emission. Auzel's model was implemented to examine the non-radiative relaxation (113.5 ms^-1), radiative lifetime (1.4856 ms), and quantum efficiency (83.13%) values. The crystalline and optical behavior of the synthesized cool white emitting nanophosphor facilitates its use in near-UV-based WLEDs and other advanced solid-state lighting.

Bismuth and Vanadium-Substituted Yttrium Phosphates for Cool Coating Applications

Luminescent yttrium phosphate is engineered into an environmentally benign near infrared (NIR) reflective yellow pigment by the substitution of bismuth and vanadium metals in the host lattice. A series of YP_(1-x)V _x O₄ (x = 0, 0.05, 0.1, 0.15, 0.2, and 0.4), Y_(1-y)Bi _y PO₄ (y = 0.1 and 0.3), and Y_(1-y)Bi _y P_(1-x)V _x O₄ (x = y = 0.2, 0.4, and 0.6) were prepared by the precipitation method. Secondary phase was noticed at x = 0.2 and y = 0.2 while substituting vanadium and bismuth, respectively, due to high ionic radii of the dopant ions. Co substitution of vanadium and bismuth in the YPO₄ lattice enhanced both NIR reflectance and yellow color of all the fabricated materials. XPS spectra proved the presence of trivalent bismuth and pentavalent vanadium in Y_0.4Bi_0.6P_0.4V_0.6O₄. Due to the substitution effect, a more defined morphology was noticed, which enhanced the scattering co-efficient of the fabricated materials; hence, the NIR reflectance of the materials was increased from 68% (YPO₄) to 83% (Y_0.4Bi_0.6P_0.4V_0.6O₄). Chemical and thermal stability test of Y_0.4Bi_0.6P_0.4V_0.6O₄ confirmed the color and strength of the designed pigment. With good yellow hue (b* = +56.06), high NIR solar reflectance (R* = 83%), and good stability, Y_0.4Bi_0.6P_0.4V_0.6O₄ can act as an environmentally benign cool yellow pigment.

Evolution of Highly Biocompatible and Thermally Stable YVO4:Er3+/Yb3+ Upconversion Mesoporous Hollow Nanospheriods as Drug Carriers for Therapeutic Applications

In recent times, upconversion nanomaterials with mesoporous hollow structures have gained significant interest as a prospective nano-platform for cancer imaging and therapeutic applications. In this study, we report a highly biocompatible YVO₄:1Er³⁺/10Yb³⁺ upconversion mesoporous hollow nanospheriods (YVO₄:Er³⁺/Yb³⁺ UC-MHNSPs) by a facile and rapid self-sacrificing template method. The Rietveld analysis confirmed their pure phase of tetragonal zircon structure. Nitrogen adsorption–desorption isotherms revealed the mesoporous nature of these UC-MHNSPs and the surface area is found to be ~87.46 m²/g. Under near-infrared excitation (980 nm), YVO₄:Er³⁺/Yb³⁺ UC-MHNSPs showed interesting color tunability from red to green emission. Initially (at 0.4 W), energy back transfer from Er³⁺ to Yb³⁺ ions leads to the strong red emission. Whereas at high pump powers (1 W), a fine green emission is observed due to the dominant three-photon excitation process and traditional energy transfer route from Er³⁺ to Yb³⁺ ions. The bright red light from the membrane of HeLa cells confirmed the effective cellular uptake of YVO₄:Er³⁺/Yb³⁺ UC-MHNSPs. The resonant decrease in cell viability on increasing the concentration of curcumin conjugated YVO₄:Er³⁺/Yb³⁺ UC-MHNSPs established their excellent antitumor activity. Therefore, the acquired results indicate that these YVO₄:Er³⁺/Yb³⁺ UC-MHNSPs are promising drug carriers for bioimaging and various therapeutic applications.

Dual-center co-doped and mixed ratiometric LuVO4:Nd3+/Yb3+nanothermometers

During last decade luminescence thermometry has become a widely studied research field due to its potential applications for real time contactless temperature sensing where usual thermometers cannot be used. Special attention is paid to the development of accurate and reliable thermal sensors with simple reading. To address existing problems of ratiometric thermometers based on thermally-coupled levels, LuVO₄:Nd³⁺/Yb³⁺thermal sensors were studied as a proof-of-concept of dual-center thermometer obtained by co-doping or mixture. Both approaches to create a dual-center sensor were compared in terms of energy transfer efficiency, relative sensitivity, and temperature resolution. Effect of excitation mechanism and Yb³⁺doping concentration on thermometric performances was also investigated. The best characteristics ofS_r = 0.34% K^-1@298 K and ΔT = 0.2 K were obtained for mixed phosphors upon host excitation.

Upconverting NIR-to-NIR LuVO4:Nd3+/Yb3+ Nanophosphors for High-Sensitivity Optical Thermometry

Accurate contactless thermometry is required in many rapidly developing modern applications such as biomedicine, micro- and nanoelectronics, and integrated optics. Ratiometric luminescence thermal sensing attracts a lot of attention due to its robustness toward systematic errors. Herein, a phonon-assisted upconversion in LuVO₄:Nd³⁺/Yb³⁺ nanophosphors was successfully applied for temperature measurements within the 323-873 K range via the luminescence intensity ratio technique. Dual-activating samples were obtained by codoping and mixing single-doped nanopowders. The effect of the type of dispersion system and the Yb³⁺ doping concentration was studied in terms of thermometric performances. The relative thermal sensitivity reached a value of 2.6% K^-1, while the best temperature resolution was 0.2 K. The presented findings show the way to enhance the thermometric characteristics of contactless optical sensors.

Synthesis of ZrO2:Pr3+,Gd3+ nanocrystals for optical thermometry with a thermal sensitivity above 2.32% K-1 over 270 K of sensing range

Nowadays, there is enthusiastic effort to develop luminescent thermometers used for remote and high-sensitivity temperature readout over a wide sensing range. Herein, Pr³⁺ and Gd³⁺ co-doped ZrO₂ nanocrystals are designed, prepared and investigated by XRD, Raman spectroscopy, XPS, TEM, EDS, DRS, PLE and PL spectroscopy. Upon 275 nm irradiation, the PL spectrum of ZrO₂:Pr³⁺,Gd³⁺ is found to be composed of a narrow emission peak at 314 nm (Gd^{3+ 6}P_7/2-⁸S_7/2), a broad defect-related emission band at 400 nm, and several emission peaks in the wavelength region of 585-700 nm (Pr^{3+ 1}D₂-³H₄, ³P₀-³H₆, and ³P₀-³F₂), which exhibit different thermal responses owing to the effects of the various non-radiative relaxation processes and trap energy levels. Accordingly, the luminescence intensity ratio (LIR) between the Pr^{3+ 1}D₂-³H₄ and Gd^{3+ 6}P_7/2-⁸S_7/2 transitions demonstrates excellent relative sensing sensitivity values ((2.32 ± 0.01)% K^-1-(8.32 ± 0.05)% K^-1) and low temperature uncertainties (0.08 K-0.28 K) over a wide temperature sensing range of 303 K to 573 K, which are remarkably better than those of many other luminescence thermometers. What is discussed in the present study may be conducive to broadening the research region of RE³⁺ doped luminescence thermometric phosphors, especially for materials with rich 4f-4f transition lines and defect-related luminescence.

NIR emission of lanthanides for ultrasensitive luminescence manometry-Er3+-activated optical sensor of high pressure

Pressure is an important physical parameter and hence its monitoring is very important for different industrial and scientific applications. Although commonly used luminescent pressure sensors (ruby-Al₂O₃:Cr³⁺ and SrB₄O₇:Sm²⁺) allow optical monitoring of pressure in compressed systems (usually in a diamond anvil cell; DAC), their detection resolution is limited by sensitivity, i.e., pressure response in a form of the detected spectral shift. Here we report, a breakthrough in optical pressure sensing by developing an ultra-sensitive NIR pressure sensor (dλ/dP = 1.766 nm GPa^-1). This luminescent manometer is based on the optically active YVO₄:Yb³⁺-Er³⁺ phosphor material which exhibits the largest spectral shift as a function of pressure compared to other luminescent pressure gauges reported elsewhere. In addition, thanks to the locations of excitation and emission in the NIR range, the developed optical manometer allows high-pressure measurements (without spectral overlapping/interferences) of various luminescent organic and inorganic materials, which are typically excited and can emit in the UV-vis spectral ranges.

The effect of Eu3+ and Gd3+ co-doping on the morphology and luminescence of NaYF4:Eu3+, Gd3+ phosphors

Eu³⁺ and Gd³⁺ doping results in the size reduction of β-NaYF₄: Eu³⁺, Gd³⁺ microparticles; Gd³⁺ co-doping enhances the luminescence intensity.

Luminescent Nanothermometer Operating at Very High Temperature-Sensing up to 1000 K with Upconverting Nanoparticles (Yb3+/Tm3+)

Lanthanide-based luminescent nanothermometers play a crucial role in optical temperature determination. However, because of the strong thermal quenching of the luminescence, as well as the deterioration of their sensitivity and resolution with temperature elevation, they can operate in a relatively low-temperature range, usually from cryogenic to ≈800 K. In this work, we show how to overcome these limitations and monitor very high-temperature values, with high sensitivity (≈2.1% K^-1) and good thermal resolution (≈1.4 K) at around 1000 K. As an optical probe of temperature, we chose upconverting Yb³⁺-Tm³⁺ codoped YVO₄ nanoparticles. For ratiometric sensing in the low-temperature range, we used the relative intensities of the Tm³⁺ emissions associated with the ³F_2,3 and ³H₄ thermally coupled levels, that is, ³F_2,3 → ³H₆/³H₄ → ³H₆ (700/800 nm) band intensity ratio. In order to improve sensitivity and resolution in the high-temperature range, we used the 940/800 nm band intensity ratio of the nonthermally coupled levels of Yb³⁺ (²F_5/2 → ²F_7/2) and Tm³⁺ (³H₄ → ³H₆). These NIR bands are very intense, even at extreme temperature values, and their intensity ratio changes significantly, allowing accurate temperature sensing with high thermal and spatial resolutions. The results presented in this work may be particularly important for industrial applications, such as metallurgy, catalysis, high-temperature synthesis, materials processing and engineering, and so forth, which require rapid, contactless temperature monitoring at extreme conditions.

Switchable cool and cold white emission from dysprosium doped SrZnO2

In presented work, excitation selective novel cool and cold white emission is reported from dysprosium (Dy) doped SrZnO2nanophosphors, synthesized by combustion technique. The host lattice provided selective excitation routes for Dy3+levels and intrinsic defects levels via charge transfer (270 nm) and host defects absorption bands (375 nm), respectively. The emission due to Dy3+levels was found to be exhibiting cool white emission and that from intrinsic defects was cold white emission, as characterized from correlated color temperature. UV irradiated glow curve analysis complemented the results by exhibiting signal due to Dy assisted traps on near UV exposure (254 nm) and that of host related traps at far UV exposure (365 nm). The luminescence phenomenon is comprehended through proposed band model. The obtained results proclaimed SrZnO2:Dy as a potential member among white emitting phosphors to be used as standard daylight sources in commercial and aesthetic lighting.

Luminescence Quenching Behavior of Hydrothermally Grown YVO4:Eu3+ Nanophosphor Excited under Low Temperature and Vacuum Ultra Violet Discharge

The luminescence quenching behavior and energy transfer process in hydrothermally grown Eu³⁺-doped YVO₄ nanophosphors were studied using low temperature photoluminescence spectroscopy. The luminescence efficiency of nanophosphor is dependent on the acidity of its solution media and the post annealing condition after hydrothermal processing. The overall results suggest that the abnormal luminescence behavior of Eu³⁺-doped nanocrystalline YVO₄ under low temperature photoexcitation is due to the incorporated non-radiative hydroxyl groups often encountered in hydrothermal synthesis as well as to the inefficient energy transfer to luminescent ions from vanadate groups.

Sensors for optical thermometry based on luminescence from layered YVO4: Ln3+ (Ln = Nd, Sm, Eu, Dy, Ho, Er, Tm, Yb) thin films made by atomic layer deposition

Below the Earth’s crust, temperatures may reach beyond 600 K, impeding the batteries used to power conventional thermometers. Fluorescence intensity ratio based temperature probes can be used with optical fibers that can withstand these conditions. However, the probes tend to exhibit narrow operating ranges and poor sensitivity above 400 K. In this study, we have investigated single and dual layered YVO₄: Ln³⁺ (Ln = Nd, Sm, Eu, Dy, Ho, Er, Tm, Yb) thin films (100–150 nm) for use in fluorescence intensity ratio based temperature sensors in the 300–850 K range. The type of lanthanide emission can be fine-tuned by adjusting the thickness of each layer, and the layered structure allows for emission from otherwise incompatible lanthanide pairs. This novel multi-layered approach enables high sensitivity over a broad temperature range. The highest relative sensitivity was achieved for a dual layered YVO₄: Eu³⁺/YVO₄: Dy³⁺ sample, exhibiting a maximum sensitivity of 3.6% K⁻¹ at 640 K. The films were successfully deposited on all tested substrates (silicon, iron, aluminum, glass, quartz, and steel), and can be applied homogenously to most surfaces without the use of binders. The films are unaffected by water, enabling non-contact temperature sensing in water, where IR thermometers are not an option.