Influence of Cell Spreading Area on the Osteogenic Commitment and Phenotype Maintenance of Mesenchymal Stem Cells

Innovative approaches to tissue engineering: Utilizing decellularized extracellular matrix hydrogels for mesenchymal stem cell transport

In recent years, the realm of tissue regeneration experienced significant advancements, leading to the development of innovative therapeutic agents. The systemic delivery of mesenchymal stem cells (MSCs) emerged as a promising strategy for promoting tissue regeneration. However, this approach is hindered by hurdles such as poor cell survival, limited cell propagation, and inadequate cell integration. Decellularized extracellular matrix (dECM) hydrogel serves as an innovative carrier that protects MSCs from the detrimental effects of the hostile microenvironment, facilitates their localization and retention at the injection site, and preserves their viability. Regarding its low immunogenicity, low cytotoxicity, high biocompatibility, and its ability to mimic natural extracellular matrix (ECM), this natural hydrogel offers a new avenue for systemic delivery of MSCs. This review digs into the properties of dECM hydrogels (dECMHs), the methods employed for decellularization and the utilization of dECMH as carriers for various types of MSCs for tissue regeneration purposes. This review also sheds light on the benefits of hybrid hydrogels composed of dECMH and other components such as proteins and polysaccharides. By addressing the limitations of conventional hydrogels and enhancing efficacy of cell therapy, dECMH opens new pathways for the future of tissue regeneration.

In Vitro Osteo-Immunological Responses of Bioactive Calcium Phosphate-Containing Urethane Dimethacrylate-Based Composites: A Potential Alternative to Poly(methyl methacrylate) Bone Cement

This investigation developed new composite bone cements using urethane dimethacrylate (UDMA), poly(propylene glycol) dimethacrylate (PPGDMA), and hydroxyethyl methacrylate (HEMA), with micrometer-sized aluminosilicate glass filler. Monocalcium phosphate monohydrate (MCPM) and hydroxyapatite (HA) particles were added to enhance biological performance, particularly osteo-immunomodulation. Free radical polymerization was triggered by mixing two pastes containing either benzoyl peroxide (BPO, an initiator) or N-tolyglycine glycidyl methacrylate (NTGGMA, an activator). Increasing butylated hydroxytoluene (BHT, an inhibitor) enabled a suitable delay after mixing at 25 °C for placement. At 37 °C, the delay time was reduced and the final conversion was enhanced. Findings also demonstrated the biocompatibility of the developed bone cement toward osteo-immunological cell lineages, including mesenchymal stem cells (MSCs), fibroblasts, osteoclast precursor RAW 246.7 cells, and peripheral blood mononuclear cells (PBMCs). Notably, the cement with both MCPM and HA combined facilitated sufficient MSC growth, enabling subsequent mineralization while concurrently suppressing the proliferation of fibroblasts, osteoclast progenitors, and PBMCs. Furthermore, composite cement exhibited the capacity to differentially regulate osteoblast differentiation, cell-(in)dependent mineralization, osteoclastogenesis, and PBMC-mediated inflammatory responses at both cellular and molecular levels in vitro. These observations suggested their potential use for bone repair, especially in cases of inflammation-associated bone defects.

Steroidogenic differentiation of human amniotic membrane-derived mesenchymal stem cells into a progesterone-/androgen-producing cell lineage by SF-1 and an estrogen-producing cell lineage by WT1-KTS

Background

Sex steroid hormones, primarily synthesized by gonadal somatic cells, are pivotal for sexual development and reproduction. Mice studies have shown that two transcription factors, steroidogenic factor 1 (SF-1) and Wilms' tumor 1 (WT1), are involved in gonadal development. However, their role in human gonadal somatic differentiation remains unclear. We therefore aimed to investigate the roles of SF-1 and WT1 in human gonadal steroidogenic cell differentiation.

Methods

Using a transient lentivirus-mediated gene expression system, we assessed the effects of SF-1 and WT1 expression on the steroidogenic potential of human amniotic membrane-derived mesenchymal stem cells (hAmMSCs).

Results

SF-1 and WT1-KTS, a splice variant of WT1, played distinct roles in human steroidogenic differentiation of hAmMSCs. SF-1 induced hAmMSC differentiation into progesterone- and androgen-producing cell lineages, whereas WT1-KTS promoted hAmMSC differentiation into estrogen-producing cell lineages.

Conclusion

Our findings revealed that SF-1 and WT1-KTS play important roles in human gonadal steroidogenic cell differentiation, especially during ovarian development. These findings may pave the way for future studies on human ovarian differentiation and development.

Revelation of adhesive proteins affecting cellular contractility through reference-free traction force microscopy

Over the past few decades, the critical role played by cellular contractility associated mechanotransduction in the regulation of cell functions has been revealed. In this case, numerous biomaterials have been chemically or structurally designed to manipulate cell behaviors through the regulation of cellular contractility. In particular, adhesive proteins including fibronectin, poly-L-lysine and collagen type I have been widely applied in various biomaterials to improve cell adhesion. Therefore, clarifying the effects of adhesive proteins on cellular contractility has been valuable for the development of biomaterial design. In this study, reference-free traction force microscopy with a well-organized microdot array was designed and prepared to investigate the relationship between adhesive proteins, cellular contractility, and mechanotransduction. The results showed that fibronectin and collagen type I were able to promote the assembly of focal adhesions and further enhance cellular contraction and YAP activity. In contrast, although poly-L-lysine supported cell spreading and elongation, it was inefficient at inducing cell contractility and activating YAP. Additionally, compared with cellular morphogenesis, cellular contraction was essential for YAP activation.

Advances in Regulating Cellular Behavior Using Micropatterns

Micropatterns, characterized as distinct physical microstructures or chemical adhesion matrices on substance surfaces, have emerged as a powerful tool for manipulating cellular activity. By creating specific extracellular matrix microenvironments, micropatterns can influence various cell behaviors, including orientation, proliferation, migration, and differentiation. This review provides a comprehensive overview of the latest advancements in the use of micropatterns for cell behavior regulation. It discusses the influence of micropattern morphology and coating on cell behavior and the underlying mechanisms. It also highlights future research directions in this field, aiming to inspire new investigations in materials medicine, regenerative medicine, and tissue engineering. The review underscores the potential of micropatterns as a novel approach for controlling cell behavior, which could pave the way for breakthroughs in various biomedical applications.

Dynamic Stiffening Hydrogel with Instructive Stiffening Timing Modulates Stem Cell Fate In Vitro and Enhances Bone Remodeling In Vivo

Biomechanical stimuli derived from the extracellular matrix (ECM) extremely tune stem cell fate through 3D and spatiotemporal changes in vivo. The matrix stiffness is a crucial factor during bone tissue development. However, most in vitro models to study the osteogenesis of mesenchymal stem cells (MSCs) are static or stiffening in a 2D environment. Here, a dynamic and controllable stiffening 3D biomimetic model is created to regulate the osteogenic differentiation of MSCs with a dual-functional gelatin macromer that can generate a double-network hydrogel by sequential enzymatic and light-triggered crosslinking reactions. The findings show that these dynamic hydrogels allowed cells to spread and expand prior to the secondary crosslinking and to sense high stiffness after stiffening. The MSCs in the dynamic hydrogels, especially the hydrogel stiffened at the late period, present significantly elevated osteogenic ECM secretion, gene expression, and nuclear localization of Yes-associated protein (YAP) and transcriptional coactivator with PDZ-binding motif (TAZ). In vivo evaluation of animal experiments further indicates that the enhancement of dynamic stiffening on osteogenesis of MSCs substantially promotes bone remodeling. Consequently, this work reveals that the 3D dynamic stiffening microenvironment as a critical biophysical cue not only mediates the stem cell fate in vitro, but also augments bone restoration in vivo.

Chiral Cell Nanomechanics Originated in Clockwise/Counterclockwise Biofunctional Microarrays to Govern the Nuclear Mechanotransduction of Mesenchymal Stem Cells

Cell chirality is extremely important for the evolution of cell morphogenesis to manipulate cell performance due to left-right asymmetry. Although chiral micro- and nanoscale biomaterials have been developed to regulate cell functions, how cell chirality affects cell nanomechanics to command nuclear mechanotransduction was ambiguous. In this study, chiral engineered microcircle arrays were prepared by photosensitive cross-linking synthesis on cell culture plates to control the clockwise/counterclockwise geometric topology of stem cells. Asymmetric focal adhesion and cytoskeleton structures could induce chiral cell nanomechanics measured by atomic force microscopy (AFM) nanoindentation in left-/right-handed stem cells. Cell nanomechanics could be enhanced when the construction of mature focal adhesion and the assembly of actin and myosin cytoskeletons were well organized in chiral engineered stem cells. Curvature angles had a negative effect on cell nanomechanics, while cell chirality did not change cytoskeletal mechanics. The biased cytoskeleton tension would engender different nuclear mechanotransductions by yes-associated protein (YAP) evaluation. The chiral stimuli were delivered into the nuclei to oversee nuclear behaviors. A strong cell modulus could activate high nuclear DNA synthesis activity by mechanotransduction. The results will bring the possibility of understanding the interplay of chiral cell nanomechanics and mechanotransduction in nanomedicines and biomaterials.

Early committed polarization of intracellular tension in response to cell shape determines the osteogenic differentiation of mesenchymal stromal cells

Within the heterogeneous tissue architecture, a comprehensive understanding of how cell shapes regulate cytoskeletal mechanics by adjusting focal adhesions (FAs) signals to correlate with the lineage commitment of mesenchymal stromal cells (MSCs) remains obscure. Here, via engineered extracellular matrices, we observed that the development of mature FAs, coupled with a symmetrical pattern of radial fiber bundles, appeared at the right-angle vertices in cells with square shape. While circular cells aligned the transverse fibers parallel to the cell edge, and moved them centripetally in a counter-clockwise direction, symmetrical bundles of radial fibers at the vertices of square cells disrupted the counter-clockwise swirling and bridged the transverse fibers to move centripetally. In square cells, the contractile force, generated by the myosin IIA-enriched transverse fibers, were concentrated and transmitted outwards along the symmetrical bundles of radial fibers, to the extracellular matrix through FAs, and thereby driving FA organization and maturation. The symmetrical radial fiber bundles concentrated the transverse fibers contractility inward to the linkage between the actin cytoskeleton and the nuclear envelope. The tauter cytoskeletal network adjusted the nuclear-actomyosin force balance to cause nuclear deformability and to increase nuclear translocation of the transcription co-activator YAP, which in turn modulated the switch in MSC commitment. Thus, FAs dynamically respond to geometric cues and remodel actin cytoskeletal network to re-distribute intracelluar tension towards the cell nucleus, and thereby controlling YAP mechanotransduction signaling in regulating MSC fate decision. STATEMENT OF SIGNIFICANCE: We decipher how cellular mechanics is self-organized depending on extracellular geometric features to correlate with mesenchymal stromal cell lineage commitment. In response to geometry constrains on cell morphology, symmetrical radial fiber bundles are assembled and clustered depending on the maturation state of focal adhesions and bridge with the transverse fibers, and thereby establishing the dynamic cytoskeletal network. Contractile force, generated by the myosin-IIA-enriched transverse fibers, is transmitted and dynamically drives the retrograde movement of the actin cytoskeletal network, which appropriately adjusts the nuclear-actomyosin force balance and deforms the cell nucleus for YAP mechano-transduction signaling in regulating mesenchymal stromal cell fate decision.

Mechano-responsive hydrogel for direct stem cell manufacturing to therapy

Bone marrow-derived mesenchymal stem cell (MSC) is one of the most actively studied cell types due to its regenerative potential and immunomodulatory properties. Conventional cell expansion methods using 2D tissue culture plates and 2.5D microcarriers in bioreactors can generate large cell numbers, but they compromise stem cell potency and lack mechanical preconditioning to prepare MSC for physiological loading expected in vivo. To overcome these challenges, in this work, we describe a 3D dynamic hydrogel using magneto-stimulation for direct MSC manufacturing to therapy. With our technology, we found that dynamic mechanical stimulation (DMS) enhanced matrix-integrin β1 interactions which induced MSCs spreading and proliferation. In addition, DMS could modulate MSC biofunctions including directing MSC differentiation into specific lineages and boosting paracrine activities (e.g., growth factor secretion) through YAP nuclear localization and FAK-ERK pathway. With our magnetic hydrogel, complex procedures from MSC manufacturing to final clinical use, can be integrated into one single platform, and we believe this 'all-in-one' technology could offer a paradigm shift to existing standards in MSC therapy.

Viscous Microcapsules as Microbioreactors to Study Mesenchymal Stem/Stromal Cells Osteolineage Commitment

It is essential to design a multifunctional well-controlled platform to transfer mechanical cues to the cells in different magnitudes. This study introduces a platform, a miniaturized bioreactor, which enables to study the effect of shear stress in microsized compartmentalized structures. In this system, the well-established cell encapsulation system of liquefied capsules (LCs) is used as microbioreactors in which the encapsulated cells are exposed to variable core viscosities to experience different mechanical forces under a 3D dynamic culture. The LC technology is joined with electrospraying to produce such microbioreactors at high rates, thus allowing the application of microcapsules for high-throughput screening. Using this platform for osteogenic differentiation as an example, shows that microbioreactors with higher core viscosity which produce higher shear stress lead to significantly higher osteogenic characteristics. Moreover, in this system the forces experienced by cells in each LC are simulated by computational modeling. The maximum wall shear stress applied to the cells inside the bioreactor with low, and high core viscosity environment is estimated to be 297 and 1367 mPa, respectively, for the experimental setup employed. This work outlines the potential of LC microbioreactors as a reliable in vitro customizable platform with a wide range of applications.

Genesis of osteoclasts on calcium phosphate ceramics and their role in material-induced bone formation

Innate immune responses play important roles in material-induced bone formation and such roles were further explored in the current study with an emphasis on M2 macrophages and osteoclastogenesis. With the presence of M-CSF and RANKL, M0 macrophages from FVB mouse bone marrow-derived monocytes (BMMs) fused to osteoclasts with both M2 marker and osteoclast marker at day 5, and such osteoclast formation at day 5 was enhanced when the cells were treated with IL-4 at day 3. With IL-4 treatment alone for 24 h, M0 polarized into M2 macrophages. Conditioned medium of M2 macrophages enhanced osteogenic differentiation of MC3T3-E1 (pre-osteoblasts) while osteoclast conditioned medium enhanced osteogenic differentiation of CRL-12424 (osteogenic precursors). TCPs (a typical osteoinductive material) supported M2 macrophage polarization at day 4 and osteoclast formation at day 5, while TCPb (a typical non-osteoinductive material) was less effective. Moreover, osteoclasts formed on TCPs produced osteogenic factors including S1P, Wnt10B and BMP-6, resulting osteogenic differentiation of CRL-12424 cells. Similar to in vitro testing, TCPs favored M2 macrophage polarization followed by the formation of osteoclasts in vivo, as compared to TCPb. The overall data provided evidence of a coupling between M2 macrophages, osteoclasts and material-induced bone formation: osteoclasts formed from M2 macrophages secrete osteogenic cytokines to induce osteogenic differentiation of osteogenic precursor cells to finally form bone. The current findings outlined a biological mechanism of material-induced bone formation and further rationalized the use of osteoinductive materials for bone regeneration. STATEMENT OF SIGNIFICANCE: This paper provides evidence for finding out the relationship between M2 macrophages, osteoclasts and osteogenesis in material-induced bone formation. It suggested that osteoinductive materials enhanced macrophage polarization to M2 macrophages which fuses to osteoclasts, osteoclasts subsequently secret osteogenic cytokines to differentiate finally osteogenic precursors to form bone in osteoinductive materials. The data supports scientifically the superiority of osteoinductive materials for bone regeneration in clinics.

Regulation of micropatterned curvature-dependent FA heterogeneity on cytoskeleton tension and nuclear DNA synthesis of malignant breast cancer cells

Breast cancer is considered as a worldwide disease due to its high incidence and malignant metastasis. Although numerous techniques have been developed well to conduct breast cancer therapy, the influence of micropattern-induced interfacial heterogeneity on the molecular mechanism and nuclear signalling transduction of carcinogenesis is rarely announced. In this study, PDMS stencil-assisted micropatterns were fabricated on tissue culture plates to manage cell clustering colony by adjusting initial cell seeding density and the size of microholes. The curvature of each microholes was controlled to construct the interfacial heterogeneity of MDA-MB231 cancer cells at the periphery of micropatterned colony. The distinguished focal adhesion (FA) and cytoskeleton distribution at the central and peripheral regions of the cell colony were regulated by heterogeneous properties. The interfacial heterogeneity of FA and cytoskeleton would induce the biased tension force to encourage more ezrin expression at the periphery and further promote DNA synthesis, therefore disclosing a stem-like phenotype in heterogeneous cells. This study will provide a value source of information for the development of micropattern-induced heterogeneity and the interpretation of metastatic mechanism in malignant breast cancer cells.

Promotion of Melanoma Cell Proliferation by Cyclic Straining through Regulatory Morphogenesis

The genotype and phenotype of acral melanoma are obviously different from UV-radiation-induced melanoma. Based on the clinical data, mechanical stimulation is believed to be a potential cause of acral melanoma. In this case, it is desirable to clarify the role of mechanical stimulation in the progression of acral melanoma. However, the pathological process of cyclic straining that stimulates acral melanoma is still unclear. In this study, the influence of cyclic straining on melanoma cell proliferation was analyzed by using a specifically designed cell culture system. In the results, cyclic straining could promote melanoma cell proliferation but was inefficient after the disruption of cytoskeleton organization. Therefore, the mechanotransduction mechanism of promoted proliferation was explored. Both myosin and actin polymerization were demonstrated to be related to cyclic straining and further influenced the morphogenesis of melanoma cells. Additionally, the activation of mechanosensing transcription factor YAP was related to regulatory morphogenesis. Furthermore, expression levels of melanoma-involved genes were regulated by cyclic straining and, finally, accelerated DNA synthesis. The results of this study will provide supplementary information for the understanding of acral melanoma.

DNA modified MSN-films as versatile biointerfaces to study stem cell adhesion processes

A significant bottleneck in the clinical translation of stem cells remains eliciting the desired stem cell behavior once transplanted in the body. In their natural environment, stem cell fate is regulated by their interaction with extracellular matrix (ECM), mainly through integrin-mediated cell adhesion. 2D biointerfaces that selectively present ECM-derived ligands can be used as valuable tools to study and improve our understanding on how stem cells interact with their environment. Here we developed a new type of biointerface based on mesoporous silica nanoparticles (MSN) which are interesting nanomaterials for biointerface engineering because they allow close control over surface physiochemical properties. To create the platform, DNA functionalized MSN (MSN-ssDNA) with varying PEG linker length were developed. Cell adhesion tripeptide RGD was conjugated to a complementary DNA strand, which could specifically bind to MSN-ssDNA to create MSN-dsDNA-RGD films. We showed that MSN-dsDNA-RGD films could promote hMSCs adhesion and spreading, whereas MSN-dsDNA films without RGD resulted in poor cell spreading with round morphology, and low cell adhesion. In addition, we showed that cell adhesion to the films is PEG length-dependent. The design of the platform allows easy incorporation of other and multiple ECM ligands, as well as soluble cues, making MSN-ssDNA based biointerfaces a novel tool to study ligand-stem cell interactions.

Versatile-in-All-Trades: Multifunctional Boron-Doped Calcium-Deficient Hydroxyapatite Directs Immunomodulation and Regeneration

Osseointegration of implants depends on several intertwined factors: osteogenesis, angiogenesis, and immunomodulation. Lately, novel reinforcements allowing faster bonding with osseous tissue have been explored intensively. In this study, we hypothesized the use of boron as a major multifunctional ion to confer versatility to calcium-deficient hydroxyapatite (cHA) synthesized by a wet precipitation/microwave reflux method. By synthesis of boron-doped calcium-deficient hydroxyapatite (BcHA), we expected to obtain an osteoimmunomodulatory and regenerative nanoreinforcement. BcHA was found to possess a pure HA phase, a greater surface area (66.41 m²/g, p = 0.028), and cumulative concentrations of Ca (207.87 ± 6.90 mg/mL, p < 0.001) and B (112.70 ± 11.79 mg/mL, p < 0.001) released in comparison to cHA. Osteogenic potential of BcHA was analyzed using human fetal osteoblasts. BcHA resulted in a drastic increase in the ALP activity (1.11 ± 0.11 mmol/gDNA·min, p < 0.001), biomineralization rate, and osteogenic gene expressions compared to cHA. BcHA angiogenic potential was investigated using human umbilical cord vein endothelial cells. Significantly, the highest VEGF-A release (1111.14 ± 87.82 in 4 h, p = 0.009) and angiogenic gene expressions were obtained for BcHA-treated samples. These samples were also observed to induce a more prominent and highly branched tube network. Finally, inflammatory and inflammasome responses toward BcHA were elucidated using human monocyte-derived macrophages differentiated from THP-1s. BcHA exhibited lower CAS-1 release (50.18 ± 5.52 μg/g_DNA μg/gDNA) and higher IL-10 release (126.97 ± 15.05 μg/g_DNA) than cHA. In addition, BcHA treatment led to increased expression of regenerative genes such as VEGF-A, RANKL, and BMP-2. In vitro results demonstrated that BcHA has tremendous osteogenic, angiogenic, and immunomodulatory potential to be employed as a "versatile-in-all-trades" modality in various bone tissue engineering applications.

Stepwise Proliferation and Chondrogenic Differentiation of Mesenchymal Stem Cells in Collagen Sponges under Different Microenvironments

Biomimetic microenvironments are important for controlling stem cell functions. In this study, different microenvironmental conditions were investigated for the stepwise control of proliferation and chondrogenic differentiation of human bone-marrow-derived mesenchymal stem cells (hMSCs). The hMSCs were first cultured in collagen porous sponges and then embedded with or without collagen hydrogels for continual culture under different culture conditions. The different influences of collagen sponges, collagen hydrogels, and induction factors were investigated. The collagen sponges were beneficial for cell proliferation. The collagen sponges also promoted chondrogenic differentiation during culture in chondrogenic medium, which was superior to the effect of collagen sponges embedded with hydrogels without loading of induction factors. However, collagen sponges embedded with collagen hydrogels and loaded with induction factors had the same level of promotive effect on chondrogenic differentiation as collagen sponges during in vitro culture in chondrogenic medium and showed the highest promotive effect during in vivo subcutaneous implantation. The combination of collagen sponges with collagen hydrogels and induction factors could provide a platform for cell proliferation at an early stage and subsequent chondrogenic differentiation at a late stage. The results provide useful information for the chondrogenic differentiation of stem cells and cartilage tissue engineering.

Influence of Colonies’ Morphological Cues on Cellular Uptake Capacity of Nanoparticles

High transmembrane delivery efficiency of nanoparticles has attracted substantial interest for biomedical applications. It has been proved that the desired physicochemical properties of nanoparticles were efficient for obtaining a high cellular uptake capacity. On the other hand, biophysical stimuli from in situ microenvironment were also indicated as another essential factor in the regulation of cellular uptake capacity. Unfortunately, the influence of colony morphology on cellular uptake capacity was rarely analyzed. In this study, micropatterned PDMS stencils containing circular holes of 800/1,200 μm in diameter were applied to control colonies’ size. The amino-modified nanoparticles were cocultured with micropatterned colonies to analyze the influence of colonies’ morphology on the cellular uptake capacity of nanoparticles. Consequently, more endocytosed nanoparticles in larger colonies were related with a bigger dose of nanoparticles within a larger area. Additionally, the high cell density decreased the membrane–nanoparticles’ contacting probability but enhanced clathrin-mediated endocytosis. With these contrary effects, the cells with medium cell density or located in the peripheral region of the micropatterned colonies showed a higher cellular uptake capacity of nanoparticles.

Disrupted Surfaces of Porous Membranes Reduce Nuclear YAP Localization and Enhance Adipogenesis through Morphological Changes

The disrupted surface of porous membranes, commonly used in tissue-chip and cellular coculture systems, is known to weaken cell-substrate interactions. Here, we investigated whether disrupted surfaces of membranes with micron and submicron scale pores affect yes-associated protein (YAP) localization and differentiation of adipose-derived stem cells. We found that these substrates reduce YAP nuclear localization through decreased cell spreading, consistent with reduced cell-substrate interactions, and in turn enhance adipogenesis while decreasing osteogenesis.

Calcium response of spatially arranged cell networks to shear stress by confined single cell patterned microfluidic chips

Osteoblasts in multicellular organisms are sensitive to fluid shear stress (Fss) and respond smartly with versatile patterns of intracellular calcium signal ([Ca²⁺]_i). In this study, a spatial-single cell patterning method was developed by combining micro-contact printing (μCP) and reversible microfluidic chip mounted with vacuum together. Based on this well-defined patterning platform, it's possible to investigate calcium response to Fss modulated by spatial factors, and to characterize multiple calcium patterns quantitatively in terms of cell spacing and cell orientation. The result showed that the Fss-induced [Ca²⁺]_i profiles revealed oscillational signal patterns in non-connected cells such as those in physical-contacted cells. Close-arrayed osteoblasts showed remarkably more [Ca²⁺]_i oscillations than sparse-arrayed cells. The circular shape of the cells was sensitive to oscillational [Ca²⁺]_i as a potential major cause. The consistency of cell orientation and shear stress promoted temporal homogeneity of calcium oscillations.

The Role of Surface Chemistry in the Osseointegration of PEEK Implants

Poly(etheretherketone) (PEEK) implants suffer from poor osseointegration because of chronic inflammation. In this study, we hypothesized that adding NH₂ and COOH groups to the surface of PEEK could modulate macrophage responses by altering protein adsorption and improve its osseointegration. NH₂ and COOH-functionalized PEEK surfaces induced pro- and anti-inflammatory macrophage responses, respectively, and differences in protein adsorption patterns on these surfaces were related to the varied inflammatory responses. The macrophage responses to NH₂ surfaces significantly reduced the osteogenic differentiation of mesenchymal stem cells (MSCs). MSCs cultured on NH₂ surfaces differentiated less than those on COOH surfaces even though NH₂ surfaces promoted the most mineralization in simulated body fluid solutions. After 14 days in rat tibia unicortical defects, the bone around NH₂ surfaces had thinner trabeculae and higher specific bone surface than the bone around unmodified implants; surprisingly, the NH₂ implants significantly increased bone-binding over the unmodified implants, while COOH implants only showed a trend for increasing bone-binding. Taken together, these results suggest that both mineral-binding and immune responses play a role in osseointegration, and PEEK implant integration may be improved with mixtures of these two functional groups to harness the ability to reduce inflammation and bind bone strongly.

Design-Build-Validate Strategy to 3D Print Bioglass Gradients for Anterior Cruciate Ligament Enthesis Reconstruction

A rupture of the anterior cruciate ligament (ACL) is one of the most common knee ligament injuries affecting the young and active population. Tissue engineering strategies to reconstruct the damaged ACL have met with significant challenges mainly associated with poor graft integration at the bone-ligament interface (i.e., enthesis). In this study, a "design-build-validate" strategy was employed by combining 3D Raman spectral mapping and 3D printing to develop a tissue engineered scaffold that is compositionally similar to the ACL bone-ligament interface and can provide the essential biochemical cues to promote interface regeneration and facilitate functional graft to bone integration. Results showed that Raman spectroscopy is a highly efficient nondestructive technique to determine the biochemical composition of native ACL enthesis. 3D printing using combinatory inks consisting of different compositions of methacrylated collagen (CMA) and Bioglass (BG) allowed for the fabrication of BG gradient-incorporated collagen matrices (BioGIMs) with a transition region confirmed by Alizarin red S staining. Furthermore, Raman spectroscopy validated replication of ACL enthesis composition in BioGIMs. In addition, human mesenchymal stem cells (hMSCs) cultured on BioGIMs showed morphological differences along the length of the BioGIMs as evidenced by confocal microscopy of cell cytoskeleton-stained images indicating that the cells can sense the underlying differences in matrix composition. Overall, the "design-build-validate" strategy developed in this study has significant potential to generate biomimetic tissue constructs for use at the interface regions of synthetic grafts to promote better host integration and achieve full reconstruction of the ACL. Impact statement Poor graft integration at the bone-ligament interface (i.e., enthesis) is a significant clinical problem in anterior cruciate ligament (ACL) repair and reconstruction. In this study, Raman spectroscopy and 3D printing technologies were used in combination for the first time in a design-build-validate strategy to develop a continuous biomimetic Bioglass gradient-incorporated collagen matrix (BioGIM) that compositionally emulates the native ACL enthesis. These BioGIMs can be fused onto the ends of synthetic ACL grafts and have significant potential to provide the essential biochemical cues to guide tissue-specific cell differentiation, augment functional matrix reorganization, promote better graft integration, and achieve full reconstruction of damaged ACL.

Bioprinting of Stem Cells in Multimaterial Scaffolds and Their Applications in Bone Tissue Engineering

Bioprinting stem cells into three-dimensional (3D) scaffolds has emerged as a new avenue for regenerative medicine, bone tissue engineering, and biosensor manufacturing in recent years. Mesenchymal stem cells, such as adipose-derived and bone-marrow-derived stem cells, are capable of multipotent differentiation in a 3D culture. The use of different printing methods results in varying effects on the bioprinted stem cells with the appearance of no general adverse effects. Specifically, extrusion, inkjet, and laser-assisted bioprinting are three methods that impact stem cell viability, proliferation, and differentiation potential. Each printing method confers advantages and disadvantages that directly influence cellular behavior. Additionally, the acquisition of 3D bioprinters has become more prominent with innovative technology and affordability. With accessible technology, custom 3D bioprinters with capabilities to print high-performance bioinks are used for biosensor fabrication. Such 3D printed biosensors are used to control conductivity and electrical transmission in physiological environments. Once printed, the scaffolds containing the aforementioned stem cells have a significant impact on cellular behavior and differentiation. Natural polymer hydrogels and natural composites can impact osteogenic differentiation with some inducing chondrogenesis. Further studies have shown enhanced osteogenesis using cell-laden scaffolds in vivo. Furthermore, selective use of biomaterials can directly influence cell fate and the quantity of osteogenesis. This review evaluates the impact of extrusion, inkjet, and laser-assisted bioprinting on adipose-derived and bone-marrow-derived stem cells along with the effect of incorporating these stem cells into natural and composite biomaterials.

Phactr1 negatively regulates bone mass by inhibiting osteogenesis and promoting adipogenesis of BMSCs via RhoA/ROCK2

The imbalance between osteogenic and adipogenic differentiation of Bone marrow-derived mesenchymal stem cells (BMSCs) is involved in the occurrence and development of osteoporosis (OP). Previous studies have indicated the potential of phosphatase and actin regulator 1 (Phactr1) in regulating osteogenic and adipogenic differentiation of BMSCs. The present study aims to investigate the function and mechanism of Phactr1 in regulating osteogenic and adipogenic differentiation of BMSCs. Herein, the expression of Phactr1 in bone and adipose tissue of OP rats was determined by immunohistochemical. BMSCs were subjected to osteogenic and adipogenic differentiation, and transfected with Phactr1 overexpression lentivirus, small interference RNA (siRNA) and KD025 (selective ROCK2 inhibitor). The relationship between Phactr1 and ROCK2 was detected by Co-IP experiment. The expression of Phactr1, Runx2, C/EBPα, RhoA and ROCK2 was detected by Western blot. Calcium nodule and lipid droplets were determined by alizarin red and Oil red O staining. Interestingly, Phactr1 increased in both bone and adipose tissue of OP rats. During osteogenic differentiation, Phactr1 decreased and active RhoA, ROCK2 increased, while overexpression Phactr1 inhibits the increase of Runx2. Phactr1 increased and active RhoA decreased, ROCK2 did not changed during adipogenic differentiation. While, Knockdown Phactr1 inhibits the increase of C/EBPα. Phactr1 and ROCK2 were combined in osteogenic differentiation, but not in adipogenic differentiation. By using KD025, the decrease of Phactr1 and increase of Runx2 were inhibited respectively in osteogenic differentiation. Meanwhile, when ROCK2 was inhibited, Phactr1, C/EBPα were significantly increased in adipogenic differentiation. These findings indicated that Phactr1 negatively regulates bone mass by inhibiting osteogenesis and promoting adipogenesis of BMSCs by activating RhoA/ROCK2.

The varied influences of cell adhesion and spreading on gene transfection of mesenchymal stem cells on a micropatterned substrate

Transmembrane transport of exogenous genes is widely investigated because of high demand for gene therapy. Both gene carriers and cellular conditions can affect gene transfection efficiency. Although cell morphology has been reported to affect cell functions, the influence of cell adhesion area and cell spreading area on the transfection of exogenous genes remains unclear because it is difficult to separate the individual influence of these areas during normal cell culture. In this study, micropatterns were prepared to separately control the adhesion and spreading areas of human bone marrow-derived mesenchymal stem cells (hMSCs). Transfection efficiency of the green fluorescent protein gene to hMSCs cultured on the micropatterns was compared. Cells with a larger adhesion area showed higher transfection efficiency, while cell spreading area hardly affected gene transfection efficiency. Cell adhesion area had dominant influence on gene transfection. Microparticle uptake and BrdU staining showed that the cellular uptake capacity and DNA synthesis activity increased with the increase in cell adhesion area, but were not affected by cell spreading area. The different influence of cell adhesion area and cell spreading area on gene transfection was correlated with their influence on cellular uptake capacity, DNA synthesis activity, focal adhesion formation, cytoskeletal mechanics, and mechanotransduction signal activation. The results suggest that cell adhesion area and cell spreading area had different influence on gene transfection; this finding should provide useful information for the manipulation of cell functions in gene therapy, protein modification, and cell reprogramming. STATEMENT OF SIGNIFICANCE: Cell adhesion and spreading are important morphological factors during the interaction of cells with biomaterial surfaces or interfaces. However, the predominant morphological factor that affects cellular functions such as gene transfection remains unclear. In the present study, special micropatterns were used to precisely control cell adhesion and spreading areas independently. Mesenchymal stem cells cultured on the micropatterns were transfected with the green fluorescent protein gene to compare the different influence of cell adhesion and spreading areas on gene transfection efficiency. Cell adhesion area showed dominant influence on gene transfection, while cell spreading area did not affect gene transfection. The dominant influence of cell adhesion area could be explained by cellular uptake capacity and DNA synthesis activity through the formation of FAs, cytoskeletal mechanics, and YAP/TAZ nuclear localization. The results provide new insights of correlation between cell morphology and cellular functions for designing functional biomaterials.

Growth factors regional patterned and photoimmobilized scaffold applied to bone tissue regeneration

Bone diseases such as osteomalacia, osteoporosis, and osteomyelitis are major illnesses that threaten the health of human. This study aimed to provide an idea at the molecular level of material properties determined with UV specific surface approaches. The tert-butyl hydroperoxide (t-BHP) exposure aging model bone mesenchymal stem cells (BMSCs) were reverted by using a poly-hybrid scaffold (PS), which is a carbon nanotube (CNT) coated polycaprolactone (PCL) and polylactic acid (PLA) scaffold, combined with insulin-like growth factor-1 (IGF). Then, the region-specific PS photo-immobilized with different growth factors (GFs) was obtained by interference and diffraction of ultraviolet (UV) light. Additionally, the reverted BMSCs were regionally pattern differentiated into three kinds of cells on the GF immobilized PS (GFs/PS). In vivo, the GFs/PS accelerate bone healing in injured Sprague-Dawley (SD) rats. The data showed that GFs/PS effectively promoted the differentiation of reverted BMSCs in the designated area on 21st day. These results suggest region-specific interface immobilization of GFs concurrently differentiating reverted BMSCs into three different cells in the same scaffold. This method might be considered as a short-time, low cost, and simple operational approach to scaffold modification for tissue regeneration in the future.

Micropattern-controlled chirality of focal adhesions regulates the cytoskeletal arrangement and gene transfection of mesenchymal stem cells

Cell chirality has been demonstrated to be important for controlling cell functions. However, it is not clear how the chirality of the extracellular microenvironment regulates cell adhesion and cytoskeletal structures and therefore affects gene transfection. In this study, the chirality of focal adhesions and the cytoskeleton of single human mesenchymal stem cells (hMSCs) was controlled by specially designed micropatterns, and its influence on gene transfection was investigated. Micropatterns with different cell adhesion areas and swirling stripe lines were prepared by micropatterning fibronectin on polystyrene surfaces. The chiral micropatterns induced the formation of chiral focal adhesions and chiral cytoskeletal structures. Gene transfection efficiency was enhanced with increasing adhesion area, while hMSCs on left-handed and right-handed swirling micropatterns showed the same level of gene transfection. When the swirling angle was changed from 0°, 30°, and 60° to 90°, the gene transfection efficiency at a swirling angle of 60° was the lowest. The influence of cell chirality on gene transfection was strongly associated with cellular uptake capacity, DNA synthesis and cytoskeletal mechanics. The results demonstrated that cytoskeletal swirling had a significant influence on gene transfection.

Comparative Analysis of Mesenchymal Stem Cell Cultivation in Fetal Calf Serum, Human Serum, and Platelet Lysate in 2D and 3D Systems

In vitro two-dimensional (2D) and three-dimensional (3D) cultivation of mammalian cells requires supplementation with serum. Mesenchymal stem cells (MSCs) are widely used in clinical trials for bioregenerative medicine and in most cases, in vitro expansion and differentiation of these cells are required before application. Optimized expansion and differentiation protocols play a key role in the treatment outcome. 3D cell cultivation systems are more comparable to in vivo conditions and can provide both, more physiological MSC expansion and a better understanding of intercellular and cell-matrix interactions. Xeno-free cultivation conditions minimize risks of immune response after implantation. Human platelet lysate (hPL) appears to be a valuable alternative to widely used fetal calf serum (FCS) since no ethical issues are associated with its harvest, it contains a high concentration of growth factors and cytokines and it can be produced from expired platelet concentrate. In this study, we analyzed and compared proliferation, as well as osteogenic and chondrogenic differentiation of human adipose tissue-derived MSCs (hAD-MSC) using three different supplements: FCS, human serum (HS), and hPL in 2D. Furthermore, online monitoring of osteogenic differentiation under the influence of different supplements was performed in 2D. hPL-cultivated MSCs exhibited a higher proliferation and differentiation rate compared to HS- or FCS-cultivated cells. We demonstrated a fast and successful chondrogenic differentiation in the 2D system with the addition of hPL. Additionally, FCS, HS, and hPL were used to formulate Gelatin-methacryloyl (GelMA) hydrogels in order to evaluate the influence of the different supplements on the cell spreading and proliferation of cells growing in 3D culture. In addition, the hydrogel constructs were cultivated in media supplemented with three different supplements. In comparison to FCS and HS, the addition of hPL to GelMA hydrogels during the encapsulation of hAD-MSCs resulted in enhanced cell spreading and proliferation. This effect was promoted even further by cultivating the hydrogel constructs in hPL-supplemented media.

Regulation of gene transfection by cell size, shape and elongation on micropatterned surfaces

Gene transfection has been widely studied due to its potential applications in tissue repair and gene therapy. Many studies have focused on designing gene carriers and developing novel transfection techniques. However, the influence of cell size, shape and elongation on gene transfection has rarely been investigated. In this study, poly(vinyl alcohol)-micropatterned surfaces were prepared to precisely manipulate the size, shape and elongation of mesenchymal stem cells, and the influences of these factors on gene transfection were investigated. Cell size showed a significant influence on gene transfection. Elongation could affect the gene transfection of large cells but not small cells. Cells with a large spreading area and high aspect ratio showed high transfection with exogenous plasmid DNA. In particular, the transfection efficiency was the highest in micropatterned cells with a spreading area of 5024 μm2 and an aspect ratio of 8 : 1. In contrast, cell shape had no significant influence on gene transfection. The different influences of cell size, shape and elongation were correlated with their respective impacts on cytoskeletal structures, cellular nanoparticle uptake and DNA synthesis. Cells with a large size and elongated morphology showed well-organized actin filaments with a high cellular modulus, therefore promoting cellular nanoparticle uptake and DNA synthesis. Cells with different shapes showed similarities in actin filament organization, cellular modulus, uptake capacity and DNA synthesis. The results suggest the importance of cell size and elongation in exogenous gene transfection and should provide useful information for gene transfection and gene therapy.

Interplay of Hydrogel Composition and Geometry on Human Mesenchymal Stem Cell Osteogenesis

Microgels are emerging as an outstanding platform for tissue regeneration because they overcome issues associated with conventional bulk/macroscopic hydrogels such as limited cell-cell contact and cell communication and low diffusion rates. Owing to the enhanced mass transfer and injectability via a minimally invasive procedure, these microgels are becoming a promising approach for bone regeneration applications. Nevertheless, there still remains a huge gap between the understanding of how the hydrogel matrix composition can influence cell response and overall tissue formation when switching from bulk formats to microgel format, which is often neglected or rarely studied. Here, we fabricated polyethylene glycol-based microgels and bulk hydrogels incorporating gelatin and hyaluronic acid (HA), either individually or together, and assessed the impact of both hydrogel composition and format upon the osteogenic differentiation of encapsulated human bone marrow-derived mesenchymal stem cells (hBMSCs). Osteogenesis was significantly greater in microgels than bulk hydrogels for both gelatin alone (Gel) and gelatin HA composite (Gel:HA) hydrogels, as determined by the expression of Runt-related transcription factor (Runx2) and alkaline phosphatase (ALP) genes and mineral deposition. Interestingly, Gel and Gel:HA hydrogels behaved differently between bulk and microgel format. In bulk format, overall osteogenic outcomes were better in Gel:HA hydrogels, but in microgel format, while the level of osteogenic gene expression was equivalent between both compositions, the degree of mineralization was reduced in Gel:HA microgels. Investigation into the affinity of hydroxyapatite for the different matrix compositions indicated that the decreased mineralization of Gel:HA microgels was likely due to a low affinity of hydroxyapatite to bind to HA and support mineral deposition, which has a greater impact on microgels than bulk hydrogels. Together, these findings suggest that both hydrogel composition and format can determine the success of tissue formation and that there is a complex interplay of these two factors on both cell behavior and matrix deposition. This has important implications for tissue engineering, showing that hydrogel composition and geometry must be evaluated together when optimizing conditions for cell differentiation and tissue formation.

Paramagnetic Functionalization of Biocompatible Scaffolds for Biomedical Applications: A Perspective

The burst of research papers focused on the tissue engineering and regeneration recorded in the last years is justified by the increased skills in the synthesis of nanostructures able to confer peculiar biological and mechanical features to the matrix where they are dispersed. Inorganic, organic and hybrid nanostructures are proposed in the literature depending on the characteristic that has to be tuned and on the effect that has to be induced. In the field of the inorganic nanoparticles used for decorating the bio-scaffolds, the most recent contributions about the paramagnetic and superparamagnetic nanoparticles use was evaluated in the present contribution. The intrinsic properties of the paramagnetic nanoparticles, the possibility to be triggered by the simple application of an external magnetic field, their biocompatibility and the easiness of the synthetic procedures for obtaining them proposed these nanostructures as ideal candidates for positively enhancing the tissue regeneration. Herein, we divided the discussion into two macro-topics: the use of magnetic nanoparticles in scaffolds used for hard tissue engineering for soft tissue regeneration.

In vivo bone regeneration assessment of offset and gradient melt electrowritten (MEW) PCL scaffolds

BACKGROUND

Biomaterial-based bone tissue engineering represents a promising solution to overcome reduced residual bone volume. It has been previously demonstrated that gradient and offset architectures of three-dimensional melt electrowritten poly-caprolactone (PCL) scaffolds could successfully direct osteoblast cells differentiation toward an osteogenic lineage, resulting in mineralization. The aim of this study was therefore to evaluate the in vivo osteoconductive capacity of PCL scaffolds with these different architectures.

METHODS

Five different calcium phosphate (CaP) coated melt electrowritten PCL pore sized scaffolds: 250 μm and 500 μm, 500 μm with 50% fibre offset (offset.50.50), tri layer gradient 250-500-750 μm (grad.250top) and 750-500-250 μm (grad.750top) were implanted into rodent critical-sized calvarial defects. Empty defects were used as a control. After 4 and 8 weeks of healing, the new bone was assessed by micro-computed tomography and immunohistochemistry.

RESULTS

Significantly more newly formed bone was shown in the grad.250top scaffold 8 weeks post-implantation. Histological investigation also showed that soft tissue was replaced with newly formed bone and fully covered the grad.250top scaffold. While, the bone healing did not happen completely in the 250 μm, offset.50.50 scaffolds and blank calvaria defects following 8 weeks of implantation. Immunohistochemical analysis showed the expression of osteogenic markers was present in all scaffold groups at both time points. The mineralization marker Osteocalcin was detected with the highest intensity in the grad.250top and 500 μm scaffolds. Moreover, the expression of the endothelial markers showed that robust angiogenesis was involved in the repair process.

CONCLUSIONS

These results suggest that the gradient pore size structure provides superior conditions for bone regeneration.

A Developmental Engineering-Based Approach to Bone Repair: Endochondral Priming Enhances Vascularization and New Bone Formation in a Critical Size Defect

There is a distinct clinical need for new therapies that provide an effective treatment for large bone defect repair. Herein we describe a developmental approach, whereby constructs are primed to mimic certain aspects of bone formation that occur during embryogenesis. Specifically, we directly compared the bone healing potential of unprimed, intramembranous, and endochondral primed MSC-laden polycaprolactone (PCL) scaffolds. To generate intramembranous constructs, MSC-seeded PCL scaffolds were exposed to osteogenic growth factors, while endochondral constructs were exposed to chondrogenic growth factors to generate a cartilage template. Eight weeks after implantation into a cranial critical sized defect in mice, there were significantly more vessels present throughout defects treated with endochondral constructs compared to intramembranous constructs. Furthermore, 33 and 50% of the animals treated with the intramembranous and endochondral constructs respectively, had full bone union along the sagittal suture line, with significantly higher levels of bone healing than the unprimed group. Having demonstrated the potential of endochondral priming but recognizing that only 50% of animals completely healed after 8 weeks, we next sought to examine if we could further accelerate the bone healing capacity of the constructs by pre-vascularizing them in vitro prior to implantation. The addition of endothelial cells alone significantly reduced the healing capacity of the constructs. The addition of a co-culture of endothelial cells and MSCs had no benefit to either the vascularization or mineralization potential of the scaffolds. Together, these results demonstrate that endochondral priming alone is enough to induce vascularization and subsequent mineralization in a critical-size defect.

Combination Design of Time-Dependent Magnetic Field and Magnetic Nanocomposites to Guide Cell Behavior

The concept of magnetic guidance is still challenging and has opened a wide range of perspectives in the field of tissue engineering. In this context, magnetic nanocomposites consisting of a poly(ε-caprolactone) (PCL) matrix and iron oxide (Fe₃O₄) nanoparticles were designed and manufactured for bone tissue engineering. The mechanical properties of PCL/Fe₃O₄ (80/20 w/w) nanocomposites were first assessed through small punch tests. The inclusion of Fe₃O₄ nanoparticles improved the punching properties as the values of peak load were higher than those obtained for the neat PCL without significantly affecting the work to failure. The effect of a time-dependent magnetic field on the adhesion, proliferation, and differentiation of human mesenchymal stem cells (hMSCs) was analyzed. The Alamar Blue assay, confocal laser scanning microscopy, and image analysis (i.e., shape factor) provided information on cell adhesion and viability over time, whereas the normalized alkaline phosphatase activity (ALP/DNA) demonstrated that the combination of a time-dependent field with magnetic nanocomposites (PCL/Fe₃O₄ Mag) influenced cell differentiation. Furthermore, in terms of extracellular signal-regulated kinase (ERK)1/2 phosphorylation, an insight into the role of the magnetic stimulation was reported, also demonstrating a strong effect due the combination of the magnetic field with PCL/Fe₃O₄ nanocomposites (PCL/Fe₃O₄ Mag).

Dimensionality changes actin network through lamin A/C and zyxin

Mechanosensing proteins have mainly been investigated in 2D culture platforms, while understanding their regulation in 3D enviroments is critical for tissue engineering. Among mechanosensing proteins, the actin cytoskeleton plays a key role in human mesenchymal stromal cells (hMSCs) activity, but its regulation in 3D tissue engineered scaffolds remains poorly studied. Here, we show that human mesenchymal stromal cells (hMSCs) cultured on 3D electrospun scaffolds made of a stiff material do not form actin stress fibers, contrary to hMSCs on 2D films of the same material. On 3D electrospun and additive manufactured scaffolds, hMSCs also displayed fewer focal adhesions, lower lamin A and C expression and less YAP1 nuclear localization and myosin light chain phosphorylation. Together, this strongly suggests that dimensionality prevents the build-up of cellular tension, even on stiff materials. Knock down of either lamin A and C or zyxin resulted in fewer stress fibers in the cell center. Zyxin knock down reduced lamin A and C expression, but not vice versa, showing that this signal chain starts from the outside of the cell. Lineage commitment was not affected by the lack of these important osteogenic proteins in 3D, as all cells committed to osteogenesis in bi-potential medium. Our study demonstrates that dimensionality changes the actin cytoskeleton through lamin A and C and zyxin, and highlights the difference in the regulation of lineage commitment in 3D enviroments. Together, these results can have important implications for future scaffold design for both stiff- and soft tissue engineering constructs.

Regulation of Stem Cell Functions by Micro-Patterned Structures

Micro-patterned surfaces have been broadly used to control the morphology of stem cells for investigation of the influence of physiochemical and biological cues on stem cell functions. Different structures of micro-patterned surfaces can be prepared by photolithography through designing the photomask features. Cell spreading area, geometry, aspect ratio, and alignment can be regulated by the micro-patterned structures. Their influences on adipogenic, osteogenic, and smooth muscle differentiation of the human bone marrow-derived mesenchymal stem cells are compared and investigated in details. Variation of cell morphology can trigger rearrangement of cytoskeleton, generating cytoskeletal mechanical stimulation and consequently inducing differentiation of mesenchymal stem cells into different lineages. This chapter summarizes the latest development of regulation of mesenchymal stem cell morphology by micro-patterns and the influence on the behaviors and differentiation of the mesenchymal stem cells.