Water properties under nano-scale confinement

Ubiquity of the Micrometer-Thick Interface along a Quartz-Water Boundary

Water-rock interactions determine how the geochemical cycles revolve from the Earth's surface to the deep interior (large T-P intervals). The underlying mechanisms interweave the fluxes of matter, time, and reactivity between fluid phases and solids. The deformation processes of crustal rocks are also known to be significantly affected by the presence or absence of water, typically with the hydrolytic weakening of quartz, olivine, and other silicate minerals. In fact, fluid-rock interactions mechanistically unfold along their interfaces, developing over a certain thickness within the two phases. Diffraction-limited mid-infrared microspectroscopy was employed to monitor the thermodynamic characteristics of liquid water along a quartz boundary. The hyperspectral Fourier transform infrared data set displayed a very strong distance-dependent signature for water over a 1 ± 0.5 μm thickness, while quartz appears unmodified, which is consistent with recent studies. This unexpected thick interface is tested against the geometry of the inclusion, the chemistry of the occluded liquid (especially pH), and the thermal conditions ranging from room temperature to 155 °C. Throughout this range of physicochemical conditions, the micrometer-thick interface is characterized by a ubiquitous, significant shift in the Gibbs free energy of water inside the interfacial layer. This conclusion suggests that the interface-imprinting phenomenon driving this microthick layer has thermodynamic roots that give rise to specific properties along the quartz-water interface. This finding questions the systematic use of the bulk phase data sets to evaluate how water-rock interactions progress in porous media.

Strength, number, and kinetics of hydrogen bonds for water confined inside boron nitride nanotubes

Water has shown a myriad of highly interesting properties and behaviors, such as very low friction, phase transition under unexpected conditions, massive property alterations, etc. inside strong nanoconfinements of few-nanometer to sub-nanometer diameters. Water-water hydrogen bonding is one of the most important factors dictating such water behavior and properties inside such strong nanoconfinements. In this paper, we employ Reactive Force Field (ReaxFF) molecular dynamics (MD) simulations for studying multiple facets of such water-water hydrogen bonds (HBs) inside boron-nitride nanotubes (BNNTs) having diameters ranging from a few nanometers to sub-nanometers. First, the strength of the water-water HB interactions, as a function of the HB configuration, is quantified by studying the corresponding PMF (potential of mean force). For water present in extreme confinements (BNNTs with sub-nanometric diameters), we see completely isolated HB basins. On the other hand, for bulk water the HB basin is connected (via a saddle point) to a nearby second PMF well. Therefore, our analysis successfully distinguishes the HB characteristics between the cases of water in extreme confinement and bulk water. Second, we study the kinetics of such water-water HBs: HBs formed by a given pair of water molecules in extreme confinements show a much larger probability of remaining intact once formed or re-forming after they have been broken. Both these results, which shed new light on water-water hydrogen bonding inside strong nanoconfinements, can be explained by the single-file structure formed by the water molecules in extreme BNNT confinements.

Deprotonation of formic, acetic acids and bicarbonate ion in slit silica nanopores at infinite dilution and in the presence of electrolytes

Dielectric effects and the coupled electrostatics between the nanoconfined and the internal/external aqueous media contribute to the observed deviations of chemistry within the nanoconfined environment when compared with unconfined systems. A systematic understanding has remained elusive, especially with respect to background salt concentration and boundary condition effects like the nanopore surface chemistry and the reference state used to calculate free energies. We utilize molecular dynamics simulations along with thermodynamic integration to determine the free energy difference associated with acid-base chemistry in 2 nm and 4 nm slit pores open to a bulk-like reservoir. pKa increases are predicted when confining acetic acid, formic acid, and bicarbonate in the slits at infinite dilution conditions. We find that confinement weakens the acids, and the modulation of outer pore surface dipole magnitudes can tune the pKa shift values, suggesting that purely "intrinsic" electrostatic effect on confinement may not exist. At sufficiently high salt concentrations, the dielectric/electrostatic effects on pKa values diminish due to charge screening effects. These discoveries enable future modifications of nanopore chemistries to achieve desirable properties for industrial applications.

Mild-Temperature Supercritical Water Confined in Hydrophobic Metal-Organic Frameworks

Fluids under extreme confinement show characteristics significantly different from those of their bulk counterpart. This work focuses on water confined within the complex cavities of highly hydrophobic metal-organic frameworks (MOFs) at high pressures. A combination of high-pressure intrusion-extrusion experiments with molecular dynamic simulations and synchrotron data reveals that supercritical transition for MOF-confined water takes place at a much lower temperature than in bulk water, ∼250 K below the reference values. This large shifting of the critical temperature (Tc) is attributed to the very large density of confined water vapor in the peculiar geometry and chemistry of the cavities of Cu2tebpz (tebpz = 3,3',5,5'-tetraethyl-4,4'-bipyrazolate) hydrophobic MOF. This is the first time the shift of Tc is investigated for water confined within highly hydrophobic nanoporous materials, which explains why such a large reduction of the critical temperature was never reported before, neither experimentally nor computationally.

Confinement-induced clustering of H2 and CO2 gas molecules in hydrated nanopores

Gas molecule clustering within nanopores holds significance in the fields of nanofluidics, biology, gas adsorption/desorption, and geological gas storage. However, the intricate roles of nanoconfinement and surface chemistry that govern the formation of gas clusters remain inadequately explored. In this study, through free energy calculation in molecular simulations, we systematically compared the tendencies of H2 and CO2 molecules to aggregate within hydrated hydrophobic pyrophyllite and hydrophilic gibbsite nanopores. The results indicate that nanoconfinement enhances gas dimer formation in the nanopores, irrespective of surface chemistry. However, surface hydrophilicity prohibits the formation of gas clusters larger than dimers, while large gas clusters form easily in hydrophobic nanopores. Despite H2 and CO2 both being non-polar, the larger quadrupole moment of CO2 leads to a stronger preference for dimer/cluster formation compared to H2. Our results also indicate that gases prefer to enter the nanopores as individual molecules, but exit the nanopores as dimers/clusters. This investigation provides a mechanistic understanding of gas cluster formation within nanopores, which is relevant to various applications, including geological gas storage.

Design Principles Guiding Solvent Size Selection in ZIF-Based Type 3 Porous Liquids for Permanent Porosity

Porous liquids (PLs), which are solvent-based systems that contain permanent porosity due to the incorporation of a solid porous host, are of significant interest for the capture of greenhouse gases, including CO2. Type 3 PLs formed by using metal-organic frameworks (MOFs) as the nanoporous host provide a high degree of chemical turnability for gas capture. However, pore aperture fluctuation, such as gate-opening in zeolitic imidazole framework (ZIF) MOFs, complicates the ability to keep the MOF pores available for gas adsorption. Therefore, an understanding of the solvent molecular size required to ensure exclusion from MOFs in ZIF-based Type 3 PLs is needed. Through a combined computational and experimental approach, the solvent-pore accessibility of exemplar MOF ZIF-8 was examined. Density functional theory (DFT) calculations identified that the lowest-energy solvent-ZIF interaction occurred at the pore aperture. Experimental density measurements of ZIF-8 dispersed in various-sized solvents showed that ZIF-8 adsorbed solvent molecules up to 2 Å larger than the crystallographic pore aperture. Density analysis of ZIF dispersions was further applied to a series of possible ZIF-based PLs, including ZIF-67, -69, -71(RHO), and -71(SOD), to examine the structure-property relationships governing solvent exclusion, which identified eight new ZIF-based Type 3 PL compositions. Solvent exclusion was driven by pore aperture expansion across all ZIFs, and the degree of expansion, as well as water exclusion, was influenced by ligand functionalization. Using these results, a design principle was formulated to guide the formation of future ZIF-based Type 3 PLs that ensures solvent-free pores and availability for gas adsorption.

JUJUNCAO-Stem-Based Interfacial Solar-Driven Evaporator with Natural Two-Phase Composite Structures of Functional Partition and Inherent Ultralow Vaporization Enthalpy of Water for Stable and Efficient Steam Production

The interfacial solar-driven evaporation has been deemed as an environmentally friendly approach for freshwater generation. Nevertheless, there is still a challenge to obtain solar evaporators with efficient vapor production from low-cost and renewable biomass through a simple preparation process. Herein, the JUJUNCAO stem was selected as the substrate material, and a kind of interfacial solar-driven evaporator with natural two-phase composite structures and inherent ultralow water vaporization enthalpy was constructed by a dip-coating process. The natural two-phase composite structures were utilized as independent functional partition: the low-tortuosity and hydrophilic vascular bundles served as hierarchical channels for rapid water transportation and continuous steam escape, and the honeycomb-like parenchyma cells were considered natural heat insulators for effective thermal management. Furthermore, the JUJUNCAO stem exhibited inherent ultralow water vaporization enthalpy which was only 1.15 kJ g-1. Benefiting from the natural two-phase composite structures of functional partition and inherent ultralow water vaporization enthalpy, the C-Js evaporator could achieve an evaporation rate of 2.77 kg m-2 h-1 with an efficiency of 85.6% under 1 sun illumination. Meanwhile, the C-Js exhibited a stable and ideal evaporation performance and metal ion rejection behavior in the actual brine desalination process. Owing to the cost-effective and simple pretreatment process, the C-Js evaporator has the potential for freshwater generation in undeveloped areas.

Thermochemical Properties of Synthesized Urea from Recovered Ammonia and Carbon Dioxide in Well-Ordered Nanospaces of Hollow Silica Spheres

The present work investigated the thermochemical properties of urea synthesized in well-ordered nanospaces of porous hollow silica spheres' shells from recovered ammonia and carbon dioxide in aqueous solution. Thermochemical behaviors of the urea synthesized in well-ordered nanospaces of the hollow spheres' shells prepared with 1-dodeclyamine were analyzed from the results of thermogravimetric analysis (TGA) and differential thermal analysis (DTA), and endothermic peaks assigned as the phase transition and decomposition were observed at ca. 440 and 514 K, respectively, which were higher than those of pristine urea (405 and 408 K, respectively), probably because of the nanoconfinement effect. The decomposition behavior was also confirmed by the result of diffuse reflectance infrared Fourier transform (DRIFT) spectra of the samples treated at various temperatures up to 573 K, and the decomposition of urea synthesized in the well-ordered nanospaces of the hollow spheres' shells started at 468 K and completed up to 533 K.

A Self-Adaptive and Regenerable Hydrogel Interfacial Evaporator with Adjustable Evaporation Area for Solar Water Purification

Solar-driven interfacial evaporation is a potential water purification solution. Here, a novel regenerable hydrogel interfacial evaporator is designed with tunable water production. Such an evaporator is fabricated by readily mixing hydroxypropyl chitosan (HPCS) and dibenzaldehyde-functional poly(ethylene glycol) (DF-PEG) at ambient conditions. Dynamic Schiff base bonds bestow on the HPCS/DF-PEG hydrogel (HDH) evaporator self-adaptivity and pH responsiveness. The as-prepared HDH is enabled to spontaneously change shape to adapt to different molds, endowing the evaporator with adjustable evaporation area. The water production performance of the intelligent evaporator is first evaluated using tunable evaporation index (TEI, the tunable evaporated water mass per hour), which can be altered from 0 kg h-1 to 3.21 kg h-1 under one sun. Besides, the large-scale evaporator can be expediently fabricated by virtue of the self-adaptivity. Benefiting from the pH responsiveness, the HDH evaporator is successfully regenerated with the removal of organic dye by the liquefaction-dialysis-regeneration operations. Meanwhile, the re-created evaporator maintains the self-adaptive characteristic and almost constant water evaporation rate compared to that of the initial evaporator. Therefore, this distinctive concept provides a facile strategy to develop smart and recyclable solar-driven interfacial evaporators for flexible water purification.

Active Solid-State Nanopores: Self-Driven Flows/Chaos at the Liquid-Gas Nanofluidic Interface

Here, we present a comprehensive study of self-driven flow dynamics at the liquid-gas interface within nanofluidic pores in the absence of external driving forces. The investigation focuses on the Rayleigh-Taylor instability phenomena that occur in sub-100 nm scale fluidic pores interfacing between 2 μm scale water and air reservoir. We obtain a flow velocity equation, and we validate it using simulations, concentrating on the mass transfer efficiency of these flow structures. Furthermore, we introduce the concept─"active solid-state nanopore"─that exhibits a self-driven flow switching behavior, transitioning between active and passive states without the need for mechanical components. We found a unique state of chaos at the nanoscale resembling the chaotic motion of fluid. This study contributes to the preliminary understanding of fluid dynamics at the classical-quantum interface. Implications of self-driven nanofluidics extend across diverse fields from biosensing and healthcare applications to advancing net-zero sustainable energy production and contributing to the fundamental understanding of fluid dynamics in confined spaces.

Characterization of Water Structure and Phase Behavior within Metal-Organic Nanotubes

Water behavior under nanoconfinement varies significantly from that in the bulk but also depends on the nature of the pore walls. Hybrid compound offers the ideal system to explore water behavior in complex materials, so a model metal-organic nanotube (UMONT) material was utilized to explore the behavior of water between 100 and 293 K. Single-crystal X-ray and neutron diffraction revealed the formation of a filled Ice-I arrangement that was previously predicted to only occur under high pressures. 17O NMR spectra suggest that the onset of melting for the water in the UMONT channels occurs at 98 K and the presence of ice-like water up to 293 K, indicating that the complete ice-water transition does not occur before dehydration of the material. Overall, the water behavior differs significantly from hydrophobic single-walled carbon nanotubes indicating precise control over water can be achieved through rational design of hybrid materials.

Nanoconfined Water in Pillared Zeolites Probed by 1H Nuclear Magnetic Resonance

Here, we report the results of our 1H nuclear magnetic resonance study of the dynamics of water molecules confined in zeolites (mordenite and ZSM-5 structures) with hierarchical porosity (micropores in zeolite lamella and mesopores formed by amorphous SiO2 in the inter-lamellar space). 1H nuclear magnetic resonance (NMR) spectra show that water experiences complex behavior within the temperature range from 173 to 298 K. The temperature dependence of 1H spin-lattice relaxation evidences the presence of three processes with different activation energies: freezing (about 30 kJ/mol), fast rotation (about 10 kJ/mol), and translational motion of water molecules (23.6 and 26.0 kJ/mol for pillared mordenite and ZSM-5, respectively). For translational motion, the activation energy is markedly lower than for water in mesoporous silica or zeolites with similar mesopore size but with disordered secondary porosity. This indicates that the process of water diffusion in zeolites with hierarchical porosity is governed not only by the presence of mesopores, but also by the mutual arrangement of meso- and micropores. The translational motion of water molecules is determined mainly by zeolite micropores.

Probing fluconazole deposition inside mesoporous silica using solid-state NMR spectroscopy: Crystallization of a confined metastable form and phase transformations under storage conditions

Encapsulation of molecules into mesoporous silica carriers continues to attract considerable interest in the area of drug delivery and crystal engineering. Here, MCM-41, SBA-15 and MCF silica matrices were used to encapsulate fluconazole (FLU), a pharmaceutically relevant molecule with known conformational flexibility, using the melting method. The composites have been characterized using 1H, 13C and 19F NMR spectroscopy, nitrogen adsorption, PXRD and thermal analysis (DSC, TGA). Drug loading up to 50 wt% allowed us to probe the crystallization process and to detect different local environments of confined FLU molecules. 19F NMR spectroscopy enabled us to detect the gradual pore filling of silica with FLU and differentiate the amorphous domains and surface species. The use of the complementary structural and thermal techniques enabled us to monitor crystallization of the metastable FLU form II in MCF. Using 1H and 19F NMR spectroscopy we observed pore-size dependent reversible dehydration/hydration behaviour in the MCM and SBA composites. As water content has considerable importance in understanding of physicochemical stability and shelf-life of pharmaceutical formulations, experimental evidence of the effect of API-water-carrier interactions on the API adsorption mechanism on silica surface is highlighted.

Ion solvation as a predictor of lanthanide adsorption structures and energetics in alumina nanopores

Adsorption reactions at solid-water interfaces define elemental fate and transport and enable contaminant clean-up, water purification, and chemical separations. For nanoparticles and nanopores, nanoconfinement may lead to unexpected and hard-to-predict products and energetics of adsorption, compared to analogous unconfined surfaces. Here we use X-ray absorption fine structure spectroscopy and operando flow microcalorimetry to determine nanoconfinement effects on the energetics and local coordination environment of trivalent lanthanides adsorbed on Al2O3 surfaces. We show that the nanoconfinement effects on adsorption become more pronounced as the hydration free energy, ΔGhydr, of a lanthanide decreases. Neodymium (Nd3+) has the least exothermic ΔGhydr (-3336 kJ·mol-1) and forms mostly outer-sphere complexes on unconfined Al2O3 surfaces but shifts to inner-sphere complexes within the 4 nm Al2O3 pores. Lutetium (Lu3+) has the most exothermic ΔGhydr (-3589 kJ·mol-1) and forms inner-sphere adsorption complexes regardless of whether Al2O3 surfaces are nanoconfined. Importantly, the energetics of adsorption is exothermic in nanopores only, and becomes endothermic with increasing surface coverage. Changes to the energetics and products of adsorption in nanopores are ion-specific, even within chemically similar trivalent lanthanide series, and can be predicted by considering the hydration energies of adsorbing ions.

Formic and acetic acid pKa values increase under nanoconfinement

Organic acids are prevalent in the environment and their acidity and the corresponding dissociation constants can change under varying environmental conditions. The impact of nanoconfinement (when acids are confined within nanometer-scale domains) on physicochemical properties of chemical species is poorly understood and is an emerging field of study. By combining infrared and Raman spectroscopies with molecular dynamics (MD) simulations, we quantified the effect of nanoconfinement in silica nanopores on one of the fundamental chemical reactions-the dissociation of organic acids. The pKa of formic and acetic acids confined within cylindrical silica nanopores with 4 nm diameters were measured. MD models were constructed to calculate the shifts in the pKa values of acetic acid nanoconfined within 1, 2, 3, and 4 nm silica slit pores. Both experiments and MD models indicate a decrease in the apparent acid dissociation constants (i.e., increase in the pKa values) when organic acids are nanoconfined. Therefore, nanoconfinement stabilizes the protonated species. We attribute this observation to (1) a decrease in the average dielectric response of nanoconfined aqueous solutions where charge screening may be decreased; or (2) an increase in proton concentration inside nanopores, which would shift the equilibrium towards the protonated form. Overall, the results of this study provide the first quantification of the pKa values for nanoconfined formic and acetic acids and pave the way for a unifying theory predicting the impact of nanoconfinement on acid-base chemistry.

Oxide- and Silicate-Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by "anomalies" or "non-idealities" such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide- and silicate-water interfaces. This critical review discusses how science progresses from understanding ideal solid-water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. We anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

Temporal nanofluid environments induce prebiotic condensation in water

Water is a problem in understanding chemical evolution towards life's origins on Earth. Although all known life is being based on water key prebiotic reactions are inhibited by it. The prebiotic plausibility of current strategies to circumvent this paradox is questionable regarding the principle that evolution builds on existing pathways. Here, we report a straightforward way to overcome the water paradox in line with evolutionary conservatism. By utilising a molecular deposition method as a physicochemical probe, we uncovered a synergy between biomolecule assembly and temporal nanofluid conditions that emerge within transient nanoconfinements of water between suspended particles. Results from fluorometry, quantitative PCR, melting curve analysis, gel electrophoresis and computational modelling reveal that such conditions induce nonenzymatic polymerisation of nucleotides and promote basic cooperation between nucleotides and amino acids for RNA formation. Aqueous particle suspensions are a geochemical ubiquitous and thus prebiotic highly plausible setting. Harnessing nanofluid conditions in this setting for prebiotic syntheses is consistent with evolutionary conservatism, as living cells also work with temporal nanoconfined water for biosynthesis. Our findings add key insights required to understand the transition from geochemistry to biochemistry and open up systematic pathways to water-based green chemistry approaches in materials science and nanotechnology.

Conversion of Recovered Ammonia and Carbon Dioxide into Urea in the Presence of Catalytically Active Copper Species in Nanospaces of Porous Silica Hollow Spheres

The present study firstly reported porous silica hollow spheres as a host material for recovery of ammonia and carbon dioxide and conversion of the compounds into urea. These compounds were effectively introduced into the hollow spheres from an aqueous solution including ammonium and carbonate ions accompanied with catalytically active copper ions from the analyses of diffuse reflectance infrared Fourier transform (DRIFT) spectra and diffusion reflectance ultraviolet-visible and near-infrared (DR UV-vis-NIR) spectra. The ammonium and carbonate ions were converted into urea in the hollow spheres at 323 K under 0.5 MPa of argon atmosphere from the results of the DRIFT spectra. From the results of nitrogen sorption isotherms and X-ray photoelectron spectra (XPS) spectra, the amount of the generated urea depended on the amount of the introduced ammonium ions and the size distribution of the nanospaces in the hollow spheres. Urea was highly generated in the hollow spheres with a high amount of ammonium ions and well-ordered nanospaces from the reactants at high density.

Physical properties and biological effects of ceramic materials emitting infrared radiation for pain, muscular activity, and musculoskeletal conditions

BACKGROUND

Up to 33% of the general population worldwide suffer musculoskeletal conditions, with low back pain being the single leading cause of disability globally. Multimodal therapeutic options are available to relieve the pain associated with muscular disorders, including physical, complementary, and pharmacological therapies. However, existing interventions are not disease modifying and have several limitations.

METHOD

Literature review.

RESULTS

In this context, the use of nonthermal infrared light delivered via patches, fabrics, and garments containing infrared-emitting bioceramic minerals have been investigated. Positive effects on muscular cells, muscular recovery, and reduced inflammation and pain have been reported both in preclinical and clinical studies. There are several hypotheses on how infrared may contribute to musculoskeletal pain relief, however, the full mechanism of action remains unclear. This article provides an overview of the physical characteristics of infrared radiation and its biological effects, focusing on those that could potentially explain the mechanism of action responsible for the relief of musculoskeletal pain.

CONCLUSIONS

Based on the current evidence, the following pathways have been considered: upregulation of endothelial nitric oxide synthase, increase in nitric oxide bioavailability, anti-inflammatory effects, and reduction in oxidative stress.

Inverse Design of Pore Wall Chemistry To Control Solute Transport and Selectivity

Next-generation membranes for purification and reuse of highly contaminated water require materials with precisely tuned functionality to address key challenges, including the removal of small, charge-neutral solutes. Bioinspired multifunctional membrane surfaces enhance transport properties, but the combinatorically large chemical space is difficult to navigate through trial and error. Here, we demonstrate a computational inverse design approach to efficiently identify promising materials and elucidate design rules. We develop a combined evolutionary optimization, machine learning, and molecular simulation workflow to spatially design chemical functional group patterning in a model nanopore that enhances transport of water relative to solutes. The genetic optimization discovers nonintuitive functionalization strategies that hinder the transport of solutes through the pore, simply by patterning hydrophobic methyl and hydrophilic hydroxyl functional groups. Examining these patterns, we demonstrate that they exploit an unexpected diffusive solute hopping mechanism. This inverse design procedure and the identification of novel molecular mechanisms for pore chemical heterogeneity to impact solute selectivity demonstrate new routes to the design of membrane materials with novel functionalities. More broadly, this work illustrates how chemical design is a powerful strategy to modulate water-mediated surface-solute interactions in complex, soft material systems that are relevant to diverse technologies.

Ligand-Dependent Volumetric Characterization of Manganese Riboswitch Folding: A High-Pressure Single-Molecule Kinetic Study

Nanoscopic differences in free volume result in pressure-dependent changes in free energies which can therefore impact folding/unfolding stability of biomolecules. Although such effects are typically insignificant under ambient pressure conditions, they are crucially important for deep ocean marine life, where the hydraulic pressure can be on the kilobar scale. In this work, single molecule FRET spectroscopy is used to study the effects of pressure on both the kinetics and overall thermodynamics for folding/unfolding of the manganese riboswitch. Detailed pressure-dependent analysis of the conformational kinetics allows one to extract precision changes (σ ≲ 4-8 ų) in free volumes not only between the fully folded/unfolded conformations but also with respect to the folding transition state of the manganese riboswitch. This permits first extraction of a novel "reversible work" free energy (PΔV) landscape, which reveals a monotonic increase in manganese riboswitch volume along the folding coordinate. Furthermore, such a tool permits exploration of pressure-dependent effects on both Mn²⁺ binding and riboswitch folding, which demonstrate that ligand attachment stabilizes the riboswitch under pressure by decreasing the volume increase upon folding (ΔΔV < 0). Such competition between ligand binding and pressure-induced denaturation dynamics could be of significant evolutionary advantage, compensating for a weakening in riboswitch tertiary structure with pressure-mediated ligand binding and promotion of folding response.

Three-Dimensional Confinement of Water: H2O Exhibits Long-Range (>50 nm) Structure while D2O Does Not

Water is the liquid of life thanks to its three-dimensional adaptive hydrogen (H)-bond network. Confinement of this network may lead to dramatic structural changes influencing chemical and physical transformations. Although confinement effects occur on a <1 nm length scale, the upper length scale limit is unknown. Here, we investigate 3D-confinement over lengths scales ranging from 58-140 nm. By confining water in zwitterionic liposomes of different sizes and measuring the change in H-bond network conformation using second harmonic scattering (SHS), we determined long-range confinement effects in light and heavy water. D₂O displays no detectable 3D-confinement effects <58 nm (<3 × 10⁶ D₂O molecules). H₂O is distinctly different. The vesicle enclosed inner H-bond network has a different conformation compared to the outside network and the SHS response scales with the volume of the confining space. H₂O displays confinement effects over distances >100 nm (>2 × 10⁷ H₂O molecules).

Pore size effects on surface charges and interfacial electrostatics of mesoporous silicas

Water in confinement becomes more structured than bulk water, and its properties, such as the dielectric constant, change. It remains unclear, however, how the interfacial reactions in confinement, such as the adsorption of ions on the surfaces of small pores, differ from those in larger spaces. We focused on the deprotonation reaction of hydroxyl groups, a fundamental surface reaction, and investigated the dependence of the surface charge density on pore size by determining the surface charge densities of six types of mesoporous silicas with micropores and mesopores at different ionic strengths and pH levels from batch titration tests. The surface complexation model assuming a potential distribution based on the Poisson-Boltzmann equation in cylindrical coordinates was fitted to the obtained surface charge densities to relate the electrostatics near the surface to the surface reaction. The results showed that the absolute values of the surface charge densities decreased with decreasing pore diameter due to the overlap of the electrical double layers. Furthermore, the capacitance of the Stern layer optimized by fitting decreased with decreasing pore diameter, especially in pores smaller than 4 nm in diameter, which suggested that the dielectric constants of water decreased near the surfaces of small pores.

Probing electrolyte–silica interactions through simulations of the infrared spectroscopy of nanoscale pores

The structural and dynamical properties of nanoconfined solutions can differ dramatically from those of the corresponding bulk systems. Understanding the changes induced by confinement is central to controlling the behavior of synthetic nanostructured materials and predicting the characteristics of biological and geochemical systems. A key outstanding issue is how the molecular-level behavior of nanoconfined electrolyte solutions is reflected in different experimental, particularly spectroscopic, measurements. This is addressed here through molecular dynamics simulations of the OH stretching infrared (IR) spectroscopy of NaCl, NaBr, and NaI solutions in isotopically dilute HOD/D2O confined in hydroxylated amorphous silica slit pores of width 1–6 nm and pH [Formula: see text]. In addition, the water reorientation dynamics and spectral diffusion, accessible by pump–probe anisotropy and two-dimensional IR measurements, are investigated. The aim is to elucidate the effect of salt identity, confinement, and salt concentration on the vibrational spectra. It is found that the IR spectra of the electrolyte solutions are only modestly blue-shifted upon confinement in amorphous silica slit pores, with both the size of the shift and linewidth increasing with the halide size, but these effects are suppressed as the salt concentration is increased. This indicates the limitations of linear IR spectroscopy as a probe of confined water. However, the OH reorientational and spectral diffusion dynamics are significantly slowed by confinement even at the lowest concentrations. The retardation of the dynamics eases with increasing salt concentration and pore width, but it exhibits a more complex behavior as a function of halide.

Urea Disrupts the AOT Reverse Micelle Structure at Low Temperatures

Aside from its prominent role in the excretory system, urea is also a known protein denaturant. Here, we characterize urea as it behaves in confined spaces of AOT (sodium bis(2-ethylhexyl) sulfosuccinate) reverse micelles as a model of tight, confined spaces found at the subcellular level. Dynamic light scattering revealed that low temperatures (275 K) caused the smallest of the reverse micelle sizes, w₀ = 10, to destabilize and dramatically increase in apparent hydrodynamic diameter. We attribute this to urea embedded into the surfactant interface as confirmed by 2D ¹H-NOESY NMR spectroscopy. This increase in size in turn caused the hydrogen exchange between urea and water within the nanosized reverse micelles to increase as measured by 1D EXSY-NMR. A minimal enlarging effect and no increase in hydrogen exchange were observed when aqueous urea was introduced into w₀ = 15 or 20 reverse micelles, suggesting that this effect is unique to particularly small-diameter spaces (∼7 nm).

Dielectric Properties of Water in Charged Nanopores

In this study, we examine the spectral dielectric properties of liquid water in charged nanopores over a wide range of frequencies (0.3 GHz to 30 THz) and pore widths (0.3 to 5 nm). This has been achieved using classical molecular dynamics simulations of hydrated Na-smectite, the prototypical swelling clay mineral. We observe a drastic (20-fold) and anisotropic decrease in the static relative permittivity of the system as the pore width decreases. This large decrement in static permittivity reflects a strong attenuation of the main Debye relaxation mode of liquid water. Remarkably, this strong attenuation entails very little change in the time scale of the collective relaxation. Our results indicate that water confined in charged nanopores is a distinct solvent with a much weaker collective nature than bulk liquid water, in agreement with recent observations of water in uncharged nanopores. Finally, we observe remarkable agreement between the dielectric properties of the simulated clay system against a compiled set of soil samples at various volumetric water contents. This implies that saturation may not be the sole property dictating the dielectric properties of soil samples, rather that the pore-size distribution of fully saturated nanopores may also play a critically important role.

Transport Properties of Methyl-Terminated Germanane Microcrystallites

Germanane is a two-dimensional material consisting of stacks of atomically thin germanium sheets. It’s easy and low-cost synthesis holds promise for the development of atomic-scale devices. However, to become an electronic-grade material, high-quality layered crystals with good chemical purity and stability are needed. To this end, we studied the electrical transport of annealed methyl-terminated germanane microcrystallites in both high vacuum and ultrahigh vacuum. Scanning electron microscopy of crystallites revealed two types of behavior which arise from the difference in the crystallite chemistry. While some crystallites are hydrated and oxidized, preventing the formation of good electrical contact, the four-point resistance of oxygen-free crystallites was measured with multiple tips scanning tunneling microscopy, yielding a bulk transport with resistivity smaller than 1 Ω·cm. When normalized by the crystallite thickness, the resistance compares well with the resistance of hydrogen-passivated germanane flakes found in the literature. Along with the high purity of the crystallites, a thermal stability of the resistance at 280 °C makes methyl-terminated germanane suitable for complementary metal oxide semiconductor back-end-of-line processes.

Structure and dynamics of a water/methanol mixture confined in zeolitic imidazolate framework ZIF-8 from atomistic simulations

A classical atomistic simulation study is reported for the microscopic structure and dynamics of a water/methanol mixture confined in flexible nanoporous zeolitic imidazolate framework ZIF-8. Both the radial density distribution and vivid two-dimensional density profile demonstrate that methanol molecules can roughly be viewed as "embedded" between two layers of water molecules to form a "sandwich" structure. The reason for the formation of such a specific structure is explained based on the hydrogen-bonding state and the strength of various hydrogen bonds. The investigation of guest molecular diffusion shows that the self-diffusion coefficient of confined water is generally one to two orders of magnitude smaller than that of bulk water. In addition, the dependence of the self-diffusion coefficient on loading is non-monotonic: the self-diffusion coefficient firstly shows a significant increase and then decreases at higher loading. Moreover, both the structure and dynamics of the hydrogen bond (HB) network of confined water molecules are investigated in a spatially resolved manner. The results indicate that both the HB structure and dynamics of water molecules near the ZIF-8 surface deviate significantly from those of bulk water. However, while water molecules located at the pore center are relatively similar to bulk water molecules with respect to the HB structure, they exhibit strong slowdown in HB dynamics when compared with bulk water. This simulation study elucidates in detail the structural and dynamical properties of a water/methanol mixture in nanoscopic ZIF-8 confinement, which is expected to provide a deep insight into the role of porous fillers, such as ZIF-8, in improving the performance of the dehydration of alcohols via pervaporation and other related processes.

Infrared spectroscopic monitoring of solid-state processes

We put a spotlight on IR spectroscopic investigations in materials science by providing a critical insight into the state of the art, covering both fundamental aspects, examples of its utilisation, and current challenges and perspectives focusing on the solid state.

Confinement and Surface Sites Control Methanol Adsorbate Stability on MFI Zeolites, SBA-15, and Silica-supported Heteropoly Acid

We herein investigate methanol adsorbates on a variety of heterogeneous catalysts. We quantitatively desorb methanol from saturated MFI zeolite, SBA-15 material and silicotungstic acid (STA) supported on silica, all in...

Tuning the Dielectric Response of Water in Nanoconfinement through Surface Wettability

The tunable polarity of water can be exploited in emerging technologies including catalysis, gas storage, and green chemistry. Recent experimental and theoretical studies have shown that water can be rendered into an effectively apolar solvent under nanoconfinement. We furthermore demonstrate, through molecular simulations, that the static dielectric constant of water can be modified by changing the wettability of the confining material. We find the out-of-plane dielectric response to be highly sensitive to the level of confinement and can be reduced up to 40× , in accordance with experimental data. By altering the surface wettability from superhydrophilic to superhydrophobic, we observe a 36% increase for the out-of-plane and a 31% decrease for the in-plane dielectric constants. Our findings demonstrate the feasibility of tunable water polarity, a phenomenon with great potential for scientific and technological impact.

Bisphenol A Adsorption on Silica Particles Modified with Beta-Cyclodextrins

This study presents the synthesis of silica particles bearing two beta-cyclodextrin (BCD) (beta-cyclodextrin-BCD-OH and diamino butane monosubstituted beta-cyclodextrin-BCD-NH2). The successful synthesis of the BCD-modified silica was confirmed by FT-IR and TGA. Using contact angle measurements, BET analysis and SEM characterization, a possible formation mechanism for the generation of silica particles bearing BCD derivatives on their surface was highlighted. The obtained modified silica displayed the capacity to remove bisphenol A (BPA) from wastewater due to the presence of the BCD moieties on the surface of the silica. The kinetic analysis showed that the adsorption reached equilibrium after 180 min for both materials with qe values of 107 mg BPA/g for SiO2-BCD-OH and 112 mg BPA/g for SiO2-BCD-NH2. The process followed Ho's pseudo-second-order adsorption model sustaining the presence of adsorption sites with different activities. The fitting of the Freundlich isotherm model on the experimental results was also evaluated, confirming the BCD influence on the materials' adsorption properties.

Thin Water Films Enable Low-Temperature Magnesite Growth Under Conditions Relevant to Geologic Carbon Sequestration

Injecting supercritical CO₂ (scCO₂) into basalt formations for long-term storage is a promising strategy for mitigating CO₂ emissions. Mineral carbonation can result in permanent entrapment of CO₂; however, carbonation kinetics in thin H₂O films in humidified scCO₂ is not well understood. We investigated forsterite (Mg₂SiO₄) carbonation to magnesite (MgCO₃) via amorphous magnesium carbonate (AMC; MgCO₃·xH₂O, 0.5 < x < 1), with the goal to establish the fundamental controls on magnesite growth rates at low H₂O activity and temperature. Experiments were conducted at 25, 40, and 50 °C in 90 bar CO₂ with a H₂O film thickness on forsterite that averaged 1.78 ± 0.05 monolayers. In situ infrared spectroscopy was used to monitor forsterite dissolution and the growth of AMC, magnesite, and amorphous SiO₂ as a function of time. Geochemical kinetic modeling showed that magnesite was supersaturated by 2 to 3 orders of magnitude and grew according to a zero-order rate law. The results indicate that the main drivers for magnesite growth are sustained high supersaturation coupled with low H₂O activity, a combination of thermodynamic conditions not attainable in bulk aqueous solution. This improved understanding of reaction kinetics can inform subsurface reactive transport models for better predictions of CO₂ fate and transport.

Heterogeneous Microscopic Dynamics of Intruded Water in a Superhydrophobic Nanoconfinement: Neutron Scattering and Molecular Modeling

With their strong confining porosity and versatile surface chemistry, zeolitic imidazolate frameworks-including the prototypical ZIF-8-display exceptional properties for various applications. In particular, the forced intrusion of water at high pressure (∼25 MPa) into ZIF-8 nanopores is of interest for energy storage. Such a system reveals also ideal to study experimentally water dynamics and thermodynamics in an ultrahydrophobic confinement. Here, we report on neutron scattering experiments to probe the molecular dynamics of water within ZIF-8 nanopores under high pressure up to 38 MPa. In addition to an overall confinement-induced slowing down, we provide evidence for strong dynamical heterogeneities with different underlying molecular dynamics. Using complementary molecular simulations, these heterogeneities are found to correspond to different microscopic mechanisms inherent to vicinal molecules located in strongly adsorbing sites (ligands) and other molecules nanoconfined in the cavity center. These findings unveil a complex microscopic dynamics, which results from the combination of surface residence times and exchanges between the cavity surface and center.

Confinement driven anomalous freezing in nano porous spray dried microspheres

One-step evaporative jamming of colloidal silica particles in contact-free spray droplets resulted in well-defined powder micro-granules with interstitial nanopores. This paper reports the anomalous freezing behaviour of confined water in the microspheres synthesized using spray drying. It has been revealed that the freezing point of water in these microspheres gets significantly lowered (∼-45 °C) owing to the confinement effect. Thermoporometry results are corroborated with the structural details obtained using complementary techniques of gas adsorption measurements and small-angle x-ray scattering.

Hydrogen-bond network distortion of water in the soft confinement of Nafion membrane

A Compton spectroscopy investigation is carried out in hydrated Nafion membranes, enabling identification of distortions in the hydrogen-bond distribution of the polymer hydrating water by means of the subtle changes reflected by the Compton profiles. Indeed, deformations of the Compton profiles are observed when varying hydration, and two different bonding kinds are associated with the water molecules: at low hydration, water surrounds the sulfonic groups, while on increasing hydration, water molecules occupy the interstitial cavities formed upon swelling of the membrane. The analysis is proposed in terms of averaged OH bond length variation. A sizable contraction of the OH distance is observed at low hydration (∼0.09 Å), while at higher hydration levels, the contraction is smaller (∼0.02 Å) and the OH bond length is closer to bulk water. An evaluation of the electron kinetic energy indicates that the spatial changes associated with the water distribution correspond to a consistent binding energy increase. Distinct temperature dependences of each water population are observed, which can be straightly related to water desorption into ice on cooling below the freezing point.

Diffusion of confined fluids in microporous zeolites and clay materials

Fluids exhibit remarkable variation in their structural and dynamic properties when they are confined at the nanoscopic scale. Various factors, including geometric restriction, the size and shape of the guest molecules, the topology of the host, and guest-host interactions, are responsible for the alterations in these properties. Due to their porous structures, aluminosilicates provide a suitable host system for studying the diffusion of sorbates in confinement. Zeolites and clays are two classes of the aluminosilicate family, comprising very ordered porous or layered structures. Zeolitic materials are important due to their high catalytic activity and molecular sieving properties. Guest molecules adsorbed by zeolites display many interesting features including unidimensional diffusion, non-isotropic rotation, preferred orientation and levitation effects, depending on the guest and host characteristics. These are useful for the separation of hydrocarbons which commonly exist as mixtures in nature. Similarly, clay materials have found application in catalysis, desalination, enhanced oil recovery, and isolation barriers used in radioactive waste disposal. It has been shown that the bonding interactions, level of hydration, interlayer spacing, and number of charge-balancing cations are the important factors that determine the nature of diffusion of water molecules in clays. Here, we present a review of the current status of the diffusion mechanisms of various adsorbed species in different microporous zeolites and clays, as investigated using quasielastic neutron scattering and classical molecular dynamics simulation techniques. It is impossible to write an exhaustive review of the subject matter, as it has been explored over several decades and involves many research topics. However, an effort is made to cover the relevant issues specific to the dynamics of different molecules in microporous zeolites and clay materials and to highlight a variety of interesting features that are important for both practical applications and fundamental aspects.

Investigation of the Post-Synthetic Confinement of Fluorous Liquids Inside Mesoporous Silica Nanoparticles

Perfluorocarbon (PFC) filled nanoparticles are increasingly being investigated for various biomedical applications. Common approaches for PFC liquid entrapment involve surfactant-based emulsification and Pickering emulsions. Alternatively, PFC liquids are capable of being entrapped inside hollow nanoparticles via a postsynthetic loading method (PSLM). While the methodology for the PSLM is straightforward, the effect each loading parameter has on the PFC entrapment has yet to be investigated. Previous work revealed incomplete filling of the hollow nanoparticles. Changing the loading parameters was expected to influence the ability of the PFC to fill the core of the nanoparticles. Hence, it would be possible to model the loading mechanism and determine the influence each factor has on PFC entrapment by tracking the change in loading yield and efficiency of PFC-filled nanoparticles. Herein, neat PFC liquid was loaded into silica nanoparticles and extracted into aqueous phases while varying the sonication time, concentration of nanoparticles, volume ratio between aqueous and fluorous phases, and pH of the extraction water. Loading yields and efficiency were determined via ¹⁹F nuclear magnetic resonance and N₂ physisorption isotherms. Sonication time was indicated to have the strongest correlation to loading yield and efficiency; however, method validation revealed that the current model does not fully explain the loading capabilities of the PSLM. Confounding variables and more finely controlled parameters need to be considered to better predict the behavior and loading capacity by the PSLM and warrants further study.

Proton-Coupled Electron Transfer in the Aqueous Nanochannels of Lyotropic Liquid Crystals: Interplay of H-Bonding and Polarity Effects

A molecular-level description of the aqueous nanochannels in lyotropic liquid crystals (LLCs) is crucial for their widespread utilization in diverse fields. Herein, the polarity and hydrogen bonding effects of LLC water molecules have been simultaneously explored using a single probe, 4'-N,N-dimethylamino-3-hydroxyflavone (DMA3HF), by the unique multiparametric sensitivity of the excited state proton-coupled electron transfer (PCET) phenomenon. The decreased ESIPT efficiency and the significantly retarded ESIPT dynamics (>20 times) of DMA3HF in the LLC phases suggests the dominant influence of strong hydrogen-bonded solute-solvent complexes that leads to a high activation barrier for ESIPT in the mesophases. The effects of hydrogen bonding on ESIPT have been elucidated by enhanced sampling techniques based on classical MD simulations of DMA3HF in explicit water. ESIPT via an extended hydrogen-bonded water wire is associated with a significantly high ESIPT activation barrier, substantiating the experimentally observed slow ESIPT dynamics inside the LLCs.

Simulations of the IR and Raman spectra of water confined in amorphous silica slit pores

Water in nano-scale confining environments is a key element in many biological, material, and geological systems. The structure and dynamics of the liquid can be dramatically modified under these conditions. Probing these changes can be challenging, but vibrational spectroscopy has emerged as a powerful tool for investigating their behavior. A critical, evolving component of this approach is a detailed understanding of the connection between spectroscopic features and molecular-level details. In this paper, this issue is addressed by using molecular dynamics simulations to simulate the linear infrared (IR) and Raman spectra for isotopically dilute HOD in D₂O confined in hydroxylated amorphous silica slit pores. The effect of slit-pore width and hydroxyl density on the silica surface on the vibrational spectra is also investigated. The primary effect of confinement is a blueshift in the frequency of OH groups donating a hydrogen bond to the silica surface. This appears as a slight shift in the total (measurable) spectra but is clearly seen in the distance-based IR and Raman spectra. Analysis indicates that these changes upon confinement are associated with the weaker hydrogen-bond accepting properties of silica oxygens compared to water molecules.

Low temperature and limited water activity reveal a pathway to magnesite via amorphous magnesium carbonate

Forsterite carbonated in thin H2O films to magnesite via amorphous magnesium carbonate during reaction with H2O-bearing liquid CO2 at 25 °C. This novel reaction pathway contrasts with previous studies that were carried out at higher H2O activity and temperature, where more highly hydrated nesquehonite was the metastable intermediate.

Anomaly of the dielectric function of water under confinement and its role in van der Waals interactions

We present a theoretical calculation of the changes in the Hamaker constant due to the anomalous reduction of the static dielectric function of water. Under confinement, the dielectric function of water decreases from a bulk value of 80 down to 2. If the confining walls are made of a dielectric material, the Hamaker constant reduces by almost 90%. However, if the confinement is realized with metallic plates, there is little change in the Hamaker constant. Additionally, we show that confinement can be used to decreases the Debye screening length without changing the salt concentration. This in turn is used to change the Hamaker constant in the presence of electrolytes.