A highly responsive NH3 sensor based on Pd-loaded ZnO nanoparticles prepared via a chemical precipitation approach

Palladium‑zinc ferrite varnished hydroxyapatite spherocuboids for electrochemical detection of carcinogenic food preservatives

The demand for processed foods relies heavily on synthetic antioxidants like TBHQ and BHA to prevent spoilage. However, their excessive use poses health risks, prompting regulatory measures in many countries to ensure food safety. In this concern, a proficient electrochemical sensor for the simultaneous detection of tert-butylhydroquinone (TBHQ) and butylated hydroxyanisole (BHA) was designed. A comparatively greener hydroxyapatite (HAP) supported zinc ferrite (ZF) nanosensor was developed with conducting coating of Pd nanoparticles. A consolidated and mechanistic approach was opted to reduce the band gap and agglomeration the magnetic ZF nanoparticles. The interesting spherocuboidal morphology of the synthesized nanocomposite with good porosity enhanced the detection performance of the sensor. The proposed platform displayed good detection limits of both TBHQ and BHA (0.73 and 5.6 nM for TBHQ and BHA, respectively). The nanosensor successfully detected TBHQ and BHA in food samples proved its potential for the development of commercially competitive sensor.

Advanced NH3 Detection by 1D Nanostructured La:ZnO Sensors with Novel Intrinsic p-n Shifting and Ultrahigh Baseline Stability

Due to its stability, transportability, and ability to be produced using renewable energy sources, NH3 has become an attractive option for hydrogen production and storage. Detecting NH3 is then essential, being a toxic and flammable gas that can pose dangers if not properly monitored. ZnO chemiresistive sensors have shown great potential in real NH3 monitoring applications; yet, research and development in this area are ongoing due to reported limitations, like baseline instabilities and sensitivity to environmental factors, including temperature, humidity, and interferent gases. Herein, we suggest an approach to obtain sensors with competitive performance based on ZnO semiconducting metal oxides. For this purpose, one-dimensional nanostructured pure and La-doped ZnO films were synthesized hydrothermally. Incorporating large rare earth ions, like La, into the bulk lattice of ZnO is challenging and can lead to surface defects that are influential in gas-sensing reactions. The sensors experienced a temperature-induced p-n shifting at about 100 °C, verified by the Hall effect and AC impedance measurements. The doped sensor showed exceptional stepwise baseline stability and outstanding performance at a relatively low operating temperature (150 °C) with a sensing response of 91 at best (@ 50 ppm NH3) and recorded a tolerance to water vapor up to 70% RH. Alongside p-n shifting, the enhanced performance was discussed in correlation with La doping-triggered changes in the nanostructural and surfacial properties of the films. We validated the proposed technique by producing similar sensors and performing multiple replicates to ensure consistency and reproducibility. We also introduced the fill factor concept into the gas sensor field as a new trustworthy parameter that could improve sensor performance assessment and help rate sensors based on deviation from ideality.

Engineering of Mesoporous Cube-like In2O3 Products as Ethanol Detection Platform at Low Operating Temperature: Effects of Different Transition Metals as Dopant Ions

Although most semiconductor metal oxides including In2O3 show acceptable sensitivity to volatile organic compounds, it is difficult to detect ethanol effectively at low operating temperatures and detection levels. In this study, pure and Co-, Ni-, and Cu-doped In2O3 products with their doping content maintained at 1 mol % were successfully produced using a hydrothermal approach. Explicit contrast on the structural, microstructural, and textural properties of the synthesized In2O3 products was examined to determine their gas sensing performance. The Cu-doped In2O3 sensor demonstrated improved response of 15.3 to 50 ppm ethanol and has satisfactory selectivity, stability, low detection limit of 0.2, humidity resistance, and decreased working temperature of 80 °C compared to 150 °C of the pure In2O3 sensor. This optimal gas sensing performance is derived from the cube-like morphology assembled with interlinked nanoparticles, which favors trapping more target gas molecules and exposing more active sites, thereby greatly improving its sensing ability. This study showed that the Cu-doped In2O3 sensor with 1 mol % is suitable for monitoring ethanol gas for food safety applications.

Prospects of 2D graphdiynes and their applications in desalination and wastewater remediation

Water is an indispensable part of human life that affects health and food intake. Water pollution caused by rapid industrialization, agriculture, and other human activities affects humanity. Therefore, researchers are prudent and cautious regarding the use of novel materials and technologies for wastewater remediation. Graphdiyne (GDY), an emerging 2D nanomaterial, shows promise in this direction. Graphdiyne has a highly symmetrical π-conjugated structure consisting of uniformly distributed pores; hence, it is favorable for applications such as oil-water separation and organic-pollutant removal. The acetylenic linkage in GDY can strongly interact with metal ions, rendering GDY applicable to heavy-metal adsorption. In addition, GDY membranes that exhibit 100% salt rejection at certain pressures are potential candidates for wastewater treatment and water reuse via desalination. This review provides deep insights into the structure, properties, and synthesis methods of GDY, owing to which it is a unique, promising material. In the latter half of the article, various applications of GDY in desalination and wastewater treatment have been detailed. Finally, the prospects of these materials have been discussed succinctly.

A sigh-performance hydrogen gas sensor based on Ag/Pd nanoparticle-functionalized ZnO nanoplates

As a source of clean energy, hydrogen (H₂) is a promising alternative to fossil fuels in reducing the carbon footprint. However, due to the highly explosive nature of H₂, developing a high-performance sensor for real-time detection of H₂ gas at low concentration is essential. Here, we demonstrated the H₂ gas sensing performance of Ag/Pd nanoparticle-functionalized ZnO nanoplates. Bimetallic Ag/Pd nanoparticles with an average size of 8 nm were prepared and decorated on the surface of ZnO nanoplates to enhance the H₂ gas sensing performance. Compared with pristine ZnO, the sensor based on ZnO nanoplate doped with Ag/Pd (0.025 wt%) exhibited an outstanding response upon exposure to H₂ gas (R _a/R _g = 78 for 500 ppm) with fast response time and speedy recovery. The sensor also showed excellent selectivity for the detection of H₂ over the interfering gases (i.e., CO, NH₃, H₂S, and VOCs). The superior gas sensing of the sensor was dominated by the morphological structure of ZnO, and the synergistic effect of strong adsorption and the optimum catalytic characteristics of the bimetallic Ag/Pd enhances the hydrogen response of the sensors. Thus, bimetallic Ag/Pd-doped ZnO is a promising sensing material for the quantitative determination of H₂ concentration towards industrial applications.

Fe3O4@uio66 core-shell composite for detection of electrolyte leakage from lithium-ion batteries

Fe₃O₄is an environmentally friendly gas sensing material with high response, but the cross-response to various analytes and poor thermal stability limit its practical applications. In this work, we prepared Fe₃O₄@uio66 core-shell composite via a facile method. The selective response to volatile organic compounds, especially to electrolyte vapors of lithium-ion batteries, as well as long-term stability of Fe₃O₄@uio66 has been dramatically enhanced compared to pure Fe₃O₄, due to the preconcentrator feature and thermal stability of the uio66 thin shell. Real-time detection of electrolyte leakage for an actual punctured lithium-ion battery was further demonstrated. The Fe₃O₄@uio66 sensor, after aging for 3 months, was able to detect the electrolyte leakage in 30 s, while the voltage of the punctured battery was maintained at the same level as that of a pristine battery over 6 h. This practical test results verified ability of the Fe₃O₄@uio66 sensor with long-term aging stability for hours of early safety warning of lithium-ion batteries.

Nanomaterial Gas Sensors for Biosensing Applications: A Review

BACKGROUND

Nanomaterial is one of the most used materials for various gas sensing applications to detect toxic gases, human breath, and other specific gas sensing. One of the most important applications of nanomaterial based gas sensors is biosensing applications. In this review article, the gas sensors for biosensing are discussed on the basis of crystalline structure and different categories of nanomaterial.

METHODS

In this paper, firstly, rigorous efforts have been made to find out research questions by going through a structured and systematic survey of available peer reviewed high quality articles in this field. The papers related to nanomaterial based biosensors are then reviewed qualitatively to provide substantive findings from the recent developments in this field.

RESULTS

In this mini-review article, firstly, classifications of nanomaterial gas sensors have been presented on the basis of the crystalline structure of nanomaterial and different types of nanomaterial available for biosensing applications. Further, the gas sensors based on nanomaterial for biosensing applications are collected and reviewed in terms of their performance parameters such as sensing material used, target gas component, detection ranges (ppm-ppb), response time, operating temperature and method of detection, etc. The different nanomaterials possess slightly different sensing and morphological properties due to their structure; therefore, it can be said that a nanomaterial must be selected carefully for a particular application. The 1D nanomaterials show the best selectivity and sensitivity for gases available in low concentration ranges due to their miniaturised structure compared to 2D and 3D nanomaterials. However, these 2D and 3D nanomaterials also so good sensing properties compared to bulk semiconductor materials. The polymer and nanocomposites which are also discussed in this patent article have opened the door for future research and have great potential for new generation gas sensors for detecting biomolecules.

CONCLUSION

These nanomaterials extend great properties towards sensing the application of different gases for a lower concentration of particular gas particles. Nano polymer and nanocomposites have great potential to be used as gas sensors for the detection of biomolecules.

A highly sensitive fluorescent sensor for ammonia detection based on aggregation-induced emission luminogen-doped liquid crystals

As a toxic substance, ammonia can cause serious irritation to the human respiratory system and lungs. Although many detection techniques have been reported, most of them have drawbacks, such as expensive devices and complex and time-consuming fabrication processes. Thus, it is important to develop a simple method for ammonia detection. In this paper, we demonstrate a highly sensitive fluorescent sensor for ammonia detection based on aggregation-induced emission luminogen-doped liquid crystals without the use of polarizers. The homeotropic orientation of the liquid crystals on a modified substrate can be disturbed by ammonia, resulting in the fluorescence intensity change of an aggregation-induced emission luminogen. This aggregation-induced emission luminogen-doped liquid crystal-based fluorescent sensor for ammonia detection exhibited a low detection limit of 5.4 ppm, which is 3 times lower than previously reported liquid crystal-based optical sensors. The detection range is also broad from 0 ppm to 1600 ppm. Meanwhile, this sensor can be applied to detect aqueous ammonia with a low limit of detection of 1.8 ppm. The proposed fluorescent sensor for ammonia detection based on an aggregation-induced emission luminogen-doped liquid crystal is highly sensitive, highly selective, simple, and low cost with wide potential applications in chemical and biological fields. This strategy of designing a liquid crystal fluorescent sensor provides an inspiring stage for other toxic chemical substrates by changing specific decorated molecules.

Nanoparticle and Nanostructure Synthesis and Controlled Growth Methods

Nanomaterials are materials with one or more nanoscale dimensions (internal or external) (i.e., 1 to 100 nm). The nanomaterial shape, size, porosity, surface chemistry, and composition are controlled at the nanoscale, and this offers interesting properties compared with bulk materials. This review describes how nanomaterials are classified, their fabrication, functionalization techniques, and growth-controlled mechanisms. First, the history of nanomaterials is summarized and then the different classification methods, based on their dimensionality (0-3D), composition (carbon, inorganic, organic, and hybrids), origin (natural, incidental, engineered, bioinspired), crystal phase (single phase, multiphase), and dispersion state (dispersed or aggregated), are presented. Then, the synthesis methods are discussed and classified in function of the starting material (bottom-up and top-down), reaction phase (gas, plasma, liquid, and solid), and nature of the dispersing forces (mechanical, physical, chemical, physicochemical, and biological). Finally, the challenges in synthesizing nanomaterials for research and commercial use are highlighted.

Study on Sensing Mechanism of Volatile Organic Compounds Using Pt-Loaded ZnO Nanocrystals

Understanding the surface chemistry of target gases on sensing materials is essential for designing high-performance gas sensors. Here, we report the effect of Pt-loading on the sensing of volatile organic compounds (VOCs) with ZnO gas sensors, demonstrated by diffuse reflection infrared Fourier transform (DRIFT) spectroscopy. Pt-loaded ZnO nanocrystals (NCs) of 13~22 nm are synthesized using the hot soap method. The synthesized powder is deposited on an alumina substrate by screen-printing to form a particulate gas sensing film. The 0.1 wt% Pt-loaded ZnO NC sensor shows the highest sensor response to acetone and ethanol at 350 °C, while the responses to CO and H₂ are small and exhibit good selectivity to VOCs. The gas sensing mechanism of ethanol with Pt-ZnO NCs was studied by in situ DRIFT spectroscopy combined with online FT-IR gas analysis. The results show that ethanol reacts with small Pt-loaded ZnO to produce intermediate species such as acetaldehyde, acetate, and carbonate, which generates a high sensor response to ethanol in air.

Solid-state synthesis of CdFe2O4 binary catalyst for potential application in renewable hydrogen fuel generation

Clean energy is highly needed at this time when the energy requirements are rapidly increasing. The observed increasing energy requirement are largely due to continued industrialization and global population explosion. The current means of energy source is not sustainable because of several reasons, most importantly, environmental pollution and human health deterioration due to burning of fossil fuels. Therefore, this study develops a new catalyst for hydrogen and oxygen evolution by water splitting as a potential energy vector. The binary metal oxide catalyst CdFe₂O₄ was synthesized by the solventless solid-mechanical alloying method. The as-prepared catalyst was well characterized by several methods including field emission scanning electron microscopy (FESEM), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), Fourier Transform infrared red spectroscopy (FTIR), energy dispersive X-ray spectroscopy (XEDS). The as-prepared catalyst, CdFe₂O₄ was successfully applied for water electrolysis at a moderate overpotential (470 mV). Specifically, the onset potential for the oxygen and hydrogen evolution reactions (OER and HER) were 1.6 V_/RHE and 0.2 V_/RHE respectively (vs. the reversible hydrogen electrode). The electrode potential required to reach 10 mA/cm^-2 for OER (in alkaline medium) and HER (in acidic medium) was 1.70 V_/RHE (corresponding to overpotential η = 0.47 and − 0.30 V_/RHE (η = − 0.30 V) respectively. Similarly, the developed OER and HER catalyst displayed high current and potential stability for a period of 12 h. This approach is seen as the right track of making water electrolysis for hydrogen energy feasible through provision of low-energy requirement for the electrolytic process. Therefore, CdFe₂O₄ is a potential water splitting catalyst for hydrogen evolution which is a clean fuel and an antidote for world dependence on fossil fuel for energy generation.

AgVI and Ag/ZnOVI nanostructures from Vateria indica (L.) exert antioxidant, antidiabetic, anti-inflammatory and cytotoxic efficacy on triple negative breast cancer cells in vitro

Human triple-negative breast cancer (TNBC) being an aggressive cancer type accounts for about 15-20 % of global breast cancer cases. In the present study, the cytotoxicity of pure silver (AgVI) and silver/zinc oxide (Ag/ZnOVI) nanostructures was evaluated against the TNBC cells. The nanostructures synthesized from a green route using Vateria indica (L.) fruit extract were characterized to scrutinize their formation, crystal phase, size, shape, and surface properties via FTIR, PXRD, FE-SEM coupled with EDS spectroscopy, and BET analysis. The results of the studies have unveiled the formation of 26.43 nm and 20.97 nm sized AgVI and Ag/ZnOVI nanostructures in their purest form. The in-vitro anticancer study performed on human TNBC cells [MDA-MB468] revealed the enhancement in the antiproliferative potentiality of bimetallic Ag/ZnOVI nanostructures from 66.99 ± 0.13 to 79.73 ± 0.23 in comparison to pure AgVI nanostructures. In addition to this, the greenish yellow-fluorescence observed in the TNBC nuclei during the AO-EB staining study manifested the early apoptosis. Furthermore, the anti-inflammatory and cytotoxicity study performed on the human RBC and normal NIH3T3 murine fibroblasts cells proved the biocompatibility and non-toxic nature of the synthesized nanostructures with membrane stabilization percentage up to 94.5 ± 0.001. Additionally, the antioxidant and antidiabetic studies carried out have corroborated the radical scavenging and α-amylase inhibition capability up to 85.87 ± 0.001 and 89.60 ± 0.002 % respectively. Thus the overall results of the study substantiate the superlative antioxidant, antidiabetic, and antiproliferative property of green synthesized AgVI and Ag/ZnOVI nanostructures with excellent biocompatibility.

Graphene Loading with Polypyrrole Nanoparticles for Trace-Level Detection of Ammonia at Room Temperature

The outstanding versatility of graphene for surface functionalization has been exploited by its decoration with synthesized polypyrrole (PPy) nanoparticles (NPs). A green, facile, and easily scalable for mass production nanocomposite development was proposed, and the resulting PPy@Graphene was implemented in chemoresistive gas sensors able to detect trace levels of ammonia (NH₃) under room-temperature conditions. Gas exposure for 5 min revealed that the presence of nanoparticles decorating graphene entail greater sensitivity (13-fold) in comparison to the bare graphene performance. Noteworthy, excellent repeatability (0.7% of relative error) and a low limit of detection of 491 ppb were obtained, together with excellent long-term stability. Besides, an extensive material characterization was conducted, and vibration bands obtained via Raman spectroscopy confirmed the formation of PPy NPs, while X-ray spectroscopy (XPS) revealed the relative abundance of the different species, as polarons and bipolarons. Additionally, XPS analyses were conducted before and after NH₃ exposure to assess the PPy aging and the changes induced in their physicochemical and electronic properties. Specifically, the gas sensor was tested during a 5-month period, demonstrating significant stability over time, since just a slight decrease (11%) in the responses was registered. In summary, the present work reports for the first time the use of PPy NPs decorating graphene for gas-sensing purposes, revealing promising properties for the development of unattended gas-sensing networks for monitoring air quality.

MOF-Derived Porous Hollow Co3O4@ZnO Cages for High-Performance MEMS Trimethylamine Sensors

Trimethylamine (TMA) sensors based on metal oxide semiconductors (MOS) have drawn great attention for real-time seafood quality evaluation. However, poor selectivity and baseline drift limit the practical applications of MOS TMA sensors. Engineering core@shell heterojunction structures with accumulation and depletion layers formed at the interface is regarded as an appealing way for enhanced gas sensing performances. Herein, we design porous hollow Co₃O₄@ZnO cages via a facile ZIF-67@ZIF-8-derived approach for TMA sensors. These sensors demonstrate great TMA resistive sensing performance (linear response at moderate TMA concentrations (<33 ppm)), and a high sensitivity of ∼41 is observed when exposed to 33 ppm TMA, with a response/recovery time of only 3/2 s. This superior performance benefits from the Co₃O₄@ZnO porous hollow structure with maximum heterojunctions and high surface area. Furthermore, great capacitive TMA sensing with linear sensitivity over the full testing concentration range (0.33-66 ppm) and better baseline stability were investigated. A possible capacitive sensing mechanism of TMA polarization was proposed. For practical usage, a portable sensing prototype based on the Co₃O₄@ZnO sensor was fabricated, and its satisfactory sensing behavior further confirms the potential for real-time TMA detection.

Functionalization of Zinc Oxide Nanoflowers with Palladium Nanoparticles via Microwave Absorption for Room Temperature-Operating Hydrogen Gas Sensors in the ppb Level

Microwave-assisted functionalization of zinc oxide nanoflowers (ZnO NFs) with palladium nanoparticles (Pd NPs) is demonstrated to realize high-performance chemiresistive-type hydrogen (H₂) gas sensors operating at room temperature (RT). The developed gas sensors exhibit a high response of up to 70% at 50 ppm and a theoretical detection limit of 10 ppb. The formation of ZnO NFs with an enhanced specific surface area and their functionalization with Pd NPs are investigated through various characterizations. Furthermore, the optimization of microwave absorption upon the structural incorporations between nanostructures (NF-NPs) is investigated for solution-based functionalization at low temperatures (below 120 °C) for short process times (within 1 min), compared to the conventional thermal annealing at 250 °C for 1 h. Highly sensitive and selective ZnO-based gas sensors enabling the detection of H₂ gas molecules at 300 ppb concentration at RT exhibit a short response/recovery time of below 3 min and a good selectivity toward different gases including nitric oxide, carbon monoxide, and oxygen. The successful functionalization of nanostructured metal oxide semiconductors (MOSs) with metal NPs via effective and practical microwave absorption enhances the potential on highly sensitive and selective chemiresistive-type MOS-based gas sensors operating at RT without additional heaters or photogenerators.

Growth Mechanisms of ZnO Micro-Nanomorphologies and Their Role in Enhancing Gas Sensing Properties

Zinc oxide (ZnO) is one of the main functional materials used to realize chemiresistive gas sensors. In addition, ZnO can be grown through many different methods obtaining the widest family of unique morphologies. However, the relationship between the ZnO morphologies and their gas sensing properties needs more detailed investigations, also with the aim to improve the sensor performances. In this work, seven nanoforms (such as leaves, bisphenoids, flowers, needles, etc.) were prepared through simple wet chemical synthesis. Morphological and structural characterizations were performed to figure out their growth mechanisms. Then, the obtained powders were deposited through screen-printing technique to realize thick film gas sensors. The gas sensing behavior was tested toward some traditional target gases and some volatile organic compounds (acetone, acetaldehyde, etc.) and compared with ZnO morphologies. Results showed a direct correlation between the sensors responses and the powders features (morphology and size), which depend on the specific synthesis process. The sensors can be divided in two behavioral classes, following the two main morphology kinds: aggregates of nanocrystals (leaves and bisphenoids), exhibiting best performances versus all tested gases and monocrystal based (stars, needle, long needles, flowers, and prisms).

Hollow Au/Polypyrrole Capsules to Form Porous and Neural Network-Like Nanofibrous Film for Wearable, Super-Rapid, and Ultrasensitive NH3 Sensor at Room Temperature

Wearable conducting polymer-based NH₃ sensors are highly desirable in real-time environmental monitoring and human health protection but still a challenge for their relatively long response/recovery time and moderate sensitivity at room temperature. Herein, we present an effective route to fulfill this challenge by constructing porous and neural network-like Au/polypyrrole (Au/PPy) electrospun nanofibrous film with hollow capsular units for NH₃ sensor. Taking the unique architecture and synergistic effect between Au and PPy, our sensor exhibits not only super-rapid response/recovery time (both ∼7 s), faster than all reported sensors, but also stable and ultrahigh sensitivity (response reaches ∼2.3 for 1 ppm NH₃) at room temperature even during repeated deformation. Furthermore, good selectivity has been also achieved. These outstanding properties make our sensor hold great potential in real-time NH₃-related disease diagnosis and environmental monitoring at room temperature.

Fabrication of Silicon Dioxide by Photo-Chemical Vapor Deposition to Decrease Detector Current of ZnO Ultraviolet Photodetectors

Zinc oxide (ZnO)-based semiconductor is a promising application for ultraviolet photodetectors (UV PDs). The performance of ZnO UV PDs can be improved in two orientations: by reduction of the dark current and by increasing the photocurrent. In the study, we used two processes to prepare ZnO UV PDs: photochemical vapor deposition to fabricate silicon dioxide as an insulator layer and a radio frequency sputter system to prepare the ZnO film as an active layer. The results show that the silicon dioxide layer can reduce the dark current. Moreover, a large photo-dark current ratio of the metal-insulator-semiconductor (MIS) structured PD is 200 times than the metal-semiconductor-metal (MSM) structured PD. When the silicon dioxide thickness is 98 nm, we can significantly enhance the rejection ratio. The silicon dioxide layer can reduce the noise effect and enhance the device detectivity. These results indicate that the insertion of a silicon dioxide layer into ZnO PDs is potentially useful for practical applications.

Highly Deformable Fabric Gas Sensors Integrating Multidimensional Functional Nanostructures

Highly strain-endurable gas sensors were implemented on fabric, which was taken from a real T-shirt, employing a sequential coating method. Multidimensional, functional nanostructures such as reduced graphene oxide, ZnO nanorods, palladium nanoparticles, and silver nanowires were integrated for their realization. It was revealed that the fabric gas sensors could detect both oxidizing and reducing gases at room temperature with differing signs and magnitudes of responses. Noticeably, the fabric gas sensors could normally work even under large strains up to 100%, which represents the highest strain tolerance in the gas sensor field. Furthermore, the fabric gas sensors turned out to bear harsh bending and twisting stresses. It was also demonstrated that the sequential coating method is an effective and facile way to control the size of the fabric gas sensor.

Facile synthesis of Pd@graphene nanocomposites with enhanced catalytic activity towards Suzuki coupling reaction

A facile and chemical specific method to synthesize highly reduced graphene oxide (HRG) and Pd (HRG@Pd) nanocomposite is presented. The HRG surfaces are tailored with amine groups using 1-aminopyrene (1-AP) as functionalizing molecules. The aromatic rings of 1-AP sit on the basal planes of HRG through π-π interactions, leaving amino groups outwards (similar like self-assembled monolayer on 2D substrates). The amino groups provide the chemically specific binding sites to the Pd nucleation which subsequently grow into nanoparticles. HRG@Pd nanocomposite demonstrated both uniform distribution of Pd nanoparticles on HRG surface as well as excellent physical stability and dispersibility. The surface functionalization was confirmed using, ultraviolet-visible (UV-Vis), Fourier transform infra-red and Raman spectroscopy. The size and distribution of Pd nanoparticles on the HRG and crystallinity were confirmed using high-resolution transmission electron microscopy and powder X-ray diffraction and X-ray photoelectron spectroscopy. The catalytic efficiency of highly reduced graphene oxide-pyrene-palladium nanocomposite (HRG-Py-Pd) is tested towards the Suzuki coupling reactions of various aryl halides. The kinetics of the catalytic reaction (Suzuki coupling) using HRG-Py-Pd nanocomposite was monitored using gas chromatography (GC).

Nanostructured ZnO/Ag Film Prepared by Magnetron Sputtering Method for Fast Response of Ammonia Gas Detection

Possessing a large surface-to-volume ratio is significant to the sensitive gas detection of semiconductor nanostructures. Here, we propose a fast-response ammonia gas sensor based on porous nanostructured zinc oxide (ZnO) film, which is fabricated through physical vapor deposition and subsequent thermal annealing. In general, an extremely thin silver (Ag) layer (1, 3, 5 nm) and a 100 nm ZnO film are sequentially deposited on the SiO₂/Si substrate by a magnetron sputtering method. The porous nanostructure of ZnO film is formed after thermal annealing contributed by the diffusion of Ag among ZnO crystal grains and the expansion of the ZnO film. Different thicknesses of the Ag layer help the formation of different sizes and quantities of hollows uniformly distributed in the ZnO film, which is demonstrated to hold superior gas sensing abilities than the compact ZnO film. The responses of the different porous ZnO films were also investigated in the ammonia concentration range of 10 to 300 ppm. Experimental results demonstrate that the ZnO/Ag(3 nm) sensor possesses a good electrical resistance variation of 85.74% after exposing the sample to 300 ppm ammonia gas for 310 s. Interestingly, a fast response of 61.18% in 60 s for 300 ppm ammonia gas has been achieved from the ZnO/Ag(5 nm) sensor, which costs only 6 s for the response increase to 10%. Therefore, this controllable, porous, nanostructured ZnO film maintaining a sensitive gas response, fabricated by the physical deposition approach, will be of great interest to the gas-sensing community.

Ultrathin agaric-like ZnO with Pd dopant for aniline sensor and DFT investigation

Aniline detection is of great importance in many industries, but most of the aniline sensors suffers from tedious and time consuming process. Herein, we present an efficient aniline sensor based on Pd decorated ZnO nanomaterials. Ultrathin ZnO nanosheets were synthesized by a facile one-step hydrothermal method. The nanosheets were corrugated into a unique agaric morphology, endorsing the nanomaterials with high surface area that is ideal for gas sensing applications. The obtained ZnO nanosheets were then uniformly decorated with uniform Pd nanoparticles (Pd NPs) around 5 nm in diameter. Gas sensing experiment on the ZnO decorate with different amount of Pd nanoparticles were systematically evaluated. The sample decorated with 0.3 % Pd NPs (Pd-ZnO-0.3) exhibited the highest sensitivity to aniline, which is about two orders higher than that of the pure ZnO nanosheet. The gas sensor based on Pd-ZnO-0.3 has a detection limit to aniline down to 0.5 ppm, with very short response and recovery times of 29 s and 23 s, respectively to 100 ppm aniline. First-principles DFT study was employed to provide the sensing mechanism. The improved sensing performance could be attributed to the increasing adsorbed oxygen and tunable band alignment for Pd-ZnO materials. This work provides new insights to the design strategy of Pd-decorated ZnO nanomaterials for high performance gas sensors.

Ultrafast Detection of Low Acetone Concentration Displayed by Au-Loaded LaFeO3 Nanobelts owing to Synergetic Effects of Porous 1D Morphology and Catalytic Activity of Au Nanoparticles

Herein, we report on one-dimensional porous Au-modified LaFeO₃ nanobelts (NBs) with high surface area, which were synthesized through the electrospinning method. The incorporation and coverage of Au nanoparticles (NPs) on the surface of the LaFeO₃ NBs was achieved by adjusting the HAuCl amount in the precursor solution. Successful incorporation of Au NPs was examined by X-ray diffraction, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy. The gas-sensing performance of both the pure and Au/LaFeO₃ NB-based sensors was tested toward 2.5-40 ppm of acetone at working temperatures in the range from room temperature to 180 °C. The gas-sensing findings revealed that Au/LaFeO₃ NB-based sensor with the Au concentration of 0.3 wt % displayed improved response of 125-40 ppm of acetone and rapid response and recovery times of 26 and 20 s, respectively, at an optimal working temperature of 100 °C. Furthermore, all sensors demonstrated an excellent response toward acetone and remarkable selectivity against NO₂, NH₃, CH₄, and CO. Hence, the Au/LaFeO₃-NB-based sensor is a promising candidate for sensitive, ultrafast, and selective acetone detections at low concentrations. The gas-sensing mechanism of the Au/LaFeO₃ sensors is explained in consideration of the catalytic activity of the Au NPs, which served as direct adsorption sites for oxygen and acetone.

Catalytic Reduction of Hexavalent Chromium Using Iron/Palladium Bimetallic Nanoparticle-Assembled Filter Paper

Iron/palladium bimetallic nanoparticles (Fe/Pd NPs) are important catalytic materials for the field of environmental remediation. In the present study, filter paper was employed as a substrate for the assembly of Fe/Pd NPs and further applied for the catalytic conversion of hexavalent chromium Cr(VI) toward trivalent Cr(III). First, a filter paper with negative charge was assembled with a layer of positively charged polyethylenimine (PEI) through electrostatic interaction; then, the abundant amine groups of PEI were used to complex Fe(III) ions, followed by reduction via sodium borohydride to produce an Fe NP-assembled filter paper. Thereafter, the Fe/Pd NPs were produced by the reduction of PdCl42- through Fe NPs. The prepared filter paper assembled with Fe/Pd NPs with a mean diameter of 10.1 nm was characterized by various techniques. The Fe/Pd NP-assembled filter paper possesses powerful catalytic activity and can be used to transform Cr(VI) to Cr(III). With its low cost, high sustainability, and convenient industrialization potential, the developed approach may be extended to produce other bimetallic NP-immobilized filter paper for different environmental remediation applications.