Thorn-like TiO2 nanoarrays with broad spectrum antimicrobial activity through physical puncture and photocatalytic action

Photocatalytic Antimicrobials: Principles, Design Strategies, and Applications

Nowadays, the increasing emergence of antibiotic-resistant pathogenic microorganisms requires the search for alternative methods that do not cause drug resistance. Phototherapy strategies (PTs) based on the photoresponsive materials have become a new trend in the inactivation of pathogenic microorganisms due to their spatiotemporal controllability and negligible side effects. Among those phototherapy strategies, photocatalytic antimicrobial therapy (PCAT) has emerged as an effective and promising antimicrobial strategy in recent years. In the process of photocatalytic treatment, photocatalytic materials are excited by different wavelengths of lights to produce reactive oxygen species (ROS) or other toxic species for the killing of various pathogenic microbes, such as bacteria, viruses, fungi, parasites, and algae. Therefore, this review timely summarizes the latest progress in the PCAT field, with emphasis on the development of various photocatalytic antimicrobials (PCAMs), the underlying antimicrobial mechanisms, the design strategies, and the multiple practical antimicrobial applications in local infections therapy, personal protective equipment, water purification, antimicrobial coatings, wound dressings, food safety, antibacterial textiles, and air purification. Meanwhile, we also present the challenges and perspectives of widespread practical implementation of PCAT as antimicrobial therapeutics. We hope that as a result of this review, PCAT will flourish and become an effective weapon against pathogenic microorganisms and antibiotic resistance.

Quantifiable Relationship Between Antibacterial Efficacy and Electro-Mechanical Intervention on Nanowire Arrays

Physical disruption is an important antibacterial means as it is lethal to bacteria without spurring antimicrobial resistance. However, it is very challenging to establish a quantifiable relationship between antibacterial efficacy and physical interactions such as mechanical and electrical forces. Herein, titanium nitride (TN) nanowires with adjustable orientations and capacitances are prepared to exert gradient electro-mechanical forces on bacteria. While vertical nanowires show the strongest mechanical force resulting in an antibacterial efficiency of 0.62 log reduction (vs 0.22 for tiled and 0.36 for inclined nanowires, respectively), the addition of electrical charges maximizes the electro-mechanical interactions and elevates the antibacterial efficacy to more than 3 log reduction. Biophysical and biochemical analyses indicate that electrostatic attraction by electrical charge narrows the interface. The electro-mechanical intervention more easily stiffens and rips the bacteria membrane, disturbing the electron balance and generating intracellular oxidative stress. The antibacterial ability is maintained in vivo and bacteria-challenged rats are protected from serious infection. The physical bacteria-killing process demonstrated here can be controlled by adjusting the electro-mechanical interactions. Overall, these results revealed important principles for rationally designing high-performance antibacterial interfaces for clinical applications.

Superparamagnetic Nickel Nanocluster-Embedded MoS2 Nanosheets for Gram-Selective Bacterial Adhesion and Antibacterial Activity

Ever increasing infectious diseases caused by pathogenic bacteria are creating one of the greatest health problems. The extensive use of numerous antibiotics and antimicrobial agents has prompted the growth of multidrug-resistant bacterial strains. The ancient biomedical application of metals and the recent advancement in the field of nanotechnology have encouraged us to explore the antimicrobial activity of nanomaterials. Herein, we have synthesized a magnetically separable superparamagnetic nickel nanocluster-loaded two-dimensional molybdenum disulfide nanocomposite (Ni@2D-MoS₂). It can selectively bind with Gram-positive bacteria such as methicillin-resistant Staphylococcus aureus (MRSA) and Enterococcus faecalis over Gram-negative bacteria such as Escherichia coli and Pseudomonas aeruginosa. After the functionalization of Ni@2D-MoS₂ with a positively charged ligand, it showed an excellent Gram-selective antibacterial activity toward MRSA and E. faecalis. Furthermore, the superparamagnetic property of the synthesized material can be used for the simultaneous removal and killing of the microbes and recycled for further use. This study demonstrates strategies to develop hybrid antimicrobial nanomaterial systems for selective antibacterial activity with recyclability.

Antifungal activity of TiO2/AgBr nanocomposites on some phytopathogenic fungi

TiO2/AgBr composites were synthesized by a simple ultrasonic strategy. Various instruments such as SEM, EDX, XRD, and FT-IR were exploited to investigate their characteristics. Antifungal activities of the as-obtained samples were assessed through the inactivation of Fusarium graminearum in the spore suspension method and mycelial growth inhibition of F. graminearum, Botrytis cinerea, and Sclerotinia sclerotiorum in the microdilution method. The results represented that the TiO2/AgBr samples possess higher antifungal activities on F. graminearum spores than the pure TiO2. The sample with 20 wt% silver bromide represented the highest inhibitory effect on the growth of F. graminearum so that all fungal spores were degraded in the initial times of the treatment process. The inactivation of fungal spores after 60 min was 35.2%, 97.8%, 98.9%, and 98.7%, in respect, for 5, 10, 20, and 30 weight percent of AgBr in the binary nanocomposites, while the inhibition rate was 13.4% for the pure TiO2. With increasing ultrasound irradiation time for more than 30 min, the inactivation rate constant decreased. It was also found that the antifungal activity of the nanocomposites without calcination was higher than those of the calcined materials. Considering the antifungal potential against phytopathogenic fungi and advantages such as simple synthesis and eco-friendly nature, it seems that TiO2/AgBr nanocomposites can be used instead of synthetic chemicals after additional field investigations and mass production.

Antipathogenic properties and applications of low-dimensional materials

A major health concern of the 21st century is the rise of multi-drug resistant pathogenic microbial species. Recent technological advancements have led to considerable opportunities for low-dimensional materials (LDMs) as potential next-generation antimicrobials. LDMs have demonstrated antimicrobial behaviour towards a variety of pathogenic bacterial and fungal cells, due to their unique physicochemical properties. This review provides a critical assessment of current LDMs that have exhibited antimicrobial behaviour and their mechanism of action. Future design considerations and constraints in deploying LDMs for antimicrobial applications are discussed. It is envisioned that this review will guide future design parameters for LDM-based antimicrobial applications.

Antibacterial Activity of Positively and Negatively Charged Hematite (α-Fe2O3) Nanoparticles to Escherichia coli, Staphylococcus aureus and Vibrio fischeri

In the current study, the antibacterial activity of positively and negatively charged spherical hematite (α-Fe2O3) nanoparticles (NPs) with primary size of 45 and 70 nm was evaluated against clinically relevant bacteria Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) as well as against naturally bioluminescent bacteria Vibrio fischeri (an ecotoxicological model organism). α-Fe2O3 NPs were synthesized using a simple green hydrothermal method and the surface charge was altered via citrate coating. To minimize the interference of testing environment with NP's physic-chemical properties, E. coli and S. aureus were exposed to NPs in deionized water for 30 min and 24 h, covering concentrations from 1 to 1000 mg/L. The growth inhibition was evaluated following the postexposure colony-forming ability of bacteria on toxicant-free agar plates. The positively charged α-Fe2O3 at concentrations from 100 mg/L upwards showed inhibitory activity towards E. coli already after 30 min of contact. Extending the exposure to 24 h caused total inhibition of growth at 100 mg/L. Bactericidal activity of positively charged hematite NPs against S. aureus was not observed up to 1000 mg/L. Differently from positively charged hematite NPs, negatively charged citrate-coated α-Fe2O3 NPs did not exhibit any antibacterial activity against E. coli and S. aureus even at 1000 mg/L. Confocal laser scanning microscopy and flow cytometer analysis showed that bacteria were more tightly associated with positively charged α-Fe2O3 NPs than with negatively charged citrate-coated α-Fe2O3 NPs. Moreover, the observed associations were more evident in the case of E. coli than S. aureus, being coherent with the toxicity results. Vibrio fischeri bioluminescence inhibition assays (exposure medium 2% NaCl) and colony forming ability on agar plates showed no (eco)toxicity of α-Fe2O3 (EC50 and MBC > 1000 mg/L).

Effects of Structural Factors of Hydrated TiO2 on Rutile TiO2 Pigment Preparation via Short Sulfate Process

The structural factors such as crystal structure, particle size distribution and impurity content of hydrated TiO₂ had great effects on the structures and pigment properties of the rutile TiO₂. The rutile TiO₂ white pigment was prepared via the Short Sulfate Process from low concentration industrial TiOSO₄ solution. In order to produce rutile TiO₂ pigment with good structures and excellent pigment properties, the crystal size of the hydrated TiO₂ should be controlled less than 8.9 nm and as close as possible to 7.9 nm, which could effectively promote the phase transformation and crystal growth of the rutile TiO₂. The appropriate particle size distribution of hydrated TiO₂ had obvious effects on obtaining rutile TiO₂ with narrower particle size distribution and near 0.20 µm. It was best to adjust the hydrolysis conditions to reduce the specific surface area of the hydrated TiO₂ so as to reduce the iron ion impurity adsorption.

Designing Photocatalytic Nanostructured Antibacterial Surfaces: Why Is Black Silica Better than Black Silicon?

The efficiency of photocatalytic antibacterial surfaces is limited by the absorption of light in it. Light absorption in photocatalytic surfaces can be enhanced by structuring it, leading to increased generation of reactive oxygen species (ROS) and hence improved bactericidal efficacy. A second, more passive methodology to kill bacteria involves the use of sharp nanostructures that mechanically disrupt the bacterial membrane. Recently, these two mechanisms were combined to form photoactive nanostructured surfaces with better antibacterial efficacy. However, the design rules for fabricating the optimal photoactive nanostructured surfaces have not been articulated. Here we show that for optimal performance it is very important to account for optoelectrical properties and geometry of the photoactive coating and the underlying pillar. We show that TiO₂-coated nanopillars arrays made of SiO₂, a material with a low extinction coefficient, have 73% higher bactericidal efficacies than those made of Si, a material with a high extinction coefficient. The finite element method (FEM) shows that despite the higher absorption in higher aspect ratio nanopillars, their performance is not always better. The concentration of bulk ROS saturates around 5 μm. For taller pillars, the improvement in surface ROS concentration is minimal due to the diffusion bottleneck. Simulation results corroborate with the experimentally observed methylene blue degradation and bacterial count measurements and provide an explanation of the observed phenomenon. The guidelines for designing these optically activated photocatalyst nanopillars can be extended to other photocatalytic material after adjusting for their respective properties.

Added value recyclability of glass fiber waste as photo-oxidation catalyst for toxic cytostatic micropollutants

There is an increased interest in recycling valuable waste materials for usage in procedures with high added values. Silica microparticles are involved in the processes of catalysis, separation, immobilization of complexants, biologically active compounds, and different nanospecies, responding to restrictive requirements for selectivity of various chemical and biochemical processes. This paper presents the surface modification of accessible and dimensionally controlled recycled silica microfiber with titanium dioxide. Strong base species in organic solvents: methoxide, ethoxide, propoxide, and potassium butoxide in corresponding alcohol, activated the glass microfibres with 12-13 µm diameter. In the photo-oxidation process of a toxic micro-pollutant, cyclophosphamide, the new composite material successfully proved photocatalytic effectiveness. The present work fulfills simultaneously two specific objectives related to the efforts directed towards a sustainable environment and circular economy: recycling of optical glass microfibers resulted as waste from the industry, and their usage for the photo-oxidation of highly toxic emerging micro-pollutants.