NanoThermoMechanical AND and OR Logic Gates

Far-Field Radiative Thermal Rectification Based on Asymmetric Emissivity

This experimental study investigates thermal rectification via asymmetric far-field thermal radiation on a fused silica slab. An asymmetrical distribution of surface emissivity is created over the device by partially covering the fused silica with a 100 nm thick aluminum film. The slab is subjected to a thermal bias, and when this bias is reversed, a small temperature difference is observed between the different configurations. This temperature difference arises from the difference in emissivity between the aluminum layer and fused silica, resulting in the transfer of thermal energy to the surrounding environment through radiation. Experimental findings are supported by finite element simulations, which not only confirm the measured values but also provide valuable insights into the rectification efficiency of the system. The rectification efficiency is found to be approximately 50% at room temperature for a thermal bias of 140 K. Simulations, which are performed by considering different environmental conditions experienced by the radiation and free convection processes, provide further insight into the underlying thermal rectification mechanism. These simulations consider an environmental temperature of 4 K for thermal radiation and an ambient temperature of 294 K for free convection and reveal an enhanced rectification effect with a rectification efficiency up to 600% when a thermal bias of 195 K is applied. This result emphasizes the significance of considering both convection and radiation in the thermal management and rectification of asymmetric systems. The outcomes of this study further our understanding of the thermal rectification phenomenon. They also show the importance of system asymmetry, emissivity disparities, environmental conditions, and the interplay between convection and radiation. Furthermore, the findings have implications for heat transfer and rectification in asymmetric systems, offering potential applications in areas such as energy harvesting, thermal management, and heat transfer optimization in electronic devices.

Modulating photothermocapillary interactions for logic operations at the air-water interface

We demonstrate a system for performing logical operations (OR, AND, and NOT gates) at the air-water interface based on Marangoni optical trapping and repulsion between photothermal particles. We identify a critical separation distance at which the trapped particle assemblies become unstable, providing insight into the potential for scaling to larger arrays of logic elements.

Stochastic dynamics of a nonlinear thermal circuit with bistability

Stochastic dynamics of a nonlinear thermal circuit is studied. Due to the existence of negative differential thermal resistance, there exist two stable steady states that satisfy both the continuity and stability conditions. The dynamics of such a system is governed by a stochastic equation which describes originally an overdamped Brownian particle that undergoes a double-well potential. Correspondingly, the finite time temperature distribution takes a double-peak profile and each peak is approximately Gaussian. Owing to the thermal fluctuation, the system is able to jump occasionally from one stable steady state to the other. The probability density distribution of the lifetime τ for each stable steady state follows a power-law decay τ^{-3/2} in the short-τ regime and an exponential decay e^{-τ/τ_{0}} in the long-τ regime. All these observations can be well explained analytically.

A three-terminal magnetic thermal transistor

Three-terminal thermal analogies to electrical transistors have been proposed for use in thermal amplification, thermal switching, or thermal logic, but have not yet been demonstrated experimentally. Here, we design and fabricate a three-terminal magnetic thermal transistor in which the gate temperature controls the source-drain heat flow by toggling the source-drain thermal conductance from ON to OFF. The centimeter-scale thermal transistor uses gate-temperature dependent magnetic forces to actuate motion of a thermally conducting shuttle, providing thermal contact between source and drain in the ON state while breaking contact in the OFF state. We measure source-drain thermal switch ratios of 109 ± 44 in high vacuum with gate switching temperatures near 25 °C. Thermal measurements show that small heat flows into the gate can be used to drive larger heat flows from source to drain, and that the switching is reversible over >150 cycles. Proof-of-concept thermal circuit demonstrations show that magnetic thermal transistors can enable passive or active heat flow routing or can be combined to create Boolean thermal logic gates. This work will allow thermal researchers to explore the behavior of nonlinear thermal circuits using three-terminal transistors and will motivate further research developing thermal transistors for advanced thermal control.

Effects of Dexmedetomidine on Postoperative Pain and Recovery Time in Obese Patients

Objective

The objective of this study is to investigate the effect of dexmedetomidine on postoperative pain and recovery time in obese patients.

Methods

A total of 100 obese patients with body mass index (BMI) ≥ 30 kg/m² who underwent laparoscopic sleeve gastrectomy under general anesthesia in our hospital from January 2019 to December 2021 were included and assigned into DEX group (dexmedetomidine group) and NS group (normal saline group). The bariatric surgery patients who were given normal saline pump were the NS group (n = 50), and the bariatric surgery patients who were given the dexmedetomidine pump were the DEX group (n = 50). The patients in the DEX group were given continuous intravenous infusion of dexmedetomidine before, during, and after induction of anesthesia at a dose of 0.4 μg. kg-1. h-1, 0.4 μg·kg-1. h-1, 0.2 μg·kg-1. h-1, respectively. The NS group was infused with the same volume of normal saline for the same time. The two groups of patients were treated with the same anesthesia induction and maintenance program. By comparing the operation, anesthesia, postoperative extubation, and recovery time of the two groups of patients, the effect of dexmedetomidine on the postoperative recovery time of obese patients was analyzed. Visual analogue scale (VAS) and adverse reactions were compared to analyze the effect of dexmedetomidine on postoperative pain in obese patients.

Results

The operation, anesthesia, postoperative extubation, and recovery time of the DEX group were significantly lower than those of the NS group, whereas the VAS and adverse reactions were significantly lower than those in the NS group (P < 0.05).

Conclusion

An appropriate dose of dexmedetomidine in bariatric surgery for morbidly obese patients can effectively shorten the recovery time and extubation time of patients, reduce postoperative pain and the incidence of adverse reactions, and is worthy of clinical application. Dexmedetomidine 2 μg/kg has promising anesthesia benefits in bariatric surgery of obese patients, can provide favorable analgesia and quality of recovery, help reduce the degree of stress response of patients, and does not increase the risk of adverse events. However, this study has certain limitations, so physicians should tailor the dosage according to the patient's physical condition in clinical practice.

Thermal Rectification and Thermal Logic Gates in Graded Alloy Semiconductors

Classical thermal rectification arises from the contact between two dissimilar bulk materials, each with a thermal conductivity (k) with a different temperature dependence. Here, we study thermal rectification in a Si(1−x)Gex alloy with a spatial dependence on the atomic composition. Rectification factors (R = kmax/kmin) of up to 3.41 were found. We also demonstrate the suitability of such an alloy for logic gates using a thermal AND gate as an example by controlling the thermal conductivity profile via the alloy composition. This system is readily extendable to other alloys, since it only depends on the effective thermal conductivity. These thermal devices are inherently advantageous alternatives to their electric counterparts, as they may be able to take advantage of otherwise undesired waste heat in the surroundings. Furthermore, the demonstration of logic operations is a step towards thermal computation.

Carbon Dots-Based Logic Gates

Carbon dots (CDs)-based logic gates are smart nanoprobes that can respond to various analytes such as metal cations, anions, amino acids, pesticides, antioxidants, etc. Most of these logic gates are based on fluorescence techniques because they are inexpensive, give an instant response, and highly sensitive. Computations based on molecular logic can lead to advancement in modern science. This review focuses on different logic functions based on the sensing abilities of CDs and their synthesis. We also discuss the sensing mechanism of these logic gates and bring different types of possible logic operations. This review envisions that CDs-based logic gates have a promising future in computing nanodevices. In addition, we cover the advancement in CDs-based logic gates with the focus of understanding the fundamentals of how CDs have the potential for performing various logic functions depending upon their different categories.