Straightforward synthesis of Sulfur/N,S-codoped carbon cathodes for Lithium-Sulfur batteries

Synergistic Electrocatalysis and Spatial Nanoconfinement to Accelerate Sulfur Conversion Kinetics in Aqueous Zn-S Battery

Aqueous zinc batteries based on the conversion-type sulfur cathodes are promising in energy storage system due to the high theoretical energy density, low cost, and good safety. However, the multi-electron solid-state intermediate conversion reaction of sulfur cathodes generally possess sluggish kinetics, which leads to lower discharge voltage and inefficient sulfur utilization, thus suppressing the practical energy density. Herein, sulfur nanoparticles derived from metal-organic frameworks confined in situ within electrospun fibers derived sulfur and nitrogen co-doped carbon nanofibers (S@S,N-CNF) composite, which possesses yolk-shell S@C nanostructure, is fabricated through successive sulfidation, pyrolysis, and sulfide oxidation processes, and served as a high-performance cathode material for Zn-S battery. The S and N dopants on carbon can collectively catalyse sulfur reduction reaction (SRR) by lowering energy barrier and accelerating kinetics to increase discharge voltage and specific capacity. Meanwhile, the yolk-shell S@C structure with spatially confined S nanoparticle yolks is beneficial to improve charge transfer and lower activation energy, thus further expediting SRR kinetics. Furthermore, extensive density functional theory (DFT) calculations reveal that S and N dual-doping can thermodynamically and dynamically reduce the energy barrier of rate-determining step (i.e., the transformation of *ZnS4 into *ZnS2) for the overall SRR, thereby significantly accelerating SRR kinetics.

Synergistic Effect of Lactam and Pyridine Nitrogen on Polysulfide Chemisorption and Electrocatalysis in Lithium Sulfur Batteries

Sulfur undergoes various changes, including the formation of negative charge-bearing lithium polysulfides during the operation of Li-S batteries. Dissolution of some of the polysulfides in battery electrolytes is one of the reasons for the poor performance of Li-S batteries. The charge injection into the sulfur and polysulfides from the electrode is also a problem. To address these issues, a small-molecule additive, 3,6-di(pyridin-4-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione, was designed and synthesized with carbonyl oxygen atoms and two types of nitrogen. The pyridinic nitrogen increases the electronegativity of the carbonyl oxygen atoms. The pyridinic nitrogen, carbonyl oxygen, and lactam nitrogen provide multiple binding sites concurrently to the polysulfides, which increases the binding efficiency between the additive and polysulfides. A control molecule without the pyridine moiety displayed decreased binding to lithium polysulfides. Furthermore, the band edges of lithium polysulfide and 3,6-di(pyridin-4-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione are commensurate for efficient charge transfer between them, leading to the efficient electrocatalysis of lithium polysulfides. The cyclic voltammogram of the Li-S battery fabricated with 3,6-di(pyridin-4-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione exhibited sharp and well-defined peaks, confirming the formation of Li2Sy (where y varies between one and eight) from S8. These Li-S batteries showed a specific capacity of 950 mA h/g at 0.5 C, with a capacity retention of 70% at the 300th cycle. The pyridine-free control molecule, 3,6-diphenyl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione, showed relatively poor performance in a Li-S battery.

Iodine-Doped Hollow Carbon Nanocages without Templates Strategy for Boosting Zinc-Ion Storage by Nucleophilicity

Zn-ion hybrid supercapacitors (ZHCs) combining merits of battery-type and capacitive electrodes are considered to be a prospective candidate in energy storage systems. Tailor-made carbon cathodes with high zincophilicity and abundant physi/chemisorption sites are critical but it remains a great challenge to achieve both features by a sustainable means. Herein, a hydrogen-bonding interaction-guided self-assembly strategy is presented to prepare iodine-doped carbon nanocages without templates for boosting zinc-ion storage by nucleophilicity. The biomass ellagic acid contains extensional hydroxy and acyloxy groups with electron-donating ability, which interact with melamine and ammonium iodide to form organic supermolecules. The organic supermolecules further self-assemble into a nanocage-like structure with cavities under hydrothermal processes via hydrogen-bonding and π-π stacking. The carbon nanocages as ZHCs cathodes enable the high approachability of zincophilic sites and low ion migration resistance resulting from the interconnected conductive network and nanoscale architecture. The experimental analyses and theoretical simulations reveal the pivotal role of iodine dopants. The I5-/I3- doping anions in carbon cathodes have a nucleophilicity to preferentially adsorb the Zn2+ cation by the formation of C+-I5--Zn2+ and C+-I3--Zn2+. Of these, the C+-I3- shows stronger bonding with Zn2+ than C+-I5-. As a result, the iodine-doped carbon nanocages produced via this template-free strategy deliver a high capacity of 134.2 mAh/g at 1 A/g and a maximum energy and power density of 114.1 Wh/kg and 42.5 kW/kg.

Sulfur functionalized biocarbon sorbents for low-concentration mercury isolation

Sulfur functionalized biocarbons were prepared from naturally abundant lignin alkali with sodium thiocyanate as an activation agent and a sulfur source. The resultant biocarbon sorbents showed a high mercury isolation ability from aqueous solutions, where high surface area and doping of sulfur significantly aid the uptake of mercury, i.e., 0.05 g of biocarbon sorbent removed 99% of mercury from 250 mL of simulated wastewater with an initial concentration of mercury of 10 mg L-1.

Cathode materials for lithium-sulfur battery: a review

Lithium-sulfur batteries (LSBs) are considered to be one of the most promising candidates for becoming the post-lithium-ion battery technology, which would require a high level of energy density across a variety of applications. An increasing amount of research has been conducted on LSBs over the past decade to develop fundamental understanding, modelling, and application-based control. In this study, the advantages and disadvantages of LSB technology are discussed from a fundamental perspective. Then, the focus shifts to intermediate lithium polysulfide adsorption capacity and the challenges involved in improving LSBs by using alternative materials besides carbon for cathode construction. Attempted alternative materials include metal oxides, metal carbides, metal nitrides, MXenes, graphene, quantum dots, and metal organic frameworks. One critical issue is that polar material should be more favorable than non-polar carbonaceous materials in the aspect of intermediate lithium polysulfide species adsorption and suppress shuttle effect. It will be also presented that by preparing cathode with suitable materials and morphological structure, high-performance LSB can be obtained.

Graphical abstract

Hierarchical Porous Heteroatoms-Co-Doped Activated Carbon Synthesized from Coconut Shell and Its Application for Supercapacitors

Coconut husk biomass waste was used as the carbon precursor to develop a simple and economical process for the preparation of hierarchical porous activated carbon, and the electrochemical properties of the electrode material were explored. The important process variables of carbonization, the weight ratios of the coconut shell/KOH, the amount of source dopant, and the carbonization temperature were investigated in order to reveal the influence of the as-obtained microporous/mesoporous/macroporous hierarchical porous carbon materials on the powder properties. Using a BET specific surface area analyzer, Raman analysis, XPS and SEM, surface morphology, pore distribution and specific surface area of the hierarchical porous carbon materials are discussed. The results show that the as-prepared N-, S- and O-heteroatom-co-doped activated carbon electrode was manufactured at 700 °C for electrochemical characteristics. The electrochemical behavior has the characteristics of pseudo-capacitance, and could reach 186 F g^-1 at 1 A g^-1 when measured by the galvanostatic charge-discharge (GCD) test. After 7000 cycles of the charge-discharge test, the initial capacitance value retention rate was 95.6%. It is predicted that capacitor materials made when using coconut shell as a carbon source will have better energy storage performance than traditional carbon supercapacitors.

Carbon-Nanotube-Encapsulated-Sulfur Cathodes for Lithium-Sulfur Batteries: Integrated Computational Design and Experimental Validation

To mitigate lithium-polysulfides (Li-PSs) shuttle in lithium-sulfur batteries (LiSBs), a unique carbon-nanotube-encapsulated-sulfur (S@CNT) cathode material with optimum open-ring sizes (ORSs) on the CNT walls were designed using an integrated computational approach followed by experimental validation. By calculating the transport barrier of Li⁺ ion through ORSs on the CNT walls and comparing the molecular size of solvents and Li-PSs with ORSs, optimum open-rings with 16-30 surrounding carbon atoms were predicted to selectively allow transportation of Li⁺ ion and evaporated sulfur while blocking both Li-PS and solvent molecules. A CNT oxidation process was proposed and simulated to generate these ORSs, and the results indicated that the optimum ORSs can be achieved by narrowly controlling the oxidation parameters. Subsequently, S@CNT cathodes were experimentally synthesized, confirming that optimum ORSs were generated in CNT oxidized at 475 K and exhibited more stable cycling behavior.

Biomass-Derived Carbon/Sulfur Composite Cathodes with Multiwalled Carbon Nanotube Coatings for Li-S Batteries

Lithium sulfur (Li-S) batteries stand out among many new batteries for their high energy density. However, the intermediate charge–discharge product dissolves easily into the electrolyte to produce a shuttle effect, which is a key factor limiting the rapid development of Li-S batteries. Among the various materials used to solve the challenges related to pure sulfur cathodes, biomass derived carbon materials are getting wider research attention. In this work, we report on the fabrication of cathode materials for Li-S batteries based on composites of sulfur and biomass-derived porous ramie carbon (RC), which are coated with multiwalled carbon nanotubes (MWCNTs). RC can not only adsorb polysulfide in its pores, but also provide conductive channels. At the same time, the MWCNTs coating further reduces the dissolution of polysulfides into the electrolyte and weakens the shuttle effect. The sulfur loading rate of RC is 66.3 wt.%. As a result, the initial discharge capacity of the battery is 1325.6 mAh·g−1 at 0.1 C long cycle, and it can still maintain 812.5 mAh·g−1 after 500 cycles. This work proposes an effective double protection strategy for the development of advanced Li-S batteries.

Co-oxidative removal of arsenite and tetracycline based on a heterogeneous Fenton-like reaction using iron nanoparticles-impregnated biochar

A highly efficient, eco-friendly and relatively low-cost catalyst is necessary to tackle bottlenecks in the treatment of industrial wastewater laden with heavy metals and antibiotic such as livestock farm and biogas liquids. This study investigated co-oxidative removal of arsenite (As(III)) and tetracycline (TC) by iron nanoparticles (Fe NP)-impregnated carbons based on heterogeneous Fenton-like reactions. The composites included Fe NP@biochar (BC), Fe NP@hydrochar (HC), and Fe NP@HC-derived pyrolysis char (HDPC). The functions of N and S atoms and the loading mass of the Fe NP in the Fe NP@BC in heterogeneous Fenton-like reactions were studied. To sustain its cost-effectiveness, the spent Fe NP@BC was regenerated using NaOH. Among the composites, the Fe NP@BC achieved an almost complete removal of As(III) and TC under optimized conditions (1.0 g/L of dose; 10 mM H₂O₂; pH 6; 4 h of reaction; As(III): 50 μM; TC: 50 μM). The co-oxidative removal of As(III) and TC by the Fe NP@ BC was controlled by the synergistic interactions between the Fe NPs and the active N and S sites of the BC for generating reactive oxygen species (ROS). After four consecutive regeneration cycles, about 61 and 95% of As(III) and TC removal were attained. This implies that the spent carbocatalyst still has reasonable catalytic activities for reuse. Overall, this suggests that adding technological values to unused biochar as a carbocatalyst like Fe NP@BC was promising for co-oxidative removal of As(III) and TC from contaminated water.

Sulfur-Doped Carbons from Durian Peels, Their Surface Characteristics, and Electrochemical Behaviors

Durian peels are an agricultural waste in Asian countries, including Thailand, Indonesia, and Malaysia, which can be used as a precursor for the production of activated carbon. The objective of this work is to produce activated carbon from durian peels by chemical activation using sodium sulfite (Na2SO3) as an activating and sulfur-doping agent. The process parameter investigated in this study was the activation temperature (500-900 °C) at a fixed impregnation ratio (durian to activating agent of 1:1, by weight). Specific surface areas and pore structures were determined by nitrogen adsorption and desorption measurements, and elemental compositions were characterized by CHNSO analysis. The chemical structure and surface functionality were examined by X-ray photoelectron spectroscopy. The electrochemical behavior of the obtained activated carbon was characterized in 6 M KOH using a three-electrode configuration. It was found that the sulfur content decreases with activation temperature. In contrast, the specific surface area of the activated carbon increases with activation temperature. However, the sample activated at 900 °C with the highest specific surface area (1499 m2 g-1) has a lower specific capacitance (166 F g-1) than the one activated at 700 °C (183 F g-1). This could be due to the presence of a pseudocapacitance caused by the organic sulfur functional groups such as thiophene, sulfone, and sulfoxide, which can trigger a surface redox reaction, leading to a higher capacitance.

More Sustainable Chemical Activation Strategies for the Production of Porous Carbons

The preparation of porous carbons attracts a great deal of attention given the importance of these materials in many emerging applications, such as hydrogen storage, CO₂ capture, and energy storage in supercapacitors and batteries. In particular, porous carbons produced by applying chemical activation methods are preferred because of the high pore development achieved. However, given the environmental risks associated with conventional activating agents such as KOH, the development of greener chemical activation methodologies is an important objective. This Review summarizes recent progress in the production of porous carbons by using more sustainable strategies based on chemical activation. The use of less-corrosive chemical agents as an alternative to KOH is thoroughly reviewed. In addition, progress achieved to date by using emerging self-activation methodologies applied to organic salts and biomass products is also discussed.