Wideband tunable microwave signal generation in a silicon-micro-ring-based optoelectronic oscillator

Thermo-elastic gigahertz-frequency oscillator through surface acoustic wave-silicon photonics

Opto-electronic oscillators are sources of microwave-frequency tones that may reach very low noise levels. Much effort is being dedicated to the realization of oscillators based on photonic integrated devices. In this work, we propose and demonstrate a thermo-elastic opto-electronic oscillator at 2.213 GHz frequency based on a standard silicon-photonic integrated circuit. A microwave-frequency electrical signal modulates an optical pump wave carrier. The modulated waveform launches surface acoustic waves in a silicon-on-insulator substrate, through absorption in a metallic grating and thermo-elastic actuation. The waveform is reconverted to the optical domain through photoelastic modulation of an optical probe wave carrier in a standard racetrack resonator waveguide. Both the thermo-elastic actuation and the photoelastic modulation are radio-frequency selective. The output probe wave is detected, and the receiver voltage is amplified and fed back to modulate the optical pump input. Sufficient gain drives the loop into oscillations. The oscillator does not involve piezoelectricity and can be realized on any substrate. Long acoustic delays may be implemented in compact devices. The frequency of operation is scalable to tens of GHz. The principle may be useful in integrated microwave-photonic signal processing and in the elastic analysis of surfaces and thin layers.

Narrow linewidth parity-time symmetric Brillouin fiber laser based on a dual-polarization cavity with a single micro-ring resonator

A narrow linewidth parity-time (PT) symmetric Brillouin fiber laser (BFL) based on dual-polarization cavity (DPC) with single micro-ring resonator (MRR) is proposed and experimentally investigated. A 10 km single-mode fiber provides SBS gain, while a DPC consisting of optical coupler, polarization beam combiner and a MRR, is used to achieve PT symmetry. Due to the reciprocity of light propagation in the MRR, the PT symmetry BFL based on DPC implements two identical feedback loops that are connected to one another, one with a Brillouin gain coefficient and the other with a loss coefficient of the same magnitude, to break a PT symmetric. Compared with existing BFL studies, this design does not call for frequency matching of compound cavities structures or without ultra-narrow bandwidth bandpass filters. In the experiment, the 3-dB linewidth of PT symmetry BFL based on DPC with single MRR is 11.95 Hz with the threshold input power of 2.5 mW, according to the measured linewidth of 239 Hz at the -20 dB power point. And a 40 dB maximum mode suppression ratio are measured. Furthermore, the PT symmetry BFL's wavelength is tuned between 1549.60 and 1550.73 nm. This design with single longitudinal mode output can be applied to high coherent communication systems.

Manipulating the polarization dynamics in a >10-GHz Er3+/Yb3+ fiber Fabry-Pérot laser

In this work, we report on the vector and scalar soliton dynamics that result from inevitable fiber birefringence in an 8-mm Er³⁺/Yb³⁺ fiber based Fabry-Férot (FP) laser that has a free spectral range of up to 12.5 GHz. The generation of polarization-evolving vector solitons can largely degrade the performance of application systems, and the underlying mechanisms and manipulation technologies are yet to be explored. To realize the transition from vector to scalar (linearly polarized) state, we here incorporate the polarization selection effect (PSE) in the simulation model and the numerical results verify that only a small amount of PSE is sufficient for manipulating the soliton dynamics. It also reveals that, prominent polarization-dependent intensity discrimination can be acquired via geometry-induced oblique incidence to the Bragg mirror of the semiconductor saturable absorber mirror (SESAM), and we obtain switchable operating states by tilting the SESAM in the experiments. These efforts create a feasible method to manipulate high-repetition-rate pulse and may shed light on understanding the dissipative soliton dynamics in ultrafast fiber FP lasers.

Ultralow-linewidth ring laser using hybrid integration and generic foundry platforms

Two photonic integrated circuits (PICs) are coupled to form a hybridly integrated semiconductor ring laser in the telecom C band with an intrinsic linewidth of (158±21) Hz. This is, to the best of our knowledge, the first time an InP active-passive platform is used in conjunction with an integrated low-loss resonator to obtain a narrow-linewidth laser implemented using generic foundry platforms. The presented results pave the way for a hybrid integrated platform for microwave photonics (MWP), as the demonstrated device includes multiple active-passive components, and its narrow optical linewidth can potentially be translated to a narrow-linewidth microwave signal. Furthermore, as the laser is based on hybrid integration of two PICs from generic foundry platforms, there is a path to reproducible and low-cost devices.

Opto-Electronic Oscillators for Micro- and Millimeter Wave Signal Generation

High-frequency signal oscillators are devices needed for a variety of scientific disciplines. One of their fundamental requirements is low phase noise in the micro- and millimeter wave ranges. The opto-electronic oscillator (OEO) is a good candidate for this, as it is capable of generating a signal with very low phase noise in the micro- and millimeter wave ranges. The OEO consists of an optical resonator with electrical feedback components. The optical components form a delay line, which has the advantage that the phase noise is independent of the oscillator’s frequency. Furthermore, by using a long delay line, the phase noise characteristics of the oscillator are improved. This makes it possible to widen the range of possible OEO applications. In this paper we have reviewed the state of the art for OEOs and micro- and millimeter wave signal generation as well as new developments for OEOs and the use of OEOs in a variety of applications. In addition, a possible implementation of a centralized OEO signal distribution as a local oscillator for a 5G radio access network (RAN) is demonstrated.

Dispersive-wave induced noise limits in miniature soliton microwave sources

Compact, low-noise microwave sources are required throughout a wide range of application areas including frequency metrology, wireless-communications and airborne radar systems. And the photonic generation of microwaves using soliton microcombs offers a path towards integrated, low noise microwave signal sources. In these devices, a so called quiet-point of operation has been shown to reduce microwave frequency noise. Such operation decouples pump frequency noise from the soliton's motion by balancing the Raman self-frequency shift with dispersive-wave recoil. Here, we explore the limit of this noise suppression approach and reveal a fundamental noise mechanism associated with fluctuations of the dispersive wave frequency. At the same time, pump noise reduction by as much as 36 dB is demonstrated. This fundamental noise mechanism is expected to impact microwave noise (and pulse timing jitter) whenever solitons radiate into dispersive waves belonging to different spatial mode families.

Parity-time symmetric frequency-tunable optoelectronic oscillator based on a Si3N4 microdisk resonator

The optoelectronic oscillator (OEO) generates low-phase noise and high-frequency microwave signals thanks to a high Q-factor cavity with long and low-loss fiber delay. Traditionally, for the desired mode selection from the ultradense cavity modes, a narrowband electrical filter is needed, whose frequency tuning is very limited. On the other hand, for a tunable OEO offered by a microwave photonic filter (MPF), a paradox existed between the large number of cavity modes and the wide MPF bandwidth. Here, we achieve a tunable OEO using the mode-selection mechanism of parity-time symmetry, which overcomes the paradox. A high Q-factor silicon nitride microdisk resonator (Si₃N₄ MDR) is introduced to achieve frequency filtering and tuning. Moreover, the experimental results reveal that the tunable OEO generates a signal range from 3 GHz to 20 GHz with a phase noise about -120dBc/Hz at a 10 kHz offset frequency.