Determination of mesopores in the wood cell wall at dry and wet state

Nanocrystalline iron hydroxide lignocellulose filters for arsenate remediation

Harmful levels of environmental contaminants, such as arsenic (As), persist readily in the environment, threatening safe drinking water supplies in many parts of the world. In this paper, we present a straightforward and cost-effective filtration technology for the removal of arsenate from potable water. Biocomposite filters comprised of nanocrystalline iron oxides or oxyhydroxides mineralized within lignocellulose scaffolds constitute a promising low cost, low-tech avenue for the removal of these contaminants. Two types of iron oxide mineral phases, 2-line ferrihydrite (Fh) and magnetite (Mt), were synthesized within highly porous balsa wood using an environmentally benign modification process and studied in view of their effective removal of As from contaminated water. The mineral deposition pattern, minerology, as well as crystallinity, were assessed using scanning electron microscopy, transmission electron microscopy, micro-computed X-ray tomography, confocal Raman microscopy, infrared spectroscopy, and X-ray powder diffraction. Our results indicate a preferential distribution of the Fh mineral phase within the micro-porous cell wall and radial parenchyma cells of rays, while Mt is formed primarily at the cell wall/lumen interface of vessels and fibers. Water samples of known As concentrations were subjected to composite filters in batch incubation and gravity-driven flow-through adsorption tests. Eluents were analyzed using microwave plasma optical emission spectroscopy (MP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). By subjecting the filters to a flow of contaminated water, the time for As uptake was reduced to minutes rather than hours, while immobilizing the same amount of As. The retention of As within the composite filter was further confirmed through energy-dispersive X-ray mappings. Apart from addressing dangerously high levels of arsenate in potable water, these versatile iron oxide lignocellulosic filters harbor tremendous potential for addressing current and emerging environmental contaminants that are known to adsorb on iron oxide mineral phases, such as phosphate, polycyclic aromatic hydrocarbons or heavy metals.

Ectopic callose deposition into woody biomass modulates the nano-architecture of macrofibrils

Plant biomass plays an increasingly important role in the circular bioeconomy, replacing non-renewable fossil resources. Genetic engineering of this lignocellulosic biomass could benefit biorefinery transformation chains by lowering economic and technological barriers to industrial processing. However, previous efforts have mostly targeted the major constituents of woody biomass: cellulose, hemicellulose and lignin. Here we report the engineering of wood structure through the introduction of callose, a polysaccharide novel to most secondary cell walls. Our multiscale analysis of genetically engineered poplar trees shows that callose deposition modulates cell wall porosity, water and lignin contents and increases the lignin-cellulose distance, ultimately resulting in substantially decreased biomass recalcitrance. We provide a model of the wood cell wall nano-architecture engineered to accommodate the hydrated callose inclusions. Ectopic polymer introduction into biomass manifests in new physico-chemical properties and offers new avenues when considering lignocellulose engineering.

Effect of enzymatic treatment on Eucalyptus globulus vessels passivation

Hardwood vessel elements generate problems in industrial uncoated wood-free printing paper operation, causing vessel picking and ink refusal. These problems are mitigated using mechanical refining at the cost of paper quality. Vessel enzymatic passivation, altering its adhesion to the fiber network and reducing its hydrophobicity is a way of improving paper quality. The object of this paper is to study how the enzymatic treatment by xylanase and by an enzymatic cocktail containing cellulases and laccases affect elemental chlorine free bleached Eucalyptus globulus vessel and fiber porosities, bulk, and surface chemical compositions. Thermoporosimetry revealed the vessel structure to be more porous, surface analysis showed its lower O/C ratio and bulk chemistry analysis its higher hemicellulose content. Enzymes had different effects on porosity, bulk and surface composition of fibers and vessels, affecting vessel adhesion and hydrophobicity. Vessel picking count decreased 76% for papers containing vessels treated with xylanase and 94% for the papers with vessels treated with the enzymatic cocktail. Fiber sheet samples had lower water contact angle (54.1º) than vessels rich sheets (63.7º), that reduced with xylanase (62.1º) and cocktail (58.4º). It is proposed that differences in vessel and fiber porosity structures affect the enzymatic attacks, eventually causing vessel passivation.

Viscoelastic and Thermal Properties of Styrene Modified Fir Wood

The modification of wood and its surface is one of the challenges that is being perfected with the aim of transitioning to sustainable management. This study investigated the dynamic mechanical and thermal behaviour of unmodified and styrene modified fir wood (Abies alba Mill.). Styrene monomer was chosen and impregnated into the porous structure of fir wood by reversible addition-fragmentation chain transfer (RAFT) polymerisation. Attenuated total reflection Fourier-transform infrared spectroscopy (FTIR-ATR), dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA) were employed to characterise the chemical structure, viscoelastic properties, and thermal stability of unmodified and modified (surface-modified) wood. All tests have to be regarded as being preliminary due to the small number of specimens. Fourier transform infrared analysis showed evidence of the phenyl group from styrene at 700 cm⁻¹. DMA results showed that the modified wood caused an increase in the glass transition temperature relative to the unmodified wood. In addition, modification with styrene improves thermal stability, as revealed by thermogravimetric analysis (TGA).

How much water can wood cell walls hold? A triangulation approach to determine the maximum cell wall moisture content

Wood is a porous, hygroscopic material with engineering properties that depend significantly on the amount of water (moisture) in the material. Water in wood can be present in both cell walls and the porous void-structure of the material, but it is only water in cell walls that affects the engineering properties. An important characteristic of wood is therefore the capacity for water of its solid cell walls, i.e. the maximum cell wall moisture content. However, this quantity is not straight-forward to determine experimentally, and the measured value may depend on the experimental technique used. In this study, we used a triangulation approach to determine the maximum cell wall moisture content by using three experimental techniques based on different measurement principles: low-field nuclear magnetic resonance (LFNMR) relaxometry, differential scanning calorimetry (DSC), and the solute exclusion technique (SET). The LFNMR data were furthermore analysed by two varieties of exponential decay analysis. These techniques were used to determine the maximum cell wall moisture contents of nine different wood species, covering a wide range of densities. The results from statistical analysis showed that LFNMR yielded lower cell wall moisture contents than DSC and SET, which were fairly similar. Both of the latter methods include factors that could either under-estimate or over-estimate the measured cell wall moisture content. Because of this and the fact that the DSC and SET methods are based on different measurement principles, it is likely that they provide realistic values of the cell wall moisture content in the water-saturated state.