1
|
Rizzuti A, Dilonardo E, Cozzolino G, Matera F, Carbone A, Musio B, Mastrorilli P. Optimized Sulfonated Poly(Ether Ether Ketone) Membranes for In-House Produced Small-Sized Vanadium Redox Flow Battery Set-Up. MEMBRANES 2024; 14:176. [PMID: 39195428 DOI: 10.3390/membranes14080176] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2024] [Revised: 08/07/2024] [Accepted: 08/12/2024] [Indexed: 08/29/2024]
Abstract
The ionic exchange membranes represent a core component of redox flow batteries. Their features strongly affect the performance, durability, cost, and efficiency of these energy systems. Herein, the operating conditions of a lab-scale single-cell vanadium flow battery (VRFB) were optimized in terms of membrane physicochemical features and electrolyte composition, as a way to translate such conditions into a large-scale five-cell VRFB stack system. The effects of the sulfonation degree (SD) and the presence of a filler on the performances of sulfonated poly(ether ether ketone) (SPEEK) ion-selective membranes were investigated, using the commercial perfluorosulfonic-acid Nafion 115 membrane as a reference. Furthermore, the effect of a chloride-based electrolyte was evaluated by comparing it to the commonly used standard sulfuric acid electrolyte. Among the investigated membranes, the readily available SPEEK50-0 (SD = 50%; filler = 0%) resulted in it being permeable and selective to vanadium. Improved coulombic efficiency (93.4%) compared to that of Nafion 115 (88.9%) was achieved when SPEEK50-0, in combination with an optimized chloride-based electrolyte, was employed in a single-cell VRFB at a current density of 20 mA·cm-2. The optimized conditions were successfully applied for the construction of a five-cell VRFB stack system, exhibiting a satisfactory coulombic efficiency of 94.5%.
Collapse
Affiliation(s)
- Antonino Rizzuti
- Department of Civil, Environmental, Land, Building and Chemical Engineering (DICATECh), Politecnico di Bari, Via E. Orabona 4, 70125 Bari, BA, Italy
| | - Elena Dilonardo
- Department of Civil, Environmental, Land, Building and Chemical Engineering (DICATECh), Politecnico di Bari, Via E. Orabona 4, 70125 Bari, BA, Italy
- Institute of Nanotechnology, CNR-NANOTEC, Via G. Amendola, 122, 70125 Bari, BA, Italy
| | | | - Fabio Matera
- Institute of Microelectronics and Microsystems, CNR-IMM, Catania HQ, VIII Strada n. 5, 95100 Catania, CT, Italy
| | - Alessandra Carbone
- Institute for Advanced Energy Technologies, CNR-ITAE, Salita S. Lucia Sopra Contesse 5, 98126 Messina, ME, Italy
| | - Biagia Musio
- Department of Civil, Environmental, Land, Building and Chemical Engineering (DICATECh), Politecnico di Bari, Via E. Orabona 4, 70125 Bari, BA, Italy
| | - Piero Mastrorilli
- Department of Civil, Environmental, Land, Building and Chemical Engineering (DICATECh), Politecnico di Bari, Via E. Orabona 4, 70125 Bari, BA, Italy
| |
Collapse
|
2
|
Hossain MH, Abdullah N, Tan KH, Saidur R, Mohd Radzi MA, Shafie S. Evolution of Vanadium Redox Flow Battery in Electrode. CHEM REC 2024; 24:e202300092. [PMID: 37144668 DOI: 10.1002/tcr.202300092] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/13/2023] [Revised: 04/19/2023] [Indexed: 05/06/2023]
Abstract
The vanadium redox flow battery (VRFB) is a highly regarded technology for large-scale energy storage due to its outstanding features, such as scalability, efficiency, long lifespan, and site independence. This paper provides a comprehensive analysis of its performance in carbon-based electrodes, along with a comprehensive review of the system's principles and mechanisms. It discusses potential applications, recent industrial involvement, and economic factors associated with VRFB technology. The study also covers the latest advancements in VRFB electrodes, including electrode surface modification and electrocatalyst materials, and highlights their effects on the VRFB system's performance. Additionally, the potential of two-dimensional material MXene to enhance electrode performance is evaluated, and the author concludes that MXenes offer significant advantages for use in high-power VRFB at a low cost. Finally, the paper reviews the challenges and future development of VRFB technology.
Collapse
Affiliation(s)
- Md Hasnat Hossain
- Department of Electrical and Electronic Engineering, Universiti Putra Malaysia, 43400, UPM Serdang, Selangor, Malaysia
| | - Norulsamani Abdullah
- Research Center for Nano-Materials and Energy Technology (RCNMET), School of Engineering and Technology, Sunway University, Bandar Sunway, Petaling Jaya, 47500, Selangor Darul Ehsan, Malaysia
- Sunway Materials Smart Science & Engineering (SMS2E) Cluster, Sunway University, Petaling Jaya, Selangor, 47500, Malaysia
| | - Kim Han Tan
- Research Center for Nano-Materials and Energy Technology (RCNMET), School of Engineering and Technology, Sunway University, Bandar Sunway, Petaling Jaya, 47500, Selangor Darul Ehsan, Malaysia
| | - R Saidur
- Research Center for Nano-Materials and Energy Technology (RCNMET), School of Engineering and Technology, Sunway University, Bandar Sunway, Petaling Jaya, 47500, Selangor Darul Ehsan, Malaysia
- Sunway Materials Smart Science & Engineering (SMS2E) Cluster, Sunway University, Petaling Jaya, Selangor, 47500, Malaysia
- School of Engineering, Lancaster University, Lancaster, LA1 4YW, UK
| | - Mohd Amran Mohd Radzi
- Department of Electrical and Electronic Engineering, Universiti Putra Malaysia, 43400, UPM Serdang, Selangor, Malaysia
| | - Suhaidi Shafie
- Department of Electrical and Electronic Engineering, Universiti Putra Malaysia, 43400, UPM Serdang, Selangor, Malaysia
| |
Collapse
|
3
|
Hatfield KO, Putnam ST, Rodríguez-López J. Inducing SERS activity at graphitic carbon using graphene-covered Ag nanoparticle substrates: Spectroelectrochemical analysis of a redox-active adsorbed anthraquinone. J Chem Phys 2023; 158:014701. [PMID: 36610978 DOI: 10.1063/5.0130876] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022] Open
Abstract
Graphitic carbon electrodes are central to many electrochemical energy storage and conversion technologies. Probing the behavior of molecular species at the electrochemical interfaces they form is paramount to understanding redox reaction mechanisms. Combining surface-enhanced Raman scattering (SERS) with electrochemical methods offers a powerful way to explore such mechanisms, but carbon itself is not a SERS activating substrate. Here, we report on a hybrid substrate consisting of single- or few-layer graphene sheets deposited over immobilized silver nanoparticles, which allows for simultaneous SERS and electrochemical investigation. To demonstrate the viability of our substrate, we adsorbed anthraquinone-2,6-disulfonate to graphene and studied its redox response simultaneously using SERS and cyclic voltammetry in acidic solutions. We identified spectral changes consistent with the reversible redox of the quinone/hydroquinone pair. The SERS intensities on bare silver and hybrid substrates were of the same order of magnitude, while no discernible signals were observed over bare graphene, confirming the SERS effect on adsorbed molecules. This work provides new prospects for exploring and understanding electrochemical processes in situ at graphitic carbon electrodes.
Collapse
Affiliation(s)
- Kendrich O Hatfield
- Department of Chemistry, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, USA
| | - Seth T Putnam
- Department of Chemistry, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, USA
| | - Joaquín Rodríguez-López
- Department of Chemistry, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, USA
| |
Collapse
|
5
|
Bellani S, Najafi L, Prato M, Oropesa-Nuñez R, Martín-García B, Gagliani L, Mantero E, Marasco L, Bianca G, Zappia MI, Demirci C, Olivotto S, Mariucci G, Pellegrini V, Schiavetti M, Bonaccorso F. Graphene-Based Electrodes in a Vanadium Redox Flow Battery Produced by Rapid Low-Pressure Combined Gas Plasma Treatments. CHEMISTRY OF MATERIALS : A PUBLICATION OF THE AMERICAN CHEMICAL SOCIETY 2021; 33:4106-4121. [PMID: 34267420 PMCID: PMC8274967 DOI: 10.1021/acs.chemmater.1c00763] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/03/2021] [Revised: 04/26/2021] [Indexed: 05/09/2023]
Abstract
The development of high-power density vanadium redox flow batteries (VRFBs) with high energy efficiencies (EEs) is crucial for the widespread dissemination of this energy storage technology. In this work, we report the production of novel hierarchical carbonaceous nanomaterials for VRFB electrodes with high catalytic activity toward the vanadium redox reactions (VO2+/VO2 + and V2+/V3+). The electrode materials are produced through a rapid (minute timescale) low-pressure combined gas plasma treatment of graphite felts (GFs) in an inductively coupled radio frequency reactor. By systematically studying the effects of either pure gases (O2 and N2) or their combination at different gas plasma pressures, the electrodes are optimized to reduce their kinetic polarization for the VRFB redox reactions. To further enhance the catalytic surface area of the electrodes, single-/few-layer graphene, produced by highly scalable wet-jet milling exfoliation of graphite, is incorporated into the GFs through an infiltration method in the presence of a polymeric binder. Depending on the thickness of the proton-exchange membrane (Nafion 115 or Nafion XL), our optimized VRFB configurations can efficiently operate within a wide range of charge/discharge current densities, exhibiting energy efficiencies up to 93.9%, 90.8%, 88.3%, 85.6%, 77.6%, and 69.5% at 25, 50, 75, 100, 200, and 300 mA cm-2, respectively. Our technology is cost-competitive when compared to commercial ones (additional electrode costs < 100 € m-2) and shows EEs rivalling the record-high values reported for efficient systems to date. Our work remarks on the importance to study modified plasma conditions or plasma methods alternative to those reported previously (e.g., atmospheric plasmas) to improve further the electrode performances of the current VRFB systems.
Collapse
Affiliation(s)
- Sebastiano Bellani
- BeDimensional
S.p.a., Via Lungotorrente
secca 3D, 16163 Genova, Italy
- Graphene
Labs, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova, Italy
- (S.B.)
| | - Leyla Najafi
- BeDimensional
S.p.a., Via Lungotorrente
secca 3D, 16163 Genova, Italy
- Graphene
Labs, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova, Italy
| | - Mirko Prato
- Materials
Characterization Facility, Istituto Italiano
di Tecnologia, via Morego 30, 16163 Genova, Italy
| | - Reinier Oropesa-Nuñez
- BeDimensional
S.p.a., Via Lungotorrente
secca 3D, 16163 Genova, Italy
- Department
of Materials Science and Engineering, Uppsala
University, Box 534, 751
03 Uppsala, Sweden
| | - Beatriz Martín-García
- Graphene
Labs, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova, Italy
- CIC nanoGUNE, 20018 Donostia-San Sebastian, Basque, Spain
| | - Luca Gagliani
- Graphene
Labs, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova, Italy
| | - Elisa Mantero
- BeDimensional
S.p.a., Via Lungotorrente
secca 3D, 16163 Genova, Italy
- Graphene
Labs, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova, Italy
| | - Luigi Marasco
- Graphene
Labs, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova, Italy
| | - Gabriele Bianca
- Graphene
Labs, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova, Italy
- Dipartimento
di Chimica e Chimica Industriale, Università
degli Studi di Genova, via Dodecaneso 31, 16146 Genoa, Italy
| | - Marilena I. Zappia
- BeDimensional
S.p.a., Via Lungotorrente
secca 3D, 16163 Genova, Italy
- Department
of Physics, University of Calabria, via P. Bucci cubo 31/C, 87036 Rende, Cosenza, Italy
| | - Cansunur Demirci
- Dipartimento
di Chimica e Chimica Industriale, Università
degli Studi di Genova, via Dodecaneso 31, 16146 Genoa, Italy
- NanoChemistry, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova, Italy
| | - Silvia Olivotto
- Wind
Technology Innovation, Enel Global Power
Generation, https://www.enel.com/
| | - Giacomo Mariucci
- Storage
and New Business Design, Engineering & Construction, Enel Green Power S.p.A., https://www.enel.com/
| | - Vittorio Pellegrini
- BeDimensional
S.p.a., Via Lungotorrente
secca 3D, 16163 Genova, Italy
- Graphene
Labs, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova, Italy
| | - Massimo Schiavetti
- Thermal &
Industry 4.0 Innovation, Enel Global Power
Generation, https://www.enel.com/
| | - Francesco Bonaccorso
- BeDimensional
S.p.a., Via Lungotorrente
secca 3D, 16163 Genova, Italy
- Graphene
Labs, Istituto Italiano di Tecnologia, via Morego 30, 16163 Genova, Italy
- (F.B.)
| |
Collapse
|