Effects of short-time exposure of surface pre-reacted glass-ionomer eluate on dental microcosm biofilm

Antimicrobial effects of surface pre-reacted glass-ionomer (S-PRG) eluate against oral microcosm biofilm

This study investigated the antimicrobial activity of surface pre-reacted glass ionomer eluate (S-PRG) against oral microcosm biofilms collected from the oral cavity of patients. Dental biofilm samples were collected from three volunteers to form microcosm biofilms in vitro. Initially, screening tests were carried out to determine the biofilm treatment conditions with S-PRG eluate. The effects of a daily treatment for 5 min using three microcosm biofilms from different patients was then evaluated. For this, biofilms were formed on tooth enamel specimens for 120 h. Biofilms treated with 100% S-PRG for 5 min per day for 5 days showed a reduction in the number of total microorganisms, streptococci and mutans streptococci. SEM images confirmed a reduction in the biofilm after treatment. Furthermore, S-PRG also reduced lactic acid production. It was concluded that S-PRG eluate reduced the microbial load and lactic acid production in oral microcosm biofilms, reinforcing its promising use as a mouthwash agent.

Salivary fluoride concentrations following toothbrushing with experimental toothpaste containing surface pre-reacted glass-ionomer (S-PRG) filler

BACKGROUND

Single-blind 9 case comparative studies were conducted to evaluate salivary fluoride concentrations following toothbrushing using experimental toothpaste containing surface pre-reacted glass-ionomer (S-PRG) fillers. Preliminary tests were conducted in order to determine the volume of usage as well as the concentrations (wt %) of S-PRG filler. Based on the results given these experiments, we compared the salivary fluoride concentrations following toothbrushing with 0.5 g of 4 different types of toothpastes: 5 wt % S-PRG filler, 1400 ppm F AmF (amine fluoride), 1500 ppm F NaF (sodium fluoride), and MFP (monofluorophosphate) containing toothpaste.

METHODS

Of the 12 participants, 7 participated in the preliminary study and 8 in the main study. All participants brushed their teeth using the scrubbing method for 2 min. At first, 1.0 and 0.5 g of 20 wt % S-PRG filler toothpastes were used to compare, then followed by 0.5 g of 0 (control), 1, and 5 wt % S-PRG toothpastes, respectively. The participants spat out once and rinsed with 15 mL of distilled water for 5 s. Saliva was collected for 3 min each at different time intervals of 0 (baseline), 5, 10, 15, 30, 60, 120, and 180 min after the rinsing. Fluoride concentrations were determined using a fluoride electrode, and the area under the salivary clearance - time curve (AUC: ppm‧min) of each toothpaste was calculated as the salivary fluoride retention. The main study was then conducted to evaluate the salivary fluoride concentrations as well as the AUC value using 0.5 g of 5 wt % S-PRG filler toothpaste, followed by NaF, MFP, and AmF toothpastes.

RESULTS

Since there were no statistical differences between using 1.0 and 0.5 g of 20 wt % S-PRG toothpastes in salivary fluoride concentrations as well as the AUC value throughout the 180 min measurement, the volume was set as 0.5 g for the following studies. Concentrations of 5 and 20 wt % S-PRG toothpastes retained 0.09 ppm F or more in saliva even after 180 min. No statistical differences were seen in the salivary fluoride concentrations at any time intervals as well as the AUC value between 5 and 20 wt % S-PRG toothpastes. Based on these results, the concentration of 5 wt % S-PRG toothpaste was used for the main comparative study. MFP toothpaste resulted in by far the lowest salivary fluoride concentrations (0.06 ppm F at 180 min) and the AUC value (24.6 ppm‧min), whereas 5 wt % S-PRG toothpaste (0.15 ppm F at 180 min, 92.3 ppm‧min) displayed retention on par with AmF toothpaste which appeared to result in higher values (0.17 ppm F at 180 min, 103 ppm‧min), compared to NaF toothpaste (0.12 ppm F at 180 min, 49.3 ppm‧min).

CONCLUSIONS

The salivary fluoride concentrations following toothbrushing with 0.5 g of 5 wt % S-PRG filler containing toothpaste showed retention similar to the best performing 1400 ppm F AmF toothpaste even 180 min after toothbrushing.

Antibacterial Activity of a Bioactive Tooth-Coating Material Containing Surface Pre-Reacted Glass in a Complex Multispecies Subgingival Biofilm

Bioactive materials were developed with the ability to release fluoride and provide some antimicrobial potential, to be widely used in dentistry today. However, few scientific studies have evaluated the antimicrobial activity of bioactive surface pre-reacted glass (S-PRG) coatings (PRG Barrier Coat, Shofu, Kyoto, Japan) on periodontopathogenic biofilms. This study evaluated the antibacterial activity of S-PRG fillers on the microbial profile of multispecies subgingival biofilms. A Calgary Biofilm Device (CBD) was used to grow a 33-species biofilm related to periodontitis for 7 days. The S-PRG coating was applied on CBD pins from the test group and photo-activated (PRG Barrier Coat, Shofu), while the control group received no coating. Seven days after treatment, the total bacterial counts, metabolic activity, and microbial profile of the biofilms were observed using a colorimetric assay and DNA-DNA hybridization. Statistical analyses were applied; namely, the Mann-Whitney, Kruskal-Wallis, and Dunn's post hoc tests. The bacterial activity of the test group was reduced by 25.7% compared with that of the control group. A statistically significant reduction was observed for the counts of 15 species: A. naeslundii, A. odontolyticus, V. parvula, C. ochracea, C. sputigena, E. corrodens, C. gracilis, F. nucleatum polymorphum, F. nucleatum vincentii, F. periodonticum, P. intermedia, P. gingivalis, G. morbillorum, S. anginosus, and S. noxia (p ≤ 0.05). The bioactive coating containing S-PRG modified the composition of the subgingival biofilm in vitro, thereby decreasing colonization by pathogens.

Effect of Zinc Oxide Incorporation on the Antibacterial, Physicochemical, and Mechanical Properties of Pit and Fissure Sealants

This study aimed to evaluate the antibacterial, physicochemical, and mechanical properties of pit and fissure sealants containing different weight percentages of zinc oxide nanoparticles (ZnO NPs). The following amounts of ZnO NPs were added to a commercially available pit and fissure sealant (BeautiSealant, Shofu, Japan) to prepare the experimental materials: 0 wt.% (commercial control (CC)), 0.5 wt.% (ZnO 0.5), 1 wt.% (ZnO 1.0), 2 wt.% (ZnO 2.0), and 4 wt.% (ZnO 4.0). The antibacterial effect against S. mutans was confirmed by counting the colony-forming units (CFUs) and observing live/dead bacteria. In addition, ion release, depth of cure, water sorption and solubility, and flexural strength tests were conducted. When compared with the CC, the experimental groups containing ZnO NPs showed zinc ion emission and significantly different CFUs (p < 0.05) with fewer live bacteria. ZnO NP addition reduced the depth of cure and water solubility and increased water sorption in comparison with the CC (p < 0.05). However, all groups showed similar flexural strength (p > 0.05). The pit and fissure sealants containing ZnO NPs exhibited antibacterial activity against S. mutans with no negative effects on physicochemical and mechanical properties, and thus, these sealants can be ideal secondary caries prevention material.

Surface Modification of Pure Zinc by Acid Etching: Accelerating the Corrosion Rate and Enhancing Biocompatibility and Antibacterial Characteristics

Zinc (Zn) has recently been identified as an auspicious biodegradable metal for medical implants and devices due to its tunable mechanical properties and good biocompatibility. However, the slow corrosion rate of Zn in a physiological environment does not meet the requirements for biodegradable implants, hindering its clinical translation. The present study aimed to accelerate the corrosion rate of pure Zn by utilizing acid etching to roughen the surface and increase the substrate surface area. The effects of acid etching on surface morphology, surface roughness, tensile properties, hardness, electrochemical corrosion and degradation behavior, cytocompatibility, direct cell attachment, and biofilm formation were investigated. Interestingly, acid-treated Zn showed an exceptionally high rate of corrosion (∼226-125 μm/year) compared to untreated Zn (∼62 μm/year), attributed to the increased surface roughness (R_a ∼ 1.12 μm) of acid-etched samples. Immersion tests in Hank's solution revealed that acid etching accelerated the degradation rate of Zn samples. In vitro, MC3T3-E1 cell lines in 50 and 25% conditioned media extracts of treated samples showed good cytocompatibility. Reduced bacterial adhesion, biofilm formation, and dispersion were observed for Staphylococci aureus biofilms cultured on acid-etched pure Zn substrates. These results suggest that the surface modification of biodegradable pure Zn metals by acid etching markedly increases the translation potential of zinc for various biomedical applications.

Influence of Bioinspired Lithium-Doped Titanium Implants on Gingival Fibroblast Bioactivity and Biofilm Adhesion

Soft tissue integration (STI) at the transmucosal level around dental implants is crucial for the long-term success of dental implants. Surface modification of titanium dental implants could be an effective way to enhance peri-implant STI. The present study aimed to investigate the effect of bioinspired lithium (Li)-doped Ti surface on the behaviour of human gingival fibroblasts (HGFs) and oral biofilm in vitro. HGFs were cultured on various Ti surfaces—Li-doped Ti (Li_Ti), NaOH_Ti and micro-rough Ti (Control_Ti)—and were evaluated for viability, adhesion, extracellular matrix protein expression and cytokine secretion. Furthermore, single species bacteria (Staphylococcus aureus) and multi-species oral biofilms from saliva were cultured on each surface and assessed for viability and metabolic activity. The results show that both Li_Ti and NaOH_Ti significantly increased the proliferation of HGFs compared to the control. Fibroblast growth factor-2 (FGF-2) mRNA levels were significantly increased on Li_Ti and NaOH_Ti at day 7. Moreover, Li_Ti upregulated COL-I and fibronectin gene expression compared to the NaOH_Ti. A significant decrease in bacterial metabolic activity was detected for both the Li_Ti and NaOH_Ti surfaces. Together, these results suggest that bioinspired Li-doped Ti promotes HGF bioactivity while suppressing bacterial adhesion and growth. This is of clinical importance regarding STI improvement during the maintenance phase of the dental implant treatment.