2D perovskite-based high spatial resolution X-ray detectors

Near-Unity Green Luminescent Hybrid Manganese Halides as X-ray Scintillators

The increasing demands in optoelectronic applications have driven the advancement of organic-inorganic hybrid metal halides (OIMHs), owing to their exceptional optical and scintillation properties. Among them, zero-dimensional (0D) low-toxic manganese-based scintillators have garnered significant interest due to their exceptional optical transparency and elevated photoluminescence quantum yields (PLQYs), making them promising for colorful light-emitting diodes and X-ray imaging applications. In this study, two OIMH single crystals of (Br-PrTPP)2MnBr4 (Br-PrTPP = (3-bromopropyl) triphenylphosphonium) and (Br-BuTPP)2MnBr4 (Br-BuTPP = (4-bromobutyl) triphenylphosphonium) were prepared via a facile saturated crystallization method. Benefiting from the tetrahedrally coordinated [MnBr4]2- polyhedron, both of them exhibited strong green emissions peaked at 517 nm owing to the d-d electron transition of Mn2+ with near-unity PLQYs of 99.33 and 86.85%, respectively. Moreover, benefiting from the high optical transparencies and remarkable luminescence properties, these manganese halides also exhibit excellent radioluminescent performance with the highest light yield of up to 68,000 photons MeV-1, negligible afterglow (0.4 ms), and linear response to X-ray dose rate with the lowest detection limit of 45 nGyair s-1. In X-ray imaging, the flexible film made by the composite of (Br-PrTPP)2MnBr4 and PDMS shows an ultrahigh spatial resolution of 12.78 lp mm-1, which provides a potential visualization tool for X-ray radiography.

Phase-engineering compact and flexible CsPbBr3 microcrystal films for robust X-ray detection

All-inorganic CsPbBr3 perovskites have gained significant attention due to their potential in direct X-ray detection. The fabrication of stable, pinhole-free thick films remains challenging, hindering their integration in durable, large-area high-resolution devices. In this study, we propose a facile strategy using a non-conductive polymer to create a flexible, compact thick film under ambient conditions. Furthermore, we investigate the effect of introducing the 2D CsPb2Br5 phase into CsPbBr3 perovskite crystals on their photophysical properties and charge transport. Upon X-ray exposure, the devices consisting of the dual phase exhibit improved stability and more effective operation at higher voltages. Rietveld refinement shows that, due to the presence of the second phase, local distortions and Pb-vacancies are introduced within the CsPbBr3 lattice. This in turn presumably increases the ion migration energy barrier, resulting in a very low dark current and hence, enhanced stability. This feature might benefit local charge extraction and, ultimately, the X-ray image resolution. These findings also suggest that introducing a second phase in the perovskite structure can be advantageous for efficient photon-to-charge carrier conversion, as applied in medical imaging.

Perovskite Scintillators for Improved X-ray Detection and Imaging

Halide perovskites (HPs) recently have emerged as one class of competitive scintillators for X-ray detection and imaging owing to its high quantum efficiency, short decay time, superior X-ray absorption capacity, low cost, and ease of crystal growth. The tunable structure and versatile chemical compositions of halide perovskites provide distinguishable advantages over traditional inorganic scintillators for optimizing scintillation performance. Since the first observation of the scintillation phenomenon in HPs, substantial efforts have been devoted to expanding the inventory of HP scintillators and regulating material properties. Understanding the relationship between the structure and scintillation properties of HP scintillators is essential for developing materials with improved X-ray detection and imaging capacities. This review summarizes strategies for improving the light yield of HP scintillators and provides a roadmap for improving the X-ray imaging performance. Additionally, methods for controlling the light propagation direction in HP scintillators are highlighted for improving X-ray imaging resolution. Finally, we highlight the current challenge in HP scintillators and provide a perspective on the future development of this emerging scintillator.

Lattice Expansion in Rb-Doped Hybrid Organic-Inorganic Perovskite Crystals Resulting in Smaller Band-Gap and Higher Light-Yield Scintillators

Two-dimensional hybrid-organic-inorganic perovskite (2D-HOIP) lead bromide perovskite crystals have demonstrated great potential as scintillators with high light yields and fast decay times while also being low cost with solution-processable materials for wide energy radiation detection. Ion doping has been also shown to be a very promising avenue for improvements of the scintillation properties of 2D-HOIP crystals. In this paper, we discuss the effect of rubidium (Rb) doping on two previously reported 2D-HOIP single crystals, BA₂PbBr₄ and PEA₂PbBr₄. We observe that doping the perovskite crystals with Rb ions leads to an expansion of the crystal lattices of the materials, which also leads to narrowing of band gaps down to 84% of the pure compounds. Rb doping of BA₂PbBr₄ and PEA₂PbBr₄ shows a broadening in the photoluminescence and scintillation emissions of both perovskite crystals. Rb doping also leads to faster γ-ray scintillation decay times, as fast as 4.4 ns, with average decay time decreases of 15% and 8% for Rb-doped BA₂PbBr₄ and PEA₂PbBr₄, respectively, compared to those of undoped crystals. The inclusion of Rb ions also leads to a slightly longer afterglow, with residual scintillation still being below 1% after 5 s at 10 K, for both undoped and Rb-doped perovskite crystals. The light yield of both perovskites is significantly increased by Rb doping with improvements of 58% and 25% for BA₂PbBr₄ and PEA₂PbBr₄, respectively. This work shows that Rb doping leads to a significant enhancement of the 2D-HOIP crystal performance, which is of particular significance for high light yield and fast timing applications, such as photon counting or positron emission tomography.

Next generation high resolution perovskite direct conversion detector: Monte Carlo design optimisation and virtual clinical trial

We implement virtual clinical integration of next-generation perovskite detectors into common x-ray imaging devices. This was achieved by performing Monte Carlo (MC) optimisation of the design and benchmarking of low cost, high spatial resolution, direct conversion perovskite crystal x-ray flat panel imagers for a next generation of breast-, MV-, and kV-cone beam CT detectors. Semiconductor methylammonium lead bromide perovskite crystals energy deposition efficiencies calculated in TOPAS were benchmarked against four common detector materials for twelve detector crystal thicknesses between 40 to 15 mm and ten beam energies ranging from 20 keV to 6 MeV. Based on these simulations, Koning's dedicated breast CT, and Varian's Truebeam kV- and MV-cone beam CT systems were designated as suitable applications for perovskite detectors. System specific Fastcat hybrid MC cone beam CT image simulation was subsequently used to optimise the perovskite detector design and conduct virtual clinical trials. Device-specific optimal perovskite crystal thicknesses were calculated to be 0.30, 0.86, and 1.99 mm for Koning breast CT and Truebeam kV- and MV-cone beam CT systems, respectively. Replacing the current detectors on these machines with low cost perovskite crystal detectors could be advantageous as it would simultaneously yield 12.1%, 9.5% and 86.1% improvements in detective quantum efficiency as well as increases in contrast to noise ratio in brain, lung, and bone tissues.

Flexible perovskite scintillators and detectors for X-ray detection

X-ray detection and imaging technology has been rapidly developed for various fields since 1895, offering great opportunities to scientific and industrial communities. Particularly, flexible X-ray detectors have drawn numerous attention in medical-related applications, solving the uniform issues of traditional rigid X-ray detectors. Out of all the potential materials, metal halide perovskites (MHPs) have been emerged as excellent candidates as flexible X-ray scintillators and detectors owing to the advantages including low temperature solution processable, strong X-ray absorption coefficient, large mobility lifetime product and tunable bandgap. In this review, the recent advances of MHP-based flexible X-ray detectors are comprehensively summarized, focusing on the scalable synthesis technologies of materials and diverse device architectures, and covering both direct and indirect X-ray detection. A brief outlook that highlights the current challenges impeding the commercialization of flexible MHP-based X-ray detectors is also included with possible solutions to those problem being provided.

A high-speed radiation imaging system based on liquid scintillator filled capillary arrays

A high-speed radiation imaging system based on an image converter of liquid scintillator filled capillary arrays has been developed, which is sensitive to x rays, gamma rays, and neutrons. This imaging system has advantages of both high spatial resolution and high sensitivity because increasing the thickness of the image converter only leads to little deterioration on imaging resolution. The capillary arrays have dimensions of 150 mm diameter and 50 mm thickness, with 100 µm diameter of each capillary. The fluorescence decay time of the filled liquid scintillator based on the mixture of p-xylene and 2,5-diphenyloxazole has been evaluated to be ∼3 ns with the single photon method under the gamma ray excitation. The spatial resolution has been experimentally evaluated to be about 1.15 and 0.6 mm, under excitation of x rays and neutrons, respectively. The imaging system has been applied for diagnosing the dynamic x-ray spot generated by the rod pinch. Two frames in single shot with 15 ns temporal resolution and 20 ns inter-frame separation time have been obtained, which show the spatiotemporal distribution of the electrons bombarding the tungsten rod, indicating the ability of this imaging system in diagnosing dynamic radiation objects. In addition, the technique of capillary arrays provides a promising path for applications of advanced liquid scintillators in the field of radiation imaging.

Mixed-halide copper-based perovskite R2Cu(Cl/Br)4 with different organic cations for reversible thermochromism

Mechanically exfoliated flakes of mixed-halide Cu-based perovskite crystals, R2Cu(Cl/Br)4, with three alkyl chains exhibit reversible thermochromic behavior with differences in crystal lattice behavior depending on the organic spacer used.