Association of hemodynamic factors and progressive aortic dilatation following type A aortic dissection surgical repair

Investigating the Role of Thrombosis, Fenestration, and False Lumen Orbital Orientation in the Hemodynamics of Type B Aortic Dissection

While much about the fundamental mechanisms behind the initiation and progression of Type B aortic dissection (TBAD) is still unknown, predictive models based on patient-specific computational fluid dynamics (CFD) can help in risk stratification and optimal clinical decision-making. Aiming at the development of personalized treatment, CFD simulations can be leveraged to investigate the interplay between complex aortic flow patterns and anatomical features. In this study, the hemodynamics of false lumen thrombosis, a large fenestration, and the orbital orientation of the false lumen is studied through image-based CFD simulations on three TBAD patient-specific geometries. A new pipeline was developed leveraging the open-source software SimVascular and Paraview to analyze multiple patients simultaneously and to achieve large-scale parallelization in CFD results based on patients' computed tomography (CT) images. The results of this study suggest that the internal orbital orientation of the false lumen contributes to maintaining a positive luminal pressure difference Δ P T L - F L = P T L - P F L between the true lumen (TL) and the false lumen (FL), despite an impingement area in the false lumen near the entry tear. A positive and high luminal pressure difference is thought to promote TL expansion and FL compression. Moreover, it was also found that both FL thrombosis at the entry tear region, and the presence of a large fenestration in the descending thoracic aorta reduce the magnitude of the negative luminal pressure difference, which in turn may reduce FL expansion and the risk of unstable aortic growth.

Stress Load and Ascending Aortic Aneurysms: An Observational, Longitudinal, Single-Center Study Using Computational Fluid Dynamics

Ascending aortic aneurysm (AAoA) is a silent disease with high mortality; however, the factors associated with a worse prognosis are not completely understood. The objective of this observational, longitudinal, single-center study was to identify the hemodynamic patterns and their influence on AAoA growth using computational fluid dynamics (CFD), focusing on the effects of geometrical variations on aortic hemodynamics. Personalized anatomic models were obtained from angiotomography scans of 30 patients in two different years (with intervals of one to three years between them), of which 16 (53%) showed aneurysm growth (defined as an increase in the ascending aorta volume by 5% or more). Numerically determined velocity and pressure fields were compared with the outcome of aneurysm growth. Through a statistical analysis, hemodynamic characteristics were found to be associated with aneurysm growth: average and maximum high pressure (superior to 100 Pa); average and maximum high wall shear stress (superior to 7 Pa) combined with high pressure (>100 Pa); and stress load over time (maximum pressure multiplied by the time interval between the exams). This study provides insights into a worse prognosis of this serious disease and may collaborate for the expansion of knowledge about mechanobiology in the progression of AAoA.

A hemodynamic analysis of fenestrated physician-modified endograft repair for complicated aortic dissections involving the visceral arteries

OBJECTIVE

The aim of this study is to perform patient-specific hemodynamic simulations of the patients with complicated aortic dissection underwent Physician-modified endograft (PMEG) and evaluate the treatment outcome.

METHOD

12 patient-specific models were reconstructed from computed tomography angiography (CTA) data of 6 patients with complicated aortic dissection before and after the PMEG. Hemodynamic simulations were conducted with the same time-varying volumetric flow rate extracted from the literature and 3-element Windkessel model (3 EWM) boundary conditions were applied at the aortic outlet. Hemodynamic indicators such as time-averaged wall shear stress (TAWSS), relative residence time (RRT) and endothelial cell activation potential (ECAP) were obtained to evaluate the postoperative effect of PMEG.

RESULTS

Comparing with the preoperative models, the flow rates of most visceral arteries were increased in the postoperative models (PSMA = 0.012, PRRA = 0.013, and PLRA = 0.005). Pressure and TAWSS in visceral regions were significantly reduced (PP = 0.003 and PTAWSS = 0.017). With the false lumens (FL) covered by the stent grafts, the average TAWSS level increased in the regions of postoperative abdominal aorta (P = 0.002), and the average RRT and ECAP values decreased significantly (PRRT = 0.02 and PECAP = 0.003).

CONCLUSION

This study shows that PMEG, as a new technique for the treatment of complicated aortic dissection involving the distal tears in the visceral region, can effectively restore the abnormal blood supply of the visceral arteries, reduce the risk of aortic rupture, the formation of aortic dissection aneurysm (ADA), and thrombosis. This corresponds well with clinical retrospective studies and 1-year follow-up outcomes. The findings of this study are of great significance for the development of PMEG.

The Influence of Minor Aortic Branches in Patient-Specific Flow Simulations of Type-B Aortic Dissection

Type-B aortic dissection (TBAD) is a disease in which a tear develops in the intimal layer of the descending aorta forming a true lumen and false lumen (FL). Because disease outcomes are thought to be influenced by haemodynamic quantities such as pressure and wall shear stress (WSS), their analysis via numerical simulations may provide valuable clinical insights. Major aortic branches are routinely included in simulations but minor branches are virtually always neglected, despite being implicated in TBAD progression and the development of complications. As minor branches are estimated to carry about 7-21% of cardiac output, neglecting them may affect simulation accuracy. We present the first simulation of TBAD with all pairs of intercostal, subcostal and lumbar arteries, using 4D-flow MRI (4DMR) to inform patient-specific boundary conditions. Compared to an equivalent case without minor branches, their inclusion improved agreement with 4DMR velocities, reduced time-averaged WSS (TAWSS) and transmural pressure and elevated oscillatory shear in regions where FL dilatation and calcification were observed in vivo. Minor branch inclusion resulted in differences of 60-75% in these metrics of potential clinical relevance, indicating a need to account for minor branch flow loss if simulation accuracy is sought.

A computational study of the effects of size, location, and number of tears on haemodynamics in surgically repaired type A aortic dissection

Objective

This study aimed to comprehensively examine the roles of size, location, and number of tears in the progression of surgically repaired type A aortic dissection (TAAD) by assessing haemodynamic changes through patient-specific computational fluid dynamic (CFD) simulations.

Methods

Two patient-specific TAAD geometries with replaced ascending aorta were reconstructed based upon computed 15 tomography (CT) scans, after which 10 hypothetical models (5 per patient) with different tear configurations were artificially created. CFD simulations were performed on all the models under physiologically realistic boundary conditions.

Results

Our simulation results showed that increasing either the size or number of the re-entry tears reduced the luminal pressure difference (LPD) and maximum time-averaged wall shear stress (TAWSS), as well as areas exposed to abnormally high or low TAWSS values. Models with a large re-entry tear outperformed the others by reducing the maximum LPD by 1.88 mmHg and 7.39 mmHg, for patients 1 and 2, respectively. Moreover, proximally located re-entry tears in the descending aorta were more effective at reducing LPD than distal re-entry tears.

Discussion

These computational results indicate that the presence of a relatively large re-entry tear in the proximal descending aorta might help stabilize post-surgery aortic growth. This finding has important implications for the management and risk stratification of surgically repaired TAAD patients. Nevertheless, further validation in a large patient cohort is needed.

Progression of distal aorta after endovascular fenestration/stenting in acute type A aortic dissection with malperfusion syndrome

Objective

The study objective was to evaluate the progression of dissected distal aorta in patients with acute type A aortic dissection with malperfusion syndrome treated with endovascular fenestration/stenting and delayed open aortic repair.

Methods

From 1996 to 2021, 927 patients presented with acute type A aortic dissection. Of these, 534 had DeBakey I dissection with no malperfusion syndrome and underwent emergency open aortic repair (no malperfusion syndrome group), whereas 97 patients with malperfusion syndrome underwent fenestration/stenting and delayed open aortic repair (malperfusion syndrome group). Sixty-three patients with malperfusion syndrome treated with fenestration/stenting were excluded due to no open aortic repair, including death from organ failure (n = 31), death from aortic rupture (n = 16), and discharged alive (n = 16).

Results

Compared with the no malperfusion syndrome group, the malperfusion syndrome group had more patients with acute renal failure (60% vs 4.3%, P < .001). Both groups had similar aortic root and arch procedures. Postoperatively, the malperfusion syndrome group had similar operative mortality (5.2% vs 7.9%, P = .35) and permanent dialysis (4.7% vs 2.9%, P = .50), but more new-onset dialysis (22% vs 7.7%, P < .001) and prolonged ventilation (72% vs 49%, P < .001). The growth rate of the aortic arch (0.38 vs 0.35 mm/year, P = .81) was similar between the malperfusion syndrome and no malperfusion syndrome groups. The descending thoracic aorta growth rate (1.03 vs 0.68 mm/year, P = .001) and abdominal aorta growth rate (0.76 vs 0.59 mm/year, P = .02) were significantly higher in the malperfusion syndrome group. The cumulative incidence of reoperation over 10 years (18% vs 18%, P = .81) and 15-year survival outcome (50% vs 48%, P = .43) were similar between the malperfusion syndrome and no malperfusion syndrome groups.

Conclusions

Endovascular fenestration/stenting followed by delayed open aortic repair was a valid approach for patients with malperfusion syndrome.

First insights into the role of wall shear stress in the development of a distal stent graft induced new entry through computational fluid dynamics simulations

Background

Distal stent graft induced new entry (dSINE) is an emerging complication after frozen elephant trunk (FET) procedure. The aim of this computational fluid dynamics (CFD) study was to investigate the role of wall shear stress (WSS) after the development of dSINE based on hemodynamic changes.

Methods

Aortic diameter and WSS of five patients who developed a dSINE after FET procedure were retrospectively analyzed before and after the occurrence of dSINE. Patient-specific 3-dimentional surface models of the aortic lumen were reconstructed from computed tomography angiographic datasets (pre dSINE: n=5, dSINE: n=5) to perform steady-state CFD simulations with laminar blood flow and zero pressure outlet conditions. WSS was calculated at the level of the stent graft (SG), the landing zone of the SG and at a location further distal to the SG, as well as on the outer and inner curvature of the aorta from SG center to its distal end.

Results

Post dSINE occurrence, median WSS increased significantly from 0.87 [interquartile range (IQR): 0.83-1.03] to 1.55 (IQR: 1.09-2.70) Pa, (P=0.043) within the SG and from 1.22 (IQR: 0.81-1.44) to 1.76 (IQR: 1.55-3.60) Pa, (P=0.043) at the landing zone of the SG. A non-significant increase from 1.22 (IQR: 0.59-3.50) to 2.58 (IQR: 1.16-3.78) Pa, (P=0.686) further downstream was observed. WSS at the outer curvature of the SG was significantly higher compared to WSS at the inner curvature for dSINE.

Conclusions

Adverse hemodynamic conditions in the form of elevated WSS consist inside and at the distal end of the SG as well as at the outer curvature of the aorta, which may contribute to weakening of the aortic wall. These new findings emphasize the relevance and potential of WSS in dSINE for additional adverse events, such as aortic rupture. Further prospective studies are warranted to explore if the combination of clinical parameters with WSS might be useful to decide which patients require an urgent reintervention in terms of a SG extension.

Volume Analysis to Predict the Long-Term Evolution of Residual Aortic Dissection after Type A Repair

Background: The aim of this study was to evaluate the aortic diameter and volume during the first year after a type A repair to predict the long-term prognosis of a residual aortic dissection (RAD). Methods: All patients treated in our center for an acute type A dissection with a RAD and follow-up > 3 years were included. We defined two groups: group 1 with dissection-related events (defined as an aneurysmal evolution, distal reintervention, or aortic-related death) and group 2 without dissection-related events. The aortic diameters and volume analysis were evaluated on three postoperative CT scans: pre-discharge (T1), 3−6 months (T2) and 1 year (T3). Results: Between 2009 and 2016, 54 patients were included. Following a mean follow-up of 75.4 months (SD 31.5), the rate of dissection-related events was 62.9% (34/54). The total aortic diameters of the descending thoracic aorta were greater in group 1 at T1, T2 and T3, with greater diameters in the FL (p < 0.01). The aortic diameter evolution at 3 months was not predictive of long-term dissection-related events. The total thoracic aortic volume was significantly greater in group 1 at T1 (p < 0.01), T2 (p < 0.01), and T3 (p < 0.01). At 3 months, the increase in the FL volume was significantly greater in group 1 (p < 0.01) and was predictive for long-term dissection-related events. Conclusion: This study shows that an initial CT scan volume analysis coupled with another at 3 months is predictive for the long-term evolution in a RAD. Based on this finding, more aggressive treatment could be given at an earlier stage.

Fluid-Structure Interaction Simulations of Repaired Type A Aortic Dissection: a Comprehensive Comparison With Rigid Wall Models

This study aimed to evaluate the effect of aortic wall compliance on intraluminal hemodynamics within surgically repaired type A aortic dissection (TAAD). Fully coupled two-way fluid-structure interaction (FSI) simulations were performed on two patient-specific post-surgery TAAD models reconstructed from computed tomography angiography images. Our FSI model incorporated prestress and different material properties for the aorta and graft. Computational results, including velocity, wall shear stress (WSS) and pressure difference between the true and false lumen, were compared between the FSI and rigid wall simulations. It was found that the FSI model predicted lower blood velocities and WSS along the dissected aorta. In particular, the area exposed to low time-averaged WSS (≤0.2 Pa) was increased from 21 cm² (rigid) to 38 cm² (FSI) in patient 1 and from 35 cm² (rigid) to 144 cm² (FSI) in patient 2. FSI models also produced more disturbed flow where much larger regions presented with higher turbulence intensity as compared to the rigid wall models. The effect of wall compliance on pressure difference between the true and false lumen was insignificant, with the maximum difference between FSI and rigid models being less than 0.25 mmHg for the two patient-specific models. Comparisons of simulation results for models with different Young’s moduli revealed that a more compliant wall resulted in further reduction in velocity and WSS magnitudes because of increased displacements. This study demonstrated the importance of FSI simulation for accurate prediction of low WSS regions in surgically repaired TAAD, but a rigid wall computational fluid dynamics simulation would be sufficient for prediction of luminal pressure difference.

Prediction of aortic dilatation in surgically repaired type A dissection: A longitudinal study using computational fluid dynamics

OBJECTIVE

To examine the role of a key hemodynamic parameter, namely the true and false lumen pressure difference, to predict progressive aortic dilatation following type A aortic dissection (TAAD) repair.

METHODS

Four patients with surgically repaired TAAD with multiple follow-up computed tomography angiography scans (4-5 scans per patient; N = 18) were included. Through-plane diameter of the residual native thoracic aorta was measured in various aortic segments during the follow up period (mean follow-up: 49.6 ± 31.2 months). Computational flow analysis was performed to estimate true and false lumen pressure difference at the same locations and the correlation with aortic size change was studied using a linear mixed effects model.

RESULTS

Greater pressure difference between the true and false lumen was consistent with greater aortic diameter expansion during the follow up period (linear mixed effects analysis; coefficient, 0.26; 95% confidence interval, 0.15-0.37; P < .001). Based on our limited data points, a pressure difference higher than 5 mm Hg might cause unstable aortic growth.

CONCLUSIONS

Computational fluid dynamic assessment of standard aortic computed tomography angiography offers a noninvasive technique that predicts the risk of aortic dilatation following TAAD. The technique may be used to plan closer observation or intervention in high-risk patients.

The effect of beta-blockers on hemodynamic parameters in patient-specific blood flow simulations of type-B aortic dissection: a virtual study

Aortic dissection (AD) is one of the fatal and complex conditions. Since there is a lack of a specific treatment guideline for type-B AD, a better understanding of patient-specific hemodynamics and therapy outcomes can potentially control the progression of the disease and aid in the clinical decision-making process. In this work, a patient-specific geometry of type-B AD is reconstructed from computed tomography images, and a numerical simulation using personalised computational fluid dynamics (CFD) with three-element Windkessel model boundary condition at each outlet is implemented. According to the physiological response of beta-blockers to the reduction of left ventricular contractions, three case studies with different heart rates are created. Several hemodynamic features, including time-averaged wall shear stress (TAWSS), highly oscillatory, low magnitude shear (HOLMES), and flow pattern are investigated and compared between each case. Results show that decreasing TAWSS, which is caused by the reduction of the velocity gradient, prevents vessel wall at entry tear from rupture. Additionally, with the increase in HOLMES value at distal false lumen, calcification and plaque formation in the moderate and regular-heart rate cases are successfully controlled. This work demonstrates how CFD methods with non-invasive hemodynamic metrics can be developed to predict the hemodynamic changes before medication or other invasive operations. These consequences can be a powerful framework for clinicians and surgical communities to improve their diagnostic and pre-procedural planning.