Species and characteristics of volatile organic compounds emitted from an auto-repair painting workshop

Portable Mass Spectrometry for On-site Detection of Hazardous Volatile Organic Compounds via Robotic Extractive Sampling

Various hazardous volatile organic compounds (VOCs) are frequently released into environments during accidental events that cause many hazards to ecosystems and humans. Therefore, rapid, sensitive, and on-site detection of hazardous VOCs is crucial to understand their compositions, characteristics, and distributions in complex environments. However, manual handling of hazardous VOCs remains a challenging task, because of the inaccessible environments and health risk. In this work, we designed a quadruped robotic sampler to reach different complex environments for capturing trace hazardous VOCs using a needle trap device (NTD) by remote manipulation. The captured samples were rapidly identified by portable mass spectrometry (MS) within minutes. Rapid detection of various hazardous VOCs including toxicants, chemical warfare agents, and burning materials from different environments was successfully achieved using this robot-MS system. On-site detection of 83 typical hazardous VOCs was examined. Acceptable analytical performances including low detection limits (at subng/mL level), good reproducibility (relative standard deviation (RSD) < 20%, n = 6), excellent quantitative ability (R2 > 0.99), and detection speed (within minutes) were also obtained. Our results show that the robot-MS system has excellent performance including safety, controllability, applicability, and robustness under dangerous chemical conditions.

Distribution of volatile organic compounds by distance from industrial complexes and potential health impact on the residents

Volatile organic compounds (VOCs) are the air pollutants emitted from the petrochemical industry known to pose adverse health effects on workers. The database based on the third phase of The Environmental Health Study in the Korean National Industrial Complexes (EHSNIC) in Ulsan conducted from 2018 to 2021 was used. Subjects were divided into the exposed and control group according to the estimated pollution level and distances from the industrial complexes. Ambient benzene, ethylbenzene, and xylene were significantly higher in the exposed group compared to the controls, as well as their metabolites. Risk of chronic disease and atopic dermatitis was higher in the exposed group which was supported by higher serum inflammatory markers and high hazard index of the exposed region. These results can draw attention to people engaged with environmental plans and used as primary data when making policies to reduce pollutant levels around industrial complexes.

High-solution emission characters and health risks of volatile organic compounds for sprayers in automobile repair industries

The increasing automobile repair industries (ARIs) with spray facilities have become an important volatile organic compound (VOC) pollution source in China. However, the VOC health risk assessment for long-term exposure in ARIs has not been well characterized. In this study, though sampled VOCs from 51 typical ARIs in Beijing, the relationship between emission patterns, average daily exposure concentrations (EC), and health risks was comprehensively analyzed with the health assessment method. Results showed that concentrations of 117 VOCs from the samples ranged from 68.53 to 19863.32 μg·m-3, while the ARI operator's daily VOC inhalation EC was 11.24-1460.70 μg·m-3. The organic VOC (OVOC) concentration accounted for 73.16 ~ 94.52% in the solvent-based paint workshops, while aromatics were the main VOC component in water-based paint spraying (WPS) workshops, accounting for 70.08%, respectively. And the method of inhalation exposure health risk assessment was firstly used to evaluate carcinogenicity and non-carcinogenicity risk for sprayers in ARIs. The cumulative lifetime carcinogenic risk (LCR) for 24 sampled VOCs were within acceptable ranges, while the mean hazard index (HI) for 1 year with 44 sampled VOCs was over 1. Among them, ethyl alcohol had a high carcinogenic risk in both mixed water-based paint (MP) and solvent-based paint workshops. The mean HI associated with aromatics were 2.88E - 3 and 4.30E - 3 for 1 h in MP and WPS workshops. O-ethyl toluene and acetone are VOC components that need to be paid attention to in future paint raw materials and spraying operations. Our study will provide the important references for the standard of VOC occupational exposure health limits in ARIs.

Characteristics of Double-Layer, Large-Flow Dielectric Barrier Discharge Plasma Source for Toluene Decomposition

The direct decomposition of toluene-containing humidified air at large flow rates was studied in two types of reactors with dielectric barrier discharge (DBD) features in ambient conditions. A scalable large-flow DBD reactor (single-layer reactor) was designed to verify the feasibility of large-flow plasma generation and evaluate its decomposition characteristics with toluene-containing humidified air, which have not been investigated. In addition, another large-flow DBD reactor with a multilayer structure (two-layer reactor) was developed as an upscale version of the single-layer reactor, and the scalability and superiority of the features of the multilayer structure were validated by comparing the decomposition characteristics of the two reactors. Consequently, the large-flow DBD reactor showed similar decomposition characteristics to those of the small-flow DBD reactor regarding applied voltage, flow velocity, flow rate, and discharge length, thus justifying the feasibility of large-flow plasma generation. Additionally, the two-layer reactor is more effective than the single-layer reactor, suggesting multilayer configuration is a viable scheme for further upscaled DBD systems. A high decomposition rate of 59.5% was achieved at the considerably large flow rate of 110 L/min. The results provide fundamental data and present guidelines for the implementation of the DBD plasma-based system as a solution for volatile organic compound abatement.

Emission characteristics, risk assessment and scale effective control of VOCs from automobile repair industry in Beijing

Automobile repair is regarded as a typical domestic source of VOCs in China characterized by numerous sites, wide dispersion and intermittent VOCs emissions. It is of great importance to study and control VOCs from such activities. In this research, emission characteristics, risk assessment and scale effective control of VOCs from automobile repair in Beijing were studied. Results showed that coating spraying and baking were the main processes of VOCs and the major species determined were mostly oxygen-containing VOCs and aromatic hydrocarbons in the case of solvent-based coating usage. Meanwhile, alkanes were determined and accounted for 40 % of total VOCs emissions during the water-based coating spraying and baking. Generally, the total determined VOCs during the automobile repair processes were 1.06-1.27 mg/m³ and 2.93-53.46 mg/m³ for the usage of water-based and solvent-based paint, respectively. Health risk assessments indicated that the residents in the region about 30 m high within a radius of 20 m around the automobile repair plants might suffer from both serious non-carcinogenic and carcinogenic risk threats in the case of solvent-based coating usage in that the values of total hazard index (HI) represented by dichloropropane and acrolein were higher than 1 and the value of lifetime cancer risk (LCR) represented by dichloroethane was higher than 10^-5. Besides, those in the region about 30 m high and within a wider radius of 340 m might suffer from carcinogenic risk threat with a certain probability (LCR > 10^-6) no matter either solvent-based or water-based coatings were used. As for the scale control of VOCs from automobile repair, independent adsorption by activated carbon combined with mobile regeneration by catalytic combustion was also proposed as an efficient way.

Response of selected microbial strains and their consortia to the presence of automobile paints: Biofilm growth, matrix protein content and hydrolytic enzyme activity

The goal of the current study was to examine the effects of pollutants (White color – CP; Metallic red color – FM; Thinner – CN; Thinner for rinsing paint – MF; Basic color (primer) – FH) originating from the automotive industry on the biofilm growth, matrix protein content, and activity of the hydrolytic enzymes of selected microbial strains in laboratory conditions that mimic the bioreactor conditions. The chosen microorganisms (bacteria, yeasts, and fungi) were isolated from automotive industry wastewater. Pure microbe cultures and their consortia were injected into AMB Media carriers and developed into biofilms. The use of AMB media carriers has been linked to an increase in the active surface area colonized by microorganisms. Afterwards, the carriers were transferred to Erlenmeyer flasks with nutrient media and pollutants at a concentration of 200 μL/mL. The current study found that, depending on the microbial strain, development phase, and chemical structure, the assessed pollutants had an inhibitory or stimulatory influence on the growth of single cultures and their consortia. Statistical analysis found positive correlations between the protein content in the matrix and the biofilm biomass of Rhodotorula mucilaginosa and consortia in CP and FH media, respectively. The proteolytic activity of Candida utilis was very pronounced in media with MF and CN. The best alkaline phosphatase activity (ALP) was achieved in the CN medium of R. mucilaginosa. Acid invertase activity was the highest in the FM and CP media of Escherichia coli and consortia, respectively, whereas the highest alkaline invertase activity was measured in the MF medium of E. coli. A positive correlation was confirmed between ALP and the biofilm biomass of R. mucilaginosa in CP and CN media, as well as between ALP and the biofilm biomass of Penicillium expansum in FM medium. The findings provide novel insights into the extracellular hydrolytic activity of the investigated microbial strains in the presence of auto paints, as well as a good platform for subsequent research into comprehensive biofilm profiling using modern methodologies.

Degradation of gaseous volatile organic compounds (VOCs) by a novel UV-ozone technology

In this study, a UV-assisted ozonation (UV/O₃) process for the degradation of VOCs emissions with a final scrubbing phase was implemented to evaluate the removal efficiency of toluene and to prevent the release of polluting intermediates of the single-step process. Inlet toluene concentration and applied voltage were varied in order to investigate several operating conditions. The results highlighted that at higher inlet concentration the abatement of toluene was lower, while increase in ozone concentration led to an increase of the degradation efficiencies. The additional water scrubbing step enhanced the abatement of UV/O₃ up to 98.5%, due to the solubilisation of ozone and by-products in the process water and, thus, the further oxidation of the contaminants within this phase. A maximum Elimination Capacity (EC_max) of 22.6 g m⁻³ h⁻¹ was achieved with the UV/O₃ + Scrubbing. The combined system boosted higher performance and stability compared to the stand-alone (UV/O₃) process along with a more economical and environmental sustainability.