Operational parameters optimization for remediation of crude oil-polluted water in floating treatment wetlands using response surface methodology

Pilot and full scale applications of floating treatment wetlands for treating diffuse pollution

Floating treatment wetlands (FTW) are nature-based solutions for the purification of open water systems such as rivers, ponds, and lakes polluted by diffuse sources as untreated or partially treated domestic wastewater and agricultural run-off. Compared with other physicochemical and biological technologies, FTW is a technology with low-cost, simple configuration, easy to operate; has a relatively high efficiency, and is energy-saving, and aesthetic. Water remediation in FTWs is supported by plant uptake and the growth of a biofilm on the water plant roots, so the selection of the macrophyte species is critical, not only to pollutant removal but also to the local ecosystem integrity, especially for full-scale implementation. The key factors such as buoyant frame/raft, plant growth support media, water depth, seasonal variation, and temperature have a considerable role in the design, operation, maintenance, and pollutant treatment performance of FTW. Harvesting is a necessary process to maintain efficient operation by limiting the re-pollution of plants in the decay phase. Furthermore, the harvested plant biomass can serve as a green source for the recovery of energy and value-added products.

Optimization of green and environmentally-benign synthesis of isoamyl acetate in the presence of ball-milled seashells by response surface methodology

Ball-milled seashells, as a nano-biocomposite catalyst and natural source of CaCO₃ in its aragonite microcrystalline form with fixed CO₂, was optimized for the synthesis of isoamyl acetate (3-methylbutyl ethanoate) by response surface methodology with a five-level three-factor rotatable circumscribed central composite design. The seashells nano-biocomposite has proved to be an excellent heterogeneous multifunctional catalyst for the green and environmentally-benign synthesis of isoamyl acetate from acetic acid and isoamyl alcohol under solvent-free conditions. A high yield of 91% was obtained under the following optimal conditions: molar ratio of alcohol: acetic acid (1:3.7), catalyst loading (15.7 mg), the reaction temperature (98 °C), and the reaction time (219 min). The outstanding advantages of this protocol are the use of an inexpensive, naturally occurring and easily prepared nano-biocomposite material having appropriate thermal stability and without any modifications using hazardous reagents, lower catalyst loading and reaction temperature, no use of corrosive Bronsted acids as well as toxic azeotropic solvents or water adsorbents, and simplicity of the procedure.

Nitrogen removal intensification of aerobic granular sludge through bioaugmentation with "heterotrophic nitrification-aerobic denitrification" consortium during petroleum wastewater treatment

The bioaugmentation potential of aerobic granular sludge (AGS) was investigated using heterotrophic nitrification-aerobic denitrification (HN-AD) bacterial consortium to improve nitrogen removal during petroleum wastewater treatment. An efficient HN-AD consortium was constructed by mixing Pseudomonas mendocina K0, Brucella sp. K1, Pseudomonas putida T4 and Paracoccus sp. T9. AGS bioaugmented by immobilized HN-AD consortium enhanced nitrogen removal, which showed NH₄⁺-N and TN removal efficiency of 92.4% and 79.8%, respectively. The immobilized consortium addition facilitated larger AGS formation, while granules > 2.0 mm accounted for 16.7% higher than that of control (6.7%). Further, the abundance of napA gene was 4-times higher in the bioaugmented AGS as compared to the control, which demonstrated the long-term stability of HN-AD consortium in the bioreactor. The bioaugmented AGS also showed a higher abundance of xenobiotics biodegradation and nitrogen metabolism. These results highlight that bioaugmentation of AGS technology could be effectively used for enhanced denitrification of petroleum wastewater.

Response Surface Methodology for Optimization of Operational Parameters To Remove Ciprofloxacin from Contaminated Water in the Presence of a Bacterial Consortium

Ciprofloxacin (CFX) is a broad-spectrum fluoroquinolone antibiotic that is widely used to treat bacterial infections in humans and other animals. However, its unwanted occurrence in any (eco)system can affect nontarget bacterial communities, which may also impair the performance of the natural or artificially established bioremediation system. The problem could be minimized by optimization of operational parameters via modeling of multifactorial tests. To this end, we used a Box-Behnken design in response surface methodology (RSM) to generate the experimental layout for testing the effect of the CFX biodegradation for four important parameters, that is, temperature (°C), pH, inoculum size (v/v %), and CFX concentration (mg L^-1). For inoculation, a consortium of three bacterial strains, namely, Acenitobacter lwofii ACRH76, Bacillus pumilus C2A1, and Mesorihizobium sp. HN3 was used to degrade 26 mg L^-1 of CFX. We found maximum degradation of CFX (98.97%; initial concentration of 25 mg L^-1) at 2% inoculum size, 7 pH, and 35 °C of temperature in 16 days. However, minimum degradation of CFX (48%; initial concentration of 50 mg L^-1) was found at pH 6, temperature 30 °C, and inoculum size 1%. Among different tested parameters, pH appears to be the main limiting factor for CFX degradation. Independent factors attributed 89.37% of variation toward CFX degradation as revealed by the value of the determination coefficient, that is, R ² = 0.8937. These results were used to formulate a mathematical model in which the computational data strongly correlated with the experimental results. This study showcases the importance of parameter optimization via RSM for any bioremediation studies particularly for antibiotics in an economical, harmless, and eco-friendly manner.