Statistical optimization, kinetic, equilibrium isotherm and thermodynamic studies of copper biosorption onto Rosa damascena leaves as a low-cost biosorbent

Surface functionalization, particle size and pharmaceutical co-contaminant dependent impact of nanoplastics on marine crustacean - Artemia salina

Despite a significant amount of research on micronanoplastics (MNPs), there is still a gap in our understanding of their function as transporters of other environmental pollutants (known as the Trojan horse effect) and the combined effects of ingestion, bioaccumulation, and toxicity to organisms. This study examined the individual effects of polystyrene nanoplastics (PSNPs) with various surface functionalizations (plain (PS), carboxylated (PS-COOH), and aminated (PS-NH2)), particle sizes (100 nm and 500 nm), and a pharmaceutical co-contaminant (metformin hydrochloride (MH), an anti-diabetic drug) on the marine crustacean - Artemia salina. The study specifically aimed to determine if MH alters the detrimental effects of PSNPs on A. salina. The potential toxicity of these emerging pollutants was assessed by examining mortality, hatching rate, morphological changes, and biochemical changes. Smaller nanoparticles had a more significant impact than larger ones, and PS-NH2 was more harmful than PS and PS-COOH. Exposure to the nanoparticle complex with MH resulted in a decrease in hatching rate, an increase in mortality, developmental abnormalities, an increase in reactive oxygen species, catalase, and lipid peroxidase, and a decrease in total protein and superoxide dismutase, indicating a synergistic effect. There were no significant differences between the complex and the individual nanoparticles. However, accumulating these particles in organisms could contaminate the food chain. These results highlight the potential environmental risks associated with the simultaneous exposure of aquatic species to plastics, particularly smaller PS, aminated PS, and pharmaceutical complex PS.

Potential bioremediation of lead and phenol by sunflower seed husk and rice straw-based biochar hybridized with bacterial consortium: a kinetic study

Environmental pollution is a global phenomenon and troublesome fact that poses a grave risk to all living entities. Via coupling carbonaceous feedstocks with outstanding microbial activity, kinetic experiments were established using the consortium of Proteus mirabilis and Raoultella planticola, biochar-derived sunflower seed husk (SHB) and rice straw (RSB), and their composites, which investigated at 30 °C (150 rpm) to eliminate 700 mg L-1 lead (120 h) and phenol (168 h) from synthetic wastewater. The derived biochars physicochemical properties of were studied. According to adsorption capacity (qe), consortium-SHB composites and consortium-RSB composites removed lead completely (70 mg g-1) within 48 h and 66 h, respectively. Besides, phenol was remediated entirely after 42 h and 48 h by both composite systems (69.90 mg g-1), respectively, comparing with bacterial consortium only or parent SHB and RSB. Moreover, four kinetic models were studied to describe the bioremediation process. Fractional power and Elovich models could be recommended for describing the adsorption kinetics for lead and phenol removal by the studied biomaterials with high correlation coefficient (R2 ≥ 0.91 for Pb2+ and ≥ 0.93 for phenol) and lower residual root mean square error (RMSE) and chi-square (X2). Overall, bacterial consortium-biochar composites exhibited greater remediation of lead and phenol than the sum of each single bacterial consortium and biochar systems; reflecting synergistic interaction of adsorptive capability of biochar and metabolic performance of bacterial consortium, as denoted by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The current study addressed the successful design of employing functional remediating consortium immobilized on waste biomass-derived biochar as a conducive alternative eco-sorbent and economic platform to detoxify organic and inorganic pollutants.

Magnetic Hydrogel Beads as a Reusable Adsorbent for Highly Efficient and Rapid Removal of Aluminum: Characterization, Response Surface Methodology Optimization, and Evaluation of Isotherms, Kinetics, and Thermodynamic Studies

Biopolymers such as alginate and gelatin have attracted much attention because of their exceptional adsorption properties and biocompatibility. The magnetic hydrogel beads produced and used in this study had a core structure composed of magnetite nanoparticles and gelatin and a shell structure composed of alginate. The combination of the metal-ion binding ability of alginate and the mechanical strength of gelatin in magnetic hydrogel beads presents a new approach for the removal of metal from water sources. The beads were designed for aluminum removal and fully characterized using various methods, including Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy-energy-dispersive X-ray spectroscopy, vibrating sample magnetometry, microcomputed tomography, and dynamic mechanical analysis. Statistical experimental designs were employed to optimize the parameters of the adsorption and recovery processes. Plackett-Burman Design, Box-Behnken Design, and Central Composite Design were used for identifying the significant factors and optimizing the parameters of the adsorption and recovery processes, respectively. The optimum parameters determined for adsorption are as follows: pH: 4, contact time: 30 min, adsorbent amount: 600 mg; recovery time: reagent 1 M HNO3; and contact time: 40 min. The adsorption process was described by using the Langmuir isotherm model. It reveals a homogeneous bead surface and monolayer adsorption with an adsorption capacity of 5.25 mg g-1. Limit of detection and limit of quantification values were calculated as 4.3 and 14 μg L-1, respectively. The adsorption process was described by a pseudo-second-order kinetic model, which assumes that chemisorption is the rate-controlling mechanism. Thermodynamic studies indicate that adsorption is spontaneous and endothermic. The adsorbent was reusable for 10 successive adsorption-desorption cycles with a quantitative adsorption of 98.2% ± 0.3% and a recovery of 99.4% ± 2.6%. The minimum adsorbent dose was determined as 30 g L-1 to achieve quantitative adsorption of aluminum. The effects of the inorganic ions were also investigated. The proposed method was applied to tap water and carboy water samples, and the results indicate that magnetic hydrogel beads can be an effective and reusable bioadsorbent for the detection and removal of aluminum in water samples. The recovery values obtained by using the developed method were quantitative and consistent with the results obtained from the inductively coupled plasma optical emission spectrometer.

Preparation of sulfur self-doped coal-based adsorbent and its adsorption performance for Cu2

The limited application of high-sulfur coal (HSC) and the increasing severity of copper pollution in solution are two pressing issues. To alleviate such issues, a sulfur self-doped coal-based adsorbent (HSC@ZnCl2) was obtained by pyrolysis (850 °C, 60 min holding time) of HSC and ZnCl2 with a mass ratio of 1:0.5. The results adsorption experiment revealed that the endothermic and spontaneous adsorption process was consistent with the Sips isothermal model (R2 = 0.992) and pseudo-second-order kinetic (R2 = 0.994), and that the adsorption process with a maximum adsorption capacity of 11.97 mg/g. Meanwhile, the adsorption of Cu2+ onto HSC@ZnCl2 was a result of the synergistic effects of various interactions, such as the complexation by oxygen-containing functional groups, electrostatic attraction and surface precipitation by ZnS on the adsorbent surface, and the process also included redox reaction. The findings of this work indicate that the preparation of sulfur self-doped coal-based adsorbent prepared from high-sulfur coal is a promising method for its large-scale utilization.

Interaction of antidiabetic formulation with nanoplastics and its binary influence on plasma protein

Nanoplastics exposure to humans becomes inevitable due to its prevalence and permanence. Adsorption of emerging pollutant metformin hydrochloride (Met-HCl) -antidiabetic drug, on polystyrene nanoplastics (PSNPs) and influence on plasma protein binding was investigated. Fluorescence studies were carried out for human serum albumin (HSA) binding. Adsorption follows pseudo-second-order kinetics, intraparticle-diffusion, and Langmuir isotherm, undergoing both physisorption and chemisorption which was validated by FE-SEM, FTIR, and HRMS measurements. Complex, experiences static quenching mechanism by hydrogen bonding and VanderWaals force of attraction to HSA. FTIR confirms the secondary structural alteration of HSA. Since Met-HCl covers the NPs' surface, NPs' affinity for HSA is reduced and they might reach the target organs of Met-HCl, disrupt antidiabetic mechanisms and cause far-reaching implications. Results from molecular docking and simulation studies backed up these results as hydrophobic and hydrogen bonds dominate the binding process of the HSA-Met-HCl-PSNPs complex. This work will aid in understanding of the toxico-kinetics/dynamics of binary contaminants.

Copper biosorption by Bacillus pumilus OQ931870 and Bacillus subtilis OQ931871 isolated from Wadi Nakheil, Red Sea, Egypt

BACKGROUND

Despite being necessary, copper is a toxic heavy metal that, at high concentrations, harms the life system. The parameters that affect the bioreduction and biosorption of copper are highly copper-resistant bacteria.

RESULTS

In this work, the ability of the bacterial biomass, isolated from black shale, Wadi Nakheil, Red Sea, Egypt, for Cu2+ attachment, was investigated. Two Cu2+ resistance Bacillus species were isolated; Bacillus pumilus OQ931870 and Bacillus subtilis OQ931871. The most tolerant bacterial isolate to Cu2+ was B. pumilus. Different factors on Cu2+ biosorption were analyzed to estimate the maximum conditions for Cu biosorption. The qmax for Cu2+ by B. pumilus and B. subtilis determined from the Langmuir adsorption isotherm was 11.876 and 19.88 mg. g-1, respectively. According to r2, the biosorption equilibrium isotherms close-fitting with Langmuir and Freundlich model isotherm. Temkin isotherm fitted better to the equilibrium data of B. pumilus and B. subtilis adsorption. Additionally, the Dubinin-Radushkevich (D-R) isotherm suggested that adsorption mechanism of Cu2+ is predominately physisorption.

CONCLUSION

Therefore, the present work indicated that the biomass of two bacterial strains is an effective adsorbent for Cu2+ removal from aqueous solutions.

Valorization of Fibrous Plant-Based Food Waste as Biosorbents for Remediation of Heavy Metals from Wastewater-A Review

Mobilization of heavy metals in the environment has been a matter of concern for several decades due to their toxicity for humans, environments, and other living organisms. In recent years, use of inexpensive and abundantly available biosorbents generated from fibrous plant-based food-waste materials to remove heavy metals has garnered considerable research attention. The aim of this review is to investigate the applicability of using fibrous plant-based food waste, which comprises different components such as pectin, hemicellulose, cellulose, and lignin, to remove heavy metals from wastewater. This contribution confirms that plant-fiber-based food waste has the potential to bind heavy metals from wastewater and aqueous solutions. The binding capacities of these biosorbents vary depending on the source, chemical structure, type of metal, modification technology applied, and process conditions used to improve functionalities. This review concludes with a discussion of arguments and prospects, as well as future research directions, to support valorization of fibrous plant-based food waste as an efficient and promising strategy for water purification.

Insights into brewed tea waste as a green and low-priced adsorbent for solid-phase extraction of Cd(II) ions: isotherm, kinetic, and artificial neural network approach

In the present research, brewed tea waste (BTW) was utilized as a green, low-priced, and abundant adsorbent for separation/preconcentration of Cd(II) ions through solid-phase extraction method from water and foods for the first time. BTW was applied as a natural adsorbent, without using any chelating agent to bind Cd(II) ions or any chemical reagent for its modification. A three-layer artificial neural network model using backpropagation algorithm was utilized to explicate a prediction model for the extraction performance of Cd(II) ions by selecting the input parameters as solution pH, quantity of BTW, sample volume, eluent concentration and volume, and equilibrium time for desorption. The preconcentration factor, relative standard deviation, and detection limit were attained as 100, 3.03%, and 0.56 µg L−1, respectively. It was decided that the Langmuir isotherm model is acceptable to characterize the retention of Cd(II) ions on BTW. This result pointed out that the active binding sites on the BTW surface are homogeneously distributed. Adsorption capacity of BTW was achieved as 41.5 mg g−1 which is higher than several expensive and difficult-to-prepare adsorbents. Adsorption kinetics was elucidated by pseudo-second order kinetic model. After confirmed the accuracy of the method with spike/recovery studies, it was employed for Cd(II) determination in water (stream and sea water) and food (eggplant, lettuce, parsley, apple, and apricot) samples with high accuracy. The inferences of the study proved that the BTW offers a magnificent application prospect in the extraction of Cd(II) ions.

Equilibrium and Thermodynamic Studies on the Biosorption of Lead (II) by Living and Nonliving Biomass of Penicillium notatum

This study aims to investigate the biosorption of Pb (II) by living and nonliving biomass of Penicillium notatum. Penicillium notatum PTCC 5074 was purchased from Iran Scientific-Industrial Research Organization in lyophilized form and after culturing in potato dextrose agar was propagated in Sabouraud dextrose broth medium. The highest adsorption by living and nonliving biomass (180.74 and 187.08 mg/g per dry weight of biomass, respectively) was at the Pb (II) concentration of 228 mg/L and ionic strength of 43 mg/L in terms of Ca2+ and 1.2 g/L biomass concentration. The optimum contact time and temperature in nonliving biomass were 37 hours and 32.5°C, respectively. Kinetic studies showed that Pb(II) adsorption in both cases follows a pseudo-second-order reaction. The adsorption process was consistent with the Langmuir model in the nonliving state, whereas the favourite models for the living state were Langmuir and Freundlich. Thermodynamic constants indicated that the adsorption process by nonliving and living biomass were exothermic and endothermic, respectively. The obtained results showed that Penicillium notatum in living and nonliving states is suitable for the development of an efficient and economic biosorbent for the removal of Pb (II) from aqueous environments.

Lignocellulosic Biomass as Sorbent for Fluoride Removal in Drinking Water

Water supply to millions of people worldwide is of alarmingly poor quality. Supply sources are depleting, whereas demand is increasing. Health problems associated with water consumption exceeding 1.5 mg/L of fluoride are a severe concern for the World Health Organization (WHO). Therefore, it is urgent to research and develop new technologies and innovative materials to achieve partial fluoride reduction in water intended for human consumption. The new alternative technologies must be environmentally friendly and be able to remove fluoride at the lowest possible costs. So, the use of waste from lignocellulosic biomasses provides a promising alternative to commercially inorganic-based adsorbents-published studies present bioadsorbent materials competing with conventional inorganic-based adsorbents satisfactorily. However, it is still necessary to improve the modification methods to enhance the adsorption capacity and selectivity, as well as the reuse cycles of these bioadsorbents.

Thermodynamic valorisation of lignocellulosic biomass green sorbents for toxic pollutants removal

Various toxic heavy metals have become hazardous to human health as well as the environment. This research has been focused on a biosorption/bioremoval process of chromium (III), copper (II) and lead (II) ions from an aqueous solution by utilizing lignocellulosic biomass of Citrus limon peel (CLP) powder. CLP powder biomass was selected based on dietary fibre components having greater potential to remove target heavy metal ions in order to purify wastewater by following the eco-friendly biosorption method. At optimum conditions, the observed maximum removal efficiency of 97.47, 87.13 and 95.71% for Cr, Cu and Pb ions, respectively, was observed. An investigation has been made as a work of pH, CLP amount and temperature. The presented bio-removal processes by prepared CLP biosorbent manifested as a temperature-independent. Langmuir isotherm model was found an excellent fit of the isotherm data for tested systems with the calculated biosorption capacities of 111.11 (Cr), 76.92 (Cu) and 100 (Pb) mg/g. The positive ΔH values for selected target heavy metal ions, except lead ions, confirmed that the reaction was spontaneous and endothermic. A cooperative mechanism of second-order and intraparticle diffusion models during the adsorption processes of all three target ions was established with a higher coefficient of determination and more closely anticipated take-up (adsorption capacity). Furthermore, the interaction of -OH and -COOH functional groups of CLP that have a major role in the removal of Cr, Cu and Pb ions from single-ion aqueous solution and/or a surface biosorption was confirmed based on the results presented by SEM-EDS and FTIR analysis. Analysis from XRD revealed peak corresponding to amorphous cellulose type I as observed by FT-IR analysis.