Superlative photoelectrochemical properties of 3D MgCr-LDH nanoparticles influencing towards photoinduced water splitting reactions

Ultrathin High-Entropy Fe-Based Spinel Oxide Nanosheets with Metalloid Band Structures for Efficient Nitrate Reduction toward Ammonia

Spinel oxides with tunable chemical compositions have emerged as versatile electrocatalysts, however their performance is greatly limited by small surface area and low electron conductivity. Here, ultrathin high-entropy Fe-based spinel oxides nanosheets are rationally designed (i.e., (Co0.2Ni0.2Zn0.2Mg0.2Cu0.2)Fe2O4; denotes A5Fe2O4) in thickness of ≈4.3 nm with large surface area and highly exposed active sites via a modified sol-gel method. Theoretic and experimental results confirm that the bandgap of A5Fe2O4 nanosheets is significantly smaller than that of ordinary Fe-based spinel oxides, realizing the transformation of binary spinel oxide from semiconductors to metalloids. As a result, such A5Fe2O4 nanosheets manifest excellent performance for the nitrate reduction reaction (NO3 -RR) to ammonia (NH3), with a NH3 yield rate of ≈2.1 mmol h-1 cm-2 at -0.5 V versus Reversible hydrogen electrode, outperforming other spinel-based electrocatalysts. Systematic mechanism investigations reveal that the NO3 -RR is mainly occurred on Fe sites, and introducing high-entropy compositions in tetrahedral sites regulates the adsorption strength of N and O-related intermediates on Fe for boosting the NO3 -RR. The above findings offer a high-entropy platform to regulate the bandgap and enhance the electrocatalytic performance of spinel oxides.

Insight into the In-Situ Encapsulation-Reassembly Strategy To Fabricate PW12@NiCo-LDH Acid-Base Bifunctional Catalysts

Acid-base bifunctional catalysts have attracted increasing attention due to the improved overall efficiency of synthetic reactions. Herein, we reported the successful fabrication of a PW₁₂@NiCo-LDH acid-base bifunctional catalyst by using the in-situ encapsulation-reassembly strategy. The evolution process of morphology and structure was monitored carefully by various time-dependent characterizations. X-ray absorption fine structure (XAFS) and density functional theory (DFT) calculations demonstrated that the terminal oxygen of PW₁₂ in PW₁₂@NiCo-LDH preferred to assemble with the oxygen vacancies on NiCo-LDH. When applied for deacetalization-Knoevenagel condensation, the PW₁₂@NiCo-LDH displayed >99% conversion of benzaldehyde dimethyl acetal (BDMA) and >99% yield of ethyl α-cyanocinnamate (ECC). Moreover, PW₁₂@NiCo-LDH can be recycled at least 10 cycles without obvious structural change, which can be attributed to the confinement of PW₁₂ into the NiCo-LDH nanocage. Such excellent catalytic activity of PW₁₂@NiCo-LDH was benefited from the short mass transfer pathway between acid sites and base sites, which was caused by the stable assembly between PW₁₂ and NiCo-LDH.

Potassium Poly(heptazine imide) Coupled with Ti3C2 MXene-Derived TiO2 as a Composite Photocatalyst for Efficient Pollutant Degradation

The photocatalytic degradation of pollutants is an effective and sustainable way to solve environmental problems, and the key is to develop an efficient, low-cost, and stable photocatalyst. Polymeric potassium poly(heptazine imide) (K-PHI), as a new member of the carbon nitride family, is a promising candidate but is characterized by a high charge recombination rate. To solve this problem, K-PHI was in-situ composited with MXene Ti₃C₂-derived TiO₂ to construct a type-II heterojunction. The morphology and structure of composite K-PHI/TiO₂ photocatalysts were characterized via different technologies, including TEM, XRD, FT-IR, XPS, and UV-vis reflectance spectra. Robust heterostructures and tight interactions between the two components of the composite were verified. Furthermore, the K-PHI/TiO₂ photocatalyst showed excellent activity for Rhodamine 6G removal under visible light illumination. When the weight percent of K-PHI in the original mixture of K-PHI and Ti₃C₂ was set to 10%, the prepared K-PHI/TiO₂ composite photocatalyst shows the highest photocatalytic degradation efficiency as high as 96.3%. The electron paramagnetic resonance characterization indicated that the^·OH radical is the active species accounting for the degradation of Rhodamine 6G.

Indulgent of the physiochemical features of MgCr-LDH nanosheets towards photodegradation process of methylene blue

In the present work, we report the preparatory strategy of MgCr-layered double hydroxide (LDH) nanosheets with 90% degree of delamination by employing a formamide-assisted co-precipitation and mild hydrothermal route for the degradation of methylene blue (MB) under solar light exposure. The as-synthesized MgCr-LDH nanosheets were characterized by assorted characterization techniques such as powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), Raman, thermogravimetric analysis (TGA), N₂ adsorption-desorption measurement, X-ray photoelectron spectroscopy (XPS) and UV-Visible diffused reflectance spectroscopy (UV-DRS). The XRD pattern of MgCr-LDH nanosheets quantified the strain (ε) and dislocation density (δ) of 1.371 lines^-2 m^-4 and 0.5723 lines m^-2 related to the (110) plane with d-spacing value of 1.6169 Ȧ. With a minimum band gap of ∼2.63 eV, the as-synthesized MgCr-LDH nanosheets displayed 90.6% MB photodegradation under the experimental protocols such as catalyst dosage of 30 mg/L, initial MB concentrations of 20 ppm, pH of 7 and time duration of 2 h under solar light exposure. Further, the recyclability test of the photocatalyst signifies material stability up to four successive cycles with 90% retention of MB degradation under sunlight exposure. The superior catalytic performances of the MgCr-LDH nanosheets could be ascertained to the suppression of excitonic recombination and effective light harvestation properties, synergistically contributed by the porous structural aspects via association of uni/multi-lamellar nanosheets, surface defect sites and photoactive Cr³⁺ cations. Additionally, the surface -OH groups of LDH contributed towards the generation of ^•OH radicals for triggering the catalytic performances. This type of work advances the novel ideas for establishing highly potent photocatalysts via synergizing structural and surface properties, paving towards effective wastewater treatment.

Synthesis, properties, and application of the new nanocatalyst of double layer hydroxides in the one-pot multicomponent synthesis of 2-amino-3-cyanopyridine derivatives

A new heterogeneous nanocatalyst LDH@3-chloropyltrimethoxysilane@1,3-benzenedisulfonyl amine@Cu (LDH@TRMS@BDSA@Cu) was synthesized and confirmed by analyzes such as Fourier transform infrared spectroscopy, Field Emission Scanning Electron Microscopy, energy scattered X-ray spectroscopy (EDX), elemental mapping, X-ray diffraction analysis, heat gravity/heat derivatization (TGA) and differential scanning calorimetry. The newly synthesized nanocatalyst effectively catalyzed the reaction between different aryl aldehydes, malononitrile, different acetophenones and ammonium acetate in solvent-free conditions and they were converted into 2-amino-3-cyanopyridine derivatives with high efficiency. The reaction showed advantages such as simplicity, high stability, environmental friendliness, excellent efficiency and short time. Also, this catalyst is recyclable and was recycled 4 times without losing significant catalytic power.