Optical photothermal infrared spectroscopy with simultaneously acquired Raman spectroscopy for two-dimensional microplastic identification

Upgrading and Enhancement of Recycled Polyethylene Terephthalate with Chain Extenders: In-Depth Material Characterization

Chemical chain extenders (CEs) can be used to restore the properties of recycled low-molecular-weight polyethylene terephthalate (PET). The aim of this work is to investigate the influence of the type and concentration of the CEs Joncryl and pyromellitic dianhydride (PMDA) on the viscosity and other rheological properties with a unique combination of different methods based on industrial samples originating from recycled PET bottles and trays. The resulting chain-extended thermoplastics were characterized by a combination of differential scanning calorimetry, viscometry, cone plate rheometry, pyrolysis-gas chromatography-mass spectroscopy, optical photothermal infrared spectroscopy, 13C solid-state- and 1H NMR liquid spectroscopy, and size exclusion chromatography. For a recycled PET mixture containing bottle and tray materials, our investigations have shown that a significantly better effect for chain elongation can be achieved with Joncryl compared to PMDA. This can presumably be attributed to water molecules formed during the use of PMDA, which accelerate the degradation of PET. The storage modulus values are therefore significantly higher for the samples with Joncryl compared to PMDA. The results of this study show that chain extension with Joncryl proceeds better compared to the reaction with PMDA.

Selective visual staining of polyurethane microplastics by novel colorimetric and near-infrared (NIR) fluorescent dye: Application to environmental water and natural soil samples

Microplastics can cause environmental pollution and ecosystem destruction as well as human health problems. Among the types of microplastics, polyurethane (PU) is particularly resistant to heat and difficult to decompose, causing disposal problems, and is evaluated as one of the most hazardous polymers. We present a novel colorimetric and near-infrared (NIR) fluorescence dye, (E)-N-(2-((4-(diphenylamino)benzylidene)amino)phenyl)- 7-nitrobenzo[c][1,2,5]oxadiazol-4-amine (DPNA), designed for selective visual PU microplastic staining. The intramolecular charge transfer (ICT) properties of DPNA are demonstrated through density functional theory (DFT) calculations along with solvatochromic shift. DPNA exhibits red color and red fluorescence emission, showing promising potential as a staining dye. To achieve selective PU microplastic staining, we establish an optimized experimental procedure with the staining dye DPNA by evaluating the staining efficiency under different staining solvent compositions and staining times. DPNA can distinguish PU by both red fluorescence signal and red coloration among different types of microplastics. In addition, DPNA well stain fresh PUs with diverse sizes and at various pH range of 5-9, and the aged PUs can also be dyed as effectively as the fresh PU. Most importantly, DPNA selectively stains PU among 11 types of microplastics and 5 types of natural particles in environmental water and soil with and without any pre-treatments. The adsorption mechanism of DPNA on PU microplastic is demonstrated through field emission scanning electron microscopes (FE-SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and non-covalent interaction (NCI)-reduced density gradient (RDG) analyses, and proposed that intermolecular hydrogen bonding has a significant effect.

Challenges and Recent Analytical Advances in Micro/Nanoplastic Detection

Despite growing ecological concerns, studies on microplastics and nanoplastics are still in their initial stages owing to technical hurdles in analytical techniques, especially for nanoplastics. We provide an overview of the general attributes of micro/nanoplastics in natural environments and analytical techniques commonly used for their analysis. After demonstrating the analytical challenges associated with the identification of nanoplastics due to their distinctive characteristics, we discuss recent technological advancements for detecting nanoplastics.

Baking releases microplastics from polyethylene terephthalate bakeware as detected by optical photothermal infrared and quantum cascade laser infrared

The use of plastic bakeware is a potential source of human exposure to microplastics (MPs). However, characterizing MPs remains a challenge. This study aims to employ optical photothermal infrared (O-PTIR) and quantum cascade laser infrared (QCL-IR) technology to characterise polyethylene terephthalate (PET) MPs shed from PET bakeware during the baking process. The bakeware, filled with ultrapure water, underwent baking cycles at 220 °C for 20 min, 60 min, and three consecutive cycles of 60 min each. Subsequently, particles present in the ultrapure water were collected using an Al2O3 filter. O-PTIR and QCL-IR were used to characterise PET MPs collected from the filtration. Analysis revealed that QCL-IR spectra exhibited broader absorption peaks, compared to O-PTIR. Notably, MP spectra obtained from both techniques displayed common absorption peaks around 1119, 1623, 1341 and 1725 cm-1. The dominant size of PET MPs detected by O-PTIR and QCL-IR was 1-3 μm and 5-20 μm, respectively. The quantity of identified PET MPs using O-PTIR was 18 times greater than that with QCL-IR, which was attributed to variations in spatial resolution, sampling methods for spectra collection, and data analysis employed by the two methods. Importantly, findings from both techniques highlighted a notably large quantity of MPs released from PET bakeware, particularly evident after 3 cycles of 60 min of baking, suggesting a substantial increase in the potential ingestion of MPs, especially in scenarios involving extended baking durations. The research outcomes will guide consumers on minimizing the intake of microplastics by using PET bakeware for shorter baking time. Additionally, the study will yield valuable insights into the application of O-PTIR and QCL-IR for MPs detection, potentially inspiring advancements in MPs detection methodologies through cutting-edge technologies.

Widely tunable fiber optical parametric oscillator synchronized with a Ti:sapphire laser for stimulated Raman scattering microscopy

Stimulated Raman scattering (SRS) microscopy is a powerful vibrational imaging technique with high chemical specificity. However, the insufficient tuning range or speed of light sources limits the spectral range of SRS imaging and, hence, the ability to identify molecular species. Here, we present a widely tunable fiber optical parametric oscillator with a tuning range of 1470 cm-1, which can be synchronized with a Ti:sapphire laser. By using the synchronized light sources, we develop an SRS imaging system that covers the fingerprint and C-H stretching regions, without balanced detection. We validate its broadband imaging capability by visualizing a mixed polymer sample in multiple vibrational modes. We also demonstrate SRS imaging of HeLa cells, showing the applicability of our SRS microscope to biological samples.

Analysing micro- and nanoplastics with cutting-edge infrared spectroscopy techniques: a critical review

The escalating prominence of micro- and nanoplastics (MNPs) as emerging anthropogenic pollutants has sparked widespread scientific and public interest. These minuscule particles pervade the global environment, permeating drinking water and food sources, prompting concerns regarding their environmental impacts and potential risks to human health. In recent years, the field of MNP research has witnessed the development and application of cutting-edge infrared (IR) spectroscopic instruments. This review focuses on the recent application of advanced IR spectroscopic techniques and relevant instrumentation to analyse MNPs. A comprehensive literature search was conducted, encompassing articles published within the past three years. The findings revealed that Fourier transform infrared (FTIR) spectroscopy stands as the most used technique, with focal plane array FTIR (FPA-FTIR) representing the cutting edge in FTIR spectroscopy. The second most popular technique is quantum cascade laser infrared (QCL-IR) spectroscopy, which has facilitated rapid analysis of plastic particles. Following closely is optical photothermal infrared (O-PTIR) spectroscopy, which can furnish submicron spatial resolution. Subsequently, there is atomic force microscopy-based infrared (AFM-IR) spectroscopy, which has made it feasible to analyse MNPs at the nanoscale level. The most advanced IR instruments identified in articles covered in this review were compared. Comparison metrics encompass substrates/filters, data quality, spatial resolution, data acquisition speed, data processing and cost. The limitations of these IR instruments were identified, and recommendations to address these limitations were proposed. The findings of this review offer valuable guidance to MNP researchers in selecting suitable instrumentation for their research experiments, thereby facilitating advancements in research aimed at enhancing our understanding of the environmental and human health risks associated with MNPs.

Analysis of micro(nano)plastics based on automated data interpretation and modeling: A review

The widespread presence of micro(nano)plastics (MNPs) in the environment threatens ecosystem integrity, and thus, it is necessary to determine and assess the occurrence, characteristics, and transport of MNPs between ecological components. However, most analytical approaches are cost- and time-inefficient in providing quantitative information with sufficient detail, and interpreting results can be difficult. Alternative analyses integrating novel measurements by imaging or proximal sensing with signal processing and machine learning may supplement these approaches. In this review, we examined published research on methods used for the automated data interpretation of MNPs found in the environment or those artificially prepared by fragmenting bulk plastics. We critically reviewed the primary areas of the integrated analytical process, which include sampling, data acquisition, processing, and modeling, applied in identifying, classifying, and quantifying MNPs in soil, sediment, water, and biological samples. We also provide a comprehensive discussion regarding model uncertainties related to estimating MNPs in the environment. In the future, the development of routinely applicable and efficient methods is expected to significantly contribute to the successful establishment of automated MNP monitoring systems.

Quantification of Polystyrene Uptake by Different Cell Lines Using Fluorescence Microscopy and Label-Free Visualization of Intracellular Polystyrene Particles by Raman Microspectroscopic Imaging

Environmental pollution caused by plastic is a present problem. Polystyrene is a widely used packaging material (e.g., Styrofoam) that can be broken down into microplastics through abrasion. Once the plastic is released into the environment, it is dispersed by wind and atmospheric dust. In this study, we investigated the uptake of polystyrene particles into human cells using A549 cells as a model of the alveolar epithelial barrier, CaCo-2 cells as a model of the intestinal epithelial barrier, and THP-1 cells as a model of immune cells to simulate a possible uptake of microplastics by inhalation, oral uptake, and interaction with the cellular immune system, respectively. The uptake of fluorescence-labeled beads by the different cell types was investigated by confocal laser scanning microscopy in a semi-quantitative, concentration-dependent manner. Additionally, we used Raman spectroscopy as a complementary method for label-free qualitative detection and the visualization of polystyrene within cells. The uptake of polystyrene beads by all investigated cell types was detected, while the uptake behavior of professional phagocytes (THP-1) differed from that of adherent epithelial cells.

Microplastic pollution in landfill soil: Emerging threats the environmental and public health

Insufficient knowledge about the decomposition of microplastics from plastic waste in landfills hinders community involvement in waste management and sorting, posing a new threat to the environment and public health. The present study identifies, characterizes, and quantifies the microplastics in landfills soil sample to determine the latest threats posed by microplastics in the environment, particularly in landfills that are close to residential areas. This research is a descriptive study, with soil samples taken from six points in landfill site in Depok City. The abundance and shape of microplastics were characterized using a microscope, while the microplastic types were identified using Fourier Transform Infrared Spectroscopy (FTIR). The results showed that the abundance of microplastics in the Depok City landfill soil was 60,111.67 particles/kg, with the largest percentage being fragments at 63 %. FTIR functional group characterization showed the presence of plastic types, such as Polyethylene (PE), Polyvinyl Chloride (PVC), Polystyrene (PS), Polypropylene (PP), Polyethylene Terephthalate (PET), and Polyamide. The differences in waste types entering the Depok Landfill caused variations in the number, shape, and type of microplastic samples, and this study provides a foundation for mitigating and biodegrading microplastics in the landfill to minimize environmental impact and protect public health.

Monitoring the synthesis of neutral lipids in lipid droplets of living human cancer cells using two-color infrared photothermal microscopy

There has been growing interest in the functions of lipid droplets (LDs) due to recent discoveries regarding their diverse roles. These functions encompass lipid metabolism, regulation of lipotoxicity, and signaling pathways that extend beyond their traditional role in energy storage. Consequently, there is a need to examine the molecular dynamics of LDs at the subcellular level. Two-color infrared photothermal microscopy (2C-IPM) has proven to be a valuable tool for elucidating the molecular dynamics occurring in LDs with sub-micrometer spatial resolution and molecular specificity. In this study, we employed the 2C-IPM to investigate the molecular dynamics of LDs in both fixed and living human cancer cells (U2OS cells) using the isotope labeling method. We investigated the synthesis of neutral lipids occurring in individual LDs over time after exposing the cells to excess saturated fatty acids while simultaneously comparing inherent lipid contents in LDs. We anticipate that these research findings will reveal new opportunities for studying lesser-known biological processes within LDs and other subcellular organelles.

Optical photothermal infrared spectroscopy and discrete wavenumber imaging for high content screening of single cells

Major drawbacks of direct mid-infrared spectroscopic imaging of single cells in an aqueous buffer are strong water absorption, low resolution typically above 10 μm, and Mie scattering effects. This study demonstrates how an indirect detection principle can overcome these drawbacks using the optical photothermal infrared (O-PTIR) technique for high-resolution discrete wavenumber imaging and fingerprint spectroscopy of cultivated cells as a model system in a simple liquid sample chamber. The O-PTIR spectra of six leukemia- and cancer-derived cell lines showed main IR bands near 1648, 1547, 1447, 1400, 1220, and 1088 cm-1. Five spectra of approximately 260 single cells per cell type were averaged, the O-PTIR data set was divided into leukemia-derived cells (THP-1, HL 60, Jurkat, and Raji) and cancer cells (HeLa and HepaRG), and partial least squares linear discriminant analysis (PLS-LDA) was applied in the spectral range 800-1800 cm-1 to train three classification models. A leukemia versus cancer cell model showed an accuracy of 90.0%, the HeLa versus HepaRG cell model had an accuracy of 95.4%, and the model for the distinction of leukemia cells had an accuracy of 75.4%. IR bands in linear discriminants (LDs) of the models were correlated with second derivative spectra that resolved more than 25 subbands. The IR and second derivative spectra of proteins, DNA, RNA and lipids were collected as references to confirm band assignments. O-PTIR images of single cells at a 200 nm step size were acquired at 1086, 1548, and 1746 cm-1 to visualize the nucleic acid, protein, and lipid distribution, respectively. Variations in subcellular features and in the lipid-to-protein and nucleic acid-to-protein ratios were identified that were consistent with biomolecular information in LDs. In conclusion, O-PTIR can provide high-quality spectra and images with submicron resolution of single cells in aqueous buffers that offer prospects in high-content screening applications.

Mechanical and Functional Improvement of β-TCP Scaffolds for Use in Bone Tissue Engineering

Autologous bone transplantation is still considered as the gold standard therapeutic option for bone defect repair. The alternative tissue engineering approaches have to combine good hardiness of biomaterials whilst allowing good stem cell functionality. To become more useful for load-bearing applications, mechanical properties of calcium phosphate materials have to be improved. In the present study, we aimed to reduce the brittleness of β-tricalcium phosphate (β-TCP). For this purpose, we used three polymers (PDL-02, -02a, -04) for coatings and compared resulting mechanical and degradation properties as well as their impact on seeded periosteal stem cells. Mechanical properties of coated and uncoated β-TCP scaffolds were analyzed. In addition, degradation kinetics analyses of the polymers employed and of the polymer-coated scaffolds were performed. For bioactivity assessment, the scaffolds were seeded with jaw periosteal cells (JPCs) and cultured under untreated and osteogenic conditions. JPC adhesion/proliferation, gene and protein expression by immunofluorescent staining of embedded scaffolds were analyzed. Raman spectroscopy measurements gave an insight into material properties and cell mineralization. PDL-coated β-TCP scaffolds showed a significantly higher flexural strength in comparison to that of uncoated scaffolds. Degradation kinetics showed considerable differences in pH and electrical conductivity of the three different polymer types, while the core material β-TCP was able to stabilize pH and conductivity. Material differences seemed to have an impact on JPC proliferation and differentiation potential, as reflected by the expression of osteogenic marker genes. A homogenous cell colonialization of coated and uncoated scaffolds was detected. Most interesting from a bone engineer's point of view, the PDL-04 coating enabled detection of cell matrix mineralization by Raman spectroscopy. This was not feasible with uncoated scaffolds, due to intercalating effects of the β-TCP material and the JPC-formed calcium phosphate. In conclusion, the use of PDL-04 coating improved the mechanical properties of the β-TCP scaffold and promoted cell adhesion and osteogenic differentiation, whilst allowing detection of cell mineralization within the ceramic core material.

Synchrotron science for sustainability: life cycle of metals in the environment

The movement of metals through the environment links together a wide range of scientific fields: from earth sciences and geology as weathering releases minerals; to environmental sciences as metals are mobilized and transformed, cycling through soil and water; to biology as living things take up metals from their surroundings. Studies of these fundamental processes all require quantitative analysis of metal concentrations, locations, and chemical states. Synchrotron X-ray tools can address these requirements with high sensitivity, high spatial resolution, and minimal sample preparation. This perspective describes the state of fundamental scientific questions in the lifecycle of metals, from rocks to ecosystems, from soils to plants, and from environment to animals. Key X-ray capabilities and facility infrastructure for future synchrotron-based analytical resources serving these areas are summarized, and potential opportunities for future experiments are explored.

Studying the concentration of polymers in blended microplastics using 2D and 3D Raman mapping

The combination of different polymers in the form of blended plastics has been used in the plastic industry for a long time. Nevertheless, analyses of microplastics (MPs) have been mainly limited to the study of particles made of single-type polymers. Accordingly, two members of the Polyolefins (POs) family, i.e., Polypropylene (PP) and Low-density Polyethylene (LDPE) are blended and extensively studied in this work due to their applications in industry as well as abundance in the environment. It is shown that 2-D Raman mapping only provides information about the surface of blended MPs (B-MPs). While complimentary 3-D volume analysis is needed to fully understand the presence of various polymers in such complex samples. Therefore, 3-D Raman mapping is applied to visualize the morphology of the distribution of polymers within the B-MPs together with the quantitative estimation of their concentrations. A parameter defined as the concentration estimate error (CEE) evaluates the precision of the quantitative analysis. Furthermore, the impact of four excitation wavelengths 405, 532, 633, and 785 nm is investigated on the obtained results. Finally, the application of a line-shaped laser beam profile (line-focus) is introduced for reducing the measurement time from 56 to 2 h.

Raman Spectroscopic Imaging of Human Bladder Resectates towards Intraoperative Cancer Assessment

Raman spectroscopy offers label-free assessment of bladder tissue for in vivo and ex vivo intraoperative applications. In a retrospective study, control and cancer specimens were prepared from ten human bladder resectates. Raman microspectroscopic images were collected from whole tissue samples in a closed chamber at 785 nm laser excitation using a 20× objective lens and 250 µm step size. Without further preprocessing, Raman images were decomposed by the hyperspectral unmixing algorithm vertex component analysis into endmember spectra and their abundancies. Hierarchical cluster analysis distinguished endmember Raman spectra that were assigned to normal bladder, bladder cancer, necrosis, epithelium and lipid inclusions. Interestingly, Raman spectra of microplastic particles, pigments or carotenoids were detected in 13 out of 20 specimens inside tissue and near tissue margins and their identity was confirmed by spectral library surveys. Hypotheses about the origin of these foreign materials are discussed. In conclusion, our Raman workflow and data processing protocol with minimal user interference offers advantages for future clinical translation such as intraoperative tumor detection and label-free material identification in complex matrices.

Selection Route of Precursor Materials in 3D Printing Composite Filament Development for Biomedical Applications

Additive manufacturing or 3D printing technologies might advance the fabrication sector of personalised biomaterials with high-tech precision. The selection of optimal precursor materials is considered the first key-step for the development of new printable filaments destined for the fabrication of products with diverse orthopaedic/dental applications. The selection route of precursor materials proposed in this study targeted two categories of materials: prime materials, for the polymeric matrix (acrylonitrile butadiene styrene (ABS), polylactic acid (PLA)); and reinforcement materials (natural hydroxyapatite (HA) and graphene nanoplatelets (GNP) of different dimensions). HA was isolated from bovine bones (HA particles size < 40 μm, <100 μm, and >125 μm) through a reproducible synthesis technology. The structural (FTIR-ATR, Raman spectroscopy), morphological (SEM), and, most importantly, in vitro (indirect and direct contact studies) features of all precursor materials were comparatively evaluated. The polymeric materials were also prepared in the form of thin plates, for an advanced cell viability assessment (direct contact studies). The overall results confirmed once again the reproducibility of the HA synthesis method. Moreover, the biological cytotoxicity assays established the safe selection of PLA as a future polymeric matrix, with GNP of grade M as a reinforcement and HA as a bioceramic. Therefore, the obtained results pinpointed these materials as optimal for future composite filament synthesis and the 3D printing of implantable structures.