Synthesis, characterization and potential sensing application of carbon dots synthesized via the hydrothermal treatment of cow milk

Aggregation induced emission "Turn on" ultra-low detection of anti-inflammatory drug flufenamic acid in human urine samples by carbon dots derived from bamboo stem waste

Carbon dot-based fluorescence sensors have attracted research interest for the selective determination of anti-inflammatory drugs in biological fluids and environments. The overdose and accumulation of anti-inflammatory drugs in tissues can cause chronic side effects including abdominal pain, and renal damage. Herein, we report a new fluorescent probe, bamboo stem waste-derived carbon dots (BS-CDs) for highly sensitive detection of Flufenamic acid (FA), a hazardous anti-inflammatory drug. The UV-vis absorption spectra of BS-CDs show a redshifted absorption peak at 283 nm upon the addition of FA suggesting strong binding interaction between BS-CDs and FA molecule. The BS-CDs showed a fluorescence enhancement (∼2-fold) detection for FA (400 μM) in the linear concentration range (0.40 → 0.65 μM) with a limit of detection (LoD; 17 nM) and binding constant (Ka = 1.33 × 10-3 M-1). The time-resolved fluorescence decay analysis showed that the average lifetime of BS-CDs has slightly changed (4.42 → 4.67 ns) by the interaction with FA through the aggregation-induced emission (AIE) process. The interference, pH, and effect of time results suggest that BS-CDs are highly selective probes for FA detection and do not show any interference involvement during FA detection. The confirmation of the structure and morphology changes of BS-CDs after interaction with FA was carried out by XRD, FESEM, HRTEM, FTIR, and Raman spectroscopy. The practicability of the BS-CDs probe was proved by the detection of FA in human urine samples with recovery of 103-109 %. This suggests that the proposed BS-CDs-based 'turn-on' sensor could be used to determine the FA in biological fluids.

Application of Carbon Quantum Dots Derived from Waste Tea for the Detection of Pesticides in Tea: A Novel Biosensor Approach

Chemical pesticide residues have negative consequences for human health and the environment. Prioritizing a detection method that is both reliable and efficient is essential. Our innovative research explored the application of biosensors based on carbon quantum dots (CQDs) derived from waste tea to detect commonly used pesticides in tea. CQDs have been synthesized using a simple one-pot hydrothermal approach and thoroughly characterized using advanced techniques such as high-resolution transmission electron microscopy, ultraviolet-visible spectroscopy, photoluminescence (PL) spectroscopy, Raman spectroscopy, X-ray diffraction, atomic force microscopy, and X-ray photoelectron spectroscopy. The fluorescence resonance energy transfer-based fluorescence "turn on-off" mechanism has been successfully employed to study the detection of four different pesticides, viz., quinalphos 25 EC, thiamethoxam 25 WG, propargite 57 EC, and hexaconazole 5 EC. The detection limits for quinalphos 25 EC, thiamethoxam 25 WG, and propargite 57 EC were determined to be 0.2, 1, and 10 ng/mL, respectively. Notably, these values are significantly lower than the maximum residue level for each pesticide. We achieved a strong linear correlation (R = -0.96) with a detection limit of 0.2 ng/mL for quinalphos 25 EC. The quantum yield was determined to be 40.05%. Our research demonstrates that the developed nanobiosensor reliably and accurately detects pesticides, including those present in experimental samples containing mixtures of pesticides.

Biomass-derived carbon dots as emerging visual platforms for fluorescent sensing

Biomass-derived carbon dots (CDs) are non-toxic and fluorescently stable, making them suitable for extensive application in fluorescence sensing. The use of cheap and renewable materials not only improves the utilization rate of waste resources, but it is also drawing increasing attention to and interest in the production of biomass-derived CDs. Visual fluorescence detection based on CDs is the focus of current research. This method offers high sensitivity and accuracy and can be used for rapid and accurate determination under complex conditions. This paper describes the biomass precursors of CDs, including plants, animal remains and microorganisms. The factors affecting the use of CDs as fluorescent probes are also discussed, and a brief overview of enhancements made to the preparation process of CDs is provided. In addition, the application prospects and challenges related to biomass-derived CDs are demonstrated.

Carbon Dot Synthesis in CYTOP Optical Fiber Using IR Femtosecond Laser Direct Writing and Its Luminescence Properties

Luminescent carbon dots (CDs) were locally synthesized in the core of CYTOP fibers using IR femtosecond laser direct writing (FLDW), a one-step simple method serving as a post-treatment of the pristine fiber. This approach enables the creation of several types of modifications such as ellipsoid voids. The CDs and photoluminescence (PL) distribute at the periphery of the voids. The PL spectral properties were studied through the excitation/emission matrix in the visible range and excitation/emission spectra in the UV/visible range. Our findings reveal the presence of at least three distinct luminescent species, facilitating a broad excitation range extending from UV to green, and light emission spanning from blue to red. The average laser power and dose influence the quantity and ratio of these luminescent CD species. Additionally, we measured the spatially resolved lifetime of the luminescence during and after the irradiation. We found longer lifetimes at the periphery of the laser-induced modified regions and shorter ones closer to the center, with a dominant lifetime ~2 ns. Notably, unlike many other luminophores, these laser-induced CDs are insensitive to oxygen, enhancing their potential for display or data storage applications.

Fluorescent Nanocarbons: From Synthesis and Structure to Cancer Imaging and Therapy

Nanocarbons are emerging at the forefront of nanoscience, with diverse carbon nanoforms emerging over the past two decades. Early cancer diagnosis and therapy, driven by advanced chemistry techniques, play a pivotal role in mitigating mortality rates associated with cancer. Nanocarbons, with an attractive combination of well-defined architectures, biocompatibility, and nanoscale dimension, offer an incredibly versatile platform for cancer imaging and therapy. This paper aims to review the underlying principles regarding the controllable synthesis, fluorescence origins, cellular toxicity, and surface functionalization routes of several classes of nanocarbons: carbon nanodots, nanodiamonds, carbon nanoonions, and carbon nanohorns. This review also highlights recent breakthroughs regarding the green synthesis of different nanocarbons from renewable sources. It also presents a comprehensive and unified overview of the latest cancer-related applications of nanocarbons and how they can be designed to interface with biological systems and work as cancer diagnostics and therapeutic tools. The commercial status for large-scale manufacturing of nanocarbons is also presented. Finally, it proposes future research opportunities aimed at engendering modifiable and high-performance nanocarbons for emerging applications across medical industries. This work is envisioned as a cornerstone to guide interdisciplinary teams in crafting fluorescent nanocarbons with tailored attributes that can revolutionize cancer diagnostics and therapy.

Microwave-assisted synthesis, characterization and in vitro biomedical applications of Hibiscus rosa-sinensis Linn.-mediated carbon quantum dots

In recent years, carbon quantum dots (CQDs) have garnered considerable attention as a promising material for biomedical applications because of their unique optical and biological properties. In this study, CQDs were derived from the leaves of Hibiscus rosa-sinensis Linn. via microwave-assisted technique and characterized using different techniques such as ultraviolet-visible, Fourier transform infrared, fluorescence spectrometry, X-ray diffraction, dynamic light scattering, transmission electron microscopy and energy-dispersive X-ray spectroscopy. Subsequently, their potential for biomedical applications was investigated through in vitro assays assessing scratch healing, anti-inflammatory, antibacterial, and cytotoxicity properties. It was found that the CQDs were fluorescent, polycrystalline, quasi-spherical, ~ 12 nm in size with presence of -OH and -COOH groups on their negatively charged surfaces, and demonstrated good anti-inflammatory by inhibiting protein denaturation, cyclooxygenase-2 and regulating inflammatory cytokines. The CQDs also exhibited antimicrobial activity against Klebsiella pneumoniae and Bacillus cereus, good biocompatibility, along with excellent promotion of cell proliferation in vitro, indicating their potential as a anti-inflammatory and wound healing material. The properties were more enhanced than their precursor, H. rosa-sinensis leaf extract. Hence, the CQDs synthesized from the leaves of H. rosa-sinensis can serve as a potential biomedical agent.

Exploring luminescent carbon dots derived from syrup bottle waste and curcumin for potential antimicrobial and bioimaging applications

In this study, we utilized a navel hybrid material, prepared by fusing fluorescent Carbon Dots SyCDs, derived from syrup bottles, with curcumin. This innovative approach not only offers significant advancements in antimicrobial activity and bioimaging but also represents a stride in sustainable and eco-friendly nanotechnology. The core of our study is the development of an efficient, cost-effective, and environmentally conscious method for synthesizing SyCDs. This is achieved by repurposing waste syrup bottles, thus addressing the pressing issue of plastic waste. The incorporation of curcumin, renowned for its biological properties, enhances the luminescent characteristics of SyCDs and augments their functionality. This combination overcomes the inherent limitations of curcumin when used in isolation. The hybrid material exhibits enhanced antimicrobial properties and proves to be a potent alternative to conventional fluorescent dyes for bioimaging, marking a substantial leap in the field of sustainable nanomaterials. Our work not only demonstrates the versatile applications of luminescent SyCDs in health and environmental science but also underscores the potential of sustainable approaches in addressing global environmental challenges. This study, represents a significant contribution to the domain of sustainable nanotechnology, highlighting the transformative power of integrating waste management with advanced material science.

Carbon dots-based fluorescent probe for the detection of imidacloprid residue in leafy vegetables

Consumption of leafy vegetables with excessive imidacloprid (IMI) can cause serious harm to the human body. To achieve rapid IMI detection, a carbon dots (CDs)-based fluorescent (FL) probe was hydrothermally prepared using O-phenylenediamine as the precursor. The morphology, particle size distribution, crystal structure, optics and chemical bond state of the as-prepared CDs were characterized. The mechanism of the CDs in detecting IMI was investigated by Fourier transform infrared spectroscopy, and the CDs' selectivity, stability, sensitivity, and actual sample recovery were tested. The CDs showed good selectivity, stability, and anti-interference ability. Under optimum conditions, there was a strong linear relationship between the FL intensity of the CDs and the IMI concentration in the range of 0.037-0.2 mg/L. The detection limit was 0.00187 mg/kg. The CDs were successfully applied to detect IMI in lettuce, cole, spinach, and pakchoi with spiked recoveries between 81.026% and 106.803% and a relative standard deviation between 0.001 and 0.027%.

Carbon-Based Nanostructures as Emerging Materials for Gene Delivery Applications

Gene therapeutics are promising for treating diseases at the genetic level, with some already validated for clinical use. Recently, nanostructures have emerged for the targeted delivery of genetic material. Nanomaterials, exhibiting advantageous properties such as a high surface-to-volume ratio, biocompatibility, facile functionalization, substantial loading capacity, and tunable physicochemical characteristics, are recognized as non-viral vectors in gene therapy applications. Despite progress, current non-viral vectors exhibit notably low gene delivery efficiency. Progress in nanotechnology is essential to overcome extracellular and intracellular barriers in gene delivery. Specific nanostructures such as carbon nanotubes (CNTs), carbon quantum dots (CQDs), nanodiamonds (NDs), and similar carbon-based structures can accommodate diverse genetic materials such as plasmid DNA (pDNA), messenger RNA (mRNA), small interference RNA (siRNA), micro RNA (miRNA), and antisense oligonucleotides (AONs). To address challenges such as high toxicity and low transfection efficiency, advancements in the features of carbon-based nanostructures (CBNs) are imperative. This overview delves into three types of CBNs employed as vectors in drug/gene delivery systems, encompassing their synthesis methods, properties, and biomedical applications. Ultimately, we present insights into the opportunities and challenges within the captivating realm of gene delivery using CBNs.

Optical behaviors of Mn4+-modified cubic type ZnTiO3:Eu3+ nanocrystals: Application in optical thermometers based on fluorescence intensity ratio and lifetime

Cubic type ZnTiO3 nanophosphors were fabricated by using hydrothermal method. The photoluminescence behaviors of Eu3+/Mn4+ co-doped ZnTiO3 crystals and Mn4+-modified ZnTiO3:Eu3+ crystals were investigated. The red and near-infrared emissions assigned to Eu3+ and Mn4+ were observed at the excitation wavelength of 465 nm for Eu3+/Mn4+ co-doped ZnTiO3 crystals and Mn4+ modified ZnTiO3:Eu3+ crystals. Eu3+/Mn4+ co-doped ZnTiO3 crystals revealed the most intense near-infrared emission assigned to Mn4+. For Mn4+-modified ZnTiO3:Eu3+ crystals, the red emissions assigned to Mn4+ revealed an obvious enhancement with the concentration of Mn4+ increasing from 0.01 mol% to 0.1 mol%, and then revealed a concentration quenching behavior at the Mn4+ concentration of 0.5 mol% and 1 mol%. Under 465 nm excitation wavelength, the emission assigned to 2Eg → 4A2g of Mn4+ in ZnTiO3 revealed stronger temperature dependence compared with that assigned to 5D0 → 7F2 transition of Eu3+. Based on the fluorescence intensity ratio between Eu3+ and Mn4+, the maximum relative sensitivity of 3.15 %/K at 305 K for the 0.05 mol% Mn4+ modified ZnTiO3:Eu3+ was achieved, which was higher than that of 2.9 %/K for Eu3+/Mn4+ co-doping ZnTiO3 nanocrystals. Based on the lifetime of the emission of Mn4+, the highest relative sensitivity of 1.4 %/K was obtained in the 0.05 mol% Mn4+ modified ZnTiO3:Eu3+, which was lower than that based on fluorescence intensity ratio. It indicated that the surface modification by transition metals should improve the temperatures sensing performance and had potential applications in optical thermometers.

An overview on animal/human biomass-derived carbon dots for optical sensing and bioimaging applications

Over the past decade, carbon dots (CDs) have emerged as some of the extremely popular carbon nanostructures for diverse applications. The advantages of sustainable CDs, characterized by their exceptional photoluminescence (PL), high water solubility/dispersibility, non-toxicity, and biocompatibility, substantiate their potential for a wide range of applications in sensing and biology. Moreover, nature offers plant- and animal-derived precursors for the sustainable synthesis of CDs and their doped variants. These sources are not only readily accessible, inexpensive, and renewable but are also environmentally benign green biomass. This review article presents in detail the production of sustainable CDs from various animal and human biomass through bottom-up synthetic methods, including hydrothermal, microwave, microwave-hydrothermal, and pyrolysis methods. The resulting CDs exhibit a uniform size distribution, possibility of heteroatom doping, surface passivation, and remarkable excitation wavelength-dependent/independent emission and up-conversion PL characteristics. Consequently, these CDs have been successfully utilized in multiple applications, such as bioimaging and the detection of various analytes, including heavy metal ions. Finally, a comprehensive assessment is presented, highlighting the prospects and challenges associated with animal/human biomass-derived CDs for multifaceted applications.

Facile Synthesis of Multifunctional Carbon Dots Derived from Camel Milk for Mn7+ Sensing and Antiamyloid and Anticancer Activities

Carbon dots (CDs) are promising biocompatible fluorescent nanoparticles mainly used in bioimaging, drug delivery, sensing, therapeutics, and various other applications. The utilization of natural sources and green synthetic approaches is resulting in highly biocompatible and nontoxic nanoparticles. Herein, we report an unprecedented facile and green synthesis of highly luminescent carbon dots derived from camel milk (CM) for sensing manganese (Mn7+) ions and for identifying the anticancer potential and antiamyloid activity against α-synuclein amyloids. α-Synuclein amyloid formation due to protein misfolding (genetic and environmental factors) has gained significant attention due to its association with Parkinson's disease and other synucleinopathies. The as-synthesized CM-CDs possess an average hydrodynamic diameter ranging from 3 to 15 nm and also exhibit strong photoluminescence (PL) emission in the blue region. The CM-CDs possess good water dispersibility, stable fluorescence under different physical states, and outstanding photostability. Moreover, the CM-CDs are validated as an efficient sensor for the detection of Mn7+ ions in DI water and in metal ion-polluted tap water. In addition, the CM-CDs have demonstrated a very good quantum yield (QY) of 24.6% and a limit of detection (LOD) of 0.58 μM for Mn7+ ions with no incubation time. Consequently, the exceptional properties of CM-CDs make them highly suitable for a diverse array of biomedical applications.

Green-derived carbon dots: A potent tool for biosensing in food safety

The impact of food contaminants on ecosystems and human health has attracted widespread global attention, and there is an urgent need to develop reliable food safety detection methods. Recently, carbon dots (CDs) have been considered as a powerful material to construct sensors for chemical analysis. Based on the concept of resource conversion and sustainable development, the use of natural, harmless, and renewable materials for the preparation of CDs without the involvement of chemical hazards is a current hot topic. This paper reviews the research progress of green-derived CDs and their application in food safety biosensing. The fabrications of green-derived CDs using various biomasses are described in detail, and the application of CDs especially the sensing mechanisms of photoluminescence, colorimetric, electrochemiluminescence and other sensors are provided. Finally, existing shortcomings and current challenges as well as prospects for food safety monitoring are discussed. We believe that this work provides strong insight into the application of CDs in the sensing of various contaminants.