Assessment of the water sources for potential channels of faecal contamination within Vhembe District Municipality using sanitary inspections and hydrogen sulphide test

[Ion chromatography-pulsed amperometry method for determination of trace hydrogen sulfide in air]

Hydrogen sulfide (H2S) is a pervasive gaseous pollutant that emits the characteristic odor of rotten gas, even at low concentrations. It is generated during various industrial processes, including petroleum and natural gas refining, mining operations, wastewater treatment activities, and refuse disposal practices. According to statistics from the World Health Organization (WHO), over 70 occupations are exposed to H2S, rendering it a key monitoring factor in occupational disease detection. Although H2S has legitimate uses in the chemical, medical, and other fields, prolonged exposure to this gas can cause severe damage to the respiratory and central nervous systems, as well as other organs in the human body. Moreover, the substantial release of H2S into the environment can lead to significant pollution. This noxious substance has the potential to impair soil, water, and air quality, while disrupting the equilibrium of the surrounding ecosystems. Therefore, sulfide has become one of the most commonly measured substances for environmental monitoring worldwide. Achieving the stable enrichment and accurate detection of low-level H2S is of great significance. Common methods for detecting this gas include spectrophotometry, chemical analysis, gas chromatography, rapid field detection, and ion chromatography. Although these methods provide relatively reliable results, they suffer from limitations such as high detection cost, low recovery, lack of environmental friendliness, and imprecise quantification of low-concentration H2S. Furthermore, the sampling processes involved in these methods are complex and require specialized equipment and electrical devices. Additionally, approximately 20% of the sulfides in a sample are lost after 2 h in a conventional alkaline sodium hydroxide solution, causing difficulties in preservation and detection. In this study, an accurate, efficient, and cost-saving method based on ion chromatography-pulse amperometry was developed for H2S determination. A conventional IonPac AS7 (250 mm×4 mm) anion-exchange column was employed, and a new eluent based on sodium hydroxide and sodium oxalate was used to replace the original sodium hydroxide-sodium acetate eluent. The main factors influencing the separation and detection performance of the proposed method, including the pulse amperage detection potential parameters and integration time, as well as the type and content of additives in the stabilizing solution, were optimized. The results showed that the proposed method had a good linear relationship between 10 and 3000 μg/L, with correlation coefficients (r2) of up to 0.999. The limits of detection (S/N=3) and quantification (S/N=10) were 1.53 and 5.10 μg/L, respectively. The relative standard deviations (RSDs) of the peak area and retention time of sulfides were less than 0.2% (n=6). The new method exhibited excellent stability, with up to 90% reduction in reagent costs. Compared with conventional ion chromatography-pulse amperometry, this method is more suitable for detecting low concentrations of sulfides in actual samples. Sulfides in a 250 mmol/L sodium hydroxide-0.8% (mass fraction) ethylenediaminetetraacetic acid disodium salt solution were effectively maintained for over 10 h. The new stabilizer significantly improved the reliability of both large-scale and long-term detection. The recovery of the proposed method was investigated by combining the system with a badge-type passive sampler. This sampling method requires no power devices; it is inexpensive, simple to operate, and can realize long-term sampling without the need for skilled personnel. Moreover, it can overcome the influence of short-term changes in pollutant concentration. The sampling results have high reference value for large-scale intervention-less pollutant monitoring in ultraclean rooms, museum counters, and other places. The results demonstrated that the recovery of the proposed method was greater than 95% for the blank sample and 80% for the sample plus standard solution. Finally, the newly established method was applied to determine H2S levels in air samples collected via passive sampling at school garbage stations. The measured results did not exceed the national limit.

Selection of a diagnostic tool for microbial water quality monitoring and management of faecal contamination of water sources in rural communities

The aim of the current study was to evaluate, validate and select microbial water quality monitoring tools to establish their suitability and feasibility for use in rural communities. The monitoring of water quality was performed at three different levels: i) basic level focusing on sanitary inspection and hydrogen sulphide (H2S) test; ii) intermediate level via enumeration of faecal indicator bacteria (faecal coliforms, Escherichia coli, Enterococcus spp. and Clostridium perfringens); and iii) advanced level based on qPCR detecting host-associated genetic markers (BacHum, BacCow, Cytb, Pig-2-Bac, and BacCan) and pathogens (Vibrio cholerae, Escherichia coli O157:H7, and Shiga toxin-producing Escherichia coli). A positive correlation was recorded between sanitary risk and faecal coliforms (r = 0.613 and p < 0.002), E. coli (r = 0.589 and p < 0.003), and Enterococcus spp. (r = 0.625 and p < 0.003). The H2S test showed positive correlations with sanitary risk score (r = 0.623; p < 0.003), faecal coliforms (r = 0.809; p < 0.001), E. coli (r = 0.779; p < 0.001) and Enterococcus spp. (r = 0.799; p < 0.001). Similar correlation patterns were also found with advanced techniques used for detecting host-associated genetic markers, excepted between Clostridium perfringens, and Pig-2-Bac (pig), BacCan (dog), and V. cholerae. The H2S test and sanitary inspections are therefore suitable and cost-effective tools to capacitate rural areas at household level for the monitoring of faecal contamination and management of water sources.

Cationic cellulose filter papers modified with ZnO/Ag/GO nanocomposite as point of use gravity-driven filters for bacterial removal from water

The surface modification of filters with large pore sizes for the development of low-cost gravity-driven point-of-use (POU) technologies for water disinfection can be an effective strategy to empower people to access safe water instantly, especially in low- and middle-income countries. In this study, the surface of commercial cellulose filter papers, as cheap and bio-based filters, was modified with polydopamine (PDA), polyethyleneimine (PEI) and ZnO/Ag/GO nanocomposite (ZnO/Ag/GO@PDA/PEI papers) for bacterial removal from water. PDA/PEI incorporation introduced a cationic functional layer, which can entrap negative bacteria and make a stable chemical bond with the nanocomposite. ZnO/Ag/GO exhibited promising synergistic antibacterial activities (30 times stronger than ZnO). As a result, 3 sheets of ZnO/Ag/GO@PDA/PEI papers showed a 99.98% bacterial reduction (E. coli), which met the WHO standards. Moreover, the leached zinc and silver in the filtrate were far below the WHO's limits (380 and 10 ppb, respectively). The results showed that the modified papers could be reused multiple times. After six times of reuse, the flow rate dropped slightly (below 20%) and the bacterial removal efficiency was more than 99.9%. This study is valuable for developing filters for treating bacterial-contaminated water on-site with no need for energy, which is a demand in many countries.

Identification of fecal contamination sources of groundwater in rural areas of Vhembe District Municipality, Limpopo Province, South Africa

Groundwater is a valuable source of drinking water worldwide, recognized as an improved drinking water source. However, on-site sanitation systems may put groundwater at risk of fecal contamination. In the present study, two approaches were used to ascertain the sources of fecal contamination in groundwater used by communities of the Vhembe District Municipality. Overall, 87.5% of boreholes (n = 70) in the wet and 72.5% in the dry season were contaminated with Escherichia coli, and septic tank (n = 18) wastewaters displayed up to 104  cfu/mL E. coli. Host-specific Bacteroidales quantitative polymerase chain reaction (qPCR) assays established the presence of human (BacHum and HF183) and animal (Cytb, BacCan, and Pig-2Bac) genetic markers in groundwater from 15.7% of boreholes (wet) and 10% of boreholes (dry). No strong associations were founded between culturable E. coli counts and the presence/absence of marker genes for all the markers except for Cytb marker, which showed a weak significant correlation (r = 0.217; p = <0.01) between E. coli and the Cytb marker under dry seasonal conditions. Human markers and Cytb were present in the household septic tank wastewater samples. Significant differences in marker genes distribution in wastewater were observed using the Chi-squared test: HF183 (p = <0.001) and BacHum (p = <0.001). Overall, no association was recorded between markers in groundwater and in wastewater for 18 households' septic tanks. A combined culturable E. coli and host-specific Bacteroidales qPCR assays remain an appropriate approach for the identification of fecal contamination of groundwater. PRACTITIONER POINTS: Households primarily used private boreholes for drinking water, as a primary source. Most households used on-site sanitation systems, including ventilated improved pit latrines and flush toilets connected to septic tanks. Escherichia coli was detected in groundwater, and the sources of fecal contamination were humans and animals (pigs, dogs, and chickens). The presence of human and animal markers in groundwater suggests that humans and animals are liable for fecal contamination. Fecal contamination in drinking water sources poses a significant concern due to pathogenic microorganisms posing potential human health risks.