Highly efficient organic photocatalysts discovered via a computer-aided-design strategy for visible-light-driven atom transfer radical polymerization

Low-Dispersity Polymers via Free Radical Alternating Copolymerization: Effects of Charge-Transfer-Complexes

Alternating copolymers are crucial for diverse applications. While dispersity (Ð, also known as molecular weight distribution, MWD) influences the properties of polymers, achieving low dispersities in alternating copolymers poses a notable challenge via free radical polymerizations (FRPs). In this work, we demonstrated an unexpected discovery that dispersities are affected by the participation of charge transfer complexes (CTCs) formed between monomer pairs during free radical alternating copolymerization, which have inspired the successful synthesis of various alternating copolymers with low dispersities (>30 examples, Ð=1.13-1.39) under visible-light irradiation. The synthetic method is compatible with binary, ternary and quaternary alternating copolymerizations and is expandable for both fluorinated and non-fluorinated monomer pairs. DFT calculations combined with model experiments indicated that CTC-absent reaction exhibits higher propagation rates and affords fewer radical terminations, which could contribute to low dispersities. Based on the integration of Monte Carlo simulation and Bayesian optimization, we established the relationship map between FRP parameter space and dispersity, further suggested the correlation between low dispersities and higher propagation rates. Our research sheds light on dispersity control via FRPs and creates a novel platform to investigate polymer dispersity through machine learning.

Functional Thermoplastic Polyurethane Elastomers with α, ω-Hydroxyl End-Functionalized Polyacrylates

Thermoplastic polyurethane (TPU) is an essential class of materials for demanding applications, from soft robotics and electronics to medical devices and batteries. However, traditional TPU development is primarily relied on specific soft segments, such as polyether, polyester, and polycarbonate polyols. Here, a novel method is introduced for developing TPU elastomers with enhanced performance and superior functionalities compared to conventional TPUs, achieved through the use of α,ω-hydroxyl end-functionalized polyacrylates. This approach involves a defect-free synthesis of α,ω-hydroxyl end-functionalized polyacrylates through visible-light-driven photoiniferter polymerization. By strategically blending these functionalized polyacrylates with conventional polyols, TPUs that exhibit exceptional toughness and notable self-healing capabilities, traits rarely found in existing TPUs are engineered. Furthermore, incorporating photo-crosslinkable acrylic monomers has enabled the creation of the first TPU with superior elastomeric properties and photopatterning capabilities. This approach paves the way for a new direction in polyurethane engineering, introducing a novel class of soft segments and unlocking the potential for a wide range of advanced applications.

Biomass-Derived Optically Clear Adhesives for Foldable Displays

Novel acrylate monomers, derived from terpenes are synthesized for use in optically clear adhesives (OCAs) suitable for foldable displays. These OCAs are prepared using visible-light-driven polymerization, an eco-friendly method. Through physical, rheological, and mechanical characterization, the prepared OCAs possess low modulus and exhibit outstanding creep and recovery properties, making them suitable for foldable devices.

Tailoring the Degradation of Cyanoarene-Based Photocatalysts for Enhanced Visible-Light-Driven Halogen Atom Transfer

We present the strategic design of donor-acceptor cyanoarene-based photocatalysts (PCs) aiming to augment beneficial PC degradation for halogen atom transfer (XAT)-induced dehalogenation reactions. Our investigation reveals a competitive nature between the catalytic cycle and the degradation pathway, with the degradation becoming dominant, particularly for less activated alkyl halides. The degradation behavior of PCs significantly impacts the efficiency of the XAT process, leading to exploration into manipulating the degradation behavior in a desirable direction. Recognizing the variation in the nature and rate of PC degradation, as well as its influence on the reaction across the range of PC structures, we carefully engineered the PCs to develop a pre-catalyst, named 3DP-DCDP-IPN. This pre-catalyst undergoes rapid degradation into an active form, 3DP-DCDP-Me-BN, exhibited an enhanced reducing ability in its radical anion form to induce better PC regeneration and consequently effectively catalyzes the XAT reaction, even with a challenging substrate.

Sequential closed-loop Bayesian optimization as a guide for organic molecular metallophotocatalyst formulation discovery

Conjugated organic photoredox catalysts (OPCs) can promote a wide range of chemical transformations. It is challenging to predict the catalytic activities of OPCs from first principles, either by expert knowledge or by using a priori calculations, as catalyst activity depends on a complex range of interrelated properties. Organic photocatalysts and other catalyst systems have often been discovered by a mixture of design and trial and error. Here we report a two-step data-driven approach to the targeted synthesis of OPCs and the subsequent reaction optimization for metallophotocatalysis, demonstrated for decarboxylative sp3-sp2 cross-coupling of amino acids with aryl halides. Our approach uses a Bayesian optimization strategy coupled with encoding of key physical properties using molecular descriptors to identify promising OPCs from a virtual library of 560 candidate molecules. This led to OPC formulations that are competitive with iridium catalysts by exploring just 2.4% of the available catalyst formulation space (107 of 4,500 possible reaction conditions).

Photo-Deactivation Strategy for Switchable ATRP with the Assistance of Molecular Switches

Light irradiation is an external stimulus, rapidly developed in switchable atom transfer radical polymerization (ATRP) via photo-activation methods in recent years. Herein, a photo-deactivation strategy is introduced to regulate ATRP with the assistance of photoswitchable hexaarylbiimidozole (HABI). Under visible light irradiation and in the presence of HABI, ATRP is greatly decelerated or quenched depending on the concentration of HABI. Interestingly, with visible light off, ATRP can proceed smoothly and follow a first-order kinetics. Moreover, photo-switchable ATRP alternatively with light off and on is demonstrated. Besides, the mechanism of photo-deactivation ATRP involving radical quenching is proposed in the presence of HABI.

Highly efficient dual photoredox/copper catalyzed atom transfer radical polymerization achieved through mechanism-driven photocatalyst design

Atom transfer radical polymerization (ATRP) with dual photoredox/copper catalysis combines the advantages of photo-ATRP and photoredox-mediated ATRP, utilizing visible light and ensuring broad monomer scope and solvent compatibility while minimizing side reactions. Despite its popularity, challenges include high photocatalyst (PC) loadings (10 to 1000 ppm), requiring additional purification and increasing costs. In this study, we discover a PC that functions at the sub-ppm level for ATRP through mechanism-driven PC design. Through studying polymerization mechanisms, we find that the efficient polymerizations are driven by PCs whose ground state oxidation potential-responsible for PC regeneration-play a more important role than their excited state reducing power, responsible for initiation. This is verified by screening PCs with varying redox potentials and triplet excited state generation capabilities. Based on these findings, we identify a highly efficient PC, 4DCDP-IPN, featuring moderate excited state reducing power and a maximized ground state oxidation potential. Employing this PC at 50 ppb, we synthesize poly(methyl methacrylate) with high conversion, narrow molecular weight distribution, and high chain-end fidelity. This system exhibits oxygen tolerance and supports large-scale reactions under ambient conditions. Our findings, driven by the systematic PC design, offer meaningful insights for controlled radical polymerizations and metallaphotoredox-mediated syntheses beyond ATRP.

The Development of Visible-Light Organic Photocatalysts for Atom Transfer Radical Polymerization via Conjugation Extension

This work aimed to develop organic photocatalysts (PCs) that could mediate organocatalytic atom transfer radical polymerization (O-ATRP) under visible light. Through the core-modification of known chromophoric structures and ring-locking to reach a conjugation extension, annulated N-aryl benzo[kl]acridines were identified as effective visible light-responsive photocatalysts. The corresponding selenium-doped structure showed excellent performance in the O-ATRP of methacrylates, which could afford polymer products with controlled molecular weights and low dispersities under the irradiation of visible light at a 100 ppm catalyst loading.

Metal-Free Atom Transfer Radical Polymerization to Prepare Recylable Micro-Adjuvants for Dendritic Cell Vaccine

In the development of dendritic cell (DC) vaccines, the maturation of DCs is a critical stage. Adjuvants play a pivotal role in the maturation of DCs, with a major concern being to ensure both efficacy and safety. This study introduces an innovative approach that combines high efficacy with safety through the synthesis of micro-adjuvants grafted with copolymers of 2-(methacrylamido) glucopyranose (MAG) and methacryloxyethyl trimethyl ammonium chloride (DMC). The utilization of metal-free surface-initiated atom transfer radical polymerization enables the production of safe and recyclable adjuvants. These micrometer-sized adjuvants surpass the optimal size range for cellular endocytosis, enabling the retrieval and reuse of them during the ex vivo maturation process, mitigating potential toxicity concerns associated with the endocytosis of non-metabolized nanoparticles. Additionally, the adjuvants exhibit a "micro-ligand-mediated maturation enhancement" effect for DC maturation. This effect is influenced by the shape of the particle, as evidenced by the distinct promotion effects of rod-like and spherical micro-adjuvants with comparable sizes. Furthermore, the porous structure of the adjuvants enables them to function as cargo-carrying "micro-shuttles", releasing antigens upon binding to DCs to facilitate efficient antigen delivery.

"On-Water" accelerated dearomative cycloaddition via aquaphotocatalysis

Sulfur(VI) fluoride exchange (SuFEx) has emerged as an innovative click chemistry to harness the pivotal connectivity of sulfonyl fluorides. Synthesizing such alkylated S(VI) molecules through a straightforward process is of paramount importance, and their water-compatibility opens the door to a plethora of applications in biorelevant and materials chemistry. Prior aquatic endeavors have primarily focused on delivering catalysts involving ionic mechanisms, studies regarding visible-light photocatalytic transformation are unprecedented. Herein we report an on-water accelerated dearomative aquaphotocatalysis for heterocyclic alkyl SuFEx hubs. Notably, water exerts a pronounced accelerating effect on the [2 + 2] cycloaddition between (hetero)arylated ethenesulfonyl fluorides and inert heteroaromatics. This phenomenon is likely due to the high-pressure-like reactivity amplification at the water-oil interface. Conventional solvents proved totally ineffective, leading to the isomerization of the starting material.

Ultraviolet light blocking optically clear adhesives for foldable displays via highly efficient visible-light curing

In developing an organic light-emitting diode (OLED) panel for a foldable smartphone (specifically, a color filter on encapsulation) aimed at reducing power consumption, the use of a new optically clear adhesive (OCA) that blocks UV light was crucial. However, the incorporation of a UV-blocking agent within the OCA presented a challenge, as it restricted the traditional UV-curing methods commonly used in the manufacturing process. Although a visible-light curing technique for producing UV-blocking OCA was proposed, its slow curing speed posed a barrier to commercialization. Our study introduces a highly efficient photo-initiating system (PIS) for the rapid production of UV-blocking OCAs utilizing visible light. We have carefully selected the photocatalyst (PC) to minimize electron and energy transfer to UV-blocking agents and have chosen co-initiators that allow for faster electron transfer and more rapid PC regeneration compared to previously established amine-based co-initiators. This advancement enabled a tenfold increase in the production speed of UV-blocking OCAs, while maintaining their essential protective, transparent, and flexible properties. When applied to OLED devices, this OCA demonstrated UV protection, suggesting its potential for broader application in the safeguarding of various smart devices.

Ultraviolet Light Debondable Optically Clear Adhesives for Flexible Displays through Efficient Visible-Light Curing

With growing sustainability concerns, the need for products that facilitate easy disassembly and reuse has increased. Adhesives, initially designed for bonding, now face demands for selective removal, enabling rapid assembly-disassembly and efficient maintenance across industries. This need is particularly evident in the display industry, with the rise of foldable devices necessitating specialized adhesives. A novel optically clear adhesive (OCA) is presented for foldable display, featuring a unique UV-stimulated selective removal feature. This approach incorporates benzophenone derivatives into the polymer network, facilitating rapid debonding under UV irradiation. A key feature of this method is the adept use of visible-light-driven radical polymerization for OCA film fabrication. This method shows remarkable compatibility with various monomers and exhibits orthogonal reactivity to benzophenone, rendering it ideal for large-scale production. The resultant OCA not only has high transparency and balanced elasticity, along with excellent resistance to repeated folding, but it also exhibits significantly reduced adhesion when exposed to UV irradiation. By merging this customized formulation with strategically integrated UV-responsive elements, an effective solution is offered that enhances manufacturing efficiency and product reliability in the rapidly evolving field of sustainable electronics and displays. This research additionally contributes to eco-friendly device fabrication, aligning with emerging technology demands.

Accidental triplet harvesting in donor-acceptor dyads with low spin-orbit coupling

We present an accidental mechanism for efficient intersystem crossing (ISC) between singlet and triplet states with low spin-orbit coupling (SOC) in molecules having donor-acceptor (D-A) moieties separated by a Sigma bond. Our study shows that SOC between the lowest singlet excited state and the higher-lying triplet states, together with nuclear motion-driven coupling of this triplet state with lower-lying triplet states during the free rotation about a Sigma bond, is one of the possible ways to achieve the experimentally observed ISC rate for a class of D-A type photoredox catalysts. This mechanism is found to be the dominant contributor to the ISC process with the corresponding rate reaching a maximum at a dihedral angle in the range of 72°-78° between the D-A moieties of 10-(naphthalen-1-yl)-3,7-diphenyl-10H-phenoxazine and other molecules included in the study. We have further demonstrated that the same mechanism is operative in a specific spirobis[anthracene]dione molecule, where the D and A moieties are interlocked near to the optimal dihedral angle, indicating the plausible effectiveness of the proposed mechanism. The present finding is expected to have implications in strategies for the synthesis of new generations of triplet-harvesting organic molecules.

Toward the Rational Design of Organic Catalysts for Organocatalysed Atom Transfer Radical Polymerisation

Thanks to their diversity, organic photocatalysts (PCs) have been widely used in manufacturing polymeric products with well-defined molecular weights, block sequences, and architectures. Still, however, more universal property-performance relationships are needed to enable the rational design of such PCs. That is, a set of unique descriptors ought to be identified to represent key properties of the PCs relevant for polymerisation. Previously, the redox potentials of excited PCs (PC*) were used as a good descriptor for characterising very structurally similar PCs. However, it fails to elucidate PCs with diverse chromophore cores and ligands, among which those used for polymerisation are a good representative. As showcased by model systems of organocatalysed atom transfer radical polymerisation (O-ATRP), new universal descriptors accounting for additional factors, such as the binding and density overlap between the PC* and initiator, are proposed and proved to be successful in elucidating the experimental performances of PCs in polymerisation. While O-ATRP is exemplified here, the approach adopted is general for studying other photocatalytic systems.

Characterization of the Reversible Intersystem Crossing Dynamics of Organic Photocatalysts Using Transient Absorption Spectroscopy and Time-Resolved Fluorescence Spectroscopy

Thermally activated delayed fluorescence (TADF) emitters are molecules of interest as homogeneous organic photocatalysts (OPCs) for photoredox chemistry. Here, three classes of OPC candidates are studied in dichloromethane (DCM) or N,N-dimethylformamide (DMF) solutions, using transient absorption spectroscopy and time-resolved fluorescence spectroscopy. These OPCs are benzophenones with either carbazole (2Cz-BP and 2tCz-BP) or phenoxazine/phenothiazine (2PXZ-BP and 2PTZ-BP) appended groups and the dicyanobenzene derivative 4DP-IPN. Dual lifetimes of the S1 state populations are observed, consistent with reverse intersystem crossing (RISC) and TADF emission. Example fluorescence lifetimes in DCM are (5.18 ± 0.01) ns and (6.22 ± 1.27) μs for 2Cz-BP, (1.38 ± 0.01) ns and (0.32 ± 0.01) μs for 2PXZ-BP, and (2.97 ± 0.01) ns and (62.0 ± 5.8) μs for 4DP-IPN. From ground state bleach recoveries and time-correlated single photon counting measurements, triplet quantum yields in DCM are estimated to be 0.62 ± 0.16, 0.04 ± 0.01, and 0.83 ± 0.02 for 2Cz-BP, 2PXZ-BP, and 4DP-IPN, respectively. 4DP-IPN displays similar photophysical behavior to the previously studied OPC 4Cz-IPN. Independent of the choice of solvent, 4DP-IPN, 2Cz-BP, and 2tCz-BP are shown to be TADF emitters, whereas emission by 2PXZ-BP and 2PTZ-BP depends on the molecular environment, with TADF emission enhanced in aggregates compared to monomers. Behavior of this type is representative of aggregation-induced emission luminogens (AIEgens).

Donor-Acceptor-Donor Triads with Flexible Spacers: Deciphering Complex Photophysics for Targeted Materials Design

The complex photokinetics of donor-acceptor-donor triads with varying flexible spacer lengths (n = 4-10 carbon atoms) are investigated in liquid and solid solution, as well as in crystals, by steady-state and transient fluorescence spectroscopy combined with computational studies. For the short spacer (n = 4) in a liquid solution, dynamic charge-transfer (CT) state formation with subsequent, efficient exciplex emission is observed, effectively competing with quenching through electron transfer (eT) via a radical ion pair. In a solid solution, a fluorescent CT static complex is formed upon freezing for all spacer lengths. This allows the observations of a former seminal report on stimuli-responsive high-contrast fluorescence on/off switching in films of the triads to be reassigned (Adv. Mater. 2012, 24, 5487), now providing a holistic picture on varying spacer length. In fact, external stimuli of the film by modulating the geometry of the CT complex, which results in on/off fluorescence switching (for n > 4) or in a change of the emission color (n = 4). The work thus demonstrates how in-depth analysis of complex photophysics can be put to practical use in materials science.

Visible-Light-Curable Acrylic Resins toward UV-Light-Blocking Adhesives for Foldable Displays

Current technological advances in the organic light-emitting diode panel design of foldable smartphones demand advanced adhesives with UV-blocking abilities, beyond their conventional roles of bonding objects and relieving deformation stress. However, optically clear adhesives (OCAs) with UV-blocking ability cannot be prepared using conventional UV-curing methods relying on a photoinitiator. Herein, a new acrylic resin that can be efficiently cured using visible light without oxygen removal is presented, which may be used to develop UV-blocking OCAs for use in current flexible displays. A novel photocatalyst and a specific combination of additives facilitate sufficiently rapid curing under visible light in the presence of UV-absorbers. Only a very small amount of the highly active photocatalyst is required to prepare UV-blocking OCA films with very high transparency in the visible region. Using this system, a UV-blocking OCA that nearly meets the specifications of an OCA used in commercialized foldable smartphones is realized. This technology can also be utilized in other applications that require highly efficient visible light curing, such as optically clear resins, dental resins, and 3D/4D-printable materials.

Curved Nanographenes: Multiple Emission, Thermally Activated Delayed Fluorescence, and Non-Radiative Decay

The intriguing and rich photophysical properties of three curved nanographenes (CNG 6, 7, and 8) are investigated by time-resolved and temperature-dependent photoluminescence (PL) spectroscopy. CNG 7 and 8 exhibit dual fluorescence, as well as dual phosphorescence at low temperature in the main PL bands. In addition, hot bands are detected in fluorescence as well as phosphorescence, and, in the narrow temperature range of 100-140 K, thermally activated delayed fluorescence (TADF) with lifetimes on the millisecond time-scale is observed. These findings are rationalized by quantum-chemical simulations, which predict a single minimum of the S1 potential of CNG 6, but two S1 minima for CNG 7 and CNG 8, with considerable geometric reorganization between them, in agreement with the experimental findings. Additionally, a higher-lying S2 minimum close to S1 is optimized for the three CNG, from where emission is also possible due to thermal activation and, hence, non-Kasha behavior. The presence of higher-lying dark triplet states close to the S1 minima provides mechanistic evidence for the TADF phenomena observed. Non-radiative decay of the T1 state appears to be thermally activated with activation energies of roughly 100 meV and leads to disappearance of phosphorescence and TADF at T > 140 K.

Bodipy Dimer for Enhancing Triplet-Triplet Annihilation Upconversion Performance

Triplet-triplet annihilation upconversion (TTA-UC) has considerable potential for emerging applications in bioimaging, optogenetics, photoredox catalysis, solar energy harvesting, etc. Fluoroboron dipyrrole (Bodipy) dyes are an essential type of annihilator in TTA-UC. However, conventional Bodipy dyes generally have large molar extinction coefficients and small Stokes shifts (<20 nm), subjecting them to severe internal filtration effects at high concentrations, and resulting in low upconversion quantum efficiency of TTA-UC systems using Bodipy dyes as annihilators. In this study, a Bodipy dimer (B-2) with large Stokes shifts was synthesized using the strategy of dimerization of an already reported Bodipy annihilator (B-1). Photophysical characterization and theoretical chemical analysis showed that both B-1 and B-2 can couple with the red light-activated photosensitizer PdTPBP to fulfill TTA-UC; however, the higher fluorescence quantum yield of B-2 resulted in a higher upconversion efficiency (η_UC) for PdTPBP/B-2 (10.7%) than for PdTPBP/B-1 (4.0%). This study proposes a new strategy to expand Bodipy Stokes shifts and improve TTA-UC performance, which can facilitate the application of TTA-UC in photonics and biophotonics.

Chalcogen-bridged coordination polymer for the photocatalytic activation of aryl halides

The ability to deliver electrons is vital for dye-based photocatalysts. Conventionally, the aromatic stacking-based charge-transfer complex increases photogenerated electron accessibility but decreases the energy of excited-state dyes. To circumvent this dilemma, here we show a strategy by tuning the stacking mode of dyes. By decorating naphthalene diimide with S-bearing branches, the S···S contact-linked naphthalene diimide string is created in coordination polymer, thereby enhancing electron mobility while simultaneously preserving competent excited-state reducing power. This benefit, along with in situ assembly between naphthalene diimide strings and exogenous reagent/reactant, improves the accessibility of short-lived excited states during consecutive photon excitation, resulting in greater efficiency in photoinduced electron-transfer activation of inert bonds in comparison to other coordination polymers with different dye-stacking modes. This heterogeneous approach is successfully applied in the photoreduction of inert aryl halides and the successive formation of C_Ar-C/S/P/B bonds with potential pharmaceutical applications.

Machine-Learning Classification for the Prediction of Catalytic Activity of Organic Photosensitizers in the Nickel(II)-Salt-Induced Synthesis of Phenols

Catalytic systems using a small amount of organic photosensitizer for the activation of an inorganic (on-demand ligand-free) nickel(II) salt represent a cost-effective method for cross-coupling reactions, while C(sp² )-O bond formation remains less developed. Herein, we report a strategy for the synthesis of phenols with a nickel(II) salt and an organic photosensitizer, which was identified via an investigation into the catalytic activity of 60 organic photosensitizers consisting of various electron donor and acceptor moieties. To examine the effect of multiple intractable parameters on the catalytic activity of photosensitizers, machine-learning (ML) models were developed, wherein we embedded descriptors representing their physical and structural properties, which were obtained from DFT calculations and RDKit, respectively. The study clarified that integrating both DFT- and RDKit-derived descriptors in ML models balances higher "precision" and "recall" across a wide range of search space relative to using only one of the two descriptor sets.

Formation and degradation of strongly reducing cyanoarene-based radical anions towards efficient radical anion-mediated photoredox catalysis

Cyanoarene-based photocatalysts (PCs) have attracted significant interest owing to their superior catalytic performance for radical anion mediated photoredox catalysis. However, the factors affecting the formation and degradation of cyanoarene-based PC radical anion (PC^•‒) are still insufficiently understood. Herein, we therefore investigate the formation and degradation of cyanoarene-based PC^•‒ under widely-used photoredox-mediated reaction conditions. By screening various cyanoarene-based PCs, we elucidate strategies to efficiently generate PC^•‒ with adequate excited-state reduction potentials (E_red^*) via supra-efficient generation of long-lived triplet excited states (T₁). To thoroughly investigate the behavior of PC^•‒ in actual photoredox-mediated reactions, a reductive dehalogenation is carried out as a model reaction and identified the dominant photodegradation pathways of the PC^•‒. Dehalogenation and photodegradation of PC^•‒ are coexistent depending on the rate of electron transfer (ET) to the substrate and the photodegradation strongly depends on the electronic and steric properties of the PCs. Based on the understanding of both the formation and photodegradation of PC^•‒, we demonstrate that the efficient generation of highly reducing PC^•‒ allows for the highly efficient photoredox catalyzed dehalogenation of aryl/alkyl halides at a PC loading as low as 0.001 mol% with a high oxygen tolerance. The present work provides new insights into the reactions of cyanoarene-based PC^•‒ in photoredox-mediated reactions.

N,N'-Diaryldihydrophenazines as a Sustainable and Cost-Effective Alternative to Precious Metal Complexes in the Photoredox-Catalyzed Alkylation of Aryl Alkyl Ketones

An inexpensive and highly efficient metal-free alternative to commonly used Ru- and Ir-based catalysts was proposed. It was shown that the new 2,7-di-tert-butyl-5,10-bis(4-trifluoromethylphenyl)-5,10-dihydrophenazine outcompeted the iridium phenylpyridyl complex in photoredox activity in the alkylation of silyl enol ethers yielding aryl alkyl ketones. The reaction occurred under visible light irradiation at room temperature and was also applicable to drug derivatives (ibuprofen and naproxen). In-depth photophysical, electrochemical, and quantum chemical studies showed that the aforementioned N,N-diaryldihydrophenazine exhibited enhanced properties that were essential for the photoredox catalysis (a long-lived triplet excited state, strong reducing ability, high stability of the radical cations formed in single-electron-transfer event, and chemical inertness of the catalyst with respect to reactants). Importantly, the substituted N,N'-diaryldihydrophenazines could be obtained directly from diaryl amines; a facile, easily handled and scaled-up one-pot synthetic procedure was elaborated.

PVDF-Based Fluoropolymer Modifications via Photoinduced Atom Transfer Radical Polymerizations

Graft modifications of PVDF fluoropolymers have been identified as the efficient route to improve the properties and expand the applications. Taking advantage of C-F and C-Cl bonds in the repeat units, atom transfer radical polymerizations (ATRP) were widely used for graft modification. Recently, photoinduced ATRP has shown good spatial and temporal control over the polymerization process in contrast to thermal activation mode. This minireview highlights the progress in PVDF-based fluoropolymer modifications by using photoinduced Cu(II)-mediated ATRP and organocatalyzed ATRP. The challenges and opportunities are proposed with the aim at advancing the development of synthesis and applications of fluoropolymer.

Photoinduced Ion-Pair Inner-Sphere Electron Transfer-Reversible Addition-Fragmentation Chain Transfer Polymerization

Photoredox-mediated reversible deactivation radical polymerization (RDRP) is a promising method of precise synthesis of polymers with diverse structures and properties. However, its mechanism mainly based on the outer-sphere electron transfer (OSET) leads to stringent requirements for an efficient photocatalyst. In this paper, the zwitterionic organoboranes [L₂B]⁺X^- are prepared and applied in reversible addition-fragmentation chain transfer (RAFT) polymerization with the photoinduced ion-pair inner-sphere electron transfer (IP-ISET) mechanism. The ion-pair electron transfer mechanism and the formation of the radical [L₂B]^• are supported by electron paramagnetic resonance (EPR) radical capture experiments, ¹H/¹¹B NMR spectroscopy, spectroelectrochemical spectroscopy, transient absorption spectroscopy, theoretical calculation, and photoluminescence quenching experiments. Photoluminescence quenching experiments show that when [CTA]/[[L₂B]⁺] ≥ 0.6, it is static quenching because of the in situ formation of [L₂B]⁺[ZCS₂]^-, the real catalytic species. [L₂B]⁺[C₃H₇SCS₂]^- is synthesized, and its photoluminescence lifetime is the same as the lifetime in the static quenching experiment, indicating the formation of [L₂B]⁺[ZCS₂]^- in polymerization and the IP-ISET mechanism. The matrix-assisted laser desorption ionization time-of-flight mass (MALDI-TOF MS) spectra show that the structure of [C₃H₇SCS₂] was incorporated into the polymer, indicating that ion-pair electron transfer occurs in catalytic species. The polymerization shows high catalytic activity at ppb catalyst loading, a wide range of monomers, excellent tolerance in the presence of 5 mol % phenolic inhibitors, and the synthesis of ultrahigh-molecular-weight polymers. This protocol with the IP-ISET mechanism exhibits a value in the development of new organic transformations and polymerization methods.

Removal of photoredox catalysts from polymers synthesized by organocatalyzed atom transfer radical polymerization

Organocatalyzed atom transfer radical polymerization (O-ATRP) is a method of producing polymers with precise structures under mild conditions using organic photoredox catalysts (PCs). Due to the unknown toxicity of PCs and their propensity to introduce color in polymers synthesized by this method, removal of the PC from the polymer product can be important for certain applications of polymers produced using O-ATRP. Current purification methods largely rely on precipitation to remove the PC from the polymer, but a more effective and efficient purification method is needed. In this work, an alternative purification method relying on oxidation of the PC to PC · + followed by filtration through a plug to remove PC · + from the polymer and removal of the volatiles was developed. A range of chemical oxidants and stationary phases were tested for their ability to remove PCs from polymers, revealing chemical oxidation by N-bromosuccinimide followed by a filtration through a silica plug can remove up to 99% of the PC from poly(methyl methacrylate). Characterization of the polymer before and after purification demonstrated that polymer molecular weight, dispersity, and chain-end fidelity are not signficantly impacted by this purification method. Finally, this purification method was tested on a range of dihydrophenazine, phenoxazine, dihydroacridines, and phenothiazine PCs, revealing the strength of the chemical oxidant must match the oxidation potential of the PC for effective purification.

Atom Transfer Radical Polymerization: A Mechanistic Perspective

Since its inception, atom transfer radical polymerization (ATRP) has seen continuous evolution in terms of the design of the catalyst and reaction conditions; today, it is one of the most useful techniques to prepare well-defined polymers as well as one of the most notable examples of catalysis in polymer chemistry. This Perspective highlights fundamental advances in the design of ATRP reactions and catalysts, focusing on the crucial role that mechanistic studies play in understanding, rationalizing, and predicting polymerization outcomes. A critical summary of traditional ATRP systems is provided first; we then focus on the most recent developments to improve catalyst selectivity, control polymerizations via external stimuli, and employ new photochemical or dual catalytic systems with an outlook to future research directions and open challenges.

Moving Beyond Cyanoarene Thermally Activated Delayed Fluorescence Compounds as Photocatalysts: An Assessment of the Performance of a Pyrimidyl Sulfone Photocatalyst in Comparison to 4CzIPN

Carbazolyl dicyanobenzene (CDCB) derivates exhibiting thermally activated delayed fluorescence (TADF) have shown themselves to be excellent photocatalysts over recent years, particularly 4CzIPN, although investigation into organic TADF compounds as photocatalysts outside of the CDCB group has been limited. Herein, we report an alternative donor-acceptor TADF structure, 9,9'-(sulfonylbis(pyrimidine-5,2-diyl))bis(3,6-di-tert-butyl-9H-carbazole), pDTCz-DPmS, for use as a photocatalyst (PC). A comparison of the electrochemical and photophysical properties of pDTCz-DPmS with 4CzIPN in a range of solvents identifies the former as a better ground state reducing agent and photoreductant, while both exhibit similar oxidation capabilities in the ground and excited state. The increased conjugation of pDTCz-DPmS relative to 4CzIPN presents a more intense CT band in the UV-vis absorption spectrum, aiding in the light absorption of this molecule. Prompt and delayed emission lifetimes are observed for pDTCz-DPmS, confirming the TADF nature, both of which are sufficiently long-lived to participate in productive photochemistry. These combined properties make pDTCz-DPmS useful in photocatalysis reactions, covering a range of photoredox oxidative and reductive quenching reactions, as well as those involving a dual Ni(II) cocatalyst, alongside energy transfer processes. The higher triplet energy and increased photostability of pDTCz-DPmS compared with 4CzIPN were found to be advantages of this organic PC.

Visible light-controlled living cationic polymerization of methoxystyrene

Photo-controlled living polymerization has received great attention in recent years. However, despite the great success therein, the report on photo-controlled living cationic polymerization has been greatly limited. We demonstrate here a novel decolorable, metal-free and visible light-controlled living cationic polymerization system by using tris(2,4-dimethoxyphenyl)methylium tetrafluoroborate as the photocatalyst and phosphate as the chain transfer agent (CTA) for polymerization of 4-methoxystyrene. This polymerization reaction under green LED light irradiation shows clear living characteristics including predictable molar mass, low molar-mass dispersity (Đ = 1.25), and sequential polymerization capability. In addition, the photocatalytic system exits excellent "on-off" photo switchability and shows the longest "off period" of 36 h up to now for photo-controlled cationic polymerization. Furthermore, the residual photo-catalyst is easily deactivated and decolored with addition of a base after the polymerization. The present study has extended the photo-controlled living cationic polymerization systems with new organic photocatalysts, phosphate CTA and polymerizable monomer as well as the new properties of excellent photostability and in-situ decolored capacity.

Independent Trajectory Mixed Quantum-Classical Approaches Based on the Exact Factorization

Mixed quantum-classical dynamics based on the exact factorization exploits the "derived" electron-nuclear correlation (ENC) term aiming for the description of quantum coherences. The ENC contains interactions between the phase of electronic states and nuclear quantum momenta which depend on the spatial shape of the nuclear density.The original surface hopping based on the exact factorization (SHXF) [\textit{J. Phys. Chem. Lett.} \textbf{2018}, \textit{9}, 1097] exploits frozen Gaussian functions to construct the nuclear density in the ENC term while the phase of electronic states is approximated as a fictitious nuclear momentum change.However, in reality, the width of nuclear wave packets varies in time depending on the shape of potential energy surfaces.In this work, we present a modified SHXF approach and a newly-developed Ehrenfest dynamics based on the exact factorization (EhXF) with time-dependent Gaussian functions and phases by enforcing total energy conservation.We perform numerical tests for various one-dimensional two-state model Hamiltonians.Overall, the time-dependent width of Gaussian functions and the energy conserving phase show a reliable decoherence compared to the original frozen Gaussian-based SHXF and the exact quantum mechanical calculation.Especially, the energy conserving phase is crucial for EhXF to reproduce the correct quantum dynamics.

A Water-Soluble Organic Photocatalyst Discovered for Highly Efficient Additive-Free Visible-Light-Driven Grafting of Polymers from Proteins at Ambient and Aqueous Environments

Since the pioneering discovery of a protein bound to poly(ethylene glycol), the utility of protein-polymer conjugates (PPCs) is rapidly expanding to currently emerging applications. Photoinduced energy/electron-transfer reversible addition-fragmentation chain-transfer (PET-RAFT) polymerization is a very promising method to prepare structurally well-defined PPCs, as it eliminates high-cost and time-consuming deoxygenation processes due to its oxygen tolerance. However, the oxygen-tolerance behavior of PET-RAFT polymerization is not well-investigated in aqueous environments, and thereby the preparation of PPCs using PET-RAFT polymerization needs a substantial amount of sacrificial reducing agents or inert-gas purging processes. Herein a novel water-soluble and biocompatible organic photocatalyst (PC) is reported, which enables visible-light-driven additive-free "grafting-from" polymerizations of a protein in ambient and aqueous environments. Interestingly, the developed PC shows unconventional "oxygen-acceleration" behavior for a variety of acrylic and acrylamide monomers in aqueous conditions without any additives, which are apparently distinct from previously reported systems. With such a PC, "grafting-from" polymerizations are successfully performed from protein in ambient buffer conditions under green light-emitting diode (LED) irradiation, which result in various PPCs that have neutral, anionic, cationic, and zwitterionic polyacrylates, and polyacrylamides. It is believed that this PC will be widely employed for a variety of photocatalysis processes in aqueous environments, including the living cell system.

Rational Design of Photocatalysts for Controlled Polymerization: Effect of Structures on Photocatalytic Activities

Over the past decade, the use of photocatalysts (PCs) in controlled polymerization has brought new opportunities in sophisticated macromolecular synthesis. However, the selection of PCs in these systems has been typically based on laborious trial-and-error strategies. To tackle this limitation, computer-guided rational design of PCs based on knowledge of structure-property-performance relationships has emerged. These rational strategies provide rapid and economic methodologies for tuning the performance and functionality of a polymerization system, thus providing further opportunities for polymer science. This review provides an overview of PCs employed in photocontrolled polymerization systems and summarizes their progression from early systems to the current state-of-the-art. Background theories on electronic transitions are also introduced to establish the structure-property-performance relationships from a perspective of quantum chemistry. Typical examples for each type of structure-property relationships are then presented to enlighten future design of PCs for photocontrolled polymerization.

The advent and development of organophotoredox catalysis

In the last decade, photoredox catalysis has unlocked unprecedented reactivities in synthetic organic chemistry. Seminal advancements in the field have involved the use of well-studied metal complexes as photoredox catalysts (PCs). More recently, the synthetic community, looking for more sustainable approaches, has been moving towards the use of purely organic molecules. Organic PCs are generally cheaper and less toxic, while allowing their rational modification to an increased generality. Furthermore, organic PCs have allowed reactivities that are inaccessible by using common metal complexes. Likewise, in synthetic catalysis, the field of photocatalysis is now experiencing a green evolution moving from metal catalysis to organocatalysis. In this feature article, we discuss and critically comment on the scientific reasons for this ongoing evolution in the field of photoredox catalysis, showing how and when organic PCs can efficiently replace their metal counterparts.

Photoinduced Organocatalyzed Atom Transfer Radical Polymerization (O-ATRP): Precision Polymer Synthesis Using Organic Photoredox Catalysis

The development of photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) has received considerable attention since its introduction in 2014. Expanding on many of the advantages of traditional ATRP, O-ATRP allows well-defined polymers to be produced under mild reaction conditions using organic photoredox catalysts. As a result, O-ATRP has opened access to a range of sensitive applications where the use of a metal catalyst could be of concern, such as electronics, certain biological applications, and the polymerization of coordinating monomers. However, key limitations of this method remain and necessitate further investigation to continue the development of this field. As such, this review details the achievements made to-date as well as future research directions that will continue to expand the capabilities and application landscape of O-ATRP.

Selective Photoactivation of Trithiocarbonates Mediated by Metal Naphthalocyanines and Overcoming Activation Barriers Using Thermal Energy

Metal naphthalocyanines (MNcs) were demonstrated to be efficient photocatalysts to activate photoinduced electron-transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization, enabling well-controlled polymerization of (meth)acrylates under near-infrared (λ = 780 nm) light. Owing to their lower redox potential compared to previously explored photocatalysts, the activation of trithiocarbonate RAFT agents exhibited a unique selectivity that was dependent on the nature of the R group. Specifically, MNcs were capable in activating tertiary R group trithiocarbonates, whereas no activation of the trithiocarbonate possessing a secondary R group was observed. The combination of density functional theory calculations and experimental studies have revealed new mechanistic insights into the factors governing a PET-RAFT mechanism and explained this unique selectivity of MNcs toward tertiary carbon trithiocarbonates. Interestingly, by increasing the reaction temperature moderately (i.e., ∼15 °C), the energy barrier prohibiting the photoactivation of the trithiocarbonate with a secondary R group was overcome, enabling their successful activation.

Organocatalytic PET-RAFT polymerization with a low ppm of organic photocatalyst under visible light

The development of light-mediated controlled radical polymerization has benefited from the discovery of novel photocatalysts, which could allow precise light control over the polymerization process and the production of well-defined polymers.

Donor modification of thermally activated delayed fluorescence photosensitizers for organocatalyzed atom transfer radical polymerization

TADF donor-acceptor conjugates were applied as photosensitizers for organocatalyzed organic atom transfer radical polymerization. A donor-modification strategy was found to dramatically improve the control over the polymerization.

Aqueous Protein-Polymer Bioconjugation via Photoinduced RAFT Polymerization Using High Loading Heterogeneous Catalyst

Light-driven polymerization, such as photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization, enables biological benign conditions and versatile functional polymer structure design, which is readily used in protein-polymer bioconjugates. However, conventional metalloporphyrinic homogeneous catalysts for PET-RAFT polymerization suffer from limited aqueous solubility and tedious purification. Here we demonstrate the design of PET-RAFT photocatalyst from the reticular assembled Zr-porphyrinic metal-organic frameworks (MOFs), along with a biomacromolecule-based chain transfer agent, as efficient bioconjugation tools in water. Our methodology offers manufacturing advantages on bioconjugates under mild conditions such that MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) and cytotoxicity assays have shown the preservation of the protein integrity, bioactivity, and high cell viability after PET-RAFT polymerization. We find that the fast kinetics are benefiting from the ultrahigh loading of metalloporphyrins in MOF-525-Zn. This heterogeneous catalyst also allows us to maintain living characteristics to incorporate myriads of monomers into block copolymers. Other advantages like easy postreaction purification, reusability, and high oxygen tolerance even in an open system are demonstrated. This study provides a tool of highly efficient heterogeneous photocatalysts for polymer-protein bioconjugation in aqueous media and paves the road for biological applications.

Photomediated core modification of organic photoredox catalysts in radical addition: mechanism and applications

Dihydrophenazines and their analogues have been widely used as strong reducing photoredox catalysts in radical chemistry, such as organocatalyzed atom transfer radical polymerization (O-ATRP). However, when dihydrophenazines were employed as organic photoredox catalysts (OPCs) to mediate O-ATRP, the initiator efficiency was nonquantitative due to cross-coupling between dihydrophenazines and radical species. Here, a new kind of core modification for dihydrophenazines, phenoxazines and phenothiazines was developed through this cross-coupling process. Mechanistic studies suggested that the radical species would be more likely to couple with OPC' radical cations rather than the ground-state OPC. Core modification of OPCs could stabilize the radical ions in an oxidative quenching catalytic cycle. Significantly, core modifications of OPCs could lower the energy of light required for photoexcitation. Compared with their noncore-modified counterparts, all the core-modified dihydrophenazines and phenoxazines exhibited efficient performance in controlling O-ATRP for the synthesis of poly(methyl methacrylate) with higher initiator efficiencies under the irradiation of simulated sunlight.

Structure-Dependent Electron Transfer Rates for Dihydrophenazine, Phenoxazine, and Phenothiazine Photoredox Catalysts Employed in Atom Transfer Radical Polymerization

Organic photocatalysts (PCs) are gaining popularity in applications of photoredox catalysis, but few studies have explored their modus operandi. We report a detailed mechanistic investigation of the electron transfer activation step of organocatalyzed atom transfer radical polymerization (O-ATRP) involving electronically excited organic PCs and a radical initiator, methyl 2-bromopropionate (MBP). This study compares nine N-aryl modified PCs possessing dihydrophenazine, phenoxazine, or phenothiazine core chromophores. Transient electronic and vibrational absorption spectroscopies over subpicosecond to nanosecond and microsecond time intervals, respectively, track spectroscopic signatures of both the reactants and products of photoinduced electron transfer in N,N-dimethylformamide, dichloromethane, and toluene solutions. The rate coefficients for electron transfer exhibit a range of values up to ∼10¹⁰ M^-1 s^-1 influenced systematically by the PC structures. These rate coefficients are an order of magnitude smaller for catalysts with charge transfer character in their first excited singlet (S₁) or triplet (T₁) states than for photocatalysts with locally excited character. The latter species show nearly diffusion-limited rate coefficients for the electron transfer to MBP. The derived kinetic parameters are used to model the contributions to electron transfer from the S₁ state of each PC for different concentrations of MBP. Comparisons of singlet and triplet reactivity for one of the phenoxazine PCs reveal that the rate coefficient k_ET(T₁) = (2.7 ± 0.3) × 10⁷ M^-1 s^-1 for electron transfer from the T₁ state is 2 orders of magnitude lower than that from the S₁ state, k_ET(S₁) = (2.6 ± 0.4) × 10⁹ M^-1 s^-1. The trends in bimolecular electron transfer rate coefficients are accounted for using a modified Marcus theory for dissociative electron transfer.