Regulating oxygen activity of perovskites to promote NOx oxidation and reduction kinetics

Engineering highly selective CO2 electroreduction in Cu-based perovskites through A-site cation manipulation

Perovskites exhibit considerable potential as catalysts for various applications, yet their performance modulation in the carbon dioxide reduction reaction (CO2RR) remains underexplored. In this study, we report a strategy to enhance the electrocatalytic carbon dioxide (CO2) reduction activity via Ce-doped La2CuO4 (LCCO) and Sr-doped La2CuO4 (LSCO) perovskite oxides. Specifically, compared to pure phase La2CuO4 (LCO), the Faraday efficiency (FE) for CH4 of LCCO at -1.4 V vs. RHE (reversible hydrogen electrode) is improved from 38.9% to 59.4%, and the FECO2RR of LSCO increased from 68.8% to 85.4%. In situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy spectra results indicate that the doping of A-site ions promotes the formation of *CHO and *HCOO, which are key intermediates in the production of CH4, compared to the pristine La2CuO4. X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and double-layer capacitance (Cdl) outcomes reveal that heteroatom-doped perovskites exhibit more oxygen vacancies and higher electrochemical active surface areas, leading to a significant improvement in the CO2RR performance of the catalysts. This study systematically investigates the effect of A-site ion doping on the catalytic activity center Cu and proposes a strategy to improve the catalytic performance of perovskite oxides.

Highly Dispersed Ni Atoms and O3 Promote Room-Temperature Catalytic Oxidation

Transition metal oxides are promising catalysts for catalytic oxidation reactions but are hampered by low room-temperature activities. Such low activities are normally caused by sparse reactive sites and insufficient capacity for molecular oxygen (O2) activation. Here, we present a dual-stimulation strategy to tackle these two issues. Specifically, we import highly dispersed nickel (Ni) atoms onto MnO2 to enrich its oxygen vacancies (reactive sites). Then, we use molecular ozone (O3) with a lower activation energy as an oxidant instead of molecular O2. With such dual stimulations, the constructed O3-Ni/MnO2 catalytic system shows boosted room-temperature activity for toluene oxidation with a toluene conversion of up to 98%, compared with the O3-MnO2 (Ni-free) system with only 50% conversion and the inactive O2-Ni/MnO2 (O3-free) system. This leap realizes efficient room-temperature catalytic oxidation of transition metal oxides, which is constantly pursued but has always been difficult to truly achieve.

Aqueous Electroreduction of Nitric Oxide to Ammonia at Low Concentration via Vacancy Engineered FeOCl

Electroreduction of nitric oxide (NO) to NH3 (NORR) has gained extensive attention for the sake of low carbon emission and air pollutant treatment. Unfortunately, NORR is greatly hindered by its sluggish kinetics, especially under low concentrations of NO. Herein, we developed a chlorine (Cl) vacancy strategy to overcome this limitation over FeOCl nanosheets (FeOCl-VCl ). Density functional theory (DFT) calculations revealed that the Cl vacancy resulted in defective Fe with sharp d-states characteristics in FeOCl-VCl to enhance the absorption and activation of NO. In situ X-ray absorption near-edge structure (XANES) and attenuated total reflection-infrared spectroscopy (ATR-IR) verified the lower average oxidation state of defective Fe to enhance the electron transfer for NO adsorption/activation and facilitate the generation of key NHO and NHx intermediates. As a result, the FeOCl-VCl exhibited superior NORR activities with the NH3 Faradaic efficiency up to 91.1 % while maintaining a high NH3 yield rate of 455.4 μg cm-2  h-1 under 1.0 vol % NO concentration, competitive with those of previously reported literatures under higher NO concentration. Further, the assembled Zn-NO battery utilizing FeOCl-VCl as cathode delivered a record peak power density of 6.2 mW cm-2 , offering a new route for simultaneous NO removal, NH3 production, and energy supply.

Enhancement of Pt-O Synergistic Sites through Titanium Vacancies for Low-Temperature Nitrogen Oxide Reduction

Improving the reaction rate of each step is significant for accelerating the multistep reaction of NO reduction by H2. However, simultaneously enhancing the activation of different gaseous reactants using single-atom catalysts remains a challenge to maximize the activity. Herein, we propose a strategy that utilizes titanium-vacancy-regulated electronic properties of single atoms and defective support (Pt1/d-TiO2) to facilitate electron transfer from edge-share O atoms (OTi) to adjacent Pt single atoms. This leads to the formation of low-valence Pt and unsaturated-charge OTi sites, which causes the catalytic reaction to follow a synergistic mechanism. Specifically, experimental and theoretical analyses demonstrate that low-valence Pt sites finely tune the adsorption of H2 molecules, consequently lowering the dissociation energy from 0.15 to as low as 0.01 eV. Moreover, using quasi-in situ spectroscopy, we clearly observe NO molecules being adsorbed on interfacial oxygen sites of a defective support. Then, the bond energy of the N-O bond is weakened through an electron acceptance-donation mechanism between unsaturated-charge OTi sites and NO, thereby facilitating NO activation. The designed single-atom catalysts with synergistic sites exhibit unmatched activity at low temperatures (above 90% NOx conversion at 100 °C), along with higher turnover frequency value (0.74 s-1) and superior stability, making them potentially suitable for industrial applications.

Facile H2O-Contributed O2 Activation Strategy over Mn-Based SCR Catalysts to Counteract SO2 Poisoning

Mn-based catalysts preferred in low-temperature selective catalytic reduction (SCR) are susceptible to SO2 poisoning. The stubborn sulfates make insufficient O2 activation and result in deficient reactive oxygen species (ROS) for activating reaction molecules. H2O has long been regarded as an accomplice to SO2, hastening catalyst deactivation. However, such a negative impression of the SCR reaction was reversed by our recent research. Here, we reported a H2O contribution over Mn-based SCR catalysts to counteract SO2 poisoning through accessible O2 activation, in which O2 was synergistically activated with H2O to generate ROS for less deactivation and more expected regeneration. The resulting ROS benefited from the energetically favorable route supported by water-induced Ea reduction and was actively involved in the NH3 activation and NO oxidation process. Besides, ROS maintained high stability over the SO2 + H2O-deactivated γ-MnO2 catalyst throughout the mild thermal treatment, achieving complete regeneration of its own NO disposal ability. This strategy was proven to be universally applicable to other Mn-based catalysts.

Quantifying the Two-Dimensional Driving Patterns of Chemisorbed Oxygen and Particle Size on NO Reduction Activity and Mechanism

Quantification in the driving patterns of activity descriptors on structure-activity relationships and reaction mechanisms over heterogeneous catalysts is still a great challenge and needs to be addressed urgently. Herein, with the example of typical Mn-based catalysts, based on the activity regularity and many characterizations, the chemisorbed oxygen density (ρ_Oβ) and particle size (d_TEM) have been proposed as the two-dimensional descriptors for selective catalytic reduction of NO, whose role is in quantifying the contents of vacancy defects and the amounts of active sites located on terraces or interfaces, respectively. They can be utilized to construct and quantify the driving patterns for the structure-activity relationships and reaction mechanisms of NO reduction. As a consequence, a complementary modulation for E_a by ρ_Oβ and d_TEM is described quantitatively in terms of the fitted functions. Moreover, based on the structure-activity relationships and the quantification laws of in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), the reaction efficiency (RE) of the specific combined NO_x-intermediate is identified as the trigger to drive the Langmuir-Hinshelwood mechanism and modulated by the descriptors complementally and collaboratively following the fitted quantification functions. Either of the two descriptors at its lower values plays a dominant role in regulating E_a and RE, and the dominant factor evolves progressively: d_TEM ↔ coupling d_TEM with ρ_Oβ ↔ ρ_Oβ, when the dependency of E_a and RE on the descriptors is adopted to identify the dominant factor and domains. Therefore, this work has quantitatively accounted for the essence of activity modulation and may provide insight into the quantitative driving patterns for reaction activity and mechanism.

Synergistic effect of cyano defects and CaCO3 in graphitic carbon nitride nanosheets for efficient visible-light-driven photocatalytic NO removal

Photo-oxidation with semiconductor photocatalysts provides a sustainable and green solution for NO_x elimination. Nevertheless, the utilization of traditional photocatalysts in efficient and safe photocatalytic NO_x removal is still a challenge due to the slow charge kinetic process and insufficient optical absorption. In this paper, we report a novel porous g-C₃N₄ nanosheet photocatalyst modified with cyano defects and CaCO₃ (xCa-CN). The best performing sample (0.5Ca-CN) exhibits an enhanced photo-oxidation NO removal rate (51.18 %) under visible light irradiation, largely surpassing the value of pristine g-C₃N₄ nanosheets (34.05 %). Such an enhancement is mainly derived from an extended visible-light response, improved electron excitation and transfer, which are associated with the synergy of cyano defects and CaCO₃, as evidenced by a series of spectroscopic analyses. More importantly, in-situ DRIFTS and density functional theory (DFT) results suggest that the introduction of cyano defects and CaCO₃ enables control over NO adsorption and activation processes, making it possible to implement a preference pathway (NO → NO⁺ → NO₃¯) and reduce the emission of toxic intermediate NO₂. This work demonstrates the potential of integrating defect engineering and insulator modification to design highly efficient g-C₃N₄-based photocatalysts for air purification.

Understanding of Oxygen Redox in the Oxygen Evolution Reaction

The electron-transfer process during the oxygen evolution reaction (OER) often either proceeds solely via a metal redox chemistry (adsorbate evolution mechanism (AEM), with metal bands around the Fermi level) or an oxygen redox chemistry (lattice oxygen oxidation mechanism (LOM), with oxygen bands around the Fermi level). Unlike the AEM, the LOM involves oxygen redox chemistry instead of metal redox, which leads to the formation of a direct oxygen-oxygen (OO) bond. As a result, such a process is able to bypass the rate-determining step, that is, OO bonding, in AEM, which highlights the critical advantage of LOM as compared to the conventional AEM. Thus, it has been well reported that LOM-based catalysts are able to demonstrate higher OER activities as compared to AEM-based catalysts. Here, a comprehensive understanding of the oxygen redox in LOM and all documented and possible characterization techniques that can be used to identify the oxygen redox are reviewed. This review will interpret the origins of oxygen redox in the reported LOM-based electrocatalysts and the underlying science of LOM-induced surface reconstruction in transition metal oxides. Finally, perspectives on the future development of LOM electrocatalysts are also provided.

Strong Electronic Orbit Coupling between Cobalt and Single-Atom Praseodymium for Boosted Nitrous Oxide Decomposition on Co3O4 Catalyst

Nitrous oxide (N₂O) has gained increasing attention as an important noncarbon dioxide greenhouse gas, and catalytic decomposition is an effective method of reducing its emissions. Here, Co₃O₄ was synthesized by the sol-gel method and single-atom Pr was confined in its matrix to improve the N₂O decomposition performance. It was observed that the reaction rate varied in a volcano-like pattern with the amount of doped Pr. A N₂O decomposition reaction rate 5-7.5 times greater than that of pure Co₃O₄ is achieved on the catalyst with a Pr/Co molar ratio of 0.06:1, and further Pr doping reduced the activity due to PrO_x cluster formation. Combined with X-ray photoelectron spectroscopy, X-ray absorption fine structure, density functional theory and in situ near-ambient pressure X-ray photoelectron spectroscopy, it was demonstrated that the single-atom doped Pr in Co₃O₄ generates the "Pr 4f-O 2p-Co 3d" network, which redistributes the electrons in Co₃O₄ lattice and increases the t_2g electrons at the tetracoordinated Co²⁺ sites. This coupling between the Pr 4f orbit and Co²⁺ 3d orbit triggers the formation of a 4f-3d electronic ladder, which accelerates the electron transfer from Co²⁺ to the 3π* antibonding orbital of N₂O, thus contributing to the N-O bond cleavage. Moreover, the energy barrier for each elementary reaction in the decomposition process of N₂O is reduced, especially for O₂ desorption. Our work provides a theoretical grounding and reference for designing atomically modified catalysts for N₂O decomposition.

Compressive-Strain-Facilitated Fast Oxygen Migration with Reversible Topotactic Transformation in La0.5Sr0.5CoOx via All-Solid-State Electrolyte Gating

Modifying the crystal structure and corresponding functional properties of complex oxides by regulating their oxygen content has promising applications in energy conversion and chemical looping, where controlling oxygen migration plays an important role. Therefore, finding an efficacious and feasible method to facilitate oxygen migration has become a critical requirement for practical applications. Here, we report a compressive-strain-facilitated oxygen migration with reversible topotactic phase transformation (RTPT) in La_0.5Sr_0.5CoO_x films based on all-solid-state electrolyte gating modulation. With the lattice strain changing from tensile to compressive strain, significant reductions in modulation duration (∼72%) and threshold voltage (∼70%) for the RTPT were observed, indicating great promotion of RTPT by compressive strain. Density functional theory calculations verify that such compressive-strain-facilitated efficient RTPT comes from significant reduction of the oxygen migration barrier in compressive-strained films. Further, ac-STEM, EELS, and sXAS investigations reveal that varying strain from tensile to compressive enhances the Co 3d band filling, thereby suppressing the Co-O hybrid bond in oxygen vacancy channels, elucidating the micro-origin of such compressive-strain-facilitated oxygen migration. Our work suggests that controlling electronic orbital occupation of Co ions in oxygen vacancy channels may help facilitate oxygen migration, providing valuable insights and practical guidance for achieving highly efficient oxygen-migration-related chemical looping and energy conversion with complex oxides.

Engineering surface segregation of perovskite oxide through wet exsolution for CO catalytic oxidation

Cation segregation occurring near the surface or interfaces of solid catalysts plays an important role in catalytic reactions. Unfortunately, the native surface of perovskite oxides is dominated by passivated A-site segregation, which severely hampers the catalytic activity and durability of the system. To address this issue, herein, we present a wet exsolution method to reconstruct surface segregation in perovskite cobalt oxide. Under reduction etching treatment of glycol solution, inert surface Sr segregation was transformed into active Co₃O₄ segregation. By varying the reaction time, we achieved differing coverage of the active Co₃O₄ segregation on the La_0.5Sr_0.5CoO_3-δ (LSCO) perovskite oxide surface. This study reveals that CO oxidation activity exhibits a volcano-shaped dependence on the coverage of Co₃O₄ segregation at the surface of a perovskite cobalt oxide. Furthermore, we find that a suitable coverage of Co₃O₄ segregation can dramatically improve the catalytic activity of the perovskite catalyst by enhancing interface interactions. Co K-edge, Co L-edge, and O K-edge X-ray absorption spectra confirm that the synergistic effect optimizes the covalence of the metal-oxygen bond at the surface and interface. This work not only contributes to the design and development of perovskite-type catalysts, but also provides important insight into the relationship between surface segregation and catalytic activity.

Surface Oxygen Vacancies Confined by Ferroelectric Polarization for Tunable CO Oxidation Kinetics

Surface oxygen vacancies have been widely discussed to be crucial for tailoring the activity of various chemical reactions from CO, NO, to water oxidation by using oxide-supported catalysts. However, the real role and potential function of surface oxygen vacancies in the reaction remains unclear because of their very short lifetime. Here, it is reported that surface oxygen vacancies can be well confined electrostatically for a polarization screening near the perimeter interface between Pt {111} nanocrystals and the negative polar surface (001) of ferroelectric PbTiO_3. Strikingly, such a catalyst demonstrates a tunable catalytic CO oxidation kinetics from 200 °C to near room temperature by increasing the O₂ gas pressure, accompanied by the conversion curve from a hysteresis-free loop to one with hysteresis. The combination of reaction kinetics, electronic energy loss spectroscopy (EELS) analysis, and density functional theory (DFT) calculations, indicates that the oxygen vacancies stabilized by the negative polar surface are the active sites for O₂ adsorption as a rate-determining step, and then dissociated O moves to the surface of the Pt nanocrystals for oxidizing adsorbed CO. The results open a new pathway for tunable catalytic activity of CO oxidation.

Promoting biomass electrooxidation via modulating proton and oxygen anion deintercalation in hydroxide

The redox center of transition metal oxides and hydroxides is generally considered to be the metal site. Interestingly, proton and oxygen in the lattice recently are found to be actively involved in the catalytic reactions, and critically determine the reactivity. Herein, taking glycerol electrooxidation reaction as the model reaction, we reveal systematically the impact of proton and oxygen anion (de)intercalation processes on the elementary steps. Combining density functional theory calculations and advanced spectroscopy techniques, we find that doping Co into Ni-hydroxide promotes the deintercalation of proton and oxygen anion from the catalyst surface. The oxygen vacancies formed in NiCo hydroxide during glycerol electrooxidation reaction increase d-band filling on Co sites, facilitating the charge transfer from catalyst surface to cleaved molecules during the 2^nd C-C bond cleavage. Consequently, NiCo hydroxide exhibits enhanced glycerol electrooxidation activity, with a current density of 100 mA/cm² at 1.35 V and a formate selectivity of 94.3%.

Developing catalysts for biomass electrooxidation are critical in electric refinery. The reaction mechanism, however, is still ambiguous. Here, the authors reveal how proton and oxygen anion deintercalation in hydroxide determine the elementary reaction steps in a model reaction of glycerol oxidation.

Trends in Surface Oxygen Formation Energy in Perovskite Oxides

Perovskite oxides comprise an important class of materials, and some of their applications depend on the surface reactivity characteristics. We calculated, using density functional theory, the surface O vacancy formation energy (E _Ovac) for perovskite-structure oxides, with a transition metal (Ti-Fe) as the B-site cation, to estimate the catalytic reactivity of perovskite oxides. The E _Ovac value correlated well with the band gap and bulk formation energy, which is a trend also found in other oxides. A low E _Ovac value, which is expected to result in higher catalytic activity via the Mars-van Krevelen mechanism, was found in metallic perovskites such as CaCoO₃, BaFeO₃, and SrFeO₃. On the other hand, titanates had high E _Ovac values, typically exceeding 4 eV/atom, suggesting that these materials are less reactive when O vacancy formation is involved in the reaction mechanism.

Ion Intercalation in Lanthanum Strontium Ferrite for Aqueous Electrochemical Energy Storage Devices

Ion intercalation of perovskite oxides in liquid electrolytes is a very promising method for controlling their functional properties while storing charge, which opens up its potential application in different energy and information technologies. Although the role of defect chemistry in oxygen intercalation in a gaseous environment is well established, the mechanism of ion intercalation in liquid electrolytes at room temperature is poorly understood. In this study, the defect chemistry during ion intercalation of La_0.5Sr_0.5FeO_3-δ thin films in alkaline electrolytes is studied. Oxygen and proton intercalation into the La_1-xSr_xFeO_3-δ perovskite structure is observed at moderate electrochemical potentials (0.5 to -0.4 V), giving rise to a change in the oxidation state of Fe (as a charge compensation mechanism). The variation of the concentration of holes as a function of the intercalation potential is characterized by in situ ellipsometry, and the concentration of electron holes is indirectly quantified for different electrochemical potentials. Finally, a dilute defect chemistry model that describes the variation of defect species during ionic intercalation is developed.

Activating lattice oxygen in NiFe-based (oxy)hydroxide for water electrolysis

Transition metal oxides or (oxy)hydroxides have been intensively investigated as promising electrocatalysts for energy and environmental applications. Oxygen in the lattice was reported recently to actively participate in surface reactions. Herein, we report a sacrificial template-directed approach to synthesize Mo-doped NiFe (oxy)hydroxide with modulated oxygen activity as an enhanced electrocatalyst towards oxygen evolution reaction (OER). The obtained MoNiFe (oxy)hydroxide displays a high mass activity of 1910 A/g_metal at the overpotential of 300 mV. The combination of density functional theory calculations and advanced spectroscopy techniques suggests that the Mo dopant upshifts the O 2p band and weakens the metal-oxygen bond of NiFe (oxy)hydroxide, facilitating oxygen vacancy formation and shifting the reaction pathway for OER. Our results provide critical insights into the role of lattice oxygen in determining the activity of (oxy)hydroxides and demonstrate tuning oxygen activity as a promising approach for constructing highly active electrocatalysts.

Interaction Mechanism for Simultaneous Elimination of Nitrogen Oxides and Toluene over the Bifunctional CeO2-TiO2 Mixed Oxide Catalyst

Simultaneous catalytic elimination of nitrogen oxides (NO_x, x = 1 and 2) and volatile organic compounds (VOCs) is of great importance for environmental preservation in China. In this work, the interactions of simultaneous removal of NO_x and methylbenzene (PhCH₃) were investigated on a CeO₂-TiO₂ mixed oxide catalyst, which demonstrated excellent bifunctional removal efficiencies for the two pollutants. The results indicated that NO_x positively promotes PhCH₃ oxidation, while NH₃ negatively inhibits through competitive adsorption with PhCH₃. The underlying mechanism is that a pseudo PhCH₃-SCR reaction happened in this process is parallel to NH₃-SCR. Combined with in situ diffuse reflectance infrared Fourier transform spectroscopy and quasi in situ X-ray photoelectron spectroscopy, the interaction mechanism between NO_x and PhCH₃ is proposed. Specifically, NO_x is adsorbed on the catalyst surface to produce nitrate species, which reacts with the carboxylate generated during PhCH₃ oxidation to form organic nitrogen intermediates that create N₂ and CO₂ in the following reactions. In the reaction process, the superoxide (O₂^-) generated by O₂ activation on the catalyst surface is an important species for the propelling of oxidation reaction. This work could provide guidelines for the design of state-of-the-art catalysts for simultaneous catalytic removal of NO_x and VOCs.

Activating Surface Lattice Oxygen of a Cu/Zn1-xCuxO Catalyst through Interface Interactions for CO Oxidation

Surface lattice oxygen in metal oxides is a common participant in many chemical reactions. Given this, the structural design of catalysts to activate lattice oxygen and moreover investigations into the effect of lattice oxygen on reaction pathways are hot topics. With this in mind, herein we prepare CuO-Zn_1-xCu_xO (ZCO) nanofibers akin to the Trojan horse legend and via an in situ reduction obtain activated Cu/Zn_1-xCu_xO (Cu/ZCO) nanofibers. X-ray absorption spectroscopy and X-ray photoelectron spectroscopy reveal that surface lattice oxygen of Cu/ZCO is effectively activated from inert O^2- to reactive O^2-x. This activation stems from the enhanced covalence of metal-oxygen bonds and the electron transfer between Cu and the support. Online mass spectrometry reveals that Cu/ZCO with activated lattice oxygen exhibits a higher Mars-van Krevelen reaction efficiency during the CO oxidation process. This study offers a new avenue to engineer interface interactions, given, as highlighted here, the importance of surface lattice oxygen in oxide supports during the catalytic process.

Electronic Structure-Based Descriptors for Oxide Properties and Functions

ConspectusThe transition from fossil fuels to renewable energy requires the development of efficient and cost-effective energy storage technologies. A promising way forward is to harness the energy of intermittent renewable sources, such as solar and wind, to perform (electro)catalytic reactions to generate fuels, thus storing energy in the form of chemical bonds. However, current catalysts rely on the use of expensive, rare, or geographically localized elements, such as platinum. Widespread adoption of new (electro)catalytic technologies hinges on the discovery and development of materials containing earth-abundant elements, which can efficiently catalyze an array of (electro)chemical reactions.In the context of catalysis, descriptors provide correlations between fundamental physical properties, such as the electronic structure, and the resulting catalytic activity. The use of easily accessible descriptors has proven to be a powerful method to advance and accelerate discovery and design of new catalyst materials. The position of the oxygen electronic 2p band center has been proposed to capture the basic physical properties of oxides, including oxygen vacancy formation energy, diffusion barrier of oxygen ions, and work function. Moreover, the adsorption strength of relevant reaction intermediates at the surface of oxides can be strongly correlated with the energy of the oxygen 2p states, which affects the catalytic activity of reactions, such as oxygen electrocatalysis, and oxidative dehydrogenation of organic molecules. Such descriptors for catalytic activity can be used to predict the activity of new catalysts and understand trends and behavior among different catalysts.In this Account, we discuss how the energy of the oxygen 2p states can be used as a descriptor for oxide bulk and surface chemical properties. We show how the oxide redox properties vary linearly with the position of the oxygen 2p band center with respect to the Fermi level, and we discuss how this descriptor can be expanded across different materials and structural families, including possible generalizations to compounds outside oxides. We highlight the power of the oxygen 2p band center to predict the catalytic activity of oxides. We conclude with an outlook examining under which conditions this descriptor can be applied to predict oxide properties and possible opportunities for further refining and accelerating property predictions of oxides by leveraging material databases and machine learning.

Synergistic Effects of a CeO2/SmMn2O5-H Diesel Oxidation Catalyst Induced by Acid-Selective Dissolution Drive the Catalytic Oxidation Reaction

A diesel oxidation catalyst (DOC) is installed upstream of an exhaust after-treatment line to remove CO and hydrocarbons and generate NO₂. The catalyst should possess both good oxidation ability and thermal stability because it sits after the engine. We present a novel high-performance DOC with high steam resistance and thermal stability. A selective dissolution method is adopted to modify the surface physicochemical environment of CeO₂-SmMn₂O₅. The X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, Raman, electron paramagnetic resonance, hydrogen temperature-programmed reduction, and temperature-programmed desorption results reveal that surface Sm cations are partially removed with the exposure of more Mn⁴⁺ and Ce³⁺ cations and the presence of active surface oxygen species. This mechanism benefits the oxygen transformation from Ce to Mn and promotes the Ce³⁺ + Mn⁴⁺ ↔ Ce⁴⁺ + Mn³⁺ redox cycle according to the in situ near-ambient pressure X-ray photoelectron spectroscopy and in situ diffuse reflectance infrared Fourier transformation spectroscopy results. Under laboratory-simulated diesel combustion conditions, the catalyst demonstrates excellent low-temperature oxidation catalytic activity (CO and C₃H₆ conversion: T₁₀₀ = 250 °C) compared to a Pt-based catalyst (CO and C₃H₆ conversion: T₁₀₀ = 310 °C) with a WHSV of 120,000 mL g^-1 h^-1. Specifically, NO conversion reaches 68% when the temperature is approximately 300 °C.

Facilitating Catalytic Purification of Auto-Exhaust Carbon Particles via the Fe2O3{113} Facet-dependent Effect in Pt/Fe2O3 Catalysts

The purification efficiency of auto-exhaust carbon particles in the catalytic aftertreatment system of vehicle exhaust is strongly dependent on the interface nanostructure between the noble metal component and oxide supports. Herein, we have elaborately synthesized the catalysts (Pt/Fe₂O₃-R) of Pt nanoparticles decorated on the hexagonal bipyramid α-Fe₂O₃ nanocrystals with co-exposed twelve {113} and six {104} facets. The area ratios (R) of co-exposed {113} to {104} facets in α-Fe₂O₃ nanocrystals were adjusted by the fluoride ion concentration in the hydrothermal method. The strong Pt-Fe₂O₃{113} facet interaction boosts the formation of coordination unsaturated ferric sites for enhancing adsorption/activation of O₂ and NO. Pt/Fe₂O₃-R catalysts exhibited the Fe₂O₃{113} facet-dependent performance during catalytic purification of soot particles in the presence of H₂O. Among the catalysts, the Pt/Fe₂O₃-19 catalyst exhibits the highest catalytic activities (T₅₀ = 365 °C, TOF = 0.13 h^-1), the lowest apparent activation energy (69 kJ mol^-1), and excellent catalytic stability during soot purification. Combined with the results of characterizations and density functional theory calculations, the catalytic mechanism is proposed: the active sites located at the Pt-Fe₂O₃{113} interface can boost the key step of NO oxidation to NO₂. The crystal facet engineering is an effective strategy to obtain efficient catalysts for soot purification in practical applications.