Lewis acid-mediated Suzuki–Miyaura cross-coupling reaction

Palladium(II) and Platinum(II) Complexes Bearing ONS-Type Pincer Ligands: Synthesis, Characterization and Catalytic Investigations

This work describes the synthesis of eight new Pd(II) and Pt(II) complexes with the general formula [M(TSC)Cl], where TSC represents the 4N-monosubstituted thiosemicarbazone derived from 2-acetylpyridine N-oxide with the substituents CH3 (H4MLO), C2H5 (H4ELO), phenyl (H4PLO) and (CH3)2 (H4DMLO). These complexes have been characterized by elemental analysis, molar conductivity, IR spectroscopy, 1H, 13C, 195Pt and ESI-MS. The complexes exhibit a square planar geometry around the metallic center coordinated by a thiosemicarbazone molecule acting as a donor ONS-type pincer ligand and by a chloride, as confirmed by the molecular structures of the complexes, [Pd(4ELO)Cl] (3) and [Pd(4PLO)Cl] (5), determined by single-crystal X-ray diffraction. The 195Pt NMR spectra of the complexes of formulae [Pt(4PLO)Cl] (6) and [Pt(4DMLO)Cl] (8) in DMSO show a single signal at -2420.4 ppm, confirming the absence of solvolysis products. Complexes 3 and 5 have been tested as catalysts in the Suzuki-Miyaura cross-coupling reactions of aryl bromides with phenylboronic acid, with yields of between 50 and 90.

Recyclable LaF3·Pd nanocatalyst in Suzuki coupling: green synthesis of biaryls from haloarenes and phenylboronic acids

Herein we prepared the novel LaF3·Pd nanocatalyst characterized by XRD and TEM analysis. The nanocatalyst was applied in Suzuki coupling reaction for the synthesis of biaryls in aqueous medium from readily available aryl halides (bromides and iodides) and substituted phenylboronic acids in the presence of K2CO3 as the base at 70 °C. The present method is capable of giving the C-C coupled product in good to excellent yields (up to 97%). The reactions were conducted under green conditions in aqueous medium and the nanocatalyst used in this study was recyclable. The recyclability and reusability of the catalyst was checked for seven consecutive cycles without significant loss in reactivity.

Pd(II)-Catalyzed Site-Selective Cross Coupling Reaction: Synthesis of Highly Fluorescent Aryl-Formyl-Chromenes and its Iminoantipyrine Analogues as Selective AChE Inhibitors

A versatile and efficient chemo selective synthesis of 4-aryl-3-formyl-2H-chromenes (AFC) was undertaken using Pd-catalyzed cross-coupling conditions. The key oxidative transmetalation was successfully applied to a significant range of substitutions on the chromene moiety and aryl ring in Ar(BOH)3, accommodating both electron-rich and electron-deficient groups. These π-extended scaffolds exhibited green-yellow fluorescence with a large Stokes shift and high quantum yield. Measurement of photophysical properties revealed that the compound with methoxy substitution in the chromene ring, 3t, caused a significant bathochromic shift. The AFCs obtained from this method can be transformed into biologically active 4-aryl-3-iminoantipyrine-2H-chromenes (AAC) through functionalization of the formyl chromenes. The AFCs and AACs with methoxy substitutions (3t and 4e) were docked against AChE inhibition, and compound 4e had the lowest binding energy of -11.20 kcal/mol. DFT calculations performed on representative compounds revealed that compound 4e is more reactive than 3t, which is in accordance with the docking studies.

Regio- and Enantioselective Hydromethylation of 3-Pyrrolines and Glycals Enabled by Cobalt Catalysis

Enantioenriched 3-methylpyrrolidine, with its unique chiral nitrogen-containing core skeleton, exists widely in various functional molecules, including natural products, bioactive compounds, and pharmaceuticals. Traditional methods for synthesizing these valuable methyl-substituted heterocycles often involve enzymatic processes or complex procedures with chiral auxiliaries, limiting the substrate scope and efficiency. Efficient catalytic methylation, especially in an enantioselective manner, has been a long-standing challenge in chemical synthesis. Herein, we present a novel approach for the remote and stereoselective installation of a methyl group onto N-heterocycles, leveraging a CoH-catalyzed asymmetric hydromethylation strategy. By effectively combining a commercial cobalt precursor with a modified bisoxazoline (BOX) ligand, a variety of easily accessible 3-pyrrolines can be converted to valuable enantiopure 3-(isotopic labeling)methylpyrrolidine compounds with outstanding enantioselectivity. This efficient protocol streamlines the two-step synthesis of enantioenriched 3-methylpyrrolidine, which previously required up to five or six steps under harsh conditions or expensive starting materials.

General room-temperature Suzuki-Miyaura polymerization for organic electronics

π-Conjugated polymers (CPs) have broad applications in high-performance optoelectronics, energy storage, sensors and biomedicine. However, developing green and efficient methods to precisely synthesize alternating CP structures on a large scale remains challenging and critical for their industrialization. Here a room-temperature, scalable and homogeneous Suzuki-Miyaura-type polymerization reaction is developed with broad generality validated for 24 CPs including donor-donor, donor-acceptor and acceptor-acceptor connectivities, yielding device-quality polymers with high molecular masses. Furthermore, the polymerization protocol significantly reduces homocoupling structural defects, yielding more structurally regular and higher-performance electronic materials and optoelectronic devices than conventional thermally activated polymerizations. Experimental and theoretical studies reveal that a borate transmetalation process plays a key role in suppressing protodeboronation, which is critical for large-scale structural regularity. Thus, these results provide a general polymerization tool for the scalable production of device-quality CPs with alternating structural regularity.

Anhydrous and Stereoretentive Fluoride-Enhanced Suzuki-Miyaura Coupling of Immunomodulatory Imide Drug Derivatives

Immunomodulatory imide drugs form the core of many pharmaceutically relevant structures, but Csp2-Csp2 bond formation via metal-catalyzed cross coupling is difficult due to the sensitivity of the glutarimide ring ubiquitous in these structures. We report that replacement of the traditional alkali base with a fluoride source enhances a previously challenging Suzuki-Miyaura coupling on glutarimide-containing compounds with trifluoroborates. These enabling conditions are reactive enough to generate these derivatives in high yields but mild enough to preserve both the glutarimide and its sensitive stereocenter. Experimental and computational data suggest a mechanistically distinct process of π-coordination of the trifluoroborate enabled by these conditions.

Palladium(II)-immobilized Triptycene based Hypercrosslinked Polymers: An Efficient, Green, and Reusable Heterogenous Catalyst for Suzuki-Miyaura Cross-coupling Reaction

The Suzuki-Miyaura cross-coupling (SMCC) involves the coupling of organohalides and organoboron molecules in the presence of Pd(II)-based catalysts. Often SMCC reactions employ homogenous catalysts. However, such homogenous SMCC reactions are associated with certain limitations which has motivated design of effective and sustainable Pd(II)-based heterogeneous catalytic systems. Herein, we report a systematic development of a Pd(II)-immobilized and triptycene based ionic hyper crosslinked polymer (Pd@TP-iHCP) and explored its application as a heterogeneous catalyst for SMCC reaction. Pd@TP-iHCP has ample N-heterocyclic carbene (NHC) pendants that anchor Pd(II) centres on the polymeric matrix. Pd@TP-iHCP was characterized satisfactorily using FT-IR, 13 C CP-MAS NMR, BET surface area analysis, SEM, EDX and HRTEM. The performance of Pd@TP-iHCP as a heterogeneous catalyst for SMCC reactions was explored using various combinations of aryl boronic acids and aryl halides. Experimental results show that Pd@TP-iHCP is associated with a moderately high surface area. It is an efficient catalyst for SMCC (in aqueous media) with a modest loading of 0.8 mol % Pd(II)-catalyst since high yields of the expected products were obtained in shorter time intervals. Pd@TP-iHCP also features excellent stability and catalyst recyclability since it could be re-used for several cycles without any significant decrease in catalytic efficiency.

Palladium-Catalyzed ipso-Borylation of Aryl Halides Promoted by Lewis Acid-Mediated Electrophilic Activation of Aryl(halo)palladium(II) Complex

Palladium-catalyzed ipso-borylation of aryl halides, well-known as Miyaura borylation, is one of the reliable synthetic methods for organoborons. This reaction involves base-mediated nucleophilic activation of diboron that enables transmetalation of an aryl(halo)palladium(II) intermediate with a diboron. As an alternative, herein, we have established Lewis acid-mediated conditions for borylating (pseudo)haloarenes that require no external base. The electrophilic activation of the aryl(halo)palladium(II) intermediate via dehalogenation with Lewis acidic zinc complexes promotes the borylation.

Palladium and Iron Cocatalyzed Aerobic Alkene Aminoboration

Aminoboration of simple alkenes with nitrogen nucleophiles remains an unsolved problem in synthetic chemistry; this transformation can be catalyzed by palladium via aminopalladation followed by transmetalation with a diboron reagent. However, this catalytic process faces inherent challenges with instability of the alkylpalladium(II) intermediate toward β-hydride elimination. Herein, we report a palladium/iron cocatalyzed aminoboration, which enables this transformation. We demonstrate these conditions on a variety of alkenes and norbornenes with an array of common nitrogen nucleophiles. In the developed strategy, the iron cocatalyst is crucial to achieving the desired reactivity by serving as a halophilic Lewis acid to release the transmetalation-active cationic alkylpalladium intermediate. Furthermore, it serves as a redox shuttle in the regeneration of the Pd(II) catalyst by reactivation of nanoparticulate palladium.

Stereospecific Acylative Suzuki–Miyaura Cross-Coupling: General Access to Optically Active α-Aryl Carbonyl Compounds

A novel strategy for the stereospecific Pd-catalyzed acylative cross-coupling of enantiomerically enriched alkylboron compounds has been developed. The protocol features an extremely high level of enantiospecificity to allow facile access to synthetically challenging and valuable chiral ketones and carboxylic acid derivatives. The use of a sterically encumbered and electron-rich phosphine ligand proved to be crucial for the success of the reaction. Furthermore, on the basis of experimental and computational studies, a unique mechanism for the transmetalation, assisted by the noncovalent interactions of the C(sp³)-based organoboron reagent, has been identified.

Palladium nanoparticles-confined pore-engineered urethane-linked thiol-functionalized covalent organic frameworks: a high-performance catalyst for the Suzuki Miyaura cross-coupling reaction

Covalent organic frameworks (COFs) are potential templates for the synthesis of nanomaterials owing to the versatility of their structure. Most of the reported COFs comprise imine linkages. Herein, we report for the first time the synthesis of a urethane-linked COF (UCOF) using monoformylphloroglucinol and 1,4-phenylene diisocyanate as monomers. Furthermore, the UCOF was functionalized with cysteamine to introduce free dangling thiol groups into the cavity. The latter played a critical role in fixing the active metal efficiently and facilitating the confined growth of small metal nanoparticles (∼4-6 nm) with a high surface area leading to a pore-engineered heterogeneous Pd catalyst (PdNPs@UCOF-SH). The COF and Pd catalyst were characterized using various analytical techniques such as CP-MAS NMR, FTIR, PXRD, BET, FEG-SEM, HRTEM, XPS, TGA, and ICP-AES. The as-prepared UCOF-SH-supported Pd nanoparticles showed excellent catalytic activity in the Suzuki Miyaura cross-coupling reaction under mild conditions with low catalyst loading and eco-friendly solvents. The scope was extended to various aryl boronic acids and aryl halides (I, Br, and Cl). The halo-substituted and non-halo biaryl derivatives were obtained in good to excellent yields, within a shorter reaction time, avoiding the homocoupling of aryl boronic acid. The pore-engineered COF-derived catalyst is selective and easily recycled up to 10 runs without significant loss of catalytic activity. This reveals the robust nature of the PdNPs@UCOF-SH catalyst and the sustainability of the process which opens a new frontier for several catalytic applications.

Aryl Dance Reaction of Arylbenzoheteroles

We report a 1,2-migration (aryl dance reaction) of the aryl group on heteroles. AlCl3 can efficiently convert C3-arylheteroles to C2-arylheteroles. Depending on the electron density of the substrate, conversion from C2- to C3-arylheteroles was also possible with catalytic Zn(OTf)2. A one-pot aryl dance/acylation or bromination and arylation/aryl dance cascade was also demonstrated.

Size-Selective Suzuki-Miyaura Coupling Reaction over Ultrafine Pd Nanocatalysts in a Water-Stable Indium-Organic Framework

Metal nanoparticles stabilized by crystalline metal-organic frameworks (MOFs) are highly promising for green heterogeneous catalysis. In this work, in situ formed ultrafine Pd nanocatalysts with an average size of 3.14 nm have been successfully immobilized into the mesopores or defects of a water-stable indium-based MOF by the double-solvent method and subsequent reduction. Significantly, the obtained Pd@InOF-1 displays an obvious and satisfactory size-selective effect in the Suzuki-Miyaura coupling reaction between arylboronic acids and aryl bromides. On the basis of the synergistic effect, microporous InOF-1 nanorods afford a confined space for improving the selectivity of target products while Pd nanoparticles endow abundant active sites for catalysis. Herein, choosing the smallest size reactant with only one benzene ring gives the highest isolated yield of 90%, and if the size is larger, the yield is obviously reduced or even the target product could not be collected. Looking forward, this demonstrated study not only assembles a well-designed Pd@MOF composite with unique micro-nanostructures but also delivers an impressive option for cross-coupling reaction, which has implications for the further development of MOF hybrids for sustainable applications.

Aryl Boronic Esters Are Stable on Silica Gel and Reactive under Suzuki-Miyaura Coupling Conditions

A wide range of aryl boronic 1,1,2,2-tetraethylethylene glycol esters [ArB(Epin)s] were readily synthesized. Purifying aryl boronic esters by conventional silica gel chromatography is generally challenging; however, these introduced derivatives are easily purified on silica gel and isolated in excellent yields. We subjected the purified ArB(Epin) to Suzuki-Miyaura couplings, which provided higher yields of the desired biaryl products than those obtained using the corresponding aryl boronic acids or pinacol esters.