Probing the temperature of supported platinum nanoparticles under microwave irradiation by in situ and operando XAFS

Accelerating Sulfated Polysaccharides Extraction from Fast-Growing Ulva Green Seaweed by Frequency-Controlled Microwaves

Ulva sp. is a type of green algae and is widely distributed in coastal areas around the world due to eutrophication. Effective utilization of Ulva sp. is expected for the establishment of carbon-neutral biochemical production. Microwave-assisted hydrothermal extraction is one of the most efficient ways of extracting highly functional polysaccharides called ulvan. Here, we demonstrate the importance of microwave frequency in enhancing ulvan extraction from Ulva meridionalis. We found that microwaves (2.45 GHz) selectively heat water solvent, while radio frequency (200 MHz) selectively heats ionic ulvan. Moreover, 2.45 GHz was more effective for extracting ulvan than 200 MHz. Then, we analyzed the conformational change in ulvan during microwave irradiation using in situ small-angle X-ray scattering. Microwaves initiated the loosening of ulvan bundles at temperatures lower than those of conventional heating. As a result, microwaves at 2.45 GHz selectively heat water and initiate ulvan structural change to enhance the extraction of ulvan from U. meridionalis.

X-Ray Nanothermometry of Nanoparticles in Tumor-Mimicking Tissues under Photothermia

Temperature plays a critical role in regulating body mechanisms and indicating inflammatory processes. Local temperature increments above 42 °C are shown to kill cancer cells in tumorous tissue, leading to the development of nanoparticle-mediated thermo-therapeutic strategies for fighting oncological diseases. Remarkably, these therapeutic effects can occur without macroscopic temperature rise, suggesting localized nanoparticle heating, and minimizing side effects on healthy tissues. Nanothermometry has received considerable attention as a means of developing nanothermosensing approaches to monitor the temperature at the core of nanoparticle atoms inside cells. In this study, a label-free, direct, and universal nanoscale thermometry is proposed to monitor the thermal processes of nanoparticles under photoexcitation in the tumor environment. Gold-iron oxide nanohybrids are utilized as multifunctional photothermal agents internalized in a 3D tumor model of glioblastoma that mimics the in vivo scenario. The local temperature under near-infrared photo-excitation is monitored by X-ray absorption spectroscopy (XAS) at the Au L3 -edge (11 919 eV) to obtain their temperature in cells, deepening the knowledge of nanothermal tumor treatments. This nanothermometric approach demonstrates its potential in detecting high nanothermal changes in tumor-mimicking tissues. It offers a notable advantage by enabling thermal sensing of any element, effectively transforming any material into a nanothermometer within biological environments.

Three-dimensional observations of the electric field distribution of variable frequency microwaves, and scaling-up organic syntheses

Variable Frequency Microwave (VFM) radiation provides a solution to the inhomogeneity of the electric field in the cavity, which has long led to a decline in the reliability of microwave chemical data and its industrial utilization. Herein, we report in-situ three-dimensional experimental measurements of the electric field's uniform distribution of VFMs within a multimode cavity under high power conditions, and their subsequent comparison to Fixed Frequency Microwaves (FFM) that could only be assessed earlier through theoretical analysis. We also examine the consequences of changes in VFM irradiation conditions and elucidate the threshold at which VFM irradiation might prove beneficial in syntheses. With an ultimate focus on the use of VFM microwave radiation toward industrial applications, we carried out an effective synthesis of 4-methylbyphenyl (4-MBP) in the presence of palladium (the catalyst) supported on activated carbon particulates (Pd/AC), and revisited two principal objectives: (a) the effective suppression of discharge phenomena (formation of hot spots), and (b) synthesis scale-up using a 5-fold increase in sample quantity and a 7.5-fold larger reactor size (diameter) than otherwise used in earlier studies.

Microwave-assisted, performance-advantaged electrification of propane dehydrogenation

Nonoxidative propane dehydrogenation (PDH) produces on-site propylene for value-added chemicals. While commercial, its modest selectivity and catalyst deactivation hamper the process efficiency and limit operation to lower temperatures. We demonstrate PDH in a microwave (MW)-heated reactor over PtSn/SiO2 catalyst pellets loaded in a SiC monolith acting as MW susceptor and a heat distributor while ensuring comparable conditions with conventional reactors. Time-on-stream experiments show active and stable operation at 500°C without hydrogen addition. Upon increasing temperature or feed partial pressure at high space velocity, catalysts under MWs show resistance in coking and sintering, high activity, and selectivity, starkly contrasting conventional reactors whose catalyst undergoes deactivation. Mechanistic differences in coke formation are exposed. Gas-solid temperature gradients are computationally investigated, and nanoscale temperature inhomogeneities are proposed to rationalize the different performances of the heating modes. The approach highlights the great potential of electrification of endothermic catalytic reactions.

Direct microwave energy input on a single cation for outstanding selective catalysis

Microwave (MW)-driven catalytic systems are attracting attention not only as an aggressive electrification strategy of the chemical industry but also as creating a unique catalytic reaction field that conventional equilibrium heating cannot achieve. This study unlocked direct and selective heating of single alkali metal cations in the pores of aluminosilicate zeolites under MW. Selectively heated Cs+ cations in FAU zeolite exhibited selective CH4 combustion performance, that is, COx generation at the heated Cs+ cations selectively occurred while side reactions in the low-temperature gas phase were suppressed. The Cs-O pair distribution function revealed by synchrotron-based in situ x-ray total scattering gave us direct evidence of peculiar displacement induced by MW, which was consistent with the results of molecular dynamics simulation mimicking MW heating. The concept of selective monoatomic heating by MW is expected to open a next stage in "microwave catalysis" science by providing physicochemical insights into "microwave effects."

Photothermia at the nanoscale induces ferroptosis via nanoparticle degradation

The Fe(II)-induced ferroptotic cell death pathway is an asset in cancer therapy, yet it calls into question the biocompatibility of magnetic nanoparticles. In the latter, Fe(II) is sequestered within the crystal structure and is released only upon nanoparticle degradation, a transition that is not well understood. Here, we dissect the chemical environment necessary for nanoparticle degradation and subsequent Fe(II) release. Importantly, temperature acts as an accelerator of the process and can be triggered remotely by laser-mediated photothermal conversion, as evidenced by the loss of the nanoparticles' magnetic fingerprint. Remarkably, the local hot-spot temperature generated at the nanoscale can be measured in operando, in the vicinity of each nanoparticle, by comparing the photothermal-induced nanoparticle degradation patterns with those of global heating. Further, remote photothermal irradiation accelerates degradation inside cancer cells in a tumor spheroid model, with efficiency correlating with the endocytosis progression state of the nanoparticles. High-throughput imaging quantification of Fe2+ release, ROS generation, lipid peroxidation and cell death at the spheroid level confirm the synergistic thermo-ferroptotic therapy due to the photothermal degradation at the nanoparticle level.

Developing a microwave-driven reactor for ammonia synthesis: insights into the unique challenges of microwave catalysis

Reactor requirements grow with scale as new phenomena can become more and more relevant, creating trends that we've observed in the development of microwave-driven ammonia synthesis – a technique with a unique combination of high output and energy efficiency.

Enhanced activity of catalysts on substrates with surface protonic current in an electrical field - a review

It has over the last few years been reported that the application of a DC electric field and resulting current over a bed of certain catalyst-support systems enhances catalytic activity for several reactions involving hydrogen-containing reactants, and the effect has been attributed to surface protonic conductivity on the porous ceramic support (typically ZrO2, CeO2, SrZrO3). Models for the nature of the interaction between the protonic current, the catalyst particle (typically Ru, Ni, Co, Fe), and adsorbed reactants such as NH3 and CH4 have developed as experimental evidence has emerged. Here, we summarize the electrical enhancement and how it enhances yield and lowers reaction temperatures of industrially important chemical processes. We also review the nature of the relevant catalysts, support materials, as well as essentials and recent progress in surface protonics. It is easily suspected that the effect is merely an increase in local vs. nominal set temperature due to the ohmic heating of the electrical field and current. We address this and add data from recent studies of ours that indicate that the heating effect is minor, and that the novel catalytic effect of a surface protonic current must have additional causes.

Decrease in the Crystallite Diameter of Solid Crystalline Magnetite around the Curie Temperature by Microwave Magnetic Fields Irradiation

A decrease in the crystallite diameter of ferrites irradiated with microwaves has been considered as a non-thermal effect of so-called de-crystallization; however, its mechanism has not been elucidated. We hypothesized that a decrease in the crystallite diameter is caused by interaction between the ordered spins of ferrite and the magnetic field of microwaves. To verify this, we focused on magnetite with a Curie temperature of 585 °C. Temperature dependence around this temperature and time dependence of the crystallite diameter of the magnetite irradiated with microwaves at different temperatures and durations were investigated. From the X-ray diffraction data, the crystallite diameter of magnetite exhibited a minimum value at 500 °C, just below the Curie temperature of magnetite, where the energy loss of the interaction between magnetite's spins and the microwaves takes the maximum value. The crystallite diameter exhibited a minimum value at 5 min irradiation time, during which the microwaves were excessively absorbed. Transmission electron microscopy observations showed that the microstructure of irradiated magnetite in this study was different from that reported previously, indicating that a decrease in the crystallite diameter is not caused by de-crystallization but its similar phenomenon. A decrease in coercivity and lowering temperature of Verwey transition were observed, evidencing decreased crystallite diameter. This study can thus contribute to the development of the theory of a non-thermal effect.