Scanning probe microscopy

Standardization of Chemically Selective Atomic Force Microscopy for Metal Oxide Surfaces

The structures of metal oxide surfaces and inherent defects are vital for a variety of applications in materials science and chemistry. While scanning probe microscopy can reveal atomic-scale details, elemental discrimination usually requires indirect assumptions and extensive theoretical modeling. Here, atomic force microscopy with O-terminated copper tips on a variety of sample systems demonstrates not only a clear and universal chemical contrast but also immediate access to the atomic configuration of defects. The chemically selective contrast is explained by purely electrostatic interactions between the negatively charged tip-apex and the strongly varying electrostatic potential of metal and oxygen sites. These results offer a standardized methodology for the direct characterization of even the most complex metal oxide surfaces, providing fundamental insight into atomic-scale processes in these material systems.

Single-Molecule Identification of the Isomers of a Lipidic Antibody Activator

Molecular structural elucidation can be accomplished by different techniques, such as nuclear magnetic resonance or X-ray diffraction. However, the former does not give information about the three-dimensional atomic arrangement, and the latter needs crystallizable solid samples. An alternative is direct, real-space visualization of the molecules by cryogenic scanning tunneling microscopy (STM). This technique is usually limited to thermally robust molecules because an annealing step is required for sample deposition. A landmark development has been the coupling of STM with electrospray deposition (ESD), which smooths the process and widens the scope of the visualization technique. In this work, we present the on-surface characterization of air-, light-, and temperature-sensitive rhamnopolyene with relevance in molecular biology. Supported by theoretical calculations, we characterize two isomers of this flexible molecule, confirming the potential of the technique to inspect labile, non-crystallizable compounds.

How scanning probe microscopy can be supported by artificial intelligence and quantum computing?

The impact of Artificial Intelligence (AI) is rapidly expanding, revolutionizing both science and society. It is applied to practically all areas of life, science, and technology, including materials science, which continuously requires novel tools for effective materials characterization. One of the widely used techniques is scanning probe microscopy (SPM). SPM has fundamentally changed materials engineering, biology, and chemistry by providing tools for atomic-precision surface mapping. Despite its many advantages, it also has some drawbacks, such as long scanning times or the possibility of damaging soft-surface materials. In this paper, we focus on the potential for supporting SPM-based measurements, with an emphasis on the application of AI-based algorithms, especially Machine Learning-based algorithms, as well as quantum computing (QC). It has been found that AI can be helpful in automating experimental processes in routine operations, algorithmically searching for optimal sample regions, and elucidating structure-property relationships. Thus, it contributes to increasing the efficiency and accuracy of optical nanoscopy scanning probes. Moreover, the combination of AI-based algorithms and QC may have enormous potential to enhance the practical application of SPM. The limitations of the AI-QC-based approach were also discussed. Finally, we outline a research path for improving AI-QC-powered SPM. RESEARCH HIGHLIGHTS: Artificial intelligence and quantum computing as support for scanning probe microscopy. The analysis indicates a research gap in the field of scanning probe microscopy. The research aims to shed light into ai-qc-powered scanning probe microscopy.

Revealing the Influence of Molecular Chemisorption Direction on the Reaction Selectivity of Dehalogenative Coupling on Au(111): Polymerization versus Cyclization

The control of reaction selectivity is of great interest in chemistry and depends crucially on the revelation of key influencing factors. Based on well-defined molecule-substrate model systems, various influencing factors have been elucidated, focusing primarily on the molecular precursors and the underlying substrates themselves, while interfacial properties have recently been shown to be essential as well. However, the influence of molecular chemisorption direction on reaction selectivity, as a subtle interplay between molecules and underlying substrates, remains elusive. In this work, by a combination of scanning tunneling microscopy imaging and density functional theory calculations, we report the influence of molecular chemisorption direction on the reaction selectivity of two types of dehalogenative coupling on Au(111), i.e., polymerization and cyclization, at the atomic level. The diffusion step of a reactive dehalogenated intermediate in two different chemisorption directions was theoretically revealed to be the key to determining the corresponding reaction selectivity. Our results highlight the important role of molecular chemisorption directions in regulating the on-surface dehalogenative coupling reaction pathways and products, which provides fundamental insights into the control of reaction selectivity by exploiting some subtle interfacial parameters in on-surface reactions for the fabrication of target low-dimensional carbon nanostructures.

Scanning Probe Microscopies for Characterizations of 2D Materials

2D materials are intriguing due to their remarkably thin and flat structure. This unique configuration allows the majority of their constituent atoms to be accessible on the surface, facilitating easier electron tunneling while generating weak surface forces. To decipher the subtle signals inherent in these materials, the application of techniques that offer atomic resolution (horizontal) and sub-Angstrom (z-height vertical) sensitivity is crucial. Scanning probe microscopy (SPM) emerges as the quintessential tool in this regard, owing to its atomic-level spatial precision, ability to detect unitary charges, responsiveness to pico-newton-scale forces, and capability to discern pico-ampere currents. Furthermore, the versatility of SPM to operate under varying environmental conditions, such as different temperatures and in the presence of various gases or liquids, opens up the possibility of studying the stability and reactivity of 2D materials in situ. The characteristic flatness, surface accessibility, ultra-thinness, and weak signal strengths of 2D materials align perfectly with the capabilities of SPM technologies, enabling researchers to uncover the nuanced behaviors and properties of these advanced materials at the nanoscale and even the atomic scale.

Expanding the Horizons of Machine Learning in Nanomaterials to Chiral Nanostructures

Machine learning holds significant research potential in the field of nanotechnology, enabling nanomaterial structure and property predictions, facilitating materials design and discovery, and reducing the need for time-consuming and labor-intensive experiments and simulations. In contrast to their achiral counterparts, the application of machine learning for chiral nanomaterials is still in its infancy, with a limited number of publications to date. This is despite the great potential of machine learning to advance the development of new sustainable chiral materials with high values of optical activity, circularly polarized luminescence, and enantioselectivity, as well as for the analysis of structural chirality by electron microscopy. In this review, an analysis of machine learning methods used for studying achiral nanomaterials is provided, subsequently offering guidance on adapting and extending this work to chiral nanomaterials. An overview of chiral nanomaterials within the framework of synthesis-structure-property-application relationships is presented and insights on how to leverage machine learning for the study of these highly complex relationships are provided. Some key recent publications are reviewed and discussed on the application of machine learning for chiral nanomaterials. Finally, the review captures the key achievements, ongoing challenges, and the prospective outlook for this very important research field.

A scanning probe microscope compatible with quantum sensing at ambient conditions

We designed and built up a new type of ambient scanning probe microscope (SPM), which is fully compatible with state-of-the-art quantum sensing technology based on the nitrogen-vacancy (NV) centers in diamond. We chose a qPlus-type tuning fork (Q up to ∼4400) as the current/force sensor of SPM for its high stiffness and stability under various environments, which yields atomic resolution under scanning tunneling microscopy mode and 1.2-nm resolution under atomic force microscopy mode. The tip of SPM can be used to directly image the topography of nanoscale targets on diamond surfaces for quantum sensing and to manipulate the electrostatic environment of NV centers to enhance their sensitivity up to a single proton spin. In addition, we also demonstrated scanning magnetometry and electrometry with a spatial resolution of ∼20 nm. Our new system not only paves the way for integrating atomic/molecular-scale color-center qubits onto SPM tips to produce quantum tips but also provides the possibility of fabricating color-center qubits with nanoscale or atomic precision.

Analysis on high-resolution spectrum of the S1-S0 transition of free-base phthalocyanine

A high-resolution absorption spectrum of the S1-S0 transition of free-base phthalocyanine was observed and analyzed with improved reliability. The spectrum, with a partially resolved rotational structure, was obtained by using the buffer-gas cooling technique and a single-mode tunable laser. Our new analysis reveals that the S1←S0000 band belongs to the a-type transition, where the electronic transition moment aligns parallel to the NH-HN direction, allowing the assignment of the S1 state to 1B3u. These results agree with a prior study using supersonic expansion and are well supported by theoretical calculations. Interestingly, the rotational constant B in the S1 state, which is often smaller than that in the ground state for typical molecules, was found to be slightly larger than that in the S01Ag state. This suggests a change in the character of π bonds with the electronic excitation.

Probe chip nanofabrication enabled reverse tip sample scanning probe microscopy concept and measurements

We introduce a new scanning probe microscopy (SPM) concept called reverse tip sample scanning probe microscopy (RTS SPM), where the tip and sample positions are reversed as compared to traditional SPM. The main benefit of RTS SPM over the standard SPM configuration is that it allows for simple and fast tip changes. This overcomes two major limitations of SPM which are slow data acquisition and a strong dependency of the data on the tip condition. A probe chip with thousands of sharp integrated tips is the basis of our concept. We have developed a nanofabrication protocol for Si based probe chips and their functionalization with metal and diamond coatings, evaluated our probe chips for various RTS SPM applications (multi-tip imaging, SPM tomography, and correlative SPM), and showed the high potential of the RTS SPM concept.

Charge density waves in two-dimensional transition metal dichalcogenides

Charge density wave (CDW is one of the most ubiquitous electronic orders in quantum materials. While the essential ingredients of CDW order have been extensively studied, a comprehensive microscopic understanding is yet to be reached. Recent research efforts on the CDW phenomena in two-dimensional (2D) materials provide a new pathway toward a deeper understanding of its complexity. This review provides an overview of the CDW orders in 2D with atomically thin transition metal dichalcogenides (TMDCs) as the materials platform. We mainly focus on the electronic structure investigations on the epitaxially grown TMDC samples with angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy as complementary experimental tools. We discuss the possible origins of the 2D CDW, novel quantum states coexisting with them, and exotic types of charge orders that can only be realized in the 2D limit.

On-surface synthesis of two types of cyano-substituted polyfluorene derivatives via Ullmann coupling on Au(111)

Using 4-(3,6-dibromo-9H-carbazol-9-yl)benzonitrile (DBCB) precursors, we successfully constructed two types of cyano-substituted polymers on Au(111) by the molecular beam epitaxy method. According to the geometry, the two polymers are referred to as w-type polymers composed of cis-dimers and z-type polymers composed of trans-dimers. The intermediate dimers and final polymers were well characterized by high-resolution scanning tunneling microscopy (HR-STM). Moreover, the productivities of these two polymers can be controlled by adjusting the heating rate and different treatment methods. High heating rates and hot deposition can provide more ample space and time for molecular diffusion, which is conducive to the formation of w-type polymers with relatively low density. In addition, by combining scanning tunneling spectroscopy (STS) and density functional theory (DFT) calculations, we have shown that the addition of CN groups reduces the band gap of the two polymers. Our investigation thus shows the controllable construction of nanostructures through efficient surface synthesis parameters and reveals the potential of using functional groups as tools to modify the electronic properties of polymers.

Label-Free Optical Imaging of Nanoscale Single Entities

The advancement of optical microscopy technologies has achieved imaging of nanoscale objects, including nanomaterials, virions, organelles, and biological molecules, at the single entity level. Recently developed plasmonic and scattering based optical microscopy technologies have enabled label-free imaging of single entities with high spatial and temporal resolutions. These label-free methods eliminate the complexity of sample labeling and minimize the perturbation of the analyte native state. Additionally, these imaging-based methods can noninvasively probe the dynamics and functions of single entities with sufficient throughput for heterogeneity analysis. This perspective will review label-free single entity imaging technologies and discuss their principles, applications, and key challenges.

Automated Generation and Analysis of Molecular Images Using Generative Artificial Intelligence Models

The development of scanning probe microscopy (SPM) has enabled unprecedented scientific discoveries through high-resolution imaging. Simulations and theoretical analysis of SPM images are equally important as obtaining experimental images since their comparisons provide fruitful understandings of the structures and physical properties of the investigated systems. So far, SPM image simulations are conventionally based on quantum mechanical theories, which can take several days in tasks of large-scale systems. Here, we have developed a scanning tunneling microscopy (STM) molecular image simulation and analysis framework based on a generative adversarial model, CycleGAN. It allows efficient translations between STM data and molecular models. Our CycleGAN-based framework introduces an approach for high-fidelity STM image simulation, outperforming traditional quantum mechanical methods in efficiency and accuracy. We envision that the integration of generative networks and high-resolution molecular imaging opens avenues in materials discovery relying on SPM technologies.

Accelerated Nano-Optical Imaging through Sparse Sampling

The integration time and signal-to-noise ratio are inextricably linked when performing scanning probe microscopy based on raster scanning. This often yields a large lower bound on the measurement time, for example, in nano-optical imaging experiments performed using a scanning near-field optical microscope (SNOM). Here, we utilize sparse scanning augmented with Gaussian process regression to bypass the time constraint. We apply this approach to image charge-transfer polaritons in graphene residing on ruthenium trichloride (α-RuCl3) and obtain key features such as polariton damping and dispersion. Critically, nano-optical SNOM imaging data obtained via sparse sampling are in good agreement with those extracted from traditional raster scans but require 11 times fewer sampled points. As a result, Gaussian process-aided sparse spiral scans offer a major decrease in scanning time.

Atomic Force Microscopy Applied to the Study of Tauopathies

Atomic force microscopy (AFM) is a scanning probe microscopy technique which has a physical principle, the measurement of interatomic forces between a very thin tip and the surface of a sample, allowing the obtaining of quantitative data at the nanoscale, contributing to the surface study and mechanical characterization. Due to its great versatility, AFM has been used to investigate the structural and nanomechanical properties of several inorganic and biological materials, including neurons affected by tauopathies. Tauopathies are neurodegenerative diseases featured by aggregation of phosphorylated tau protein inside neurons, leading to functional loss and progressive neurotoxicity. In the broad universe of neurodegenerative diseases, tauopathies comprise the most prevalent, with Alzheimer's disease as its main representative. This review highlights the use of AFM as a suitable research technique for the study of cellular damages in tauopathies, even in early stages, allowing elucidation of pathogenic mechanisms of these diseases.

Modulation of Carbon Nanotube Electronic Structure by Grain Boundary Defects in RbI on Au(111)

The electronic properties of single-walled carbon nanotubes (SWCNTs) are known to be highly sensitive to environmental effects. Here, we use scanning tunneling microscopy and spectroscopy to investigate the electronic properties of SWCNTs deposited on RbI monolayer films grown on Au(111). We find that grain boundary defects in RbI monolayers cause the appearance of spatially confined localized states in the SWCNTs. Our density functional theory calculations show that grain boundary defects in RbI/Au(111) produce a stabilizing electrostatic potential caused by reduced coordination of iodine atoms at the RbI grain boundary. The presented results may offer insights into the performance of devices involving transport through SWCNTs subjected to external electrostatic disorder.

Haptic sensation-based scanning probe microscopy: Exploring perceived forces for optimal intuition-driven control

We demonstrate a cryogenic scanning probe microscope (SPM) that has been modified to be controlled with a haptic device, such that the operator can 'feel' the surface of a sample under investigation. This system allows for direct tactile sensation of the atoms in and on top of a crystal, and allows the operator to perceive, by using different SPM modalities, sensations that are representative of the relevant atomic forces and tunneling processes controlling the SPM. In particular, we operate the microscope in modes of (1) conventional STM feedback, (2) energy-dependent electron density imaging, (3) q-plus AFM frequency shift based force sensing, and (4) atomic manipulation/sliding. We also use software to modify the haptic feedback sensation to mimic different interatomic forces, including covalent bonding, Coulomb repulsion, Van der Waals repulsion and a full Lennard-Jones potential. This manner of SPM control creates new opportunities for human-based intuition scanning, and also acts as a novel educational tool to aid in understanding materials at an atomic level.

Molecular sensitised probe for amino acid recognition within peptide sequences

The combination of low-temperature scanning tunnelling microscopy with a mass-selective electro-spray ion-beam deposition established the investigation of large biomolecules at nanometer and sub-nanometer scale. Due to complex architecture and conformational freedom, however, the chemical identification of building blocks of these biopolymers often relies on the presence of markers, extensive simulations, or is not possible at all. Here, we present a molecular probe-sensitisation approach addressing the identification of a specific amino acid within different peptides. A selective intermolecular interaction between the sensitiser attached at the tip-apex and the target amino acid on the surface induces an enhanced tunnelling conductance of one specific spectral feature, which can be mapped in spectroscopic imaging. Density functional theory calculations suggest a mechanism that relies on conformational changes of the sensitiser that are accompanied by local charge redistributions in the tunnelling junction, which, in turn, lower the tunnelling barrier at that specific part of the peptide.

The emergence of super-resolution beyond the probe size in scanning 3DXRD microscopy

The spatial resolution in scanning-based two-dimensional microscopy is normally limited by the size of the probe, thereby a smaller probe is a prerequisite for enhancing the spatial resolution. For three-dimensional microscopy that combines translation and rotation motions of a specimen, however, complex trajectories of the probe highly overlap in the specimen, which could change the postulate above. Here, the spatial resolution achieved in scanning three-dimensional X-ray diffraction (s3DXRD) microscopy is investigated. In this method, the most appropriate orientation of the pixel in the specimen coordinate is selected by comparing the completeness of diffraction peaks with theory. Therefore, the superposed area of the beam trajectory has a strong effect on the spatial resolution, in terms of the completeness of diffraction peaks. It was found that the highly superposed area by the incident X-rays, which has the highest completeness factor in the pixel of the specimen, is much smaller than the X-ray probe size, and that sub-pixel analysis by dividing a pixel into small pieces leads to drastic improvement of the spatial resolution in s3DXRD.

Direct Visualization of CO Interaction on Oxygen Poisoned Co(0001)

The poisoning of catalysts has always been a vital issue in catalytic reactions. In this study, direct observation of the interaction of CO and oxygen-poisoned Co(0001) has been achieved with scanning tunneling microscopy (STM), temperature-programmed desorption (TPD), and density functional theory calculation. A two-stage adsorption process of CO on a well-prepared p(2×2)-O layer covered Co(0001) was directly visualized. With increasing annealing time at a certain temperature after the CO dosage, the ordered (2 × 2) pattern formed in the first stage can be recovered, suggesting the weak interaction of CO with the O-covered Co(0001) surface in the latter stage. Compared to the clean Co(0001) surface, on an oxygen-poisoned surface, no further reaction was observed, illustrating the poisoning of the catalyst. Moreover, TPD results are in good agreement with the STM observation; a desorption energy of 0.35 eV is evaluated with a simple but accurate scheme.

Thermal near-field scattering characteristics for dielectric materials

In this study, we passively analyzed the near-field characteristics of thermally excited evanescent waves, which are radiation waves generated by the local dynamics of materials, including electron motions and lattice vibrations. The thermally excited evanescent waves on aluminium nitride (AlN) and gallium nitride (GaN) were measured using passive spectroscopic scattering-type scanning near-field optical microscopy (s-SNOM) in the wavelength ranges of 10.5-12.2 μm and 14.0-15.0 μm, which include the surface phonon-polariton (SPhP) wavelength of the studied dielectrics. We determined the unique decay characteristics of AlN and GaN, indicating a ten-fold increase in the probe area contributing to the scattering of waves near the SPhP wavelength compared to that in other wavelength ranges. The extended probe area correlated with the polariton decay lengths, indicating that the non-enhanced polaritons around K ~ ω/c were dominant in the scattered waves near the SPhP wavelength. In addition to the conventional passive detection mechanisms for metals, the proposed detection scheme will be a versatile passive detection model in the near future.

Direct observation of glycans bonded to proteins and lipids at the single-molecule level

Proteins and lipids decorated with glycans are found throughout biological entities, playing roles in biological functions and dysfunctions. Current analytical strategies for these glycan-decorated biomolecules, termed glycoconjugates, rely on ensemble-averaged methods that do not provide a full view of positions and structures of glycans attached at individual sites in a given molecule, especially for glycoproteins. We show single-molecule analysis of glycoconjugates by direct imaging of individual glycoconjugate molecules using low-temperature scanning tunneling microscopy. Intact glycoconjugate ions from electrospray are soft-landed on a surface for their direct single-molecule imaging. The submolecular imaging resolution corroborated by quantum mechanical modeling unveils whole structures and attachment sites of glycans in glycopeptides, glycolipids, N-glycoproteins, and O-glycoproteins densely decorated with glycans.

Dynamic Friction Unraveled by Observing an Unexpected Intermediate State in Controlled Molecular Manipulation

The pervasive phenomenon of friction has been studied at the nanoscale via a controlled manipulation of single atoms and molecules with a metallic tip, which enabled a precise determination of the static friction force necessary to initiate motion. However, little is known about the atomic dynamics during manipulation. Here, we reveal the complete manipulation process of a CO molecule on a Cu(110) surface at low temperatures using a combination of noncontact atomic force microscopy and density functional theory simulations. We found that an intermediate state, inaccessible for the far-tip position, is enabled in the reaction pathway for the close-tip position, which is crucial to understanding the manipulation process, including dynamic friction. Our results show how friction forces can be controlled and optimized, facilitating new fundamental insights for tribology.

Predicting Molecular Self-Assembly on Metal Surfaces Using Graph Neural Networks Based on Experimental Data Sets

The application of supramolecular chemistry on solid surfaces has received extensive attention in the past few decades. To date, combining experiments with quantum mechanical or molecular dynamic methods represents the key strategy to explore the molecular self-assembled structures, which is, however, often laborious. Recently, machine learning (ML) has become one of the most exciting tools in material research, allowing for both efficiency and accuracy in predicting molecular properties. In this work, we constructed a graph neural network to predict the self-assembly of functional polycyclic aromatic hydrocarbons (PAHs) on metal surfaces. Using scanning tunneling microscopy (STM), we characterized the self-assembled nanostructures of a homologous series of PAH molecules on different metal surfaces to construct an experimental data set for model training. Compared with traditional ML algorithms, our model exhibits better predictive performance. Finally, the generalization of the model is further verified by comparing the ML predictions and experimental results of different functionalized molecule. Our results demonstrate training experimental data sets to produce a predictive ML model of molecular self-assembly with generalization performance, which allows for the predictive design of nanostructures with functional molecules.

Accurate Simulations of Scanning Tunneling Microscope: Both Tip and Substrate States Matter

Scanning tunneling microscope (STM) provides an atomic-scale characterization tool. To this end, high-resolution measurements and accurate simulations must closely cooperate. Emerging experimental techniques, e.g., substrate spacers and tip modifications, suppress metallic couplings and improve the resolution. On the other hand, development of STM simulation methods was inactive in the past decade. Conventional simulations focus on the electronic structure of the substrate, often overlooking detailed descriptions of the tip states. Meanwhile, the overwhelming usage of periodic boundary conditions ensures effective simulations of only neutral systems. In this Perspective, we highlight the recent progress that takes the effects of both tip and substrate into account under either Tersoff-Hamann or Bardeen's approximation, which provides an accurate analysis of measured high-resolution STM results, uncovers underlying concepts, and rationally designs experimental protocols for important chemical systems. We hope this Perspective will stimulate broad interest in advanced STM simulations, highlighting the way forward for STM investigations that involve complex geometrical and electronic structures.

Single-Molecule Junction Formation in Deep Eutectic Solvents with Highly Effective Gate Coupling

The environment surrounding a molecular junction affects its charge-transport properties and, therefore, must be chosen with care. In the case of measurements in liquid media, the solvent must provide good solvation, grant junction stability, and, in the case of electrolyte gating experiments, allow efficient electrical coupling to the gate electrodes through control of the electrical double layer. We evaluated in this study the deep eutectic solvent mixture (DES) ethaline, which is a mixture of choline chloride and ethylene glycol (1:2), for single-molecule junction fabrication with break-junction techniques. In ethaline, we were able to (i) measure challenging and poorly soluble molecular wires, exploiting the improved solvation capabilities offered by DESs, and (ii) efficiently apply an electrostatic gate able to modulate the conductance of the junction by approximately an order of magnitude within a ∼1 V potential window. The electrochemical gating results on a Au-VDP-Au junction follow exceptionally well the single-level modeling with strong gate coupling (where VDP is 1,2-di(pyridine-4-yl)ethene). Ethaline is also an ideal solvent for the measurement of very short molecular junctions, as it grants a greatly reduced snapback distance of the metallic electrodes upon point-contact rupture. Our work demonstrates that DESs are viable alternatives to often relatively expensive ionic liquids, offering good versatility for single-molecule electrical measurements.

A Brief Review of In Situ and Operando Electrochemical Analysis of Bacteria by Scanning Probes

Bacteria are similar to social organisms that engage in critical interactions with one another, forming spatially structured communities. Despite extensive research on the composition, structure, and communication of bacteria, the mechanisms behind their interactions and biofilm formation are not yet fully understood. To address this issue, scanning probe techniques such as atomic force microscopy (AFM), scanning electrochemical microscopy (SECM), scanning electrochemical cell microscopy (SECCM), and scanning ion-conductance microscopy (SICM) have been utilized to analyze bacteria. This review article focuses on summarizing the use of electrochemical scanning probes for investigating bacteria, including analysis of electroactive metabolites, enzymes, oxygen consumption, ion concentrations, pH values, biofilms, and quorum sensing molecules to provide a better understanding of bacterial interactions and communication. SECM has been combined with other techniques, such as AFM, inverted optical microscopy, SICM, and fluorescence microscopy. This allows a comprehensive study of the surfaces of bacteria while also providing more information on their metabolic activity. In general, the use of scanning probes for the detection of bacteria has shown great promise and has the potential to provide a powerful tool for the study of bacterial physiology and the detection of bacterial infections.

Cross-sectional Kelvin probe force microscopy on III-V epitaxial multilayer stacks: challenges and perspectives

Multilayer III-V-based solar cells are complex devices consisting of many layers and interfaces. The study and the comprehension of the mechanisms that take place at the interfaces is crucial for efficiency improvement. In this work, we apply frequency-modulated Kelvin probe force microscopy under ambient conditions to investigate the capability of this technique for the analysis of an InP/GaInAs(P) multilayer stack. KPFM reveals a strong dependence on the local doping concentration, allowing for the detection of the surface potential of layers with a resolution as low as 20 nm. The analysis of the surface potential allowed for the identification of space charge regions and, thus, the presence of several junctions along the stack. Furthermore, a contrast enhancement in the surface potential image was observed when KPFM was performed under illumination, which is analysed in terms of the reduction of surface band bending induced by surface defects by photogenerated carrier distributions. The analysis of the KPFM data was assisted by means of theoretical modelling simulating the energy bands profile and KPFM measurements.

Modeling and calibration of micro/nano FBG temperature probe for scanning probe microscopy

To accurately measure the local temperatures of the micro-nano area, we propose an optical method using a tapered fiber Bragg grating (FBG) probe with a nano tip for scanning probe microscopy (SPM). When the tapered FBG probe senses local temperature through near-field heat transfer, the intensity of the reflected spectrum decreases, along with a broadening bandwidth and a shift in the central peak position. Modeling the heat transfer between the probe and the sample shows that the tapered FBG probe is in a non-uniform temperature field when approaching the sample surface. Simulation of the probe's reflection spectrum reveals that the central peak position shifts nonlinearly with increasing local temperature. In addition, the near-field temperature calibration experiments show that the temperature sensitivity of the FBG probe increases nonlinearly from 6.2 pm/°C to 9.4 pm/°C as the sample surface temperature increases from 25.3°C to 160.4°C. The agreement of the experimental results with the theory and the reproducibility demonstrate that this method offers a promising approach for exploring micro-nano temperature.

Molecular Electronics: Creating and Bridging Molecular Junctions and Promoting Its Commercialization

Molecular electronics is driven by the dream of expanding Moore's law to the molecular level for next-generation electronics through incorporating individual or ensemble molecules into electronic circuits. For nearly 50 years, numerous efforts have been made to explore the intrinsic properties of molecules and develop diverse fascinating molecular electronic devices with the desired functionalities. The flourishing of molecular electronics is inseparable from the development of various elegant methodologies for creating nanogap electrodes and bridging the nanogap with molecules. This review first focuses on the techniques for making lateral and vertical nanogap electrodes by breaking, narrowing, and fixed modes, and highlights their capabilities, applications, merits, and shortcomings. After summarizing the approaches of growing single molecules or molecular layers on the electrodes, the methods of constructing a complete molecular circuit are comprehensively grouped into three categories: 1) directly bridging one-molecule-electrode component with another electrode, 2) physically bridging two-molecule-electrode components, and 3) chemically bridging two-molecule-electrode components. Finally, the current state of molecular circuit integration and commercialization is discussed and perspectives are provided, hoping to encourage the community to accelerate the realization of fully scalable molecular electronics for a new era of integrated microsystems and applications.

A Paradigm Shift from 2D to 3D: Surface Supramolecular Assemblies and Their Electronic Properties Explored by Scanning Tunneling Microscopy and Spectroscopy

Exploring supramolecular architectures at surfaces plays an increasingly important role in contemporary science, especially for molecular electronics. A paradigm of research interest in this context is shifting from 2D to 3D that is expanding from monolayer, bilayers, to multilayers. Taking advantage of its high-resolution insight into monolayers and a few layers, scanning tunneling microscopy/spectroscopy (STM/STS) turns out a powerful tool for analyzing such thin films on a solid surface. This review summarizes the representative efforts of STM/STS studies of layered supramolecular assemblies and their unique electronic properties, especially at the liquid-solid interface. The superiority of the 3D molecular networks at surfaces is elucidated and an outlook on the challenges that still lie ahead is provided. This review not only highlights the profound progress in 3D supramolecular assemblies but also provides researchers with unusual concepts to design surface supramolecular structures with increasing complexity and desired functionality.

Electrochemical properties of humic acid and its novel applications: A tip of the iceberg

The widely existed humic acid (HA) with abundant redox-active groups has been considered to play an important role in biogeochemistry in sediments and soils. Recent studies reported that HA showed great performance in terms of electron transfer capacity (up to HA_EDC = 94 mmol e^-/mol C, HA_EAC = 42 mmol e^-/mol C). Since HA is widely available, inexpensive and environmentally friendly, the electrochemistry of HA has been explored to apply in many fields, such as environmental remediation, detection sensor and energy storage. Whereas, these prospective applications of HA and their electrochemical principles were lack of a comprehensive summary. In this review, the electrochemical properties and the prospective electrochemical applications of HA were summarized. Simultaneously, the existing problems like shortages of traditional electrochemical characterization of HA, and future research directions about HA electrochemistry were prospected. This review provides a deeper understanding of HA electrochemistry, and also inspires ideas for environmental remediation, detection sensor and energy storage by exploring the potential application values of HA.

A spectroscopic-imaging scanning tunneling microscope in vector magnetic field

Cryogenic scanning tunneling microscopy and spectroscopy (STM/STS) performed in a high vector magnetic field provide unique possibilities for imaging surface magnetic structures and anisotropic superconductivity and exploring spin physics in quantum materials with atomic precision. Here, we describe the design, construction, and performance of a low-temperature, ultra-high-vacuum (UHV) spectroscopic-imaging STM equipped with a vector magnet capable of applying a field of up to 3 T in any direction with respect to the sample surface. The STM head is housed in a fully bakeable UHV compatible cryogenic insert and is operational over variable temperatures ranging from ∼300 down to 1.5 K. The insert can be easily upgraded using our home-designed ³He refrigerator. In addition to layered compounds, which can be cleaved at a temperature of either ∼300, ∼77, or ∼4.2 K to expose an atomically flat surface, thin films can also be studied by directly transferring using a UHV suitcase from our oxide thin-film laboratory. Samples can be treated further with a heater and a liquid helium/nitrogen cooling stage on a three-axis manipulator. The STM tips can be treated in vacuo by e-beam bombardment and ion sputtering. We demonstrate the successful operation of the STM with varying the magnetic field direction. Our facility provides a way to study materials in which magnetic anisotropy is a key factor in determining the electronic properties such as in topological semimetals and superconductors.

Landing Proteins on Graphene Trampoline Preserves Their Gas-Phase Folding on the Surface

Molecule-surface collisions are known to initiate dynamics that lead to products inaccessible by thermal chemistry. These collision dynamics, however, have mostly been examined on bulk surfaces, leaving vast opportunities unexplored for molecular collisions on nanostructures, especially on those that exhibit mechanical properties radically different from those of their bulk counterparts. Probing energy-dependent dynamics on nanostructures, particularly for large molecules, has been challenging due to their fast time scales and high structural complexity. Here, by examining the dynamics of a protein impinging on a freestanding, single-atom-thick membrane, we discover molecule-on-trampoline dynamics that disperse the collision impact away from the incident protein within a few picoseconds. As a result, our experiments and ab initio calculations show that cytochrome c retains its gas-phase folded structure when it collides onto freestanding single-layer graphene at low energies (∼20 meV/atom). The molecule-on-trampoline dynamics, expected to be operative on many freestanding atomic membranes, enable reliable means to transfer gas-phase macromolecular structures onto freestanding surfaces for their single-molecule imaging, complementing many bioanalytical techniques.

Langmuir and Langmuir-Blodgett Films of Gold and Silver Nanoparticles

Recently the focus of the Langmuir-Blodgett technique as a method of choice to transfer monolayers from the air/water interface onto solid substrates in a controllable fashion has been shifting toward purely hydrophobic gold and silver nanoparticles. The fundamental interactions between particles that become relevant in the absence of polar groups range from dispersive attractions from the metal cores and repulsions between ligand shells to weaker entropic factors. The layer evolution is explored, starting with interfacial self-assembly upon solution spreading and domain and circular island formation, which subsequently merge into a complete monolayer and finally form multilayers or macroscopic wrinkles. Moreover, structural properties such as the core:ligand size ratio are investigated in the context of dispersive forces, whereby the nanoparticles with small cores and long ligands tend not to aggregate sufficiently to produce continuous films, those with large cores and short ligands were found to aggregate irreversibly, and those in between the two extremes were concluded to be able to form highly organized crystalline films. Similarly, the characteristics of the spreading solution such as the concentration and the solvent type crucially influence the film crystallinity, with the deciding factor being the degree of affinity between the capping ligand and the solvent used for spreading. Finally, the most common strategies employed to enhance the mechanical stability of the metal nanoparticle films along with the recent attempts to functionalize the particles in attempts to improve their applicability in the industry are summarized and evaluated in relation to their future prospects. One of the objectives of this feature article is to elucidate the differences between hydrophobic metal nanoparticles and typical amphiphilic molecules that the majority of the literature in the field describes and to familiarize the reader with the knowledge required to design Langmuir-Blodgett nanoparticle systems as well as the strategies to improve existing ones.

The quantum twisting microscope

The invention of scanning probe microscopy revolutionized the way electronic phenomena are visualized¹. Whereas present-day probes can access a variety of electronic properties at a single location in space², a scanning microscope that can directly probe the quantum mechanical existence of an electron at several locations would provide direct access to key quantum properties of electronic systems, so far unreachable. Here, we demonstrate a conceptually new type of scanning probe microscope-the quantum twisting microscope (QTM)-capable of performing local interference experiments at its tip. The QTM is based on a unique van der Waals tip, allowing the creation of pristine two-dimensional junctions, which provide a multitude of coherently interfering paths for an electron to tunnel into a sample. With the addition of a continuously scanned twist angle between the tip and sample, this microscope probes electrons along a line in momentum space similar to how a scanning tunnelling microscope probes electrons along a line in real space. Through a series of experiments, we demonstrate room-temperature quantum coherence at the tip, study the twist angle evolution of twisted bilayer graphene, directly image the energy bands of monolayer and twisted bilayer graphene and, finally, apply large local pressures while visualizing the gradual flattening of the low-energy band of twisted bilayer graphene. The QTM opens the way for new classes of experiments on quantum materials.

Effect of decoration route on the nanomechanical, adhesive, and force response of nanocelluloses-An in situ force spectroscopy study

Although cellulose derivatives are widely applied in high-tech materials, the relation between their force responses and their surface chemical properties in a biological environment as a function of pH is unknown. Here, interaction forces of surface modified cellulose nanocrystals (CNCs), lignin residual cellulose nanocrystals (LCNCs), and 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized cellulose nanofibres (TCNFs) with OSO3-, COO- and lignin chemical groups were measured using in situ peak force quantitative nanomechanical mapping and force spectroscopy in salt solution at two pH values. We found that the forces acting between the tip and CNC or LCNC are steric dominated showing long range and slow decay as a result of their low surface charge density. High Mw lignin contributed to the increased repulsion range for LCNCs compared to CNCs. The repulsion measured for TCNFs at the very short range was electrostatic force dominating showing a steep decay attributed to its high surface charge density. In the case of TCNFs, electrostatic double layer force was also evidenced by the attraction measured at secondary minima. In all the three cases the electro steric interactions are pH dependent. Dissipation maps verified that the force behavior for each material was related to structural conformation restriction of the groups at compression. The slow decayed repulsion of CNCs or LCNCs is related to a weak restriction of conformational change due to small surface groups or high molecular weight bound polymers forming flat layers, whereas the steep repulsion of TCNFs is attributed to a strong conformation restriction of carboxylic groups occurred by forming extended structure. Our results suggest that the force responses of the materials were dominated by surface charges and structural differences. TCNFs showed superior nanomechanical and repulsion properties over CNCs or LCNCs at neutral pH.

Mechanical Characterization of Two-Segment Free-Standing ZnO Nanowires Using Lateral Force Microscopy

Mechanical characterization of quasi one-dimensional nanostructures is essential for the design of novel nanoelectromechanical systems. However, the results obtained on basic mechanical quantities, such as Young's modulus and fracture strength, show significant standard deviation in the literature. This is partly because of diversity in the quality of the nanowire, and partly because of inappropriately performed mechanical tests and simplified mechanical models. Here we present orientation-controlled bending and fracture studies on wet chemically grown vertical ZnO nanowires, using lateral force microscopy. The lateral force signal of the atomic force microscope was calibrated by a diamagnetic levitation spring system. By acquiring the bending curves of 14 nanowires, and applying a two-segment mechanical model, an average bending modulus of 108 ± 17 GPa was obtained, which was 23% lower than the Young's modulus of bulk ZnO in the [0001] direction. It was also found that the average fracture strain and stress inside the nanowire was above 3.1 ± 0.3 % and 3.3 ± 0.3 GPa, respectively. However, the fracture of the nanowires was governed by the quality of the nanowire/substrate interface. The demonstrated technique is a relatively simple and productive way for the accurate mechanical characterization of vertical nanowire arrays.

Synthesis of Dendronized Polymers on the Au(111) Surface

Dendronized polymers (DPs) consist of a linear polymeric backbone with dendritic side chains. Fine-tuning of the functional groups in the side chains enriches the structural versatility of the DPs and imparts a variety of novel physical properties. Herein, the first on-surface synthesis of DPs is achieved via the postfunctionalization of polymers on Au(111), in which the surface-confinement-induced planar conformation and chiral configurations were unambiguously characterized. While the dendronized monomer was synthesized in situ on Au(111), the subsequent polymerization afforded only short, cross-linked DP chains owing to multiple side reactions. The postfunctionalization approach selectively produced brominated polyphenylene backbone moieties by the deiodination polymerization of 4-bromo-4″-iodo-5'-(4-iodophenyl)-1,1':3',1″-terphenyl on Au(111), which smoothly underwent divergent cross-coupling reactions with two different isocyanides to form two types of DPs as individual long chains.

Nanoscale 3D Tomography by In-Flight Fluorescence Spectroscopy of Atoms Sputtered by a Focused Ion Beam

Nanoscale fabrication and characterization techniques critically underpin a vast range of fields, including nanoelectronics and nanobiotechnology. Focused ion beam (FIB) techniques are appealing due to their high spatial resolution and widespread use for processing of nanostructured materials. Here, we introduce FIB-induced fluorescence spectroscopy (FIB-FS) as a nanoscale technique for spectroscopic detection of atoms sputtered by an ion beam. We use semiconductor heterostructures to demonstrate nanoscale lateral and depth resolution and show that it is limited by ion-induced intermixing of nanostructured materials. Sensitivity is demonstrated qualitatively by depth profiling of 3.5, 5, and 8 nm quantum wells and quantitatively by detection of trace-level impurities present at parts-per-million levels. The utility of the FIB-FS technique is demonstrated by characterization of quantum wells and Li-ion batteries. Our work introduces FIB-FS as a high-resolution, high-sensitivity, 3D analysis and tomography technique that combines the versatility of FIB nanofabrication techniques with the power of diffraction-unlimited fluorescence spectroscopy.

Enhancing Infrared Light-Matter Interaction for Deterministic and Tunable Nanomachining of Hexagonal Boron Nitride

Tailoring two-dimensional (2D) materials functionalities is closely intertwined with defect engineering. Conventional methods do not offer the necessary control to locally introduce and study defects in 2D materials, especially in non-vacuum environments. Here, an infrared pulsed laser focused under the metallic tip of an atomic force microscope cantilever is used to create nanoscale defects in hexagonal boron nitride (h-BN) and to subsequently investigate the induced lattice distortions by means of nanoscale infrared (nano-IR) spectroscopy. The effects of incoming light power, exposure time, and environmental conditions on the defected regions are considered. Nano-IR spectra complement the morphology maps by revealing changes in lattice vibrations that distinguish the defects formed under various environments. This work introduces versatile experimental avenues to trigger and probe local reactions that functionalize 2D materials through defect creation with a higher level of precision for applications in sensing, catalysis, optoelectronics, quantum computing, and beyond.

Polymer Nanocomposite Dielectrics: Understanding the Matrix/Particle Interface

Polymer nanocomposite dielectrics possess exceptional electric properties that are absent in the pristine dielectric polymers. The matrix/particle interface in polymer nanocomposite dielectrics is suggested to play decisive roles on the bulk material performance. Herein, we present a critical overview of recent research advances and important insights in understanding the matrix/particle interfacial characteristics in polymer nanocomposite dielectrics. The primary experimental strategies and state-of-the-art characterization techniques for resolving the local property-structure correlation of the matrix/particle interface are dissected in depth, with a focus on the characterization capabilities of each strategy or technique that other approaches cannot compete with. Limitations to each of the experimental strategy are evaluated as well. In the last section of this Review, we summarize and compare the three experimental strategies from multiple aspects and point out their advantages and disadvantages, critical issues, and possible experimental schemes to be established. Finally, the authors' personal viewpoints regarding the challenges of the existing experimental strategies are presented, and potential directions for the interface study are proposed for future research.

Development of a scanning tunneling microscope for variable temperature electron spin resonance

Recent advances in improving the spectroscopic energy resolution in scanning tunneling microscopy (STM) have been achieved by integrating electron spin resonance (ESR) with STM. Here, we demonstrate the design and performance of a homebuilt STM capable of ESR at temperatures ranging from 1 to 10 K. The STM is incorporated with a homebuilt Joule-Thomson refrigerator and a two-axis vector magnet. Our STM design allows for the deposition of atoms and molecules directly into the cold STM, eliminating the need to extract the sample for deposition. In addition, we adopt two methods to apply radio-frequency (RF) voltages to the tunnel junction: the early design of wiring to the STM tip directly and a more recent idea to use an RF antenna. Direct comparisons of ESR results measured using the two methods and simulations of electric field distribution around the tunnel junction show that, despite their different designs and capacitive coupling to the tunnel junction, there is no discernible difference in the driving and detection of ESR. Furthermore, at a magnetic field of ∼1.6 T, we observe ESR signals (near 40 GHz) sustained up to 10 K, which is the highest temperature for ESR-STM measurement reported to date, to the best of our knowledge. Although the ESR intensity exponentially decreases with increasing temperature, our ESR-STM system with low noise at the tunnel junction allows us to measure weak ESR signals with intensities of a few fA. Our new design of an ESR-STM system, which is operational in a large frequency and temperature range, can broaden the use of ESR spectroscopy in STM and enable the simple modification of existing STM systems, which will hopefully accelerate a generalized use of ESR-STM.

Scanning Tunneling Microscopy of Biological Structures: An Elusive Goal for Many Years

Scanning tunneling microscopy (STM) is a technique that can be used to directly observe individual biomolecules at near-molecular scale. Within this framework, STM is of crucial significance because of its role in the structural analysis, the understanding the imaging formation, and the development of relative techniques. Four decades after its invention, it is pertinent to ask how much of the early dream has come true. In this study, we aim to overview different analyses for DNA, lipids, proteins, and carbohydrates. The relevance of STM imaging is exhibited as an opportunity to assist measurements and biomolecular identification in nanobiotechnology, nanomedicine, biosensing, and other cutting-edge applications. We believe STM research is still an entire science research ecosystem for joining several areas of expertise towards a goal settlement that has been elusive for many years.

High-Throughput Preparation of Supramolecular Nanostructures on Metal Surfaces

One of the contemporary challenges in materials science lies in the rapid materials screening and discovery. Experimental sample libraries can be generated by high-throughput parallel synthesis to map the composition space for rapid material discoveries. Molecular self-assembly on surfaces has proved a useful way to construct nanostructures with interesting topologies or properties. Despite the strong dependence of molecular stoichiometry on the structures, high-throughput preparations of supramolecular surface nanostructures have been far less explored. Here, by integrating a physical mask into the standard ultra-high-vacuum (UHV) molecular preparation system we show a high-throughput approach for preparing supramolecular nanostructures of continuous composition spreads on metal surfaces. The spatially addressable sample libraries of supramolecular self-assemblies are characterized by high-resolution scanning probe microscopy. We could explore different binary nanostructures of varying molecular ratios on one single substrate. Moreover, we use the minimum spanning tree approach to qualitatively and quantitatively study the structural properties of the formed nanostructures. This high-throughput approach may accelerate the screening and exploration of surface-supported, low-dimensional nanostructures not limited to supramolecular interactions.

Electronic gap characterization at mesoscopic scale via scanning probe microscopy under ambient conditions

Electronic gaps play an important role in the electric and optical properties of materials. Although various experimental techniques, such as scanning tunnelling spectroscopy and optical or photoemission spectroscopy, are normally used to perform electronic band structure characterizations, it is still challenging to measure the electronic gap at the nanoscale under ambient conditions. Here we report a scanning probe microscopic technique to characterize the electronic gap with nanometre resolution at room temperature and ambient pressure. The technique probes the electronic gap by monitoring the changes of the local quantum capacitance via the Coulomb force at a mesoscopic scale. We showcase this technique by characterizing several 2D semiconductors and van der Waals heterostructures under ambient conditions.

Cryogen free spin polarized scanning tunneling microscopy and magnetic exchange force microscopy with extremely low noise

Spin polarized scanning tunneling microscopy (SP-STM) and magnetic exchange force microscopy (MExFM) are powerful tools to characterize spin structure at the atomic scale. For low temperature measurements, liquid helium cooling is commonly used, which has the advantage of generating low noise but has the disadvantage of having difficulties in carrying out measurements with long durations at low temperatures and measurements with a wide temperature range. The situation is just reversed for cryogen-free STM, where the mechanical vibration of the refrigerator becomes a major challenge. In this work, we have successfully built a cryogen-free system with both SP-STM and MExFM capabilities, which can be operated under a 9 T magnetic field provided by a cryogen-free superconducting magnet and in a wide temperature range between 1.4 and 300 K. With the help of our specially designed vibration isolation system, the noise is reduced to an extremely low level of 0.7 pm. The Fe/Ir(111) magnetic skyrmion lattice is used to demonstrate the technical novelties of our cryogen-free system.

Submolecular Insights into Interfacial Water by Hydrogen-Sensitive Scanning Probe Microscopy

ConspectusWater-solid interfaces have attracted extensive attention because of their crucial roles in a wide range of chemical and physical processes, such as ice nucleation and growth, dissolution, corrosion, heterogeneous catalysis, and electrochemistry. To understand these processes, enormous efforts have been made to obtain a molecular-level understanding of the structure and dynamics of water on various solid surfaces. By the use of scanning probe microscopy (SPM), many remarkable structures of H-bonding networks have been directly visualized, significantly advancing our understanding of the delicate competition between water-water and water-solid interactions. Moreover, the detailed dynamics of water molecules, such as diffusion, clustering, dissociation, and intermolecular and intramolecular proton transfer, have been investigated in a well-controlled manner by tip manipulation. However, resolving the submolecular structure of surface water has remained a great challenge for a long time because of the small size and light mass of protons. Discerning the position of hydrogen in water is not only crucial for the accurate determination of the structure of H-bonding networks but also indispensable in probing the proton transfer dynamics and the quantum nature of protons.In this Account, we focus on the recent advances in the H-sensitive SPM technique and its applications in probing the structures, dynamics, and nuclear quantum effects (NQEs) of surface water and ion hydrates at the submolecular level. First, we introduce the development of high-resolution scanning tunneling microscopy/spectroscopy (STM/S) and qPlus-based atomic force microscopy (qPlus-AFM), which allow access to the degrees of freedom of protons in both real and energy space. qPlus-AFM even allows imaging of interfacial water in a weakly perturbative manner by measuring the high-order electrostatic force between the CO-terminated tip and the polar water molecule, which enables the subtle difference of OH directionality to be discerned. Next we showcase the applications of H-sensitive STM/AFM in addressing several key issues related to water-solid interfaces. The surface wetting behavior and the H-bonding structure of low-dimensional ice on various hydrophilic and hydrophobic solid surfaces are characterized at the atomic scale. Then we discuss the quantitative assessment of NQEs of surface water, including proton tunneling and quantum delocalization. Moreover, the weakly perturbative and H-sensitive SPM technique can be also extended to investigations of water-ion interactions on solid surfaces, revealing the effect of hydration structure on the interfacial ion transport. Finally, we provide an outlook on the further directions and challenges for SPM studies of water-solid interfaces.

Atomic-Scale Observation of Sequential Oxidation Process on Co(0001)

Oxygen dissociation and activation on surfaces play a crucial role in heterogeneous catalysis and oxidation processes. In this study, we have conducted a series of scanning tunneling microscopy (STM) experiments combined with density functional theory calculation to investigate the oxidation process in a single crystal Co(0001) surface. For the first time, we show a comprehensive in situ STM study of the oxidation process of Co(0001) from an atomic point of view. With low O2 exposure at 90 K, chemisorbed oxygen pairs are observed showing a dumbbell-like STM feature. At a relatively higher temperature range of 160-250 K, a large-scale p(2 × 2)-O adlayer forms and the O adatoms show surprisingly high mobility. With the temperature of Co(0001) kept at ≥300 K, adsorption of oxygen leads to fast oxidation of the surface to amorphous cotton-like protrusions, which occur initially at the step/edge sites and interstitial defect sites.

An Assessment of MXenes through Scanning Probe Microscopy

Recently, exploring the unique properties of 2D materials has constituted a new wave of research, which lead these materials to enormous applications ranging from optoelectronics to healthcare systems. Due to the profusion of surface terminated functionalities, MXenes have become an emerging class of 2D materials that can be easily integrated with other materials. The versatility of MXenes allows to tune their finest material properties for further device applications. This review initiates with the classification of preparation methods of MXenes, where the authors elaborate on the significance of top-down approaches including the exfoliation of solid layers. Next, the focus is diverted toward the materials analysis of MXenes including their terminations analysis as well as their intriguing electrical and mechanical behaviors through scanning probe microscopy. Finally, critical challenges and perspectives for MXenes analysis and applications are explored and discussed. Therefore, this comprehensive review can encourage researchers, and offer a precise direction to employ MXenes in various applications.