Current concepts on the management of tooth wear: part 4. An overview of the restorative techniques and dental materials commonly applied for the management of tooth wear

Longevity of Anterior Composite Restorations for Localized Tooth Wear: A Scoping Review

(1) Objective: This scoping review evaluates composite restorations as a treatment modality for anterior tooth surface loss and investigates the longevity of the direct and indirect composites used herein. (2) Method: The search encompassed Medline, Embase, Web of Science, the Cochrane Library, and hand search utilizing the PICO framework. (3) Results: Eight studies were included in this review, comprising one randomized controlled trial, one retrospective, and six prospective studies. Some studies reported favorable outcomes for composite restorations in anterior teeth. Although not statistically significant, evidence supported the anterior composite as a viable short- to medium-term solution for managing tooth wear. Direct resin composites were deemed clinically and cost-effective when managing localized anterior tooth wear. However, limitations and inconsistencies in this scoping review limited definitive clinical recommendations. (4) Conclusions: Further research, including well-managed randomized controlled trials using standardized protocols and longer follow-up periods, is essential to reconfirm the long-term efficacies of anterior composite restorations when managing tooth wear. A robust research design and exacting protocols could facilitate more meaningful clinical conclusions.

The longevity of tooth-coloUred materials used for restoration of tooth wear: an evidence-based approach

Patients with tooth wear are commonly encountered in general dental practice. When indicated, restorative rehabilitation is often accompanied by a request from the patient for an aesthetic, tooth-coloured outcome. This article seeks to provide an evidence-based approach, focussing on the longevity of the materials which can be used for the restorative treatment of tooth wear, as well as their modes of failure and observed performance.

Total Rehabilitation Using Adhesive Dental Restorations in Patients with Severe Tooth Wear: A 5-Year Retrospective Case Series Study

INTRODUCTION

Currently, there is little clinical evidence to support the medium- and long-term survival and clinical performance of ultraconservative approaches using adhesive restorations in full-mouth restorations. The aim of this case series study was to evaluate the medium-term clinical performance of anterior and posterior adhesive restorations applied with direct and indirect techniques using resin composites and glass-ceramic-based materials.

MATERIALS AND METHODS

The inclusion criteria were an esthetic problem as the main reason for consultation and severe generalized wear of grade 2 to 4 according to the Tooth Wear Evaluation System (TWES 2.0). In addition, at each follow-up appointment, patients were required to submit a clinical-parameter-monitoring record according to the modified United States Public Health Service (USPHS) criteria.

RESULTS

Eight patients with severe tooth wear were treated through full rehabilitation in a private dental clinic in Spain by a single operator (AFC). A total of 212 restorations were performed, which were distributed as follows: 66 occlusal veneers, 26 palatal veneers and 120 vestibular veneers. No signs of marginal microleakage or postoperative sensitivity were observed in any occlusal, vestibular and/or palatal restoration after the follow-up period. The estimated survival rate of the 212 restorations was 90.1% over 60 months of observation, with a survival time of 57.6 months. Only 21 restorations had complications, which were mostly resolved with a direct composite resin. The dichotomous variables of the restoration type (posterior veneer, anterior veneer) and the type of restored tooth (anterior, posterior) were the risk predictors with statistically significant influences (p < 0.005) on the survival of the restorations.

CONCLUSION

According to the results of this study, there is a significantly higher risk of restorative complications in posterior teeth compared to anterior teeth. Also, it can be concluded that the indication of adhesive anterior and posterior restorations is justified in the total oral rehabilitation of patients with severe multifactorial tooth wear, as they are associated with a low risk of failure.

Surface Properties and Wear Resistance of Injectable and Computer-Aided Design/Computer Aided Manufacturing-Milled Resin Composite Thin Occlusal Veneers

OBJECTIVES

 This study was conducted to investigate the microhardness, surface roughness (Ra), and wear behavior of thin occlusal veneers (TOV) fabricated from different injectable composite materials and compare them to a Computer-Aided Design (CAD)/Computer-Aided Manufacturing (CAM) resin-based material.

MATERIALS AND METHODS

 A 1-mm occusal veneer preparation was done in a mandibular right second molar typodont tooth. The prepared model was duplicated to fabricate 32 replicas and divided into four groups (n = 8). Standard TOV were fabricated either indirectly from Cerasmart blocks, Cerasmart, GC (CS), or directly from Beautifil Injectable X, Shofu (BF), G-ænial Universal injectable, GC (GU), or SonicFill 2, Kerr (SF) using the injection molding technique. All the specimens were subjected to both thermomechanical cyclic loading (TMC) in a chewing simulator. Wear measurement was conducted by three-dimensional (3D) scanning of the veneered models before and after TMC, and the difference in the volume of the sample was recorded as the volumetric material loss due to wear. Ra before and after TMC and Vickers microhardness (VHN) of the tested materials were measured using standardized samples (n = 8). Representative samples from each group were investigated under a stereomicroscope and a scanning electron microscope.

STATISTICAL ANALYSIS

 One-way analysis of variance (ANOVA) was applied to detect the effect of material on VHN and wear. Two-way ANOVA was utilized to examine the impact of material and TMC on Ra. Multiple comparisons between the groups were conducted using Tukey's post hoc test (α = 0.05). The Pearson's correlation coefficient was used to determine the relationship between hardness and wear and between roughness and wear (α = 0.05).

RESULTS

 CS exhibited the highest mean VHN (p ≤ 0.001), followed by GU and SF which were statistically similar (p = 0.883) but significantly higher than BF (p < 0.001). After TMC, GU revealed the lowest Ra and volumetric wear (VW), followed by CS, BF, and SF (p < 0.5). A highly significant correlation existed between Ra and VW (p = 0.001, R 2 = 0.9803).

CONCLUSION

 The effect of TMC on the surface properties and wear resistance of the investigated TOV is material-dependent. GU injectable TOV are less influenced by TMC than CS milled TOV. In contrast, BF and SF demonstrated significant VW and Ra which might limit their clinical use as TOV.

Indications for the use of direct composite restorations in the management of tooth wear

The increasing prevalence of tooth surface loss has been widely reported. Patients present with varying degrees of tooth wear and consideration is given to whether a prevention and monitoring approach, or a treatment and restoration approach, is appropriate. A missed diagnosis or excessively prolonged monitoring risks progression to the detriment of a successful outcome, with the potential compromise on the quality and quantity of tooth structure available for predictable adhesive dentistry. Direct composite resin (DCR) restorations can be considered as a viable treatment option for all extents of tooth wear, including cases that have progressed to a severe degree. This paper aims to review the indications for DCR restorations in the management of tooth wear, using clinical cases to demonstrate their effectiveness.

Managing tooth wear with respect to quality of life: an evidence-based decision on when to intervene

Patients with more severe forms of tooth wear may require restorative rehabilitation. The decision to commence treatment must be taken carefully and there are a multitude of factors to consider. Alongside the clinical signs and symptoms typically associated with tooth wear, there is also the need to assess the impact of the condition on the patient's oral health-related quality of life. As part of the discussions relating to the attainment of informed consent for the restoration of the worn dentition, not only is it relevant to appropriately appraise the risks, benefits, costs, reasonable alternatives and likely prognosis of the proposed treatments, but to also elaborate on the expected impact of the intervention on the patient's oral health-related quality of life. The aim of this article is to review the evidence relating to the impact of the quality of life with the management of tooth wear, with the introduction of the concept of an evidence-based approach to decision-making when planning care.

Clinical considerations in the application of direct composite for tooth wear

Various techniques are available for the application of composite to restore worn teeth. Different techniques may be chosen based on the clinical presentation or clinician preference. However, for composite to be successful, there are numerous factors which must be considered in order to optimise the outcome. Pre-treatment steps, such as isolation for optimal moisture control and adequate surface preparation of the tooth, as well as the post build-up objectives of achieving a stable occlusion, good marginal adaptation and final aesthetics, are discussed in the paper.

Effect of Surface-Etching Treatment, Glaze, and the Antagonist on Roughness of a Hybrid Ceramic after Two-Body Wear

Stains and glaze are effective procedures for achieving an aesthetic smoothness on indirect restorations. Thus, the effect of surface-etching treatments previous to the stain layer and the glaze application on the occlusal and antagonist wear of a hybrid ceramic were evaluated against different antagonists. Disc-shaped samples were prepared from polymer-infiltrated ceramic network (PICN) blocks. The specimens were divided into eight groups, according to the surface-etching treatment and glaze application: P (polished specimens); PG (polishing plus glaze); E (hydrofluoric acid etching plus stain); EG (acid etching plus stain plus glaze); A (aluminum oxide sandblasting plus stain); AG (sandblasting plus stain plus glaze); S (self-etching primer plus stain); SG (self-etching primer plus stain plus glaze). Half of the samples were subjected to a wear simulation with a steatite antagonist, and the other half was tested using a PICN antagonist. The test parameters were: 15 N, 1.7 Hz, 6 mm of horizontal sliding, 5000 cycles. The discs and the antagonists' masses were measured before and after the wear tests. The average roughness and spacing defects were evaluated. The etching treatment affected the surface and antagonist mass loss when tested against steatite. AG showed the highest mass loss. This influence was not detected when using the PICN antagonist. The glaze application after staining ensures a smoother surface and avoids antagonist wear.

Treatment of Tooth Wear Using Direct or Indirect Restorations: A Systematic Review of Clinical Studies

Tooth wear is considered a well-developed issue in daily clinical practice; however, there is no standard protocol for treatment. The aim of this manuscript was to systematically review the literature to evaluate the clinical outcomes of direct or indirect restorations for treating tooth wear. A literature search was conducted through the PubMed MedLine, Scopus, ISI Web of Science, Scielo, and EMBASE databases up to 29 April 2022. Clinical studies evaluating the clinical performance of direct or indirect restorations for treating tooth wear for a minimum follow-up of 6 months were included in the review. A total of 2776 records were obtained from the search databases. After full-text reading, 16 studies were included in the qualitative analysis. Considering the high heterogenicity of the studies included, a meta-analysis could not be performed. All studies included the rehabilitation of anterior and posterior teeth with extensive wear, using both indirect and direct restorations for a maximum follow-up of 10 years. Restoration materials included ceramo-metal crowns, full gold crowns, lithium disilicate ceramic, zirconia, polymer infiltrated ceramic networks, and resin composites. Most of the reports assessed the survival rate of the restorations and the clinical features using the United States Public Health Service (USPHS) Evaluation System criteria. Contradictory discoveries were perceived concerning the type of restoration with better clinical performance. Considering the current literature available, there is no evidence in the superiority of any restoration technique to ensure the highest clinical performance for treating tooth wear.

The dental demolition derby: bruxism and its impact - part 1: background

Bruxism may lead to changes or damage to the oral and perioral tissues. Bruxism may occur during sleep or when awake. Many patients will not require active management; however, for some, intervention is required. Control of bruxism may be difficult, if not impossible, but the need exists for preservation of the dentition and quality of life. A prediction of risk to the tissues for the planning of interventions is difficult and relies upon evidence of past damage and assessment of future risks. Treatment options may need to be imaginative and rescuable. This series of papers will review the aetiology of bruxism, its impacts and treatment strategies for persistent bruxers who are at risk of, or suffering, tissue damage.

Minimally Invasive Rehabilitation of Posterior Erosive Tooth Wear: Two Case Reports of the One-Stage Dahl Approach

Rehabilitation of posterior erosive tooth wear can be especially challenging in the presence of substantial tooth structure loss and limited inter-occlusal space. This article describes two case reports illustrating a conservative approach using the one-step Dahl approach in the management of localized posterior erosive tooth wear. The occlusal surfaces of worn teeth in both cases were successfully restored using direct composite resin and gold onlay, respectively. The material was placed in supra-occlusion during the initial stage. This technique enables intrusion of affected worn teeth and the opposing counterpart. Eruption of the remaining dentition will occur after two to three months to re-establish a complete occlusal relationship. With proper treatment planning, the one-step Dahl approach offers a simpler and predictable positive outcome in restoring structurally compromised posterior worn teeth.

Survival and Success Rates of Monolithic Zirconia Restorations Supported by Teeth and Implants in Bruxer versus Non-Bruxer Patients: A Retrospective Study

The aim of this study was to assess retrospectively the survival and success rates of monolithic zirconia restorations supported by teeth and implants in bruxer versus non-bruxer patients. Methods: A total of 15 bruxer and 25 non-bruxer patients attended the recall appointment. The bruxer group (mean age of 61.2 ± 13.3 years and follow-up of 58.7 ± 16.8 months) were treated with 331 monolithic zirconia restorations, while the non-bruxer group, with a comparable mean age and follow-up time, were treated with 306 monolithic zirconia restorations. Clinical data were retrieved from the patients' files. At the recall appointment, all supporting teeth and implants were examined for biological and technical complications, and the restorations were evaluated using modified California Dental Association (CDA) criteria. Data were statistically analyzed using survival analysis methods. A significance level of p < 0.05 was used. A total of 31 versus 27 biologic and technical complications were recorded in the bruxer and non-bruxer groups, respectively. No significant differences were found between the two groups regarding overall complications and survival rate. Regarding the type of complication, a significantly higher rate of veneered porcelain chipping (p = 0.045) was observed in the bruxer group. With regard to biological complications, the only complications that exhibited a borderline, although not significant, difference were three fractured teeth exclusively in the bruxer group (p = 0.051), which were replaced with implant-supported restorations. Within the limitations of this study, we conclude that there were no significant differences in the overall survival and success rates of the monolithic zirconia restorations in bruxer versus non-bruxer patients, although veneered zirconia restorations and single tooth abutments exhibited a higher rate of complications in the bruxer group.

Adhesive Management of Anterior Tooth Wear in Combination with the Dahl Concept-A 27-Month Observational Case Series

Localized anterior maxillary tooth wear caused by erosion and attrition with loss of interocclusal space is difficult to manage. This observational case-series study reports six cases with worn anterior dentition treated with labial ceramic and palatal direct resin composite veneers at an increased vertical dimension of occlusion without restoration of unaffected posterior teeth. Thirty-six palatal direct veneers were made in six patients from a nanohybrid resin composite with the help of a wax-up-based template at an increased vertical dimension. After the complete re-establishment of posterior occlusion, 40 labial lithium-disilicate ceramic veneers were fabricated with a mock-up-guided method. The sandwich veneers were evaluated according to the United States Public Health Service (USPHS) criteria after a mean service time of 22.7 months. Re-establishment of posterior contacts as well as subjective patient satisfaction and function were evaluated. The overall success of the labial ceramic veneers was excellent. The quality of the palatal resin composite restorations was found to be good with predominantly "Alpha" scores. The marginal quality (11.1% and 33.3% of integrity and discoloration, respectively) and surface roughness (16.7%) showed small deteriorations indicated by "Beta" scores. The resin composite showed, in general, signs of wear facets which resulted in "Beta" scores in 44.4% of the cases. Posterior contacts re-established firmly within 4 weeks in all cases. Patient satisfaction with esthetics and function was high. The short-term outcome of this non-invasive treatment option is favorable and promising.

Clinical performance of direct composite resin restorations in a full mouth rehabilitation for patients with severe tooth wear: 5.5-year results

OBJECTIVES

To evaluate the 5.5-year performance of direct resin composite restorations, prescribed for patients with severe tooth wear, requiring full-mouth rehabilitation.

METHODS

A convenience sample of 34 patients were recruited to a prospective trial between December 2010 and June 2013. The participants were provided 1269 full-mouth direct resin composite restorations (Clearfil AP-X) by 5 experienced operators, using the DSO-technique. Treatment resulted in an increase in the vertical dimension of occlusion (VDO). Failure was assessed at three levels. Frequencies of failure were analysed using Kaplan Meier survival curves and the effects of the relevant variables calculated with a multifactorial Cox regression (p < 0.05).

RESULTS

Annual failure rates (for all levels of failure, 'Level 3- ') of ≤ 2.2% and ≤ 2.9% were respectively reported for the anterior and posterior restorations with a mean observation time of 62.4 months. The completion of an anterior restoration with the need for further appointments resulted in significantly more Level 2- & 3- failures. An evaluation of the performance of the premolar and posterior maxillary restorations showed significantly lowered risks of certain types of failures, compared to the molar and posterior mandibular restorations.

CONCLUSIONS

At 5.5 years, 2.3% of the overall restorations displayed catastrophic, (Level 1) failures. Molar restorations, posterior mandibular restorations and the anterior restorations requiring two further sessions for completion, were associated with significantly higher risks for failure.

CLINICAL SIGNIFICANCE

Direct resin composite can offer an acceptable medium-term option for the treatment of severe, generalized tooth wear; molar restorations may require higher maintenance.

The effect of pre-treatment levels of tooth wear and the applied increase in the vertical dimension of occlusion (VDO) on the survival of direct resin composite restorations

OBJECTIVES

To investigate the effects of the level of pre-treatment tooth wear and increasing the VDO on the performance of direct resin composite restorations for the rehabilitation of pathological tooth wear.

METHODS

Full-mouth (pre-treatment) grading was performed on digital greyscale scan records for 34 participants (35.3 ± 8.4 years) with signs of moderate-to-severe generalised tooth wear, using the Tooth Wear Evaluation System and the Basic Erosive Wear Examination. Each participant received full-mouth direct resin composite restorations, with increased VDO. The post-treatment increase in the VDO was determined. Recalls were planned after 1 month, and after 1, 3, and 5 years. Three 'levels' of restoration failure were described. The effects of the variables on the frequencies of restoration failure were calculated with a multivariable Cox regression, (p < 0.05).

RESULTS

1269 restorations were placed with a mean observation period of 62.4 months. Increasing the VDO by 1 mm significantly reduced the risks of all levels of anterior restoration failure (HR ≤ 0.62, p ≤ 0.025). A higher anterior BEWE surface score was associated with increased risks of Level 2- & 3- failures, (HR ≥ 1.29, p ≤ 0.019). Premolar restorations showed lower risks of Level 2- & 3- failure, compared to the molar restorations, (HR ≤ 0.5, p ≤ 0.005).

CONCLUSION

Levels of pre-treatment wear and the applied change in the VDO significantly affected failure risk.

CLINICAL RELEVANCE

Direct resin composite restorations for the rehabilitation of wear should be made as voluminous as possible, respecting the presenting biological, functional, and esthetic constraints.

Long-term results of a randomized clinical trial of 2 types of ceramic crowns in participants with extensive tooth wear

STATEMENT OF PROBLEM

Evidence is sparse regarding the long-term outcomes of restorative treatment of patients with extensive tooth wear.

PURPOSE

The purpose of this long-term prospective randomized clinical trial was to evaluate the performance and success rate of pressed lithium disilicate (LD) and translucent zirconia (TZ) crowns in participants with extensive tooth wear.

MATERIAL AND METHODS

A total of 62 participants with extensive tooth wear (17 women, 45 men; mean age 44.8 years; range 25-63 years) received a total of 713 crowns, LD=362 and TZ=351. Both types of crowns had chamfer preparations and were adhesively luted with dual-polymerizing composite resin cement (PANAVIA F 2.0; Kuraray Noritake Dental Inc). The restorations were clinically reevaluated on average 14, 31, 39, 54, and 65 months after insertion of the crowns according to the modified United States Public Health Service (USPHS) criteria.

RESULTS

After an observation period of up to 6 years, the survival rate for both types of crowns was 99.7%, with 1 lost LD crown after 1 year as a result of loss of retention and 1 lost TZ crown after 3 years because of tooth fracture at the cemento-enamel junction. The success rates were similar for both types of crowns: 98.6% for LD and 99.1% for TZ. Reasons for failures were that 3 participants in each group developed apical lesions, minimal ceramic fractures, or their crowns were rebonded after loss of adhesion. Assessment of color at baseline was significantly different with a better match for LD (84.8% Alfa, 15.2% Bravo) than for TZ crowns (36.5% Alfa, 63.5% Bravo), including TZ crowns with veneered porcelain (P<.001). Secondary caries and cracks did not occur. A post hoc analysis of clinical performance did not indicate any significant differences between extensive tooth wear with primarily mechanical or chemical factors.

CONCLUSIONS

No differences were found between the 2 types of ceramic materials concerning the long-term success and clinical performance, except that TZ crowns were rated by a blinded clinician as less esthetic than LD crowns. The use of high-strength ceramic materials, as well as reliable adhesive bonding, are probably the key factors in the long-term success of ceramic crowns in participants with extensive tooth wear independent of the specific etiology.

Restoration of severe localized tooth wear with zirconia-reinforced lithium silicate: A case report

Tooth wear is becoming an increasingly common cause for referral to restorative dentistry departments in the UK. Often, these cases are treated with resin-bonded composite direct restorations in the first instance. This article presents a case of 23-year-old patient who was treated using zirconia-reinforced lithium disilicate restorations.

CPD/Clinical Relevance: In certain cases, indirect restorations can be considered a first-line treatment, based on the presentation and patient factors. Each case should be evaluated on its own merits and careful consideration should be given to the evidence base and its relevance.

Awareness and Treatment Decisions on Tooth Wear among Jordanian Dentists and Prosthodontists: A Cross-Sectional Survey Study

Objectives

To assess the awareness, knowledge, and treatment decisions by dentists in Jordan regarding tooth wear.

Materials and Methods

A questionnaire was disseminated to a random sample of 200 general dentists and 100 prosthodontists working in the Ministry of Health, academia, private practices, and military services. Chi square and independent t-tests were performed for statistical analysis.

Results

Hundred and seventy-nine dentists and prosthodontists responded (59.7% response rate), of which 71.5% was females. 83.8% of the dentists reported they see patients with tooth wear. 61.5% registered wear lesions in the patient file, and 68.2% reported they find a probable cause of tooth wear. 87.2% of the dentists reported that bruxism is the most common cause in Jordan. 63.3% dentists treated their patients. 46.4% reported they “always” record a dietary history. 77.7% did not think that tooth wear is linked to caries. Low confidence levels were demonstrated among general practitioners in diagnosing and treating tooth wear. Regarding treatment decisions, most dentists decided to restore worn teeth with composite and to construct a night guard. Minimally affected anterior teeth were mostly treated with fluoride. Restoration of posterior worn teeth with overlay was suggested by one-third of the dentists.

Conclusion

The dentists and prosthodontists in Jordan are aware of tooth wear. However, examination and documentation were given a little priority by general dentists. On the other hand, there was an agreement among the dentists and prosthodontists on applying the minimally invasive approach. Clinical Significance. It is challenging for dentists to make the best treatment decision for tooth wear especially as no standard treatment is available. Therefore, this study investigated the awareness and treatment decisions of a sample of dentists and prosthodontists in Jordan.

Speech changes in patients with a full rehabilitation for severe tooth wear, a first evaluation study

Objective

The aim of this study was to evaluate changes in speech characteristics and self-perceived quality of speech in tooth wear patients, after occlusal rehabilitation.

Materials and methods

Patients with tooth wear were included in this study after informed consent. The amount of tooth wear was scored with Tooth Wear Evaluation System (TWES). To assess the perspective of the patient, the Dutch Speech Handicap Index was used (SHI). Acoustic analysis was performed to evaluate changes with the use of voice recordings. These were made before treatment, T0; directly after treatment, T1; 1 month after treatment, T2. With the use of PRAAT software, the spectral characteristic centre of gravity (COG) was evaluated for the sounds /s/, /f/, /v/, /d/, /t/, /m/.

Results

Recordings of 17 patients (14 men, 3 women, mean age 41.2 ± 10.4 years) were included. SHI scores did not change significantly between T0 and T2 (p = 0.054). A multiple regression model showed that for all sounds the intercept was negative, but statistically significant only for /s/ and /f/ between T0 and T1. The effect of the initial change (between T0 and T1) on the change between T1 and T2 was clearly negative for all sounds (p < 0.001), showing a rebound effect ranging between 29 and 68% of the initial change.

Conclusion

Tooth wear patients perceive improvement in speech function after treatment.

Clinical significance

Clinicians may explain to patients that speech is likely to alter for a short period due to treatment but that there will be a good adaption to the new situation.

Fracture Resistance of Monolithic Zirconia Crowns in Implant Prostheses in Patients with Bruxism

The aim of this study is to determine the minimum required thickness of a monolithic zirconia crown in the mandibular posterior area for patients with bruxism. Forty-nine full zirconia crowns, with seven different occlusal thicknesses of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1.0 mm, were made by using a computer-aided design/computer-aided manufacturing system (CAD/CAM). Seven crowns in each group were subjected to cyclic loading at 800 N and 5 Hz in a servohydraulic testing machine until fracture or completion of 100,000 cycles. Seven finite element models comprising seven different occlusal thicknesses of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1.0 mm were simulated using three different loads of vertical 800 N, oblique 10 degrees 800 N, and vertical 800 N + x N torque (x = 10, 50, and 100). The results of cyclic loading tests showed that the fracture resistance of the crown was positively associated with thickness. Specimen breakage differed significantly according to the different thicknesses of the prostheses (p < 0.01). Lowest von Mises stress values were determined for prostheses with a minimal thickness of 1.0 mm in different loading directions and with different forces. Zirconia specimens of 1.0 mm thickness had the lowest stress values and high fracture resistance and under 800 N of loading.

A survey on the prevalence and risk indicators of erosive tooth wear among adolescents in Guangzhou, South China

BACKGROUND

Erosive tooth wear (ETW) has become a crucial oral health problem over the decades in China.

OBJECTIVES

To explore the prevalence and risk indicators of ETW among adolescents in Guangzhou, south China.

METHODS

A cross-sectional survey of 720 participants was conducted in Guangzhou, using an equal-sized, stratified, multistage random sampling approach. The participants were from two different age groups (12- and 15-year-olds), 360 per group. The ratio of males to females was 1:1 in each group. ETW was recorded utilising the basic erosive wear examination (BEWE) index as the dependent variable. Independent variables included age, gender, region, socioeconomic status, dietary factors, oral health measures and others.

RESULTS

The prevalence rates (weighted) of ETW and dentin exposure (DE) were 56.1% and 26.2% among adolescents in Guangzhou, with mean teeth (weighted) of 1.8 ± 2.5 and 0.6 ± 1.5, respectively. No matter the prevalence or the mean teeth, the 15-year-olds were higher than the 12-year-olds; the mean teeth of ETW of males was higher than that of females; the mean teeth of ETW and DE of the adolescents of low socioeconomic status were higher than those of high socioeconomic status. Medium to high risk levels were found for 10.1%. In the multiple regression model, age, gender and taking acidic foods/drinks before sleep were associated with ETW.

CONCLUSIONS

Moderate ETW in the permanent dentition was common among adolescents in Guangzhou. However, the teeth involved were low. Dietary factors and demographics were the main risk indicators.

Comparative evaluation of the mechanical properties of CAD/CAM dental blocks

This study compares the mechanical properties of commercially available CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) millable dental blocks including Vita Enamic, Lava Ultimate, and MAZIC Duro. All the discs were cut in dimension of 1.2 mm in thickness and 12 mm in diameter, ground up to #1200 Sic papers and polished. The biaxial flexure strength of the ceramic discs was measured after thermocycling treatment and the broken surfaces were observed using scanning electron microscopy (SEM). The discs were brushed using a toothbrush testing machine under a 150 g load. Surface roughness and morphology were determined after toothbrushing cycles. Finally, the friction and wear behavior of the materials against an opposing tooth were studied using a reciprocating pin-on-plate test configuration. The vertical loss of dental cusp was measured, and the surface image was examined using field emission scanning electron microscopy (FE-SEM). The biaxial flexural strength data were subjected to Weibull analysis. To compare the significance between the groups, all data were analyzed by one-way analysis (ANOVA). The biaxial flexural strength of the Lava Ultimate and MAZIC Duro materials is significantly higher than that of Vita Enamic. In addition, Lava Ultimate and MAZIC Duro exhibited significantly smoother surfaces than that of Vita Enamic after toothbrushing. Lava Ultimate and MAZIC Duro also showed less wear to the opposing tooth than that of Vita Enamic. In addition, Lava Ultimate possesses more suitable mechanical properties than the Vita Enamic and Mazic Duro for use in oral clinical prosthesis.

Oral health-related impact profile in full-mouth restored patients with two different tooth-colored restoration materials

OBJECTIVES

To analyze the change of oral health impact profile (OHIP) in patients with full-mouth rehabilitations due to moderate/severe tooth wear dependent on different restorative materials (ceramic/experimental CAD/CAM composite).

MATERIALS AND METHODS

Twenty-nine healthy patients (15 male/14 female, age 44.6 ± 28.4 years) requiring full-mouth rehabilitation due to different degrees of tooth wear were instructed to fill the German version OHIP-G49 questionnaire before (baseline) and 30 days after prosthetic treatment with ceramic (n = 17) or experimental CAD/CAM composite (n = 12) restorations. Questions were divided into five dimensions: appearance, oral functions, psychosocial impact, linguistic limitations, and orofacial pain; changes between both OHIP-questionnaires for each question and patient were dissected by difference values, separately. Data were analyzed with the Kolmogorov-Smirnov, Wilcoxon's signed-rank, Kruskal-Wallis, Mann-Whitney, and Cronbach's alpha tests (significance level p = 0.01).

RESULTS

The appearance dimension showed the highest results (p < 0.001, 100% improvement with all values > 0); the linguistic limitations dimension presented the lowest improvement (p < 0.001). The other three dimensions were not statistically different. No statistical differences between the two materials depending on OHIP questionnaire results occurred.

CONCLUSIONS

The esthetic appearance of the patients was influenced positively by full-mouth rehabilitation, irrespective of the material used. Improvements were also made in the parameters "toothache" and "problem of food intake." No statements could be made for the parameter "language."

CLINICAL RELEVANCE

With an increasing number of patients with moderate/severe tooth wear, thorough knowledge about the improvement of OHIP is important. This information is advantageous for the consultation and handling of patients when complex treatments are planned.

The restorative management of microdontia

Microdontia is a dental abnormality that will often present to the dental practitioner due to the aesthetic concerns of the patient. Treatment is therefore aimed at addressing the aesthetics issue of the patient and this can present a number of challenges which may require a multidisciplinary approach in its management. This article presents the restorative management of localised and generalised microdontia.

Clinical guidance and an evidence-based approach for restoration of worn dentition by direct composite resin

This paper aims to provide the dentist with practical guidance on the technique for direct composite restoration of worn teeth. It is based on current evidence and includes practical advice regarding type of composite, enamel and dentine preparation, dentine bonding and stent design. The application of direct composite has the advantage of being additive, conserving as much of the remaining worn tooth as possible, ease of placement and adjustment, low maintenance and reversibility. A pragmatic approach to management is advocated, particularly as many of the cases are older patients with advanced wear. Several cases restored by direct composite build-ups illustrate what can be achieved. The restoration of the worn dentition may be challenging for many dentists. Careful planning and simple treatment strategies, however, can prove to be highly effective and rewarding. By keeping any intervention as simple as possible, problems with high maintenance are avoided and management of future failure is made easier. An additive rather than a subtractive treatment approach is more intuitive for worn down teeth. Traditional approaches of full-mouth rehabilitation with indirect cast or milled restorations may still have their place but complex treatment modalities will inevitably be more time consuming, more costly, possibly require specialist care and still have an unpredictable outcome. Composite resin restorations are a universal restorative material familiar to dentists from early-on in the undergraduate curriculum. This review paper discusses the application of composite to restore the worn dentition.

The restorative management of tooth wear involving the aesthetic zone

The aim of this article is to describe a systematic approach that facilitates the establishment of a clear and appropriate diagnosis when a dentate patient presents with tooth wear involving their aesthetic zone. It will also detail the protocols that are required to allow for the development of an acceptable aesthetic prescription within the limits of the functional constraints presented by the patient (where active restorative intervention may be indicated), as well as to communicate the manner by which this information can be transferred to ultimately enable the successful and predictable rehabilitation of the affected areas. An overview will also be provided of the tooth-coloured dental materials and restorative techniques that have been commonly applied to deliver the predictable and effective dental care of worn teeth in the aesthetic zone.

Worn is born: The role of the maxillo-mandibular relation in management of worn dentition

Worn dentition, often accompanied by occlusion changes such as reduced vertical dimension, poses a big challenge to both diagnosis and treatment. Current established causes fail to explain the observed tooth wearing patterns, and the treatments based on the documented pathogeneses are often unpredictable and require frequent maintenance. From the perspective of stomatognathic system, we postulate that the role of maxillo-mandibular relation is a crucial part in the tooth wear progression patterns, and should be well addressed in treatment planning. Incompatible occlusion with the inherent tendency of maxillo-mandibular relation has a profound effect on either wearing of natural teeth or failures of restorations. With the aid of cephalometrics and analysis of occlusion it is now possible to reduce this fallacy and achieve a harmony by re-designing the occlusion. According to our treated worn dentition cases, the restoring treatment guided by the tendency of maxillo-mandibular relation showed very promising results.

A Guided, Conservative Approach for the Management of Localized Mandibular Anterior Tooth Wear

The successful management of the worn mandibular anterior dentition may present an awkward challenge to the dental operator. The purpose of this article is to describe a case report illustrating the use of a guided, three-dimensional protocol for the ultra-conservative and predictable restoration of the worn lower anterior dentition using direct resin composite. This technique utilizes information based on established biomechanical and occlusal principles to fabricate a diagnostic wax-up, which is duplicated in dental stone. This is used to prepare a vacuum-formed modified stent, assisting the clinician to place directly bonded resin composite restorations to restore the worn lower anterior dentition. The technique, described in 2012 and referred to as 'injection moulding' has the potential to offer optimal form, function and an aesthetic outcome in an efficient manner. CPD/Clinical Relevance: This article aims to describe an alternative technique to simplify the processes involved with restoration of worn lower anterior teeth.

The tooth wear evaluation system: a modular clinical guideline for the diagnosis and management planning of worn dentitions

Tooth wear is a multifactorial condition, leading to the loss of dental hard tissues, viz. enamel and dentine. Tooth wear can be divided into the subtypes mechanical wear (attrition and abrasion) and chemical wear (erosion). Because of its multifactorial aetiology, tooth wear can manifest itself in many different representations, and therefore, it can be difficult to diagnose and manage the condition. A systematic approach is a sine qua non. In the below-described tooth wear evaluation system (TWES), all necessary tools for a clinical guideline are present in different modules. This allows the dental clinician, in a general practitioner setting as well as in a referral practice setting, to perform a state-of-the-art diagnostic process. To avoid the risk of a too cumbersome usage, the dental clinician can select only those modules that are appropriate for a given setting. The modules match with each other, which is indispensable and essential when different modules of the TWES are compared. With the TWES, it is possible to recognise the problem (qualifying), to grade its severity (quantifying), to diagnose the likely causes and to monitor (the progress of) the condition. In addition, a proposal for the classification of tooth wear is made. Further, it is possible to determine when to start a treatment, to make the decision which kind of treatment to apply and to estimate the level of difficulty of a restorative treatment.

Outcome of zirconia single crowns made by predoctoral dental students: a clinical retrospective study after 2 to 6 years of clinical service

STATEMENT OF PROBLEM

Zirconia has established its role as a reliable ceramic material for fixed prostheses.

PURPOSE

The purpose of this retrospective study was to evaluate the outcome of zirconia single crowns made by predoctoral students after 2 to 6 years of clinical service.

MATERIAL AND METHODS

A cohort of 88 patients treated with zirconia single crowns (mean 3 crowns per patient, range 1 to 12 crowns) from 2007 to 2010 by predoctoral dental students was identified. The patients were invited to attend a clinical examination.

RESULTS

Sixty-six participants (75%) took part in the clinical follow-up (30 women and 36 men; mean age 60.4 years, range 19 to 81 years). Altogether, 190 teeth with single crowns were examined, and the mean follow-up time was 3.88 years (1.85 to 6.04 years). The most common complications were chipping of veneering porcelain (4%) and loss of cementation (4%). The success rate of the zirconia single crowns after 2 to 6 years was 80% and the survival rate 89%.

CONCLUSIONS

Zirconia crowns can be successfully used in predoctoral dental education. The success rate of zirconia single crowns after 2 to 6 years was 80% and the survival rate was 89%, in accordance with previous studies.

The management of anterior tooth wear using gold palatal veneers in canine guidance

Localised anterior tooth wear can be managed using minimally invasive techniques with conservation of tooth structure and preservation of pulp vitality. This article describes and illustrates with two clinical cases, the management of localised tooth wear, with the restoration of canine guidance by a combination of gold palatal veneers and direct composite restorations.