Shaping the root canal system

The Complexity of the Root Canal Anatomy and Its Influence on Root Canal Debridement in the Apical Region: A Review

The main goal of root canal treatment is to eliminate the infection in the complex root canal system for the long-term preservation of a functional tooth. Proper debridement of the root canal system, especially in the apical portion, is essential for successful root canal treatment. The complexity of the canal anatomy in the apical region plays a crucial role in reducing the microbial load. Therefore, clinicians must have a thorough knowledge of the anatomy of the root canal system and its variations, especially in the apical portion. Root canal configurations in cross-section have been classified as round, oval, long oval, flattened, or irregularly shaped. Treating oval, long oval, flattened, or irregularly shaped canals is challenging and should be approached differently than a circular canal. Recognizing the root canal shape and apical anatomy determines the different strategies to be used in cleaning, shaping, and obturation to achieve the best result of root canal treatment. The recent development of the instrumentation system improves the treatment outcome for clinicians and patients. This review aimed to discuss the definition, prevalence, and instrumentation for cleaning and shaping in the apical area with the complexity of root canal systems. Therefore, with the aid of this review, we can better understand the variations in the anatomy of the root canal, especially at the apical portion.

Comparative evaluation of apical debris extrusion during root canal preparation using three different rotary file systems

Background: Endodontic success depends on the complete cleaning and shaping of the root canal. In order to achieve this goal, debris removal is essential. Even with improvements in instrument design, apical debris extrusion continues to be a cause of periradicular inflammation. The current study aimed to compare the amount of apically extruded debris throughout the canal instrumentation with TruNatomy, ProTaper Next, 2Shape rotary systems. Methods: A total of 60 freshly extracted single‑rooted mandibular premolars were used. An access opening was made, and a working length was estimated. The samples were arbitrarily allocated into three groups i.e. Group I: TruNatomy (n = 20), Group II: ProTaper Next (n = 20), Group III: 2Shape (n = 20). During the canal instrumentation, the extruded debris were collected in preweighed Eppendorf tubes. Post-instrumentation, the tubes were placed in a hot air oven at 140°C for five hours. For calculating the dry debris weight, the tube's pre-instrumentation weight was deducted from the post-instrumentation weight. The data was analysed using one‑way analysis of variance and post hoc Tukey's test. Results: Extrusion of debris was noted in all the specimens. TruNatomy rotary system showed least debris extrusion in comparison to ProTaper Next and 2Shape (P < 0.05). However, the results were statistically non-significant between ProTaper Next and 2Shape (P > 0.05). Conclusions: It was noted that all instruments apically extruded debris, with TruNatomy system being related to minimum extrusion.

Evaluation of the Canal Transportation Following Glide Path Preparation with Different Rotary Systems: A Comparative Study

Objectives. Ideal root canal shaping might be more challenging particularly in cases with severely curved canals or complex anatomical variations. Glide path preparation is suggested as a critical step to achieve ideal canal preparation. The present study is aimed at evaluating transportation at different levels of the canal following glide path preparation by five different path finders. Materials and Methods. The study was conducted on 100 S-shaped canal simulator blocks. Glide path was prepared in five groups including (1) Scout RaCe (#10 and #15, 0.02), (2) One G (#14, 0.03), (3) PathFile (#13 and #16, 0.02), (4) GPS (#15, 0.03), and (5) K file (#15, 0.02) (Control group). The first four groups were NiTi rotary instruments, while the last group was a stainless steel hand file. The aforementioned files were used after canal negotiation by a #10 stainless steel hand file. Before- and after-preparation photos were taken and were superimposed in Adobe PhotoShop CC 2019. Transportation measurements were conducted in Digimizer. Absolute canal transportation was calculated at 10 cross-sections. Intergroup and intragroup data analysis were conducted using one-way and repeated measures ANOVA tests, respectively, in SPSS 26.0. The significance level was set to 0.05. Results. Although K file led to significantly more transportation in the apical and middle thirds ( $p<0.001$ ), rotary groups were not statistically different. In the coronal third, K files led to significantly more transportation compared to Scout RaCe and PathFile ( $p<0.05$ ). Conclusion. Within the limitations of the present study, regardless of the recruited rotary system, glide path preparation using NiTi rotary instruments leads to less canal transportation compared to stainless steel hand files.

Quantitative Evaluation of Apically Extruded Debris of Root Canal Dentin Layer with WaveOne, ProTaper Next, ProTaper Gold Rotary File Systems

Endodontic flare-up or post-operative pain occurs when debris such as necrotic pulp tissue, dentin chips, irrigants, and microorganisms are extruded from the apical foramen intraoperatively into the periradicular tissue during root canal instrumentation. This study compared the amount of apical debris extrusion of the root canal dentin layer after using reciprocating and rotary file systems (WaveOne, ProTaper Next and ProTaper Gold). Sixty extracted human maxillary central incisors with one canal and closed apex were included in the study. Samples were randomly and equally divided into three groups (n = 20) according to the file systems used for preparation of the root canal. Teeth in the WO group were instrumented by WaveOne, while the PTN group were instrumented by ProTaper Next, and teeth samples in the PTG group were cleaned and shaped by ProTaper Gold. The mean apically extruded debris weight in grams was estimated using the modified Myers and Montgomery experimental model. Analysis of variance (ANOVA) test was used for the comparison of debris weight in three groups. Post hoc LSD test was applied for pairwise comparison of debris weight. The α value of significance was 0.05. The WO group had significantly lower mean debris weight than the PTN and PTG groups (p = 0.001). Post hoc pairwise comparison revealed that there was a statistically significant difference in mean debris weight between the WO group and PTN group (0.0215 vs. 0.0341, p = 0.001); and the WO group and PTG group (0.0215 vs. 0.0324, p = 0.003). Root canal preparations with different file systems were associated with apical extrusion of the debris from the root canal dentin layer. However, the WaveOne system resulted in a comparatively lower amount of apical debris layer extrusion than the ProTaper Next and ProTaper Gold rotary file systems.

On comprehensive analysis of root canal shaping ability of three endodontic files of different kinematics

Infection of the tooth's root canal requires what is called root canal treatment (RTC). The most important part of endodontic treatment is to shape the root canal and remove its infected portion using endodontic files of various protocols, kinematics and designs that suit the particular geometry. Cleaning and Shaping the canal efficiently remove the root canal bacterial biofilms or tissue remnants while keeping its natural geometry. The result is determined by shaping the ability of the relevant endodontic file. In the available literature, no norm has been established for the measurement of various endodontic files' ability to do effective shaping. We present in this study a method to analyse and measure the shaping ability of endodontic files of three different kinematics.

Dispersion of near-infrared laser energy through radicular dentine when using plain or conical tips

The aim of this study was to investigate the influence of tip design on patterns of laser energy dispersion through the dentine of tooth roots when using near-infrared diode lasers. Diode laser emissions of 810 or 940 nm were used in combination with optical fiber tips with either conventional plain ends or conical ends, to irradiate tooth roots of oval or round cross-sectional shapes. The lasers were operated in continuous wave mode at 0.5 W for 5 s with the distal end of the fiber tip placed in the apical or coronal third of the root canal at preset positions. Laser light exiting through the roots and apical foramen was imaged, and the extent of lateral spread calculated. There was a significant difference in infrared light exiting the root canal apex between plain and conical fiber tips for both laser wavelengths, with more forward transmission of laser energy through the apex for plain tips. For both laser wavelengths, there were no significant differences in emission patterns when the variable of canal shape was used and all other variables were kept the same (plain vs conical tip, tip position). To ensure optimal treatment effect and to prevent the risks of inadvertent laser effects on the adjacent periapical tissues, it is important to have a good understanding of laser transmission characteristics of the root canal and root dentine. Importantly, it is also essential to understand transmission characteristics of plain and conical fibers tips.