Tunica repair with acellular bladder matrix maintains corporal tissue function

Tissue anisotropy and collagenomics in porcine penile tunica albuginea: Implications for penile structure-function relationships and tissue engineering

The tunica albuginea (TA) of the penis is an elastic layer that serves a structural role in penile erection. Disorders affecting the TA cause pain, deformity, and erectile dysfunction. There is a substantial clinical need for engineered replacements of TA, but data are scarce on the material properties and biochemical composition of healthy TA. The objective of this study was to assess tissue organization, protein content, and mechanical properties of porcine TA to establish structure-function relationships and design criteria for tissue engineering efforts. TA was isolated from six pigs and subjected to histomorphometry, quantification of collagen content and pyridinoline crosslinks, bottom-up proteomics, and tensile mechanical testing. Collagen was 20 ± 2%/wet weight (WW) and 53 ± 4%/dry weight (DW). Pyridinoline content was 426 ±131 ng/mg WW, 1011 ± 190 ng/mg DW, and 45 ± 8 mmol/mol hydroxyproline. Bottom-up proteomics identified 14 proteins with an abundance of >0.1% of total protein. The most abundant collagen subtype was type I, representing 95.5 ± 1.5% of the total protein in the samples. Collagen types III, XII, and VI were quantified at 1.7 ± 1.0%, 0.8 ± 0.2%, and 0.4 ± 0.2%, respectively. Tensile testing revealed anisotropy: Young's modulus was significantly higher longitudinally than circumferentially (60 ± 18 MPa vs. 8 ± 5 MPa, p < 0.01), as was ultimate tensile strength (16 ± 4 MPa vs. 3 ± 3 MPa, p < 0.01). Taken together, the tissue mechanical and compositional data obtained in this study provide important benchmarks for the development of TA biomaterials. STATEMENT OF SIGNIFICANCE: The tunica albuginea of the penis serves an important structural role in physiologic penile erection. This tissue can become damaged by disease or trauma, leading to pain and deformity. Treatment options are limited. Little is known about the precise biochemical composition and biomechanical properties of healthy tunica albuginea. In this study, we characterize the tissue using proteomic analysis and tensile testing to establish design parameters for future tissue engineering efforts. To our knowledge, this is the first study to quantify tissue anisotropy and to use bottom-up proteomics to characterize the composition of penile tunica albuginea.

Application of biomaterials and tissue engineering in bladder regeneration

The primary functions of the bladder are storing urine under low and stable pressure and micturition. Various forms of trauma, tumors, and iatrogenic injuries can cause the loss of or reduce bladder function or capacity. If such damage is not treated in time, it will eventually lead to kidney damage and can even be life-threatening in severe cases. The emergence of tissue engineering technology has led to the development of more possibilities for bladder repair and reconstruction, in which the selection of scaffolds is crucial. In recent years, a growing number of tissue-engineered bladder scaffolds have been constructed. Therefore, this paper will discuss the development of tissue-engineered bladder scaffolds and will further analyze the limitations of and challenges encountered in bladder reconstruction.

The Significance of Biomechanics and Scaffold Structure for Bladder Tissue Engineering

Current approaches for bladder reconstruction surgery are associated with many morbidities. Tissue engineering is considered an ideal approach to create constructs capable of restoring the function of the bladder wall. However, many constructs to date have failed to create a sufficient improvement in bladder capacity due to insufficient neobladder compliance. This review evaluates the biomechanical properties of the bladder wall and how the current reconstructive materials aim to meet this need. To date, limited data from mechanical testing and tissue anisotropy make it challenging to reach a consensus on the native properties of the bladder wall. Many of the materials whose mechanical properties have been quantified do not fall within the range of mechanical properties measured for native bladder wall tissue. Many promising new materials have yet to be mechanically quantified, which makes it difficult to ascertain their likely effectiveness. The impact of scaffold structures and the long-term effect of implanting these materials on their inherent mechanical properties are areas yet to be widely investigated that could provide important insight into the likely longevity of the neobladder construct. In conclusion, there are many opportunities for further investigation into novel materials for bladder reconstruction. Currently, the field would benefit from a consensus on the target values of key mechanical parameters for bladder wall scaffolds.

Biocompatibility of different nanostructured TiO2 scaffolds and their potential for urologic applications

Despite great efforts in tissue engineering of the ureter, urinary bladder, and urethra, further research is needed in order to improve the patient's quality of life and minimize the economic burden of different lower urinary tract disorders. The nanostructured titanium dioxide (TiO₂) scaffolds have a wide range of clinical applications and are already widely used in orthopedic or dental medicine. The current study was conducted to synthesize TiO₂ nanotubes by the anodization method and TiO₂ nanowires and nanospheres by the chemical vapor deposition method. These scaffolds were characterized with scanning electron microscopy (SEM) and X-ray diffraction (XRD) methods. In order to test the urologic applicability of generated TiO₂ scaffolds, we seeded the normal porcine urothelial (NPU) cells on TiO₂ nanotubes, TiO₂ nanowires, TiO₂ nanospheres, and on the standard porous membrane. The viability and growth of the cells were monitored everyday, and after 3 weeks of culturing, the analysis with scanning electron microscope (SEM) was performed. Our results showed that the NPU cells were attached on all scaffolds; they were viable and formed a multilayered epithelium, i.e., urothelium. The apical plasma membrane of the majority of superficial NPU cells, grown on all three different TiO₂ scaffolds and on the porous membrane, exhibited microvilli; thus, indicating that they were at a similar differentiation stage. The maximal caliper diameter measurements of superficial NPU cells revealed significant alterations, with the largest cells being observed on nanowires and the smallest ones on the porous membrane. Our findings indicate that different nanostructured TiO₂ scaffolds, especially nanowires, have a great potential for tissue engineering and should be further investigated for various urologic applications.

Time-dependent bladder tissue regeneration using bilayer bladder acellular matrix graft-silk fibroin scaffolds in a rat bladder augmentation model

With advances in tissue engineering, various synthetic and natural biomaterials have been widely used in tissue regeneration of the urinary bladder in rat models. However, reconstructive procedures remain insufficient due to the lack of appropriate scaffolding, which should provide a waterproof barrier function and support the needs of various cell types. To address these problems, we have developed a bilayer scaffold comprising a porous network (silk fibroin [SF]) and an underlying natural acellular matrix (bladder acellular matrix graft [BAMG]) and evaluated its feasibility and potential for bladder regeneration in a rat bladder augmentation model. Histological (hematoxylin and eosin and Masson's trichrome staining) and immunohistochemical analyses demonstrated that the bilayer BAMG-SF scaffold promoted smooth muscle, blood vessel, and nerve regeneration in a time-dependent manner. At 12weeks after implantation, bladders reconstructed with the BAMG-SF matrix displayed superior structural and functional properties without significant local tissue responses or systemic toxicity. These results demonstrated that the bilayer BAMG-SF scaffold may be a promising scaffold with good biocompatibility for bladder regeneration in the rat bladder augmentation model.

Application of bladder acellular matrix in urinary bladder regeneration: the state of the art and future directions

Construction of the urinary bladder de novo using tissue engineering technologies is the “holy grail” of reconstructive urology. The search for the ideal biomaterial for urinary bladder reconstruction has been ongoing for decades. One of the most promising biomaterials for this purpose seems to be bladder acellular matrix (BAM). In this review we determine the most important factors, which may affect biological and physical properties of BAM and its regeneration potential in tissue engineered urinary bladder. We also point out the directions in modification of BAM, which include incorporation of exogenous growth factors into the BAM structure. Finally, we discuss the results of the urinary bladder regeneration with cell seeded BAM.

The effect of detergents on the basement membrane complex of a biologic scaffold material

The basement membrane complex (BMC) is a critical component of the extracellular matrix (ECM) that supports and facilitates the growth of cells. This study investigates four detergents commonly used in the process of tissue decellularization and their effect upon the BMC. The BMC of porcine urinary bladder was subjected to 3% Triton-X 100, 8mM 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS), 4% sodium deoxycholate or 1% sodium dodecyl sulfate (SDS) for 24h. The BMC structure for each treatment group was assessed by immunolabeling, scanning electron microscopy (SEM) and second harmonic generation (SHG) imaging of the fiber network. The composition was assessed by quantification of dsDNA, glycosaminoglycans (GAG) and collagen content. The results showed that collagen fibers within samples treated with 1% SDS and 8mM CHAPS were denatured, and the ECM contained fewer GAG compared with samples treated with 3% Triton X-100 or 4% sodium deoxycholate. Human microvascular endothelial cells (HMEC) were seeded onto each BMC and cultured for 7 days. Cell-ECM interactions were investigated by immunolabeling for integrin β-1, SEM imaging and semi-quantitative assessment of cellular infiltration, phenotype and confluence. HMEC cultured on a BMC treated with 3% Triton X-100 were more confluent and had a normal phenotype compared with HMEC cultured on a BMC treated with 4% sodium deoxycholate, 8mM CHAPS and 1% SDS. Both 8mM CHAPS and 1% SDS damaged the BMC to the extent that seeded HMEC were able to infiltrate the damaged sub-basement membrane tissue, showed decreased confluence and an atypical phenotype. The choice of detergents used for tissue decellularization can have a marked effect upon the integrity of the BMC of the resultant bioscaffold.

Polylactic-co-glycolic acid mesh coated with fibrin or collagen and biological adhesive substance as a prefabricated, degradable, biocompatible, and functional scaffold for regeneration of the urinary bladder wall

The chief obstacle for reconstructing the bladder is the absence of a biomaterial, either permanent or biodegradable, that will function as a suitable scaffold for the natural process of regeneration. In this study, polylactic-co-glycolic acid (PLGA) plus collagen or fibrin was evaluated for its suitability as a scaffold for urinary bladder construct. Human adipose-derived stem cells (HADSCs) were cultured, followed by incubation in smooth muscle cells differentiation media. Differentiated HADSCs were then seeded onto PLGA mesh supported with collagen or fibrin. Evaluation of cell-seeded PLGA composite immersed in culture medium was performed under a light and scanning microscope. To determine if the composite is compatible with the urodynamic properties of urinary bladder, porosity and leaking test was performed. The PLGA samples were subjected to tensile testing was pulled until PLGA fibers break. The results showed that the PLGA composite is biocompatible to differentiated HADSCs. PLGA-collagen mesh appeared to be optimal as a cell carrier while the three-layered PLGA-fibrin composite is better in relation to its leaking/ porosity property. A biomechanical test was also performed for three-layered PLGA with biological adhesive and three-layered PLGA alone. The tensile stress at failure was 30.82 ± 3.80 (MPa) and 34.36 ± 2.57 (MPa), respectively. Maximum tensile strain at failure was 19.42 ± 2.24 (mm) and 23.06 ± 2.47 (mm), respectively. Young's modulus was 0.035 ± 0.0083 and 0.043 ± 0.012, respectively. The maximum load at break was 58.55 ± 7.90 (N) and 65.29 ± 4.89 (N), respectively. In conclusion, PLGA-Fibrin fulfils the criteria as a scaffold for urinary bladder reconstruction.

A bilayered hybrid microfibrous PLGA--acellular matrix scaffold for hollow organ tissue engineering

Various synthetic and natural biomaterials have been used for regeneration of tissues and hollow organs. However, clinical outcome of reconstructive procedures remained challenging due to the lack of appropriate scaffold materials, supporting the needs of various cell types and providing a barrier function required in hollow organs. To address these problems, we have developed a bilayered hybrid scaffold comprising unique traits of polymeric microfibers and naturally derived acellular matrices and tested its potential for hollow organ regeneration in a rat bladder model. Hybrid scaffolds were fabricated by electrospinning of PLGA microfibers directly onto the abluminal surface of a bladder acellular matrix. Stability of this bilayered construct was established using modified spinning technique. The resulting 3-dimensional framework provided good support for growth, attachment and proliferation of primary bladder smooth muscle cells. Histological analysis in vivo at 4 and 8 weeks post implantation, revealed regeneration of bladder tissue structures consisting of urothelium, smooth muscle and collagen rich layers infiltrated with host cells and micro vessels. Furthermore, hybrid scaffolds maintained normal bladder capacity, whereas BAM recipients showed a significant distension of the bladder. These results demonstrate that this adaptable hybrid scaffold supports bladder regeneration and holds potential for engineering of bladder and other hollow organs.

Use of Urinary Bladder Matrix, a Bioactive, Acellular Scaffold, in Transplant Donor Scars and Androgenetic Alopecia: Initial Clinical Experience

Introduction:

Emerging regenerative medicine technologies have yet to be utilized in hair restoration surgery. Urinary bladder extracellular matrix (UBM) has shown promise in a wide variety of applications, inducing site-specific remodeling of injured tissue. This case series describes one clinician's experience in the first use of this regenerative material in hair restoration surgery.

Materials and Methods:

Twenty subjects underwent one of several protocols: (1) Treatment of 3-mm biopsies within donor site scars with UBM versus untreated controls, (2) Removal of a strip of donor site scar tissue and treatment of the site with UBM, (3) Soaking of occipital hair follicle grafts in a solution of UBM, or (4) Soaking of beard or temple hair follicle grafts.

Results:

At 6 months, hair was observed in biopsy sites that contained UBM, including donor scar areas that would not normally regrow hair, in contrast to the control biopsy sites. Similar results were observed for the strip excisions. UBM-soaked occipital, beard, and temple hair grafts consistently yielded higher than expected numbers of hair follicles.

Conclusions:

These cases provide anecdotal support for the hypothesized benefits of UBM regenerative technology in restoration therapy for men and women with androgenetic hair loss.

One and four layer acellular bladder matrix for fascial tissue reconstruction

To determine whether the use of multiple layers of acellular bladder matrix (ABM) is more suitable for the treatment of abdominal wall hernia than a single layered ABM. The feasibility, biocompatibility and mechanical properties of both materials were assessed and compared. Biocompatibility testing was performed on 4 and 1 layered ABM. The matrices were used to repair an abdominal hernia model in 24 rabbits. The animals were followed for up to 3 months. Immediately after euthanasia, the implant site was inspected and samples were retrieved for histology, scanning electron microscopy and biomechanical studies. Both acellular biomaterials demonstrated excellent biocompatibility. At the time of retrieval, there was no evidence of infection. The matrices demonstrated biomechanical properties comparable to native tissue. Three hernias (25%) were found in the single layer ABM group and only 1 hernia (8%) was found in the 4 layer ABM group. Histologically, the matrix structure was intact and the cell density within the matrices decreased with time. The dominant cell type present within the matrices shifted from lymphocytes to fibroblasts over time. Both ABMs maintained adequate strength over time when used for hernia repair, and there was an extremely low incidence of adhesion formation. The single layer ABM showed enhanced cellular integration, while the 4 layer ABM reduced hernia formation. Either of these matrices may be useful as an off-the-shelf biomaterial for patients requiring fascial repair.

Future sexual medicine physiological treatment targets

INTRODUCTION

Sexual function in men and women incorporates physiologic processes and regulation of the central and peripheral nervous systems, the vascular system, and the endocrine system. There is need for state-of-the-art information as there is an evolving research understanding of the underlying molecular biological factors and mechanisms governing sexual physiologic functions.

AIM

To develop an evidence-based, state-of-the-art consensus report on the current knowledge of the major cellular and molecular targets of biologic systems responsible for sexual physiologic function.

METHODS

State-of-the-art knowledge representing the opinions of seven experts from four countries was developed in a consensus process over a 2-year period.

MAIN OUTCOME MEASURES

Expert opinion was based on the grading of evidence-based medical literature, widespread internal committee discussion, public presentation, and debate.

RESULTS

Scientific investigation in this field is needed to increase knowledge and foster development of the future line of treatments for all forms of biological-based sexual dysfunction. This article addresses the current knowledge of the major cellular and molecular targets of biological systems responsible for sexual physiologic function. Future treatment targets include growth factor therapy, gene therapy, stem and cell-based therapies, and regenerative medicine.

CONCLUSIONS

Scientific discovery is critically important for developing new and increasingly effective treatments in sexual medicine. Broad physiologic directions should be vigorously explored and considered for future management of sexual disorders.

Composite scaffolds for the engineering of hollow organs and tissues

Several types of synthetic and naturally derived biomaterials have been used for augmenting hollow organs and tissues. However, each has desirable traits which were exclusive of the other. We fabricated a composite scaffold and tested its potential for the engineering of hollow organs in a bladder tissue model. The composite scaffolds were configured to accommodate a large number of cells on one side and were designed to serve as a barrier on the opposite side. The scaffolds were fabricated by bonding a collagen matrix to PGA polymers with threaded collagen fiber stitches. Urothelial and bladder smooth muscle cells were seeded on the composite scaffolds, and implanted in mice for up to 4 weeks and analyzed. Both cell types readily attached and proliferated on the scaffolds and formed bladder tissue-like structures in vivo. These structures consisted of a luminal urothelial layer, a collagen rich compartment and a peripheral smooth muscle layer. Biomechanical studies demonstrated that the tissues were readily elastic while maintaining their pre-configured structures. This study demonstrates that a composite scaffold can be fabricated with two completely different polymer systems for the engineering of hollow organs. The composite scaffolds are biocompatible, possess adequate physical and structural characteristics for bladder tissue engineering, and are able to form tissues in vivo. This scaffold system may be useful in patients requiring hollow organ replacement.