Modulating DNA translocation by a controlled deformation of a PDMS nanochannel device

Detection and identification of single ribonucleotide monophosphates using a dual in-plane nanopore sensor made in a thermoplastic via replication

We report the generation of ∼8 nm dual in-plane pores fabricated in a thermoplastic via nanoimprint lithography (NIL). These pores were connected in series with nanochannels, one of which served as a flight tube to allow the identification of single molecules based on their molecular-dependent apparent mobilities (i.e., dual in-plane nanopore sensor). Two different thermoplastics were investigated including poly(methyl methacrylate), PMMA, and cyclic olefin polymer, COP, as the substrate for the sensor both of which were sealed using a low glass transition cover plate (cyclic olefin co-polymer, COC) that could be thermally fusion bonded to the PMMA or COP substrate at a temperature minimizing nanostructure deformation. Unique to these dual in-plane nanopore sensors was two pores flanking each side of the nanometer flight tube (50 × 50 nm, width × depth) that was 10 μm in length. The utility of this dual in-plane nanopore sensor was evaluated to not only detect, but also identify single ribonucleotide monophosphates (rNMPs) by using the travel time (time-of-flight, ToF), the resistive pulse event amplitude, and the dwell time. In spite of the relatively large size of these in-plane pores (∼8 nm effective diameter), we could detect via resistive pulse sensing (RPS) single rNMP molecules at a mass load of 3.9 fg, which was ascribed to the unique structural features of the nanofluidic network and the use of a thermoplastic with low relative dielectric constants, which resulted in a low RMS noise level in the open pore current. Our data indicated that the identification accuracy of individual rNMPs was high, which was ascribed to an improved chromatographic contribution to the nano-electrophoresis apparent mobility. With the ToF data only, the identification accuracy was 98.3%. However, when incorporating the resistive pulse sensing event amplitude and dwell time in conjunction with the ToF and analyzed via principal component analysis (PCA), the identification accuracy reached 100%. These findings pave the way for the realization of a novel chip-based single-molecule RNA sequencing technology.

Homopolymer and heteropolymer translocation through patterned pores under fluctuating forces

We investigate the translocation of a semiflexible polymer through extended patterned pores using Langevin dynamics simulations, specifically focusing on the influence of a time-dependent driving force. Our findings reveal that, akin to its flexible counterpart, a rigid chain-like molecule translocates faster when subjected to an oscillating force than a constant force of equivalent average magnitude. The enhanced translocation is strongly correlated with the stiffness of the polymer and the stickiness of the pores. The arrangement of the pores plays a pivotal role in translocation dynamics, deeply influenced by the interplay between polymer stiffness and pore-polymer interactions. For heterogeneous polymers with periodically varying stiffness, the oscillating force introduces significant variations in the translocation time distributions based on segment sizes and orientations. On the basis of these insights, we propose a sequencing approach that harnesses distinct pore surface properties that are capable of accurately predicting sequences in heteropolymers with diverse bending rigidities.

Gain reversal in the translocation dynamics of a semiflexible polymer through a flickering pore

We study the driven translocation of a semiflexible polymer through an attractive extended pore with a periodically oscillating width. Similar to its flexible counterpart, a stiff polymer translocates through an oscillating pore more quickly than a static pore whose width is equal to the oscillating pore's mean width. This efficiency quantified as a gain in the translocation time, highlights a considerable dependence of the translocation dynamics on the stiffness of the polymer and the attractive nature of the pore. The gain characteristics for various polymer stiffness exhibit a trend reversal when the stickiness of the pore is changed. The gain reduces with increasing stiffness for a lower attractive strength of the pore, whereas it increases with increasing stiffness for higher attractive strengths. Such a dependence leads to the possibility of a high degree of robust selectivity in the translocation process.

Development of a transferable coarse-grained model of polydimethylsiloxane

Polydimethylsiloxane (PDMS) is a popular silicon-based polymer with advanced applications in microfluidics and nanocomposites. The slow dynamics of polymer chains in such complex systems hinders molecular dynamics investigations based on all atom force fields. This limitation can be overcome by exploiting finely tuned coarse-grained (CG) models. This paper develops a transferable CG model of PDMS, compatible with the recent Martini 3 force field, using structural and thermodynamic properties as targets in the parametrization, including a vast set of experimental free energies of transfer. We validate the model transferability by reproducing the correct scaling laws for the PDMS gyration radius in the melt and good and bad solvents. We successfully test the model by reproducing the wetting behavior of water and acetonitrile on PDMS and the phase behavior of a PDMS-peptide triblock copolymer system. This work sets the stage for computational studies involving the interaction between PDMS and many synthetic and biological molecules modeled within the Martini framework.

Label-Free Identification of Single Mononucleotides by Nanoscale Electrophoresis

Nanoscale electrophoresis allows for unique separations of single molecules, such as DNA/RNA nucleobases, and thus has the potential to be used as single molecular sensors for exonuclease sequencing. For this to be envisioned, label-free detection of the nucleotides to determine their electrophoretic mobility (i.e., time-of-flight, TOF) for highly accurate identification must be realized. Here, for the first time a novel nanosensor is shown that allows discriminating four 2-deoxyribonucleoside 5'-monophosphates, dNMPs, molecules in a label-free manner by nanoscale electrophoresis. This is made possible by positioning two sub-10 nm in-plane pores at both ends of a nanochannel column used for nanoscale electrophoresis and measuring the longitudinal transient current during translocation of the molecules. The dual nanopore TOF sensor with 0.5, 1, and 5 µm long nanochannel column lengths discriminates different dNMPs with a mean accuracy of 55, 66, and 94%, respectively. This nanosensor format can broadly be applicable to label-free detection and discrimination of other single molecules, vesicles, and particles by changing the dimensions of the nanochannel column and in-plane nanopores and integrating different pre- and postprocessing units to the nanosensor. This is simple to accomplish because the nanosensor is contained within a fluidic network made in plastic via replication.

Pore shapes effects on polymer translocation

We translocated polymers through pores of different shapes and interaction patterns in three dimensions by Langevin molecular dynamics. There were four simple cylindrical pores of the same length but with different diameters. The results showed that even though decreasing the pore diameter would always decrease the translocation velocity, it was strongly dependent on the shape of the increased pore diameter. Although increasing the pore diameter made the translocation faster in simple cylindrical pores, it was complicated in different pore shapes, e.g. increasing the diameter in the middle decreased the translocation velocity. Investigating polymer shapes through the translocation process and comparing the shapes by the cumulative waiting time for different pore structures reveals the non-equilibrium properties of translocation. Moreover, polymer shape parameters such as gyration radius, polymer center of mass, and average aspect ratio help us to distinguish different pore shapes and/or different polymers.

Anomalies of Ionic/Molecular Transport in Nano and Sub-Nano Confinement

Understanding and exploring the transport behaviors of ions and molecules in the nano and sub-nano confinement has great meaning in the fields of nanofluidics and basic transport physics. With the rapid progress in nanofabrication technology and effective characterization protocols, more and more anomalous transport behaviors have been observed and the ions/molecules inside small confinement can behave dramatically differently from bulk systems and present new mechanisms. In this Mini Review, we summarize the recent advances in the anomalous ionic/molecular transport behaviors in nano and sub-nano confinement. Our discussion includes the ionic/molecular transport of various confinement with different surface properties, static structures, and dynamic structures. Furthermore, we provide a brief overview of the latest applications of nanofluidics in membrane separation and energy conversion.

Nano-corrugated Nanochannels for In Situ Tracking of Single-Nanoparticle Translocation Dynamics

Dynamic motions of materials in liquid present a wealth of information concerning their physical properties. While fluorescence microscopy has been widely utilized for single-particle observations, the method cannot be used for characterizing fast motions of nanoscale objects due to the limited spatiotemporal resolution. Here, we report on a nanostructure strategy for nanoscale tracking of single nanoparticles. We fabricated a straight conduit in a SiO₂ layer on a Si wafer with lithographically defined 30 nm-sized protrusions formed on the side walls. We performed resistive pulse measurements at a 1 MHz sampling rate wherein we found n-stepped current traces signifying n number of nanoparticles moving concurrently inside the nanochannel. Ensemble average of the ionic current signals revealed a peculiar feature reflecting the slightly stronger ion blockage at the nanoconstrictions between the protrusions, thereby proving the ability of nano-corrugation as physical gates to signify the precise positions of objects inside the nanofluidic channel. This in situ tracking approach elucidated steady-state motions of the nanoparticles moving at a constant speed under the counter-balanced electrophoretic and viscous drag forces, which also allowed estimations of their surface charge densities. The present method can be utilized as a speedometer for nanoscale objects of virtually any size as long as they are able to be put through the sensing zones with potential applications for single-molecule time-of-flight mass spectrometry.

Confinement-Induced Ordering and Self-Folding of Cellulose Nanofibrils

Cellulose is a pervasive polymer, displaying hierarchical lengthscales and exceptional strength and stiffness. Cellulose's complex organization, however, also hinders the detailed understanding of the assembly, mesoscopic properties, and structure of individual cellulose building blocks. This study combines nanolithography with atomic force microscopy to unveil the properties and structure of single cellulose nanofibrils under weak geometrical confinement. By statistical analysis of the fibril morphology, it emerges that confinement induces both orientational ordering and self-folding of the fibrils. Excluded volume simulations reveal that this effect does not arise from a fibril population bias applied by the confining slit, but rather that the fibril conformation itself changes under confinement, with self-folding favoring fibril's free volume entropy. Moreover, a nonstochastics angular bending probability of the fibril kinks is measured, ruling out alternating amorphous-crystalline regions. These findings push forward the understanding of cellulose nanofibrils and may inspire the design of functional materials based on fibrous templates.

Theory of pore-driven and end-pulled polymer translocation dynamics through a nanopore: an overview

We review recent progress on the theory of dynamics of polymer translocation through a nanopore based on the iso-flux tension propagation (IFTP) theory. We investigate both pore-driven translocation of flexible and a semi-flexible polymers, and the end-pulled case of flexible chains by means of the IFTP theory and extensive molecular dynamics (MD) simulations. The validity of the IFTP theory can be quantified by the waiting time distributions of the monomers which reveal the details of the dynamics of the translocation process. The IFTP theory allows a parameter-free description of the translocation process and can be used to derive exact analytic scaling forms in the appropriate limits, including the influence due to the pore friction that appears as a finite-size correction to asymptotic scaling. We show that in the case of pore-driven semi-flexible and end-pulled polymer chains the IFTP theory must be augmented with an explicit trans side friction term for a quantitative description of the translocation process.

Transverse dielectrophoretic-based DNA nanoscale confinement

Confinement of single molecules within nanoscale environments is crucial in a range of fields, including biomedicine, genomics, and biophysics. Here, we present a method that can concentrate, confine, and linearly stretch DNA molecules within a single optical field of view using dielectrophoretic (DEP) force. The method can convert an open surface into one confining DNA molecules without a requirement for bonding, hydrodynamic or mechanical components. We use a transverse DEP field between a top coverslip and a bottom substrate, both of which are coated with a transparent conductive material. Both layers are attached using double-sided tape, defining the chamber. The nanofeatures lie at the “floor” and do not require any bonding. With the application of an alternating (AC) electric field (2 V_p-p) between the top and bottom electrodes, a DEP field gradient is established and used to concentrate, confine and linearly extend DNA in nanogrooves as small as 100-nm in width. We also demonstrate reversible loading/unloading of DNA molecules into nanogrooves and nanopits by switching frequency (between 10 kHz to 100 kHz). The technology presented in this paper provides a new method for single-molecule trapping and analysis.

Spatial confinement induces hairpins in nicked circular DNA

In living cells, DNA is highly confined in space with the help of condensing agents, DNA binding proteins and high levels of supercoiling. Due to challenges associated with experimentally studying DNA under confinement, little is known about the impact of spatial confinement on the local structure of the DNA. Here, we have used well characterized slits of different sizes to collect high resolution atomic force microscopy images of confined circular DNA with the aim of assessing the impact of the spatial confinement on global and local conformational properties of DNA. Our findings, supported by numerical simulations, indicate that confinement imposes a large mechanical stress on the DNA as evidenced by a pronounced anisotropy and tangent-tangent correlation function with respect to non-constrained DNA. For the strongest confinement we observed nanometer sized hairpins and interwound structures associated with the nicked sites in the DNA sequence. Based on these findings, we propose that spatial DNA confinement in vivo can promote the formation of localized defects at mechanically weak sites that could be co-opted for biological regulatory functions.

Chaperone-driven polymer translocation through nanopore: Spatial distribution and binding energy

Chaperones are binding proteins working as a driving force in biopolymer translocation. They bind to the biopolymer near the pore and prevent its backsliding. Chaperones may have different spatial distributions. Recently, we showed the importance of their spatial distribution in translocation and its effects on the sequence dependency of the translocation time. Here we focus on homopolymers and exponential distribution. Because of the exponential distribution of chaperones, the energy dependency of the translocation time will change. Here we find a minimum in translocation time versus binding effective energy (EBE) curve. The same trend can be seen in the scaling exponent of time versus polymer length, [Formula: see text] ([Formula: see text]), when plotted against EBE. Interestingly in some special cases, e.g. chaperones of size [Formula: see text] and with an exponential distribution rate of [Formula: see text], the minimum even reaches to an amount of less than 1 ([Formula: see text]). We explain the possibility of this rare result. Moreover, based on a theoretical discussion we show that, by taking into account the velocity dependency of the translocation on polymer length, one can truly predict the value of this minimum.

Sorting ring polymers by knot type with modulated nanochannels

In this theoretical study we discuss a novel method for sorting ring polymers according to their topological, knotted state. The proposed approach harnesses the rich dynamical behaviour of polymers confined inside spatially-modulated nanochannels. The longitudinal mobility of the rings is shown to have two key properties that are ideally suited for knot sorting. First, at fixed topology, the mobility has an intriguing oscillatory dependence on chain length. Second, the mobility ranking of different knot types is inverted upon increasing the chain length. We show that this complex interplay of channel geometry, chain length and topology can be rationalised within a simple theoretical framework based on Fick-Jacobs's diffusive theory. The results and the interpretative scheme ought to be useful for designing microfluidic devices with optimal topological sorting capabilities.

Frequency-control of protein translocation across an oscillating nanopore

The translocation of a lipid binding protein (LBP) is studied using a phenomenological coarse-grained computational model that simplifies both chain and pore geometry.

Simultaneous Electro-Optical Tracking for Nanoparticle Recognition and Counting

We present the first detailed experimental observation and analysis of nanoparticle electrophoresis through a nanochannel obtained with synchronous high-bandwidth electrical and camera recordings. Optically determined particle diffusion coefficients agree with values extracted from fitting electrical transport measurements to distributions from 1D Fokker-Planck diffusion-drift theory. This combined tracking strategy enables optical recognition and electrical characterization of nanoparticles in solution, which can have a broad range of applications in biology and materials science.

Nanopore tweezers: voltage-controlled trapping and releasing of analytes

Several devices for single-molecule detection and analysis employ biological and artificial nanopores as core elements. The performance of such devises strongly depends on the amount of time the analytes spend into the pore. This residence time needs to be long enough to allow the recording of a high signal-to-noise ratio analyte-induced blockade. We propose a simple approach, dubbed nanopore tweezing, for enhancing the trapping time of molecules inside the pore via a proper tuning of the applied voltage. This method requires the creation of a strong dipole that can be generated by adding a positive and a negative tail at the two ends of the molecules to be analyzed. Capture rate is shown to increase with the applied voltage while escape rate decreases. In this paper we rationalize the essential ingredients needed to control the residence time and provide a proof of principle based on atomistic simulations.

Conductivity-based detection techniques in nanofluidic devices

This review covers conductivity detection in fabricated nanochannels and nanopores. Improvements in nanoscale sensing are a direct result of advances in fabrication techniques, which produce devices with channels and pores with reproducible dimensions and in a variety of materials. Analytes of interest are detected by measuring changes in conductance as the analyte accumulates in the channel or passes transiently through the pore. These detection methods take advantage of phenomena enhanced at the nanoscale, such as ion current rectification, surface conductance, and dimensions comparable to the analytes of interest. The end result is the development of sensing technologies for a broad range of analytes, e.g., ions, small molecules, proteins, nucleic acids, and particles.

Experimental and Theoretical Investigation of Crystallographic Orientation Dependence of Nanoscratching of Single Crystalline Copper

In the present work, we perform experiments and molecular dynamics simulations to elucidate the underlying deformation mechanisms of single crystalline copper under the load-controlled multi-passes nanoscratching using a triangular pyramidal probe. The correlation of microscopic deformation behavior of the material with macroscopically-observed machining results is revealed. Moreover, the influence of crystallographic orientation on the nanoscratching of single crystalline copper is examined. Our simulation results indicate that the plastic deformation of single crystalline Cu under the nanoscratching is exclusively governed by dislocation mechanisms. However, there is no glissile dislocation structure formed due to the probe oscillation under the load-controlled mode. Both experiments and MD simulations demonstrate that the machined surface morphologies in terms of groove depth and surface pile-up exhibit strong crystallographic orientation dependence, because of different geometries of activated slip planes cutting with free surfaces and strain hardening abilities associated with different crystallographic orientations.

Stretching of DNA confined in nanochannels with charged walls

There is currently a growing interest in control of stretching of DNA inside nanoconfined regions due to the possibility to analyze and manipulate single biomolecules for applications such as DNA mapping and barcoding, which are based on stretching the DNA in a linear fashion. In the present work, we couple Finite Element Methods and Monte Carlo simulations in order to study the conformation of DNA molecules confined in nanofluidic channels with neutral and charged walls. We find that the electrostatic forces become more and more important when lowering the ionic strength of the solution. The influence of the nanochannel cross section geometry is also studied by evaluating the DNA elongation in square, rectangular, and triangular channels. We demonstrate that coupling electrostatically interacting walls with a triangular geometry is an efficient way to stretch DNA molecules at the scale of hundreds of nanometers. The paper reports experimental observations of λ-DNA molecules in poly(dimethylsiloxane) nanochannels filled with solutions of different ionic strength. The results are in good agreement with the theoretical predictions, confirming the crucial role of the electrostatic repulsion of the constraining walls on the molecule stretching.

DNA translocation through short nanofluidic channels under asymmetric pulsed electric field

Investigation of single molecule DNA dynamics in confined environments has led to important applications in DNA analysis, separation, and sequencing. Here, we studied the electrophoretic transport of DNA molecules through nanochannels shorter than the DNA contour length and calculated the associated translocation time curves. We found that the longer T4 DNA molecules required a longer time to traverse a fixed length nanochannel than shorter λ DNA molecules and that the translocation time decreased with increasing electric field which agreed with theoretical predictions. We applied this knowledge to design an asymmetric electric pulse and demonstrate the different responses of λ and T4 DNA to the pulses. We used Brownian dynamics simulations to corroborate our experimental results on DNA translocation behaviour. This work contributes to the fundamental understanding of polymer transport through nanochannels and may help in designing better separation techniques in the future.

Entropic depletion of DNA in triangular nanochannels

Using Monte Carlo simulations of a touching-bead model of double-stranded DNA, we show that DNA extension is enhanced in isosceles triangular nanochannels (relative to a circular nanochannel of the same effective size) due to entropic depletion in the channel corners. The extent of the enhanced extension depends non-monotonically on both the accessible area of the nanochannel and the apex angle of the triangle. We also develop a metric to quantify the extent of entropic depletion, thereby collapsing the extension data for circular, square, and various triangular nanochannels onto a single master curve for channel sizes in the transition between the Odijk and de Gennes regimes.