Fine tuning of graphene-metal adhesion by surface alloying

The highest oxidation state observed in graphene-supported sub-nanometer iron oxide clusters

Size-selected iron oxide nanoclusters are outstanding candidates for technological-oriented applications due to their high efficiency-to-cost ratio. However, despite many theoretical studies, experimental works on their oxidation mechanism are still limited to gas-phase clusters. Herein we investigate the oxidation of graphene-supported size-selected Fe_n clusters by means of high-resolution X-ray Photoelectron Spectroscopy. We show a dependency of the core electron Fe 2p_3/2 binding energy of metallic and oxidized clusters on the cluster size. Binding energies are also linked to chemical reactivity through the asymmetry parameter which is related to electron density of states at the Fermi energy. Upon oxidation, iron atoms in clusters reach the oxidation state Fe(II) and the absence of other oxidation states indicates a Fe-to-O ratio close to 1:1, in agreement with previous theoretical calculations and gas-phase experiments. Such knowledge can provide a basis for a better understanding of the behavior of iron oxide nanoclusters as supported catalysts.

Predicting Graphene Growth on Cu: Universal Kinetic Growth Model and Its Experimental Verification

The kinetics of the chemical vapor deposition (CVD) of graphene on Cu in CH₄ + H₂ were investigated by monitoring the graphene flake size as a function of CVD growth time. A growth model was set up which relates the CVD parameters to the mass action constant Q_exp of the methane decomposition reaction toward graphene at a given temperature T. Graphene growth was shown to proceed from pre-equilibrated adsorbed carbon (C_ad) within a wide CVD parameter range. The model not only leads to the correct scaling relation of the growth kinetics but quantitatively determines how far the CVD parameters deviate from thermal equilibrium and correctly predicts the absolute flake size increase per time. Fitting experimental data delivers the energy barrier for carbon detachment from the graphene island edge (E_det = 4.7 ± 0.3 eV) and the methane decomposition entropy toward C_ad on Cu (Δ_decS° = 260 ± 20 J mol^-1 K^-1). The latter value is used to estimate the vanishingly small C_ad equilibrium concentration of 3 × 10^-10 monolayers at 1045 °C. The universal validity of the model is proven by comparison with literature data providing the correct order of magnitude growth velocities up to 1000 μm/h. The performed reactor experiments deliver data that match the predicted flake growth velocity with a precision of about 50%. The obtained results can be used to calibrate any hot wall CVD reactor setup for the methane decomposition reaction toward graphene on Cu. The description can be directly applied for any hydrocarbon in the gas feed, and the technique can be easily applied for other catalytic support surfaces.

Atomic Undercoordination in Ag Islands on Ru(0001) Grown via Size-Selected Cluster Deposition: An Experimental and Theoretical High-Resolution Core-Level Photoemission Study

The possibility of depositing precisely mass-selected Ag clusters (Ag₁, Ag₃, and Ag₇) on Ru(0001) was instrumental in determining the importance of the in-plane coordination number (CN) and allowed us to establish a linear dependence of the Ag 3d_5/2 core-level shift on CN. The fast cluster surface diffusion at room temperature, caused by the low interaction between silver and ruthenium, leads to the formation of islands with a low degree of ordering, as evidenced by the high density of low-coordinated atomic configurations, in particular CN = 4 and 5. On the contrary, islands formed upon Ag₇ deposition show a higher density of atoms with CN = 6, thus indicating the formation of islands with a close-packed atomic arrangement. This combined experimental and theoretical approach, when applied to clusters of different elements, offers the perspective to reveal nonequivalent local configurations in two-dimensional (2D) materials grown using different building blocks, with potential implications in understanding electronic and reactivity properties at the atomic level.

Translucency of Graphene to van der Waals Forces Applies to Atoms/Molecules with Different Polar Character

Graphene has been proposed to be either fully transparent to van der Waals interactions to the extent of allowing switching between hydrophobic and hydrophilic behavior, or partially transparent (translucent), yet there has been considerable debate on this topic, which is still ongoing. In a combined experimental and theoretical study we investigate the effects of different metal substrates on the adsorption energy of atomic (argon) and molecular (carbon monoxide) adsorbates on high-quality epitaxial graphene. We demonstrate that while the adsorption energy is certainly affected by the chemical composition of the supporting substrate and by the corrugation of the carbon lattice, the van der Waals interactions between adsorbates and the metal surfaces are partially screened by graphene. Our results indicate that the concept of graphene translucency, already introduced in the case of water droplets, is found to hold more generally also in the case of single polar molecules and atoms, which are apolar.

The adsorption of silicon on an iridium surface ruling out silicene growth

The adsorption of Si atoms on a metal surface might proceed through complex surface processes, whose rate is determined differently by factors such as temperature, Si coverage, and metal cohesive energy. Among other transition metals, iridium is a special case since the Ir(111) surface was reported first, in addition to Ag(111), as being suitable for the epitaxy of silicene monolayers. In this study we followed the adsorption of Si on the Ir(111) surface via high resolution core level photoelectron spectroscopy, starting from the clean metal surface up to a coverage exceeding one monolayer, in a temperature range between 300 and 670 K. Density functional theory calculations were carried out in order to evaluate the stability of the different Si adsorption configurations as a function of the coverage. Results indicate that, at low coverage, the Si adatoms tend to occupy the hollow Ir sites, although a small fraction of them penetrates the first Ir layer. Si penetration of the Ir surface can take place if the energy gained upon Si adsorption is used to displace the Ir surface atoms, rather then being dissipated differently. At a Si coverage of ∼1 monolayer, the Ir 4f spectrum indicates that not only the metal surface but also the layers underneath are perturbed. Our results point out that the Si/Ir(111) interface is unstable towards Si-Ir intermixing, in agreement with the silicide phase formation reported in the literature for the reverted interface.

Spectroscopic observation of oxygen dissociation on nitrogen-doped graphene

Carbon nanomaterials’ reactivity towards oxygen is very poor, limiting their potential applications. However, nitrogen doping is an established way to introduce active sites that facilitate interaction with gases. This boosts the materials’ reactivity for bio-/gas sensing and enhances their catalytic performance for the oxygen reduction reaction. Despite this interest, the role of differently bonded nitrogen dopants in the interaction with oxygen is obscured by experimental challenges and has so far resisted clear conclusions. We study the interaction of molecular oxygen with graphene doped via nitrogen plasma by in situ high-resolution synchrotron techniques, supported by density functional theory core level simulations. The interaction leads to oxygen dissociation and the formation of carbon-oxygen single bonds on graphene, along with a band gap opening and a rounding of the Dirac cone. The change of the N 1 s core level signal indicates that graphitic nitrogen is involved in the observed mechanism: the adsorbed oxygen molecule is dissociated and the two O atoms chemisorb with epoxy bonds to the nearest carbon neighbours of the graphitic nitrogen. Our findings help resolve existing controversies and offer compelling new evidence of the ORR pathway.

Band Alignment and Minigaps in Monolayer MoS2-Graphene van der Waals Heterostructures

Two-dimensional layered MoS2 shows great potential for nanoelectronic and optoelectronic devices due to its high photosensitivity, which is the result of its indirect to direct band gap transition when the bulk dimension is reduced to a single monolayer. Here, we present an exhaustive study of the band alignment and relativistic properties of a van der Waals heterostructure formed between single layers of MoS2 and graphene. A sharp, high-quality MoS2-graphene interface was obtained and characterized by micro-Raman spectroscopy, high-resolution X-ray photoemission spectroscopy (HRXPS), and scanning high-resolution transmission electron microscopy (STEM/HRTEM). Moreover, direct band structure determination of the MoS2/graphene van der Waals heterostructure monolayer was carried out using angle-resolved photoemission spectroscopy (ARPES), shedding light on essential features such as doping, Fermi velocity, hybridization, and band-offset of the low energy electronic dynamics found at the interface. We show that, close to the Fermi level, graphene exhibits a robust, almost perfect, gapless, and n-doped Dirac cone and no significant charge transfer doping is detected from MoS2 to graphene. However, modification of the graphene band structure occurs at rather larger binding energies, as the opening of several miniband-gaps is observed. These miniband-gaps resulting from the overlay of MoS2 and the graphene layer lattice impose a superperiodic potential.

Fabrication of 2D Heterojunction in Graphene via Low Energy N2(+) Irradiation

Substitutional doping in graphene is locally induced with very low energy nitrogen ions. Irradiated and nonirradiated areas exhibit different charge carrier densities and are separated by a sharp boundary, stable up to 750 °C. The way towards lithographic control of the electronic properties of graphene by ion irradiation is paved, providing a proof of principle for the fabrication of 2D graphene-based heterojunctions.

Cerium Oxide Nanoclusters on Graphene/Ru(0001): Intercalation of Oxygen via Spillover

Cerium oxide is an important catalytic material known for its ability to store and release oxygen, and as such, it has been used in a range of applications, both as an active catalyst and as a catalyst support. Using scanning tunneling microscopy and Auger electron spectroscopy, we investigated oxygen interactions with CeOx nanoclusters on a complete graphene monolayer-covered Ru(0001) surface at elevated temperatures (600-725 K). Under oxidizing conditions (PO2 = 1 × 10(-7) Torr), oxygen intercalation under the graphene layer is observed. Time dependent studies demonstrate that the intercalation proceeds via spillover of oxygen from CeOx nanoclusters through the graphene (Gr) layer onto the Ru(0001) substrate and extends until the Gr layer is completely intercalated. Atomically resolved images further show that oxygen forms a p(2 × 1) structure underneath the Gr monolayer. Temperature dependent studies yield an apparent kinetic barrier for the intercalation of 1.21 eV. This value correlates well with the theoretically determined value for the reduction of small CeO2 clusters reported previously. At higher temperatures, the intercalation is followed by a slower etching of the intercalated graphene (apparent barrier of 1.60 eV). Vacuum annealing of the intercalated Gr leads to the formation of carbon monoxide, causing etching of the graphene film, demonstrating that the spillover of oxygen is not reversible. In agreement with previous studies, no intercalation is observed on a complete graphene monolayer without CeOx clusters, even in the presence of a large number of point defects. These studies demonstrate that the easily reducible CeOx clusters act as intercalation gateways capable of efficiently delivering oxygen underneath the graphene layer.

Graphene growth and properties on metal substrates

Graphene-metal interface as one of the interesting graphene-based objects attracts much attention from both application and fundamental science points of view. This paper gives a timely review of the recent experimental works on the growth and the electronic properties of the graphene-metal interfaces. This work makes a link between huge amount of experimental and theoretical data allowing one to understand the influence of the metallic substrate on the electronic properties of a graphene overlayer and how its properties can be modified in a controllable way. The further directions of studies and applications of the graphene-metal interfaces are discussed.

Cathode lens spectromicroscopy: methodology and applications

The implementation of imaging techniques with low-energy electrons at synchrotron laboratories allowed for significant advancement in the field of spectromicroscopy. The spectroscopic photoemission and low energy electron microscope, SPELEEM, is a notable example. We summarize the multitechnique capabilities of the SPELEEM instrument, reporting on the instrumental aspects and the latest developments on the technical side. We briefly review applications, which are grouped into two main scientific fields. The first one covers different aspects of graphene physics. In particular, we highlight the recent work on graphene/Ir(100). Here, SPELEEM was employed to monitor the changes in the electronic structure that occur for different film morphologies and during the intercalation of Au. The Au monolayer, which creeps under graphene from the film edges, efficiently decouples the graphene from the substrate lowering the Dirac energy from 0.42 eV to 0.1 eV. The second field combines magnetism studies at the mesoscopic length scale with self-organized systems featuring ordered nanostructures. This example highlights the possibility to monitor growth processes in real time and combine chemical characterization with X-ray magnetic circular dichroism-photoemission electron microscopy (XMCD-PEEM) magnetic imaging by using the variable photon polarization and energy available at the synchrotron source.