Facile and green synthesis of palladium nanoparticles-graphene-carbon nanotube material with high catalytic activity

Lignosulfonate-Assisted In Situ Deposition of Palladium Nanoparticles on Carbon Nanotubes for the Electrocatalytic Sensing of Hydrazine

This paper presents a novel modified electrode for an amperometric hydrazine sensor based on multi-walled carbon nanotubes (MWCNTs) modified with lignosulfonate (LS) and decorated with palladium nanoparticles (NPds). The MWCNT/LS/NPd hybrid was characterized by atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The electrochemical properties of the electrode material were evaluated using cyclic voltammetry and chronoamperometry. The results showed that GC/MWCNT/LS/NPd possesses potent electrocatalytic properties towards the electro-oxidation of hydrazine. The electrode demonstrated exceptional electrocatalytic activity coupled with a considerable sensitivity of 0.166 μA μM-1 cm-2. The response was linear from 3.0 to 100 µM L-1 and 100 to 10,000 µM L-1, and the LOD was quantified to 0.80 µM L-1. The efficacy of the modified electrode as an electrochemical sensor was corroborated in a study of hydrazine determination in water samples.

Advances in Matrix-Supported Palladium Nanocatalysts for Water Treatment

Advanced catalysts are crucial for a wide range of chemical, pharmaceutical, energy, and environmental applications. They can reduce energy barriers and increase reaction rates for desirable transformations, making many critical large-scale processes feasible, eco-friendly, energy-efficient, and affordable. Advances in nanotechnology have ushered in a new era for heterogeneous catalysis. Nanoscale catalytic materials are known to surpass their conventional macro-sized counterparts in performance and precision, owing it to their ultra-high surface activities and unique size-dependent quantum properties. In water treatment, nanocatalysts can offer significant promise for novel and ecofriendly pollutant degradation technologies that can be tailored for customer-specific needs. In particular, nano-palladium catalysts have shown promise in degrading larger molecules, making them attractive for mitigating emerging contaminants. However, the applicability of nanomaterials, including nanocatalysts, in practical deployable and ecofriendly devices, is severely limited due to their easy proliferation into the service environment, which raises concerns of toxicity, material retrieval, reusability, and related cost and safety issues. To overcome this limitation, matrix-supported hybrid nanostructures, where nanocatalysts are integrated with other solids for stability and durability, can be employed. The interaction between the support and nanocatalysts becomes important in these materials and needs to be well investigated to better understand their physical, chemical, and catalytic behavior. This review paper presents an overview of recent studies on matrix-supported Pd-nanocatalysts and highlights some of the novel emerging concepts. The focus is on suitable approaches to integrate nanocatalysts in water treatment applications to mitigate emerging contaminants including halogenated molecules. The state-of-the-art supports for palladium nanocatalysts that can be deployed in water treatment systems are reviewed. In addition, research opportunities are emphasized to design robust, reusable, and ecofriendly nanocatalyst architecture.

Flexible reusable hierarchical hybrid catalyst for rapid and complete degradation of triclosan in water

A flexible, durable, and reusable nanocatalyst system was fabricated by anchoring palladium nanoparticles on carbon nanotube (CNT) carpets covalently attached to carbon cloth. These hierarchical hybrid materials were tested for catalytic degradation of triclosan (TCS), an emerging contaminant. Materials were characterized using scanning & transmission electron microscopy techniques (SEM and TEM), X-Ray Diffraction (XRD), and X-Ray Photoelectron Spectroscopy (XPS). The reaction kinetics was studied using HPLC and reaction pathways proposed based on LC-MS/GC-MS analyses. In the presence of hydrogen, complete step-wise chlorine removal was seen until complete dechlorination was accomplished. The pseudo-first-order rate constant was measured to be orders of magnitude higher than earlier reported values. Moreover, the same material was usable for multiple cycles in flowing water. This study demonstrates that robustness and reusability of larger structural materials can be combined with the ultra-high surface activity of nanocatalysts to provide practical and eco-friendly solutions for water sustainability.

Enhanced Arsenic Removal from Aqueous Solution by Fe/Mn-C Layered Double Hydroxide Composite

A novel material named Fe/Mn-C layered double hydroxide composite (Fe/Mn-C-LDH) was synthesized to remove arsenic from an aqueous solution. The removal performance of the composite toward arsenic ions was studied through the batch experiments. The experiment results showed that Fe/Mn-C-LDH exhibited a high adsorption capacity of 46.47 mg/g for As(III) and 37.84 mg/g for As(V) at 318 K, respectively. In addition, the investigation of the release of Fe3+ and Mn2+ in the process of arsenic adsorption revealed that the Fe/Mn-C-LDH exhibited better stability than Fe/Mn-layer double hydroxide (Fe/Mn-LDH) with fewer Mn2+ and Fe3+ releasing under the same condition. The BET results showed that the specific surface area of Fe/Mn-C-LDH decreased after adsorption of As (III) and As (V). Furthermore, the Density Functional Theory (DFT) calculation results proved that the adsorbent combining arsenic by T-site to produce a better adsorption effect for arsenic. Possessing better stability and adsorption capacity, Fe/Mn-C-LDH could potentially serve as a perfect adsorbent for arsenic removal from an aqueous environment. It would provide a promising approach for removing heavy metal from the aquatic environment in the future.

Ultrasonic-assisted synthesis of two dimensional coral-like Pd nanosheets supported on reduced graphene oxide for enhanced electrocatalytic performance

Two dimensional (2D) Pd nanosheets supported on reduced graphene oxide (Pd/rGO) were prepared through a sonochemical routine induced by cetyltrimethylammonium bromide (CTAB). Coral-like porous Pd nanosheets (Pd/rGO-u) were obtained under the sonication condition (25 kHz, 600 W, ultrasonic transducer), while square Pd nanosheets (Pd/rGO-c) were produced via traditional chemical reduction. The size of Pd nanosheets of Pd/rGO-u and Pd/rGO-c are 69.7 nm and 59.7 nm, and the thickness are 4.6 nm and 4.4 nm, respectively. The carrier GO was proved to be partially reduced to rGO with good electrical conductivity and oxygen-containing groups facilitated a good dispersion of Pd nanosheets. The interaction between GO and CTAB made the alkyl chain assembles to a 2D lamella micelles which limit the growth of Pd atoms resulting in the formation of 2D nanosheets. A high ultrasonic power promotes the reduction and the formation of porous structure. Additionally, Pd/rGO-u exhibited a favorable electrocatalytic performance toward oxygen reduction reaction (ORR) in alkaline condition, which provided a potential synthetic strategy assisted by sonication for high-performance 2D materials.

Energy-Efficient Rational Designing of Multifunctional Nanocomposites by Preferential Anchoring of Metal Ions via Fermi Level Positioning of Carbon Nanostructures

Despite the availability and dedicated studies on a variety of carbon nanostructures, amorphous carbon is still a preferred support for a wide range of commercially available metal catalysts. In order to shed some light on this, we carried out electroless deposition of metal nanoparticles on various carbon nanostructures such as amorphous carbon (a-C), carbon nanotubes (CNTs), and nitrogen-doped CNTs (NCNTs) under similar experimental conditions. The main objective is to elucidate the preferable deposition on a particular carbon nanostructure, if any, and understand the underlying mechanism. Experimental results unveil preferred electroless deposition of metal nanoparticles on a-C over CNTs and NCNTs. Notably, the deposition is nicely correlated with the position of the Fermi level (E_F) with respect to the Mⁿ⁺ ↔ M⁰ redox level (E₀). Remarkably, E_F is found to be in the following order NCNT > CNT > a-C and the smaller gap (E₀-E_F) favors the faster electron transfer, resulting in the preferential reduction of Mⁿ⁺, yielding finer nanoparticles on a-C. We believe that this approach can pave the way for designing noble metal-based carbon nanocomposites for a variety of applications, ranging from environmental redemption to electrochemical energy harvesting. As case studies, we have explored the nanocomposites for various catalytic activities and found them to be very competent with recently reported various state-of-the-art electrocatalysts and their commercial counterparts.

Efficient antimony removal by self-assembled core-shell nanocomposite of Co3O4@rGO and the analysis of its adsorption mechanism

Co₃O₄@rGO were facilely prepared by template free self-assemble in this study. The morphology of Co₃O₄@rGO was actiniaria-like core-shell structural nanocomposites. The formation mechanism of Co₃O₄@rGO core-shell nanocomposite was discussed according to its significant time-dependent morphology evolution course. To evaluate the application potential of Co₃O₄@rGO, its adsorption performance toward highly toxic antimony ions were studied. The Co₃O₄@rGO nanocomposite exhibit high anti-interference ability and high adsorption ability. The maximum adsorption capacities towards Sb(III) and Sb(V) are 151.04 and 165.51 mg/g, respectively. River water samples containing antimony violating the limit were used to evaluate the practical application of Co₃O₄@rGO, and high performance was achieved. The EU and China limits for antimony in drinking water can be met by using mesoporous Co₃O₄@rGO treating the actual river water samples with original antimony concentration lower than 50 μg/L. Adsorption isotherm, adsorption kinetics, pH and co-existing ions effects were also studied in details. The results indicate that mesoporous Co₃O₄@rGO is an excellent adsorbent for antimony removal. Mesoporous Co₃O₄@rGO nanocomposite is a potential candidate for antimony removal from waste water.

Triple-nanostructuring-based noninvasive electro-immune sensing of CagA toxin for Helicobacter pylori detection

BACKGROUND

Helicobacter pylori (H pylori) is gram-negative, spiral, and microaerophilic bacteria which can survive in ~2%-10% oxygen level. It was reported to populate in human gastric mucosa and leads to gastric cancer without any age or gender difference.

MATERIALS AND METHODS

In this study, we are targeting label-free electrochemical immunosensor development for rapid H pylori detection after covalently immobilizing the antibody (CagA) over the nanomaterials modified Au electrode. Titanium oxide nanoparticles (TiO₂ NPs), carboxylated multi-walled carbon nanotubes (c-MWCNT), and conducting polymer polyindole carboxylic acid (Pin5COOH) composites (TiO₂ NPs/c-MWCNT/Pin5COOH) were synthesized and further utilized in immunosensor development as an electrochemical interface onto Au electrode. The stepwise modifications of CagAantibody/TiO₂ NPs/c-MWNCT/Pin5COOH/Au electrode were electrochemically studied.

RESULTS

Possessing the unique features of advanced materials, the proposed immunosensor reported low sensing limit of 0.1 ng/mL in dynamic linear range of 0.1-8.0 ng/mL with higher stability and reproducibility. Furthermore, developed sensor-based determination of H pylori in five human stool specimens has shown good results with suitable accuracy.

CONCLUSIONS

This work lays strong foundation toward developing nanotechnology-enabled electrochemical sensor for ultrasensitive and early detection of H pylori in noninvasively collected clinical samples.

Advances and Challenges in Developing Efficient Graphene Oxide-Based ZnO Photocatalysts for Dye Photo-Oxidation

The efficient remediation of organic dyes from wastewater is increasingly valuable in water treatment technology, largely owing to the tons of hazardous chemicals currently and constantly released into rivers and seas from various industries, including the paper, pharmaceutical, textile, and dye production industries. Using solar energy as an inexhaustible source, photocatalysis ranks among the most promising wastewater treatment techniques for eliminating persistent organic pollutants and new emerging contaminants. In that context, developing efficient photocatalysts using sunlight irradiation and effectively integrating them into reactors, however, pose major challenges in the technologically relevant application of photocatalysts. As a potential solution, graphene oxide (GO)-based zinc oxide (ZnO) nanocomposites may be used together with different components (i.e., ZnO and GO-based materials) to overcome the drawbacks of ZnO photocatalysts. Indeed, mounting evidence suggests that using GO-based ZnO nanocomposites can promote light absorption, charge separation, charge transportation, and photo-oxidation of dyes. Despite such advances, viable, low-cost GO-based ZnO nanocomposite photocatalysts with sufficient efficiency, stability, and photostability remain to be developed, especially ones that can be integrated into photocatalytic reactors. This article offers a concise overview of state-of-the-art GO-based ZnO nanocomposites and the principal challenges in developing them.

Adsorption of antimonite and antimonate from aqueous solution using modified polyacrylonitrile with an ultrahigh percentage of amidoxime groups

Porous modified polyacrylonitrile (PAN) with an ultrahigh percentage of amidoxime groups (UAPAN) was synthesized for the first time and used to adsorb antimonite (Sb(III)) and antimonate (Sb(V)) from aqueous solution. Fourier transform infrared (FT-IR), Zeta potential, X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) were adopted to characterize UAPAN and explore adsorption mechanism. Moreover, batch experiments were performed to investigate the influence of various adsorption parameters, including initial pH, contact time, temperature, coexisting ions and reusability on adsorption capacities. Results showed that the maximum adsorption capacities for Sb(III) and Sb(V) were 125.4 and 177.3 mg g^-1, respectively, which were much higher than those of other adsorbents reported in literature. The adsorption thermodynamics was evaluated, indicating the spontaneous and endothermic adsorption. The adsorption isotherm was suitable to be modeled by Langmuir isotherm (R² > 0.96). Results of FT-IR, Zeta potential and XPS indicated that adsorption was involved with electric charge attraction and ligand exchange. DFT further explained that better adsorption of Sb(V) on UAPAN than that of Sb(III) was caused by the higher adsorption energy, more favorable bond lengths and atom charge density. Accordingly, UAPAN is expected to be a compelling candidate for antimony decontamination from aqueous environment.

Synergism of transition metal (Co, Ni, Fe, Mn) nanoparticles and "active support" Fe3O4@C for catalytic reduction of 4-nitrophenol

Research reports, up to date, on supports for non-noble metal catalyst focus mainly on tuning their surface functionality and increasing surface area to maximize metal loading for high catalytic reduction of 4-nitrophenol. However, the "passive" role of these supports leads to inefficient hydride formation on the metal surface which limits catalytic activity. Herein, we present Fe₃O₄@porous-conductive carbon (Fe₃O₄@C-A) core-shell structure as an "active" support for non-noble metals (M = Co, Ni, Fe, and Mn) nanoparticles. Fe₃O₄@C-A was prepared by annealing Fe₃O₄@dense-carbon (Fe₃O₄@C) under N₂. The resultant M-Fe₃O₄@C-A catalysts show high catalytic performance at very low metal loading, while non-noble metals supported on a "passive" support (Fe₃O₄@C) shows very low activity even at high metal loading. The significant difference in catalytic activity is ascribed to the synergistic effect amongst Fe₃O₄, conductive carbon and metal nanoparticles which leads to efficient hydride formation. Amongst the prepared catalysts, Ni-Fe₃O₄@C-A and Co-Fe₃O₄@C-A show the best catalytic activity, completing 4-nitrophenol reduction within 50 s and 80 s, respectively, in the presence of NaBH₄. This result is comparable with previously reported noble-metal-based nanocomposites. In addition, Co-Fe₃O₄@C-A shows high recyclability in 5 consecutive catalytic reactions. In the broader context, our finding highlights how an "active support" together with non-noble metals can provide an efficient mechanism for hydride formation, subsequently accelerating the catalytic reduction of 4-nitrophenol.

Mechanism and impact of synthesis conditions on the one-step green synthesis of hybrid RGO@Fe/Pd nanoparticles

While a one-step green synthesis of a hybrid material composed of reduced graphene oxide and bimetallic Fe/Pd nanoparticles (RGO@Fe/Pd NPs) was previously successfully reported and evaluated for the removal of organic contaminants, the relationship between the formation of RGO@Fe/Pd and the resulting reactivity was unclear. In this paper the impact of the specific synthetic conditions on the reactivity of RGO@Fe/Pd was investigated in order to enhance the removal efficiency of antibiotics such as rifampicin. The hybrid material (RGO@Fe/Pd) successfully removed 96.1% of rifampicin compared to only 63.5 and 81.0% for Fe nanoparticles and RGO, respectively. The best synthetic conditions for the formation of RGO@Fe/Pd included GO/Fe = 1:1 and Fe/Pd = 100: 5. In addition, GC-MS and FTIR were used to identify the main reducing biomolecules in the green tea extract responsible for the one-step synthesis of RGO@Fe/Pd as Catechol, Caffeine, 1,3,5-Benzenetriol. The morphology, size and surface composition of RGO@Fe/Pd was characterized by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-Ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). These advanced characterization techniques suggested that during synthesis GO was initially converted to RGO, and thereafter Fe/Pd NPs (10-50 nm) were dispersed on RGO. Finally, a plausible formation mechanism for the one-step synthesis of the hybrid material was proposed.

Graphene oxide nanocomposite magnetic microbeads for the remediation of positively charged aromatic compounds

Integrating graphene as an inorganic nanostructure within a hydrogel matrix enables the creation of a unique hybrid composite combining the peculiar chemical and physical properties of graphene with the high porosity and stability of hydrogels as for example agarose gel. As a consequence, the resulting material forms a double-network system providing advantages deriving from both the components. In this study, we present the synthesis of novel magnetic porous agarose-based graphene oxide microbeads for the adsorption and separation of positively charged aromatic molecules. The hydrogel-based graphene oxide beads revealed an ultrafast adsorption kinetics for positively charged aromatic dyes. We tested this material for the purification of fluorescent-tagged biomolecules. In addition, reduced graphene oxide microbeads were decorated with palladium nanoparticles, showing a high catalytic activity towards the reduction of dyes by sodium borohydride. Our results show that magnetic agarose based graphene microbeads with enhanced physical-chemical properties can be used for several biochemical applications.

Fabrication of redox-active polyoxometalate-based ionic crystals onto single-walled carbon nanotubes as high-performance anode materials for lithium-ion batteries

Polyoxometalate-based ionic crystals were fabricated onto single-walled carbon nanotubes as anode materials for lithium-ion batteries with high specific capacity and excellent cycling stability.

Highly Active Core-Shell Carbon/NiCo2 O4 Double Microtubes for Efficient Oxygen Evolution Reaction: Ultralow Overpotential and Superior Cycling Stability

Developing highly efficient electrocatalysts with earth abundant elements for oxygen evolution reaction (OER) is a promising way to store light or electrical energy in the form of chemical energy. Here, a new type of electrocatalyst with core-shell carbon/NiCo₂ O₄ double microtubes architecture is successfully synthesized through a hydrothermal method combined with the calcination process with wet tissues as the template and carbon resource. The outer NiCo₂ O₄ nanosheet arrays contain abundant defects, which come from reduction of the carbon in wet tissues. This indicates that carbon is a very excellent defect inducer. The inner carbon microtubes can act as the robust structure skeleton and these core-shell double microtubes provide abundant diffusion channels for oxygen and electrolyte, both of which contribute to improving the stability by avoiding damage to the electrode from produced O₂ bubbles and the collapse of the outer NiCo₂ O₄ microtubes. Electrochemical results show that the electrode, core-shell carbon/NiCo₂ O₄ double microtubes loaded on carbon cloth, exhibits prominent electrocatalytic activity with an overpotential of only 168 mV at 10 mA cm^-2 and a Tafel slope as low as 57.6 mV dec^-1 in 1.0 mol L^-1 KOH. This new type of electrocatalyst possesses great potential in water electrolyzers and rechargeable metal-air batteries.

Simultaneous growth of three-dimensional carbon nanotubes and ultrathin graphite networks on copper

A new way to simultaneously grow carbon nanotubes (CNTs) and ultrathin graphite on copper (Cu) foils has been investigated. This one-step growth process yields three-dimensional networks of CNTs on graphitic layers (3D CNTs/G) on Cu foils. Their synthesis conditions and growth mechanism are discussed in detail taking their structural properties into account. Individual CNTs and the 3D CNTs/G networks by means of an in-situ conductive atomic force microscope inside a scanning electron microscope are electrically characterized. Time-resolved photoluminescence demonstrated fast charge transfer and high carrier collection efficiency superior to two-dimensional ultrathin graphite only. Their facile and tunable growth and excellent electrical properties show that the 3D CNTs/G are strongly attractive for various applications such as solar cells, sensors, supercapacitors, photovoltaics, power generation, and optoelectronics.

Biomimetic Turbinate-like Artificial Nose for Hydrogen Detection Based on 3D Porous Laser-Induced Graphene

Inspired by the turbinate structure in the olfaction system of a dog, a biomimetic artificial nose based on 3D porous laser-induced graphene (LIG) decorated with palladium (Pd) nanoparticles (NPs) has been developed for room-temperature hydrogen (H₂) detection. A 3D porous biomimetic turbinate-like network of graphene was synthesized by simply irradiating an infrared laser beam onto a polyimide substrate, which could further be transferred onto another flexible substrate such as polyethylene terephthalate (PET) to broaden its application. The sensing mechanism is based on the catalytic effect of the Pd NPs on the crystal defect of the biomimetic LIG turbinate-like microstructure, which allows facile adsorption and desorption of the nonpolar H₂ molecules. The sensor demonstrated an approximately linear sensing response to H₂ concentration. Compared to chemical vapor-deposited (CVD) graphene-based gas sensors, the biomimetic turbinate-like microstructure LIG-gas sensor showed ∼1 time higher sensing performance with much simpler and lower-cost fabrication. Furthermore, to expand the potential applications of the biomimetic sensor, we modulated the resistance of the biomimetic LIG sensor by varying laser sweeping gaps and also demonstrated a well-transferred LIG layer onto transparent substrates. Moreover, the LIG sensor showed good mechanical flexibility and robustness for potential wearable and flexible device applications.

Nanotoxicity of different sizes of graphene (G) and graphene oxide (GO) in vitro and in vivo

Graphene family nanomaterials (GFNs) have attracted significant attention due to their unique characteristics and applications in the fields of biomedicine and nanotechnology. However, previous studies highlighted the in vitro and in vivo toxicity of GFNs with size and oxidation state differences are still elusive. Therefore, we prepared graphene (G) and graphene oxide (GO) of three different sizes (S-small, M-medium, and L-large), and characterized them using multiple surface-sensitive analytical techniques. In vitro assays using HEK 293T cells revealed that the small and large sizes of G and GO significantly reduced the cell viability and increased DNA damage, accompanying with activated reactive oxygen species (ROS) generation and induced various expressions of associated critical genetic markers. Moreover, the bacterial assays highlighted that G and GO caused strong acute toxicity on Tox2 bacteria. Effects of G were higher than GO and showed size dependent effect: L > M > S, while the medium size of GO induced mild genetic toxicity on RecA bacteria. In vivo assays revealed that exposure to G and GO caused the developmental toxicity, induced ROS generation, and activated related pathways (specifically GO) in zebrafish. Taken together, G showed stronger ability to decrease the survival rate and induce the acute toxicity, while GO showed obvious toxicity in terms of DNA damages, ROS generation, and abnormal gene expressions. Our findings highlighted that G and GO differentially induced toxicity based on their varying physical characteristics, especially sizes and oxidation state, and exposure concentrations and sensitivity of the employed in vitro and in vivo models. In short, this study provided deep insights on the negative effects of GFNs exposure.

Three-Dimensional Graphene Composite Containing Graphene-SiO₂ Nanoballs and Its Potential Application in Stress Sensors

Combining functional nanomaterials composite with three-dimensional graphene (3DG) is a promising strategy for improving the properties of stress sensors. However, it is difficult to realize stress sensors with both a wide measurement range and a high sensitivity. In this paper, graphene-SiO₂ balls (GSB) were composed into 3DG in order to solve this problem. In detail, the GSB were prepared by chemical vapor deposition (CVD) method, and then were dispersed with graphene oxide (GO) solution to synthesize GSB-combined 3DG composite foam (GSBF) through one-step hydrothermal reduction self-assembly method. The prepared GSBF owes excellent mechanical (95% recoverable strain) and electrical conductivity (0.458 S/cm). Furthermore, it exhibits a broad sensing range (0⁻10 kPa) and ultrahigh sensitivity (0.14 kPa^-1). In addition, the water droplet experiment demonstrates that GSBF is a competitive candidate of high-performance materials for stress sensors.

Facile Synthesis of Mesoporous Carbon Spheres Using 3D Cubic Fe-KIT-6 by CVD Technique for the Application of Active Electrode Materials in Supercapacitors

Mesoporous carbon spheres (MCS-750, MCS-800, MCS-850, MCS-900, and MCS-950) have been synthesized by a facile strategy with low temperature and rapid chemical vapor deposition technique. The synthesized MCS possess relatively large surface area (570-670 m² g^-1), good graphitization, remarkable porosity, and redox functionalities on the surface of the synthesized MCS. Combination of these structural and surface properties of the synthesized MCS as an electrode material (MCS-850) showed an excellent charge-storage capacity with a specific capacitance of 338 F/g at 1 mV/s, 217 F/g at 0.5 A/g. MCS-850 shows long-term cycling stability with capacitive retention of more than 96% after 2000 cycles in 6 M KOH electrolyte. In addition, a fabricated two-electrode symmetric cell obtained 86% retention after 2000 cycles. The two-electrode symmetric device exhibited a specific capacitance of 63 F/g at 5 mV/s with an energy density of 7.1 Wh/kg.

Ultra-fine Pd nanoparticles confined in a porous organic polymer: A leaching-and-aggregation-resistant catalyst for the efficient reduction of nitroarenes by NaBH4

Porous organic polymers (POPs) containing nitrogenous substituents have potential practical applications as heterogeneous catalysts based upon controlled porous structure and surface-anchored noble metal nanoparticles (NMNPs). In this work we prepared a POP material from piperazine and cyanuric chloride starting materials (PC-POP). The PC-POP material contains numerous triazinyl moieties, thus rendering the pores hydrophobic. Subsequently, by means of a novel reverse double-solvent approach (RDSA), microdroplets of Pd(AcO)₂/CH₂Cl₂ were introduced into the hydrophobic pores of PC-POP in an aqueous environment; Pd(II) was rapidly reduced by NaBH₄ to form ultra-fine Pd NPs and confined within the pores of PC-POP at high dispersity. The extensive porosity and dispersity of the Pd NPs made the active sites readily accessible, and led to efficient mass transfer. Thus, Pd@PC-POP exhibits superior catalytic performance in catalytic reduction of various nitroarenes. Furthermore, Pd@PC-POP has excellent recyclability, without significant loss of activity nor leaching of Pd active sites during 10 successive reaction cycles. This work points to a practical and cost-effective approach to preparation of POP materials, and also for confining ultra-fine NMNPs in POPs for use as catalysts.

Palladium nanoparticle functionalized graphene xerogel for catalytic dye reduction

We report a method to synthesize a palladium-functionalized porous graphene xerogel structure. A graphene xerogel nanocomposite with a three-dimensional microstructure was obtained by chemical reduction of an aqueous dispersion of graphene oxide at mild temperature. After the graphene hydrogel has been placed in a K2PdCl4 solution, the spontaneous redox reaction between the reduced graphene and Pd2+ takes place, leading to the formation of nanohybrid materials consisting of a graphene porous matrix decorated with Pd nanoparticles. The final porosity of the material was tuned through drying the graphene hydrogel by solvent evaporation. The palladium functionalized porous graphene xerogels were successfully used for the catalytic reduction of Rhodamine 6G.

Catalytically Active Bacterial Nanocellulose-Based Ultrafiltration Membrane

Large quantities of highly toxic organic dyes in industrial wastewater is a persistent challenge in wastewater treatment processes. Here, for highly efficient wastewater treatment, a novel membrane based on bacterial nanocellulose (BNC) loaded with graphene oxide (GO) and palladium (Pd) nanoparticles is demonstrated. This Pd/GO/BNC membrane is realized through the in situ incorporation of GO flakes into BNC matrix during its growth followed by the in situ formation of palladium nanoparticles. The Pd/GO/BNC membrane exhibits highly efficient methylene orange (MO) degradation during filtration (up to 99.3% over a wide range of MO concentrations, pH, and multiple cycles of reuse). Multiple contaminants (a cocktail of 4-nitrophenol, methylene blue, and rhodamine 6G) can also be effectively treated by Pd/GO/BNC membrane simultaneously during filtration. Furthermore, the Pd/GO/BNC membrane demonstrates stable flux (33.1 L m^-2 h^-1 ) under 58 psi over long duration. The novel and robust membrane demonstrated here is highly scalable and holds a great promise for wastewater treatment.