Experimental and theoretical demonstrations for the mechanism behind enhanced microbial electron transfer by CNT network

Single-walled Carbon Nanotubes Wrapped with Charged Polysaccharides Enhance Extracellular Electron Transfer

Microbial electrochemical systems (MESs) rely on the microbes' ability to transfer charges from their anaerobic respiratory processes to electrodes through extracellular electron transfer (EET). To increase the generally low output signal in devices, advanced bioelectrical interfaces tend to augment this problem by attaching conducting nanoparticles, such as positively charged multiwalled carbon nanotubes (CNTs), to the base carbon electrode to electrostatically attract the negatively charged bacterial cell membrane. On the other hand, some reports point to the importance of the magnitude of the surface charge of functionalized single-walled CNTs (SWCNTs) as well as the size of functional groups for interaction with the cell membrane, rather than their polarity. To shed light on these phenomena, in this study, we prepared and characterized well-solubilized aqueous dispersions of SWCNTs functionalized by either positively or negatively charged cellulose-derivative polymers, as well as with positively charged or neutral small molecular surfactants, and tested the electrochemical performance of Shewanella oneidensis MR-1 in MESs in the presence of these functionalized SWCNTs. By simple injection into the MESs, the positively charged polymeric SWCNTs attached to the base carbon felt (CF) electrode, and as fluorescence microscopy revealed, allowed bacteria to attach to these structures. As a result, EET currents continuously increased over several days of monitoring, without bacterial growth in the electrolyte. Negatively charged polymeric SWCNTs also resulted in continuously increasing EET currents and a large number of bacteria on CF, although SWCNTs did not attach to CF. In contrast, SWCNTs functionalized by small-sized surfactants led to a decrease in both currents and the amount of bacteria in the solution, presumably due to the detachment of surfactants from SWCNTs and their detrimental interaction with cells. We expect our results will help researchers in designing materials for smart bioelectrical interfaces for low-scale microbial energy harvesting, sensing, and energy conversion applications.

Self-assembled electrochemically active biofilms doped with carbon nanotubes: Electron exchange efficiency and cytotoxicity evaluation

Thick electrochemically active biofilms (EABs) will lead to insufficient extracellular electron transfer (EET) rate because of the limitation of both substrate diffusion and electron exchange. Herein, carbon nanotubes (CNTs)-doped EABs are developed through self-assembly. The highly conductive biofilms (internal resistance of ∼211 Ω) are efficiently enriched at CNTs dosage of 1 g L-1, with the stable power output of 0.568 W m-2 over three months. The embedded CNTs can act as electron tunnel to accelerate the EET rate in thick biofilm. Self-charging/discharging experiments and Nernst-Monod model stimulation demonstrate a higher net charge storage capacity (0.15 C m-2) and more negative half-saturation potential (-0.401 V) for the hybrid biofilms than that of the control (0.09 C m-2, and -0.378 V). Enzyme activity tests and the observation of confocal laser scanning microscopy by live/dead staining show a nearly negligible cytotoxicity of CNTs, and non-targeted metabonomics analysis reveals fourteen differential metabolites that do not play key roles in microbial central metabolic pathways according to KEGG compound database. The abundance of typical exoelectrogens Geobacter sp. is 2-fold of the control, resulting in a better bioelectrocatalytic activity. These finding provide a possible approach to prolong electron exchange and power output by developing a hybrid EABs doped with conductive material.

Living electrochemical biosensing: Engineered electroactive bacteria for biosensor development and the emerging trends

Bioelectrical interfaces made of living electroactive bacteria (EAB) provide a unique opportunity to bridge biotic and abiotic systems, enabling the reprogramming of electrochemical biosensing. To develop these biosensors, principles from synthetic biology and electrode materials are being combined to engineer EAB as dynamic and responsive transducers with emerging, programmable functionalities. This review discusses the bioengineering of EAB to design active sensing parts and electrically connective interfaces on electrodes, which can be applied to construct smart electrochemical biosensors. In detail, by revisiting the electron transfer mechanism of electroactive microorganisms, engineering strategies of EAB cells for biotargets recognition, sensing circuit construction, and electrical signal routing, engineered EAB have demonstrated impressive capabilities in designing active sensing elements and developing electrically conductive interfaces on electrodes. Thus, integration of engineered EAB into electrochemical biosensors presents a promising avenue for advancing bioelectronics research. These hybridized systems equipped with engineered EAB can promote the field of electrochemical biosensing, with applications in environmental monitoring, health monitoring, green manufacturing, and other analytical fields. Finally, this review considers the prospects and challenges of the development of EAB-based electrochemical biosensors, identifying potential future applications.

Tailoring Surface Properties of Electrodes for Synchronous Enhanced Extracellular Electron Transfer and Enriched Exoelectrogens in Microbial Fuel Cells

An extracellular electron transfer (EET) process between an electroactive biofilm and an electrode is a crucial step for the performance of microbial fuel cells (MFCs), which is highly related to the enrichment of exoelectrogens and the electrocatalytic activity of the electrode. Herein, an efficient N- and Fe-abundant carbon cloth (CC) electrode with the comodification of iron porphyrin (FePor) and polyquaternium-7 (PQ) was synthesized using a facile solvent evaporation and immersion method and developed as an anode (named FePor-PQ) in MFCs. The surface structural characterizations confirmed the successful introduction of N and Fe atoms, whereas FePor-PQ achieved the N content of 9.59 at %, which may offer various active sites for EET. The introduction of PQ contributed to improving the surface hydrophilicity, providing the composite electrode good biocompatibility for bacterial attachment and colonization as well as substrate diffusion. Based on the advantages, the MFC with the FePor-PQ anode produced a maximum power density of 2165.7 mW m^-2, strikingly higher than those of CC (1124.0 mW m^-2), PQ (1668.8 mW m^-2), and FePor (1978.9 mW m^-2). Furthermore, with the EET mediated by the binding of flavins and c-type cytochromes on the outer membrane was enhanced prominently, the typical exoelectrogen Geobacter was enriched up to 55.84% in the FePor-PQ anode biofilm. This work reveals a synergistic effect from heteroatom coating and surface properties tailoring to boost both the EET efficiency and exoelectrogen enrichment for enhancing MFC performance, which also provides valuable insights for designing electrodes in other bio-electrochemical systems.

Improving the anode performance of microbial fuel cell with carbon nanotubes supported cobalt phosphate catalyst

Microbial fuel cell (MFC) is a sustainable technology that can convert waste to energy by harnessing the power of exoelectrogenic bacteria. However, the poor biocompatibility and low electrocatalytic activities of surface usually cause weak bacterial adhesion and low electron transfer efficiency, which seriously hampers the development of MFCs. Herein, a novel carbon nanotube supported cobalt phosphate (CNT/Co-Pi) electrode is fabricated by assembling CNTs on carbon cloth, followed by the electrodeposition of Co-Pi catalyst. The deposited amorphous Co-Pi thin film contains phosphate and the cobalt ions of multiple oxidation states. The hydrophilic phosphate can promote the adhesion of microorganisms on electrode. The strong conversion ability of multiple states of cobalt offers excellent electrocatalytic activity for the electron transfer across biotic/abiotic interface. Therefore, the highly conductive CNTs substrate, along with the Co-Pi catalyst, provide an effective electron transfer between the electrogenic bacteria and the electrode, which endows MFC high power densities up to 1200 mW m^-2. Our work has demonstrated for the first time that CNT/Co-Pi catalyst can promote the interfacial electron transfer between electrogenic bacteria and electrode, and highlighted the application potentials of Co-Pi as an anode catalyst for the fabrication of high performance MFC anodes.

Carbon nanotubes mediating nano α-FeOOH reduction by Shewanella putrefaciens CN32 to enhance tetrabromobisphenol A removal

Carbon nanotubes (CNTs) mediation of the reduction of nano goethite (α-FeOOH) by Shewanella putrefaciens CN32 to improve the removal efficiency of tetrabromobisphenol A (TBBPA) was investigated in this study. The results showed that CNTs effectively promoted the biological reduction of α-FeOOH by strengthening the electron transfer process between Shewanella putrefaciens CN32 and α-FeOOH. After α-FeOOH was reduced to Fe(II), the adsorbed Fe(II) accounted for approximately 69.07% of the total Fe(II). And the secondary mineral vivianite was formed during the reduction of α-FeOOH, which was determined by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The vivianite (Fe^II₃(PO₄)₂·8H₂O) was formed by the reaction of PO₄^3- and Fe(II). The degradation effect of TBBPA was the best at pH 8. CNT-α-FeOOH reduced the toxicity of TBBPA to CN32 and had good stability and reusability. The byproduct bisphenol A was detected which indicated that the degradation pathway of TBBPA involved reductive debromination. Electrochemical experiments and EPR analysis showed that the electron transfer capacities (ETC) of CNTs was an important factor in the removal of TBBPA, and it may greatly depend on semiquinone radicals (CO). This study provided a new method and theoretical support for the removal of TBBPA in the environment.

Extracellular Electron Shuttling Mediated by Soluble c-Type Cytochromes Produced by Shewanella oneidensis MR-1

How metal-reducing bacteria transfer electrons during dissimilatory energy generation under electron acceptor-limited conditions is poorly understood. Here, we incubated the iron and manganese-reducing bacterium Shewanella oneidensis MR-1 without electron acceptors. Removal of soluble extracellular organic compounds (EOCs) dramatically retarded transfer of electrons to an experimental electron acceptor, Cr(VI), by MR-1. However, the return of either high MW (>3000 Da) or low MW (<3000 Da) soluble EOCs produced by MR-1 to washed cells restored Cr(VI) reduction though Cr(VI) reduction was fastest when both size fractions were added together. Spectral and electrochemical characterization of EOCs indicated the presence of flavins and c-type cytochromes (c-Cyts). A model of the kinetics of individual elementary reactions between cells, flavins, released c-Cyts, and Cr(VI), including the direct reduction of flavins, released c-Cyts, and Cr(VI) by cells and the indirect reduction of Cr(VI) by reduced forms of flavins and released c-Cyts, was developed. Model results suggest that released c-Cyts could act as electron mediators to accelerate electron transfer from cells to Cr(VI), and the relative contribution of this pathway was higher than that mediated by flavins. Hence, extracellular c-Cyts produced by MR-1 likely play a role in extracellular electron transfer under electron acceptor-limited conditions. These findings provide new insights into extracellular electron shuttling and the metabolic strategy of metal-reducing bacteria under electron acceptor-limited conditions.

Active N dopant states of electrodes regulate extracellular electron transfer of Shewanella oneidensis MR-1 for bioelectricity generation: Experimental and theoretical investigations

Anodic N doping is an effective way to improve power generation of bioelectrochemical systems (BESs), but the role of various active N dopant states of the anode on BES performance is still unclear. Herein, the effect of anodic active N dopant states on bioelectricity generation of Shewanella oneidensis MR-1 inoculated BESs particularly including microbial extracellular electron transfer (EET) was explored using experiments and theoretical simulations. It was found a positive linear correlation between the peak current density of BESs and pyrrolic N content of the anode, which would mainly ascribe to the enhancement of both direct electron transfer (DET) and mediated electron transfer (MET) of S. oneidensis MR-1. Morever, the molecule dynamic simulation revealed that such EET improvements of S. oneidensis MR-1 could be due to more remarkable reduction in the thermodynamic and kinetic resistances of the DET and MET processes with anodic doping of pyrrolic N compared to pyridinic N and graphitic N. This work provides a valuable guideline to design of high-performance anodes for potential BES applications.

Electrochemical preparation and application of PANI/MWNT and PPy/MWNT composite anodes for anaerobic fluidized bed microbial fuel cell

Polyaniline (PANI)/multi-walled carbon nanotubes (MWNT) and polypyrrole (PPy)/MWNT composite anodes were first prepared using electrochemical cyclic voltammetry (CV) method. FTIR and SEM spectra proved that PPy/MWNT and PANI/MWNT were successfully modified on graphite rods, meanwhile, the modified mechanism was also investigated. EIS tests indicated that the Rct values for unmodified anode, PANI/MWNT anode and PPy/MWNT anode were 226.20, 87.93 and 34.95 Ω, respectively, which meant that PPy/MWNT composite anode possessed best electrical conductivity compared with PANI/MWNT anode and unmodified anode. By using PPy/MWNT and PANI/MWNT modified anodes in AFBMFC, the maximum output power density improved by 65.13% and 45.59% compared to that of PPy anode and PANI anode, respectively. Meanwhile, the COD removal rates for the three anodes followed as PPy/MWNT anode > PANI/MWNT anode > PPy anode > PANI anode > unmodified anode.

Potential-Driven Electron Transfer Lowers the Dissociation Energy of the C-F Bond and Facilitates Reductive Defluorination of Perfluorooctane Sulfonate (PFOS)

The widespread environmental occurrence of per- and polyfluoroalkyl substances (PFAS) has attracted significant regulatory, research, and media attention because of their toxicity, recalcitrance, and ability to bioaccumulate. Perfluorooctane sulfonate (PFOS) is a particularly troublesome member of the PFAS family due to its immunity to biological remediation and radical-based oxidation. In the present study, we present a heterogeneous reductive degradation process that couples direct electron transfer (ET) from surface-modified carbon nanotube electrodes (under low potential conditions) to sorbed PFOS molecules using UV-generated hydrated electrons without any further chemical addition. We demonstrate that the ET process dramatically increases the PFOS defluorination rate while yielding shorter chain (C₃-C₇) perfluorinated acids and present both experimental and ab initio evidence of the synergistic relationship between electron addition to sorbed molecules and their ability to react with reductive hydrated electrons. Because of the low energy consumption associated with the ET process, the use of standard medium-pressure UV lamps and no further chemical addition, this reductive degradation process is a promising method for the destruction of persistent organic pollutants, including PFAS and other recalcitrant halogenated organic compounds.

Performance and microbial protein expression during anaerobic treatment of alkali-decrement wastewater using a strengthened circulation anaerobic reactor

Herein, a strengthened circulation anaerobic (SCA) reactor was employed for the treatment of actual alkali-decrement wastewater. The degradation mechanism of polyester oligomers and the relationship between the treatment performance and microbial community structure were systematically investigated using various advanced techniques. Results suggest that the accumulation of volatile fatty acids has an inhibitory effect on methanogenic activity. Molecular weight distributions suggest that only incomplete degradation of oligomers was achieved, due to acetogenic inhibition in the lower part of the SCA reactor. Meta-proteomic approach analysis revealed that the methanogens containing heterodisulfide reductase were the primary species involved in methane metabolism. Based on these findings, a possible degradation mechanism for alkali-decrement wastewater in the SCA reactor is proposed. This high-performance anaerobic reactor could be further scaled-up and optimized to serve as a promising and effective unit for the treatment of other refractory industrial wastewaters.

Magnetite Triggering Enhanced Direct Interspecies Electron Transfer: A Scavenger for the Blockage of Electron Transfer in Anaerobic Digestion of High-Solids Sewage Sludge

At present, high-solids anaerobic digestion of sewage sludge has drawn great attention due to the superiority of its small land area footprint and low energy consumption. However, a high organic loading rate may cause acids accumulation and ammonia inhibition, thus leading to an inhibited pseudo-steady state in which electron transfer through interspecies hydrogen transfer (IHT) between acetogens and methanogens is blocked. In this study, adding 50 mg/g TS (total solid) magnetite clearly reduced the accumulation of short-chain fatty acids and accelerated methane production by 26.6%. As demonstrated, the individual processes of anaerobic digestion could not be improved by magnetite when methanogenesis was interrupted. Analyzing stable carbon isotopes and investigating the methanogenesis pathways using acetate and H₂/CO₂ as substrates together proved that direct interspecies electron transfer (DIET) was enhanced by magnetite. Metatranscriptomic analysis and determination of key enzymes showed that IHT could be partially substituted by enhanced DIET, and acetate-dependent methanogenesis was improved after the blockage of electron transfer was scavenged. Additionally, the expression of both pili and c-type cytochromes was found to decrease, indicating that magnetite could replace their roles for efficient electron transfer between acetogens and methanogens; thus, a robust chain of electron transfer was established.

Dual-Function Electrocatalytic and Macroporous Hollow-Fiber Cathode for Converting Waste Streams to Valuable Resources Using Microbial Electrochemical Systems

Dual-function electrocatalytic and macroporous hollow-fiber cathodes are recently proposed as promising advanced material for maximizing the conversion of waste streams such as wastewater and waste CO₂ to valuable resources (e.g., clean freshwater, energy, value-added chemicals) in microbial electrochemical systems. The first part of this progress report reviews recent developments in this type of cathode architecture for the simultaneous recovery of clean freshwater and energy from wastewater. Critical insights are provided on suitable materials for fabricating these cathodes, as well as addressing some challenges in the fabrication process with proposed strategies to overcome them. The second and complementary part of the progress report highlights how the unique features of this cathode architecture can solve one of the intrinsic bottlenecks (gas-liquid mass transfer limitation) in the application of microbial electrochemical systems for CO₂ reduction to value-added products. Strategies to further improve the availability of CO₂ to microbial catalysts on the cathode are proposed. The importance of understanding microbe-cathode interactions, as well as electron transfer mechanisms at the cathode-cell and cell-cell interface to better design dual-function macroporous hollow-fiber cathodes, is critically discussed with insights on how the choice of material is important in facilitating direct electron transfer versus mediated electron transfer.

Shewanella putrefaciens CN32 outer membrane cytochromes MtrC and UndA reduce electron shuttles to produce electricity in microbial fuel cells

The extracellular electron transfer (EET) process of Shewanella species is believed to be indispensable for their anaerobic respiration with an electrode. However, the function of outer membrane c-type cytochromes (OM c-Cyts, the primary components of the EET pathway) is still controversial. In this study, we investigated the effect of two OM c-Cyts (MtrC and UndA) of Shewanella putrefaciens CN32 with respect to electricity production and anodic EET efficiency. Deletion of the mtrC gene severely prolonged the microbial fuel cell (MFC) start-up time and decreased electricity production due to depressed flavin-mediated electron transfer, whereas deletion of the undA gene did not have a significant impact. Strikingly, the depression of EET by the deletion of mtrC could be partially relieved by acclimation, which might be due to an increase in the transmembrane transport of electron shuttles and/or the activation of other redox proteins. These results suggested that MtrC may be the primary reductase of flavins to ensure fast indirect EET, which plays a crucial role in MFC electricity generation.

A decahaem cytochrome as an electron conduit in protein-enzyme redox processes

The decahaem cytochrome MtrC from Shewanella oneidensis MR-1 was employed as a protein electron conduit between a porous indium tin oxide electrode and redox enzymes. Using a hydrogenase and a fumarate reductase, MtrC was shown as a suitable and efficient diode to shuttle electrons to and from the electrode with the MtrC redox activity regulating the direction of the enzymatic reactions.

Corrugated stainless-steel mesh as a simple engineerable electrode module in bio-electrochemical system: Hydrodynamics and the effects on decolorization performance

The application of bio-electrochemical system (BESs) is strongly depended on the development of the engineering applicable electrode. Here we described an economical and readily processable electrode module with three-dimensional structure, the corrugated stainless-steel mesh electrode module (c-SMEM). This novel developed electrode module was demonstrated to provide a good hydrodynamic characteristic and significantly enhanced the decolorization performance of the BES when serving for treating azo dye (acid orange 7, AO7) containing wastewater. Compared to the conventional planar electrodes module (p-SMEM), c-SMEM was found to prolong the mean residence time (MRT_θ) of AO7 and change the flow pattern closer to the plug flow. As a result, the maximum enhancement of the volumetric decolorization rate (vDR) can reach to 255%, even when the c-SMEM and p-SMEM have the same electrode surface area. In addition, a techno-economic analysis model was established to elucidated the effects of the decolorization performance and the material cost on the initial capital cost, which revealed the BES with c-SMEM could be economically comparable to or even better than the traditional bio-decolorization technologies. These results suggest c-SMEM holds great potential for engineering application, which may help paving the way of applying BES at large-scale.

The role of conductive materials in the start-up period of thermophilic anaerobic system

The major obstacle for thermophilic anaerobic digestion (TAD) is the inhibited microorganism activity and process instability during the start-up period. This study proposed a strategy to accelerate and stabilize the thermophilic reactors start-up via adding conductive materials. The results show that methane production rate in conductive materials supplemented (CMS) reactors was almost two times higher than the control reactors. Caloramator sp., a candidate of electroactive bacteria, was significantly enriched in the carbon nano-tube (CNT) supplemented groups (12.89%) as compared to control groups (1.26% only). Together with the doubled abundance of Methanosaeta and Methanosarcina methanogens in CMS groups, it is highly possible Caloramator sp. and Methanosaeta/Methanosarcina have established syntrophic direct interspecies electron transfer (DIET), via adopting conductive materials as electron conduit. Microbial community analysis indicates DIET was likely to be an unstable condition triggered syntrophic process. This study demonstrated that conductive materials could promote microbial activity and shorten start-up period for thermophilic anaerobic system.

Nanotechnology to rescue bacterial bidirectional extracellular electron transfer in bioelectrochemical systems

Advanced nanostructured electrode materials largely improve the bacterial bidirectional extracellular electron transfer in bioelectrochemical systems.

Employing a Flexible and Low-Cost Polypyrrole Nanotube Membrane as an Anode to Enhance Current Generation in Microbial Fuel Cells

The flexible and low-cost polypyrrole nanotube membrane is demonstrated as a promising anode in microbial fuel cells, which significantly enhances the extracellular electron transfer between Shewanella oneidensis MR-1 and the electrode, owing to the large active surface area and high electrical conductivity.

Influence of anode surface chemistry on microbial fuel cell operation

Self-assembled monolayers (SAMs) modified gold anodes are used in single chamber microbial fuel cells for organic removal and electricity generation. Hydrophilic (N(CH3)3(+), OH, COOH) and hydrophobic (CH3) SAMs are examined for their effect on bacterial attachment, current and power output. The different substratum chemistry affects the community composition of the electrochemically active biofilm formed and thus the current and power output. Of the four SAM-modified anodes tested, N(CH3)3(+) results in the shortest start up time (15 days), highest current achieved (225 μA cm(-2)) and highest MFC power density (40 μW cm(-2)), followed by COOH (150 μA cm(-2) and 37 μW cm(-2)) and OH (83 μA cm(-2) and 27 μW cm(-2)) SAMs. Hydrophobic SAM decreases electrochemically active bacteria attachment and anode performance in comparison to hydrophilic SAMs (CH3 modified anodes 7 μA cm(-2) anodic current and 1.2 μW cm(-2) MFC's power density). A consortium of Clostridia and δ-Proteobacteria is found on all the anode surfaces, suggesting a synergistic cooperation under anodic conditions.