Highly strong and elastic graphene fibres prepared from universal graphene oxide precursors

Superior Strong and Tough Nacre-Inspired Materials by Interlayer Entanglement

Natural materials teach that mechanical dissipative interactions relieve the conflict between strength and toughness and enable fabrication of strong yet tough artificial materials. Replicating natural nacre structure has yielded rich biomimetic materials; however, stronger interlayer dissipation still waits to be exploited to extend the performance limits of artificial nacre materials. Here, we introduce strong entanglement as a new artificial interlayer dissipative mechanism and fabricate entangled nacre materials with superior strength and toughness, across molecular to nanoscale nacre structures. The entangled graphene nacre fibers achieved high strength of 1.2 GPa and toughness of 47 MJ/m³, and films reached 1.5 GPa and 25 MJ/m³. Experiments and simulations reveal that strong entanglement can effectively dissipate interlayer energy to relieve the conflict between strength and toughness, acting as natural folded proteins. The strong interlayer entanglement opens up a new path for designing stronger and tougher artificial materials to mimic but surpass natural materials.

Sensing Organophosphorus Compounds with SWCNT Films

Promising electrical properties of single-walled carbon nanotubes (SWCNTs) open a spectrum of applications for this material. As the SWCNT electronic characteristics respond well to the presence of various analytes, this makes them highly sensitive sensors. In this contribution, selected organophosphorus compounds were detected by studying their impact on the electronic properties of the nanocarbon network. The goal was to untangle the n-doping mechanism behind the beneficial effect of organic phosphine derivatives on the electrical conductivity of SWCNT networks. The highest sensitivity was obtained in the case of the application of 1,6-Bis(diphenylphoshpino)hexane. Consequently, free-standing SWCNT films experienced a four-fold improvement to the electrical conductivity from 272 ± 21 to 1010 ± 44 S/cm and an order of magnitude increase in the power factor. This was ascribed to the beneficial action of electron-rich phenyl moieties linked with a long alkyl chain, making the dopant interact well with SWCNTs.

Electronic Textiles Fabricated with Graphene Oxide-Coated Commercial Textiles

Demand for wearable and portable electronic devices has increased, raising interest in electronic textiles (e-textiles). E-textiles have been produced using various materials including carbon nanotubes, graphene, and graphene oxide. Among the materials in this minireview, we introduce e-textiles fabricated with graphene oxide (GO) coating, using commercial textiles. GO-coated cotton, nylon, polyester, and silk are reported. The GO-coated commercial textiles were reduced chemically and thermally. The maximum e-textile conductivity of about 10 S/cm was achieved in GO-coated silk. We also introduce an e-textile made of uncoated silk. The silk-based e-textiles were obtained using a simple heat treatment with axial tension. The conductivity of the e-textiles was over 100 S/cm.

Self-Planarization of High-Performance Graphene Liquid Crystalline Fibers by Hydration

Graphene fibers (GFs) are promising elements for flexible conductors and energy storage devices, while translating the extraordinary properties of individual graphene sheets into the macroscopically assembled 1D structures. We report that a small amount of water addition to the graphene oxide (GO) N-methyl-2-pyrrolidone (NMP) dispersion has significant influences on the mesophase structures and physical properties of wet-spun GFs. Notably, 2 wt % of water successfully hydrates GO flakes in NMP dope to form a stable graphene oxide liquid crystal (GOLC) phase. Furthermore, 4 wt % of water addition causes spontaneous planarization of wet-spun GFs. Motivated from these interesting findings, we develop highly electroconductive and mechanically strong flat GFs by introducing highly crystalline electrochemically exfoliated graphene (EG) in the wet-spinning of NMP-based GOLC fibers. The resultant high-performance hybrid GFs can be sewn on cloth, taking advantage of the mechanical robustness and high flexibility.

Metal Mimics: Lightweight, Strong, and Tough Nanocomposites and Nanomaterial Assemblies

The ideal structural material would have high strength and stiffness with a tough ductile failure, all with a low density. Historically, no such material exists, and materials engineers have had to sacrifice a desired property during materials selection, with metals (high density), fiber composites (brittle failure), and polymers (low stiffness) having fundamental limitations on at least one front. The ongoing revolution of nanomaterials provides a potential route to build on the potential of fiber-reinforced composites, matching their strength while integrating toughening behaviors akin to metal deformations, all while using low-weight constituents. Here, the challenges, approaches, and recent developments of nanomaterials for structural applications are discussed, with an emphasis on improving toughening mechanisms, which is often the neglected factor in a field that chases strength and stiffness.

Porous Graphene-Carbon Nanotube Scaffolds for Fiber Supercapacitors

Fiber nanomaterials can become fundamental devices that can be woven into smart textiles, for example, miniaturized fiber-based supercapacitors (FSCs). They can be utilized for portable, wearable electronics and energy storage devices, which are highly prospective areas of research in the future. Herein, we developed porous carbon nanotube-graphene hybrid fibers (CNT-GFs) for all-solid-state symmetric FSCs, which were assembled through wet-spinning followed by a hydrothermal activation process using environmentally benign chemicals (i.e., H₂O₂ and NH₄OH in deionized water). The barriers that limited effective ion accessibility in GFs were overcome by the intercalation of CNTs in the GFs which enhanced their electrical conductivity and mechanical properties as well. The all-solid-state symmetric FSCs of a precisely controlled activated hybrid fiber (a-CNT-GF) electrode exhibited an enhanced volumetric capacitance of 60.75 F cm^-3 compared with those of a pristine CNT-GF electrode (19.80 F cm^-3). They also showed a volumetric energy density (4.83 mWh cm^-3) roughly 3 times higher than that of untreated CNT-GFs (1.50 mWh cm^-3). The excellent mechanical flexibility and structural stability of a miniaturized a-CNT-GF are highlighted by the demonstration of negligible differences in capacitance upon bending and twisting. The mechanism of developing porous, large-scale, low-cost electrodes using an environmentally benign activation method presented in this work provides a promising route for designing a new generation of wearable, portable miniaturized energy storage devices.

Hybrid carbon nanostructured fibers: stepping stone for intelligent textile-based electronics

The journey of smart textile-based wearable technologies first started with the attachment of sensors to fabrics, followed by embedding sensors in apparels. Presently, garments themselves can be transformed into sensors, which demonstrates the tremendous growth in the field of smart textiles. Wearable applications demand flexible materials that can withstand deformation for their practical use on par with conventional textiles. To address this, we explore the potential reasons for the enhanced performance of wearable devices realized from the fabrication of carbon nanostructured fibers with the use of graphene, carbon nanotubes and other two-dimensional materials. This review presents a brief introduction on the fabrication strategies to form carbon-based fibers and the relationship between their properties and characteristics of the resulting materials. The likely mechanisms of fiber-based electronic and storage devices, focusing mainly on transistors, nano-generators, solar cells, supercapacitors, batteries, sensors and therapeutic devices are also presented. Finally, the future perspectives of this research field of flexible and wearable electronics are discussed. The present study supplements novel ideas not only for beginners aiming to work in this booming area, but also for researchers actively engaged in the field of fiber-based electronics, dealing with advanced electronics and wide range of functionalities integrated into textile fibers.

Microfluidics-enabled orientation and microstructure control of macroscopic graphene fibres

Macroscopic graphene structures such as graphene papers and fibres can be manufactured from individual two-dimensional graphene oxide sheets by a fluidics-enabled assembling process. However, achieving high thermal-mechanical and electrical properties is still challenging due to non-optimized microstructures and morphology. Here, we report graphene structures with tunable graphene sheet alignment and orientation, obtained via microfluidic design, enabling strong size and geometry confinements and control over flow patterns. Thin flat channels can be used to fabricate macroscopic graphene structures with perfectly stacked sheets that exhibit superior thermal and electrical conductivities and improved mechanical strength. We attribute the observed shape and size confinements to the flat distribution of shear stress from the anisotropic microchannel walls and the enhanced shear thinning degree of large graphene oxide sheets in solution. Elongational and step expansion flows are created to produce large-scale graphene tubes and rods with horizontally and perpendicularly aligned graphene sheets by tuning the elongational and extensional shear rates, respectively.

Bioinspired Supertough Graphene Fiber through Sequential Interfacial Interactions

Natural nacre exhibits extraordinary functional and structural diversity, combining high strength and toughness. The mechanical properties of nacre are attributed to (i) a highly arranged hierarchical layered structure of inorganic minerals (95 vol %) containing a small amount only of organic materials (5 vol %), (ii) abundant synergistic interfacial interactions, and (iii) formation under ambient temperature. Herein, inspired by these three design principles originating from natural nacre, the supertough bioinspired graphene-based nanocomposite fibers (BGNFs) are prepared under room temperature via sequential interfacial interactions of ionic bonding and π-π interactions. The resultant synergistic effect leads to a super toughness of 18.7 MJ m^-3 as well as a high tensile strength of 740.1 MPa. In addition, the electrical conductivity of these supertough BGNFs is as high as 384.3 S cm^-1. They can retain almost 80% of this conductivity even after 1000 cycles of loading-unloading testing, which makes these BGNFs promising candidates for application in flexible and stable electrical devices, such as strain sensors and actuators.

Design and Mechanisms of Asymmetric Supercapacitors

Ongoing technological advances in diverse fields including portable electronics, transportation, and green energy are often hindered by the insufficient capability of energy-storage devices. By taking advantage of two different electrode materials, asymmetric supercapacitors can extend their operating voltage window beyond the thermodynamic decomposition voltage of electrolytes while enabling a solution to the energy storage limitations of symmetric supercapacitors. This review provides comprehensive knowledge to this field. We first look at the essential energy-storage mechanisms and performance evaluation criteria for asymmetric supercapacitors to understand the wide-ranging research conducted in this area. Then we move to the recent progress made for the design and fabrication of electrode materials and the overall structure of asymmetric supercapacitors in different categories. We also highlight several key scientific challenges and present our perspectives on enhancing the electrochemical performance of future asymmetric supercapacitors.

Graphene and Other 2D Colloids: Liquid Crystals and Macroscopic Fibers

Two-dimensional colloidal nanomaterials are running into renaissance after the enlightening researches of graphene. Macroscopic one-dimensional fiber is an optimal ordered structural form to express the in-plane merits of 2D nanomaterials, and the formation of liquid crystals (LCs) allows the creation of continuous fibers. In the correlated system from LCs to fibers, understanding their macroscopic organizing behavior and transforming them into new solid fibers is greatly significant for applications. Herein, we retrospect the history of 2D colloids and discuss about the concept of 2D nanomaterial fibers in the context of LCs, elaborating the motivation, principle and possible strategies of fabrication. Then we highlight the creation, development and typical applications of graphene fibers. Additionally, the latest advances of other 2D nanomaterial fibers are also summarized. Finally, conclusions, challenges and perspectives are provided to show great expectations of better and more fibrous materials of 2D nanomaterials. This review gives a comprehensive retrospect of the past century-long effort about the whole development of 2D colloids, and plots a clear roadmap - "lamellar solid - LCs - macroscopic fibers - flexible devices", which will certainly open a new era of structural-multifunctional application for the conventional 2D colloids.

Highly Sensitive Wearable Textile-Based Humidity Sensor Made of High-Strength, Single-Walled Carbon Nanotube/Poly(vinyl alcohol) Filaments

Textile-based humidity sensors can be an important component of smart wearable electronic-textiles and have potential applications in the management of wounds, bed-wetting, and skin pathologies or for microclimate control in clothing. Here, we report a wearable textile-based humidity sensor for the first time using high strength (∼750 MPa) and ultratough (energy-to-break, 4300 J g^-1) SWCNT/PVA filaments via a wet-spinning process. The conductive SWCNT networks in the filaments can be modulated by adjusting the intertube distance by swelling the PVA molecular chains via the absorption of water molecules. The diameter of a SWCNT/PVA filament under wet conditions can be as much as 2 times that under dry conditions. The electrical resistance of a fiber sensor stitched onto a hydrophobic textile increases significantly (by more than 220 times) after water sprayed. Textile-based humidity sensors using a 1:5 weight ratio of SWCNT/PVA filaments showed high sensitivity in high relative humidity. The electrical resistance increases by more than 24 times in a short response time of 40 s. We also demonstrated that our sensor can be used to monitor water leakage on a high hydrophobic textile (contact angle of 115.5°). These smart textiles will pave a new way for the design of novel wearable sensors for monitoring blood leakage, sweat, and underwear wetting.

Macroscopic assembly of flexible and strong green graphene fibres

The scalable production presented here facilitates flexible, strong and electrically conductive graphene fibres, which have emerged as promising graphene based electronic textiles and sensors.

A remote controllable fiber-type near-infrared light-responsive actuator

A fiber-type near-infrared light-responsive actuator exhibited significant features: remote control, low temperature permitted actuation and effective driving of the shape change of a fabric.

A simple and large-scale method to prepare flexible hollow graphene fibers for a high-performance all-solid fiber supercapacitor

The fabrication of hollow graphene fibers (HGFs) via simple spray deposition of GO on silk fiber templates for a flexible supercapacitor.

Fabrication of light, flexible and multifunctional graphene nanoribbon fibers via a 3D solution printing method

Graphene oxide nanoribbons (GONRs) are one of the most promising carbon based materials. The integration of 2D GONR sheets into macroscopic materials, such as continuous fibers or film, leads the way in translating the good properties of individual GONR sheets into macroscopic and ordered materials for future applications. In this study, we first report the fabrication of GONR fibers utilizing GONR sheets as the raw material without any supporting surfactant or polymer. The method of fabricating fibers is referred to as '3D solution printing'. GONR fibers exhibit good mechanical and electrical properties, whose tensile strength and electrical conductivity could reach up to 95 MPa and 680 S cm^-1, respectively. Hence, the fabricated 3D integrated circuits are lighter and smaller compared to traditional metal circuits, and with high electrical properties. The 3D integrated circuits, therefore, have a bright future prospect.

Bioinspired Graphene-Based Nanocomposites and Their Application in Flexible Energy Devices

Graphene is the strongest and stiffest material ever identified and the best electrical conductor known to date, making it an ideal candidate for constructing nanocomposites used in flexible energy devices. However, it remains a great challenge to assemble graphene nanosheets into macro-sized high-performance nanocomposites in practical applications of flexible energy devices using traditional approaches. Nacre, the gold standard for biomimicry, provides an excellent example and guideline for assembling two-dimensional nanosheets into high-performance nanocomposites. This review summarizes recent research on the bioinspired graphene-based nanocomposites (BGBNs), and discusses different bioinspired assembly strategies for constructing integrated high-strength and -toughness graphene-based nanocomposites through various synergistic effects. Fundamental properties of graphene-based nanocomposites, such as strength, toughness, and electrical conductivities, are highlighted. Applications of the BGBNs in flexible energy devices, as well as potential challenges, are addressed. Inspired from the past work done by the community a roadmap for the future of the BGBNs in flexible energy device applications is depicted.

Ultrastiff and Strong Graphene Fibers via Full-Scale Synergetic Defect Engineering

Kilometer-scale continuous graphene fibers (GFs) with outstanding mechanical properties and excellent electrical conductivity are produced by high-throughput wet-spinning of graphene oxide liquid crystals followed by graphitization through a full-scale synergetic defect-engineering strategy. GFs with superior performances promise wide applications in functional textiles, lightweight motors, microelectronic devices, and so on.

Fabricating of high-performance functional graphene fibers for micro-capacitive energy storage

Although graphene is a typical two dimensional materials, it has converted to multi-dimensional materials with many unique properties. As an example, the one dimensional graphene fiber is fabricated by utilizing ionic liquid as coagulation and functional diamines as cross-linkers to connect graphene oxide layers. The fibers show excellent mechanical properties and superior electrical performance. The tensile strength of the resultant fibers reaches ~729 MPa after a super high temperature thermal annealing treatment at 2800 °C. Additionally, quasi-solid-state flexible micro-capacitors are fabricated with promising result on energy storage. The device show a specific volumetric capacity as high as ~225 F/cm(3) (measured at 103.5 mA cm(-3) in a three-electrode cell), as well as a long cycle life of 2000 times. The initial results indicate that these fibers will be a good candidate to replace energy storage devices for miniaturized portable electronic applications.

Helical graphene oxide fibers as a stretchable sensor and an electrocapillary sucker

Fibers made from carbon nanotubes or graphene are strong and conductive; encoding helical structures into these fibers may render useful properties such as high stretchability. Here, we directly spin freestanding graphene oxide (GO) films into helical fibers consisting of uniformly arranged loops with tunable diameters, under controlled environmental humidity. Reduced GO fibers with a helical shape are stretched elastically with a reversible electrical resistance change for many strain cycles. Stretchable temperature sensors built on helical fibers work at large strains (up to 50%) and high temperature (up to 300 °C), with a reliable deformation-independent response. The GO fibers also contain through-channels inside with suitable pore size, which can take up an aqueous electrolyte quickly under a low bias, resulting in a fiber-shaped, on-off switchable electrocapillary sucker. Our multifunctional helical and hollow GO fibers have potential applications in stretchable fiber-shaped sensors, actuators and nano-fluid systems.

Design and fabrication of graphene fibers based on intermolecular forces and charge properties in a novel acidic system

This paper describes a new strategy of fabricating macroscopic graphene oxide fibers based on intermolecular forces and their charge properties in a new acidic coagulation system. This work extended the methods for preparation of graphene fibers.

Dynamic configuration of reduced graphene oxide in aqueous dispersion and its effect on thin film properties

The dynamic configuration of reduced graphene oxide (rGO) in an aqueous dispersion is revealed by several characterization methods, showing a spontaneous and seemingly irreversible configuration transition from flat to highly corrugated sheets over time. Such dynamic behaviour of rGO leads to a tailored porous structure of graphene-based thin films. This affects their permeation and electrochemical properties, as well as future industry adoption of graphene.

Graphene-Based Fibers: A Review

Motivated by their unique structure and excellent properties, significant progress has been made in recent years in the development of graphene-based fibers (GBFs). Potential applications of GBFs can be found, for instance, in conducting wires, energy storage and conversion devices, actuators, field emitters, solid-phase microextraction, springs, and catalysis. In contrast to graphene-based aerogels (GBAs) and membranes (GBMs), GBFs demonstrate remarkable mechanical and electrical properties and can be bent, knotted, or woven into flexible electronic textiles. In this review, the state-of-the-art of GBFs is summarized, focusing on their synthesis, performance, and applications. Future directions of GBF research are also proposed.

Highly conductive, flexible, and compressible all-graphene passive electronic skin for sensing human touch

A facile and passive multiply flexible thin-film sensor is demonstrated based on thermoelectric effects in graphene. The sensor is highly conductive, free-standing, flexible, and elastic. It senses heat and cold, and measures heated/cooled areas; it also discerns human touch from other pressures, locates human touch, and measures pressure levels. All of these sensing abilities are demonstrated without any internal/external power supply.