Long-lived and well-resolved Mn²⁺ ion emissions in CuInS-ZnS quantum dots

A Multistate Thermoresponsive Smart Window Based on a Multifunctional Luminescent Solar Concentrator

Conventional luminescent solar concentrators (LSCs) usually only have the ability to absorb solar energy and convert it to electricity but are not able to regulate the transmitted light. Herein, a multistate thermoresponsive smart window (SW) based on LSC has been fabricated, in which the stimuli-responsive host layer consists of polydimethylsiloxane (PDMS) and ethylene glycol solution (EGS) microdroplets stacking with LSC layer-based on near-infrared (NIR) CuInSe2-xSx/ZnS core/shell quantum dots (QDs) and PDMS matrix. As-synthesized CISSe/ZnS QDs with broad NIR absorption in LSC exhibit controllable emission spectra over 833-1088 nm and high photoluminescence (PL) quantum yield from 45 to 83%. Coupling with Si solar cells as a reference, optimized LSC-SW devices with dimensions of 5 × 5 × 0.9 cm3 exhibit higher power conversion efficiency (PCE) of 1.19-1.36% with increased temperature from 0 to 50 °C than those of sole LSC and SW devices. The corresponding visible light transmissions are regulated from 75.1 to 48.1% accordingly. The improvement of PCEs in an opaque state is mainly due to enhanced absorption of QDs originating from rescattered photons from the EGS/PDMS layer, leading to more emitted photons reaching photovoltaics. This work is expected to bring up new opportunities for applications in greenhouses, building facades, and energy-efficient smart windows.

Cadmium-Based Quantum Dots Alloyed Structures: Synthesis, Properties, and Applications

Cadmium-based alloyed quantum dots are one of the most popular metal chalcogenides in both the industrial and research fields owing to their extraordinary optical and electronic properties that can be manipulated by varying the compositional ratio in addition to size control. This report aims to cover the main information concerning the synthesis techniques, properties, and applications of Cd-based alloyed quantum dots. It provides a comprehensive overview of the most common synthesis methods for these QDs, which include hot injection, co-precipitation, successive ionic layer adsorption and reaction, hydrothermal, and microwave-assisted synthesis methods. This detailed literature highlights the optical and structural properties of both ternary and quaternary quantum dots. Also, this review provides the high-potential applications of various alloyed quantum dots.

Review of Mn-Doped Semiconductor Nanocrystals for Time-Resolved Luminescence Biosensing/Imaging

Colloidal semiconductor nanocrystals (NCs) have been developed for decades and are widely applied in biosensing/imaging. However, their biosensing/imaging applications are mainly based on luminescence-intensity measurement, which suffers from autofluorescence in complex biological samples and thus limits the biosensing/imaging sensitivities. It is expected for these NCs to be further developed to gain luminescence features that can overcome sample autofluorescence. On the other hand, time-resolved luminescence measurement utilizing long-lived-luminescence probes is an efficient technique to eliminate short-lived autofluorescence of samples while recording time-resolved luminescence of the probes for signal measurement after pulsed excitation from a light source. Despite time-resolved measurement being very sensitive, the optical limitations of many of the current long-lived-luminescence probes cause time-resolved measurement to be generally performed in laboratories with bulky and costly instruments. In order to apply highly sensitive time-resolved measurement for in-field or point-of-care (POC) testing, it is essential to develop probes possessing high brightness, low-energy (visible-light) excitation, and long lifetimes of up to milliseconds. Such desired optical features can significantly simplify the design criteria of time-resolved measurement instruments and facilitate the development of low-cost, compact, sensitive instruments for in-field or POC testing. Mn-doped NCs have recently been in rapid development and provide a strategy to solve the challenges faced by both colloidal semiconductor NCs and time-resolved luminescence measurement. In this review, we outline the major achievements in the development of Mn-doped binary and multinary NCs, with emphasis on their synthesis approaches and luminescence mechanisms. Specifically, we demonstrate how researchers approached these obstacles to achieve the aforementioned desired optical properties on the basis of the progressive understanding of Mn emission mechanisms. Afterward, we review representative applications of Mn-doped NCs in time-resolved luminescence biosensing/imaging and present the potential of Mn-doped NCs in advancing time-resolved luminescence biosensing/imaging for in-field or POC testing.

Optical Properties of Mn-Doped CuGa(In)S-ZnS Nanocrystals (NCs): Effects of Host NC and Mn Concentration

Time-gated fluorescence measurement (TGFM) using long-life fluorescence probes is a highly sensitive fluorescence-measurement technology due to the inherently high signal-to-background ratio. Although many probes for TGFM such as luminescent-metal-complex probes and lanthanide-doped nanoparticles are in development, they generally need sophisticated/expensive instruments for biosensing/imaging applications. Probes possessing high brightness, low-energy (visible light) excitation, and long lifetimes up to milliseconds of luminescence, are highly desired in order to simplify the optical and electronic design of time-gated instruments (e.g., adopting non-UV-grade optics or low-speed electronics), lower the instrument complexity and cost, and facilitate broader applications of TGFM. In this work, we developed Mn-doped CuGa(In)S-ZnS nanocrystals (NCs) using simple and standard synthetic steps to achieve all the desired optical features in order to investigate how the optical properties (fluorescence/absorption spectra, brightness, and lifetimes) of the Mn-doped NCs are affected by different host NCs and Mn concentrations in host NCs. With optimal synthetic conditions, a library of Mn-doped NCs was achieved that possessed high brightness (up to 47% quantum yield), low-energy excitation (by 405 nm visible light), and long lifetimes (up to 3.67 ms). Additionally, the time-domain fluorescence characteristics of optimal Mn-doped NCs were measured under pulsed 405 nm laser excitation and bandpass-filter-based emission collection. The measurement results indicate the feasibility of these optimal Mn-doped NCs in TGFM-based biosensing/imaging.

Mn-Doped AgZnInS/ZnS Nanocrystals (NCs): Effects of Zn Etching on the NC Optical Properties

Mn-doped I(II)-III-VI NCs (e.g., Mn-doped AgZnInS/ZnS NCs) possessing low-energy excitation, high brightness and long fluorescence lifetimes have been desired for time-gated fluorescence biosensing/imaging. In this type of NCs, their optical properties are significantly affected by the microscopic interactions between Mn and Mn and between Mn and host NC, the compositions of NCs, and the defects in NCs. On the other hand, it is known that Zn etching to core I(II)-III-VI NCs in NC synthesis can significantly enhance the NC brightness because Zn can exchange surface atoms (e.g., Ag and In) in NCs to minimize NC surface-defects. But for Mn-doped I(II)-III-VI NCs, Zn etching could etch out not only surface-atoms of host NCs (e.g., Ag and In) but also Mn in NCs. As a result, it could significantly affect the NC compositions and the microscopic interactions between Mn and Mn as well as between Mn and host NC, and thus the optical properties of NCs (like lifetime and absorption/emission spectra). Therefore, it is needed to investigate how Zn etching would affect the optical properties of such Mn-doped NCs. In this study, a series of Mn-doped AgZnInS NCs with different Mn doping levels were prepared through nucleation doping, and then Zn etching was applied to etch these core NCs. To identify the effects of Zn etching on NC optical properties, ZnS coating (a different ZnS shelling approach by injecting Zn precursor and S precursor alternately in synthesis) was performed on the same Mn:AgZnInS NCs, and the optical properties of NCs with these two different ZnS shelling approaches were compared. Experimental results showed that under appropriate Mn doping levels in synthesis, Zn etching instead of ZnS coating can produce low-energy excitable NCs with higher QYs and longer lifetimes, which would further facilitate the use of such NCs in time-gated fluorescence measurement. To understand the reasons for the different optical properties under different ZnS shelling approaches, the material characteristics of the prepared NCs were further measured/analyzed and the possible fluorescence mechanisms were discussed.

Tunable structural and optical properties of AgxCuyInS2 colloidal quantum dots

Herein is discussed tunable absorption and emission properties of AgxCuyInS2 quantum dots involving wurtzite to chalcopyrite phase transformation dependent on Ag+ dopant content.

Tunable structural and optical properties of CuInS2 colloidal quantum dots as photovoltaic absorbers

Facile phase selective synthesis of CuInS₂ (CIS) nanostructures has been an important pursuit because of the opportunity for tunable optical properties of the phases, and in this respect is investigated by hot-injection colloidal synthesis in this study. Relatively monodispersed colloidal quantum dots (3.8–5.6 nm) of predominantly chalcopyrite structure synthesized at 140, 180 and 210 °C over 60 minutes from copper(ii) hexafluoroacetylacetonate hydrate and indium(iii) diethyldithiocarbamate precursors exhibit temperature-dependent structural variability. The slightly off-stoichiometric quantum dots are copper-deficient in which copper vacancies , indium interstitials , indium–copper anti-sites and surface trapping states are likely implicated in broad photoluminescence emission with short radiative lifetimes, τ₁, τ₂, and τ₃ of 1.5–2.1, 7.8–13.9 and 55.2–70.8 ns and particle-size dependent tunable band gaps between 2.25 and 2.32 eV. Further structural and optical tunability (E_g between 2.03 and 2.28 eV) is achieved with possible time-dependent wurtzite to chalcopyrite phase transformation at 180 °C likely involving a dynamic interplay of kinetic and thermodynamic factors.

We report the facile hot-injection colloidal synthesis of near-stoichiometric CuInS₂ quantum dots at varying reaction times and temperatures which exhibit both optical and structural tunability with implications for enhanced photovoltaic utility.

Recent research on the luminous mechanism, synthetic strategies, and applications of CuInS2 quantum dots

We discuss the synthesis and luminescence mechanisms of CuInS₂ QDs, the strategies to improve their luminous performance and their potential application in light-emitting devices, solar energy conversion, and the biomedical field.

Near-Unity Red Mn2+ Photoluminescence Quantum Yield of Doped CsPbCl3 Nanocrystals with Cd Incorporation

Although Mn²⁺ doping in semiconductor nanocrystals (NCs) has been studied for nearly three decades, the near 100% photoluminescence (PL) quantum yield (QY) of Mn²⁺ emission has never been realized so far. Herein, greatly improved PL QYs of Mn²⁺ emissions are reported in Mn²⁺-doped CsPbCl₃ NCs with various Mn²⁺ doping concentrations after CdCl₂ post-treatment at room temperature. Specifically, the near-unity QY and near single-exponential decay of red Mn²⁺ emission peaking at 627 nm in doped CsPbCl₃ NCs are obtained for the first time. The temperature dependence of steady-state and time-resolved PL spectra reveals that the CdCl₂ post-treatment significantly reduces the nonradiative defect states and enhances the energy transfer from host to Mn²⁺ ions. Moreover, the Mn²⁺:CsPbCl₃ NCs after CdCl₂ post-treatment exhibit robust stability and high PL QYs after multipurification. The results will provide an effective route to obtain doped perovskite NCs with high performance for white lighting emitting diodes.

Human Umbilical Cord Wharton's Jelly-Derived Mesenchymal Stem Cells Labeled with Mn2+ and Gd3+ Co-Doped CuInS2-ZnS Nanocrystals for Multimodality Imaging in a Tumor Mice Model

Mesenchymal stem cell (MSCs) therapy has recently received profound interest as a targeting platform in cancer theranostics because of inherent tumor-homing abilities. However, the terminal tracking of MSCs engraftment by fluorescent in situ hybridization, immuno-histochemistry, and flow-cytometry techniques to translate into clinics is still challenging because of a dearth of inherent MSCs-specific markers and FDA approval for genetic modifications of MSCs. To address this challenge, a cost-effective noninvasive imaging technology based on multifunctional nanocrystals (NCs) with enhanced detection sensitivity, spatial-temporal resolution, and deep-tissue diagnosis is needed to be developed to track the transplanted stem cells. A hassle-free labeling of human umbilical cord Wharton's Jelly (WJ)-derived MSCs with Mn²⁺ and Gd³⁺ co-doped CuInS₂-ZnS (CIS-ZMGS) NCs has been demonstrated in 2 h without requiring an electroporation process or transfection agents. It has been found that WJ-MSCs labeling did not affect their multilineage differentiation (adipocyte, osteocyte, chondrocyte), immuno-phenotypes (CD44⁺, CD105⁺, CD90⁺), protein (β-actin, vimentin, CD73, α-SMCA), and gene expressions. Interestingly, CIS-ZMGS-NCs-labeled WJ-MSCs exhibit near-infrared (NIR) fluorescence with a quantum yield of 84%, radiant intensity of ∼3.999 × 10¹¹ (p/s/cm²/sr)/(μW/cm²), magnetic relaxivity (longitudinal r₁ = 2.26 mM^-1 s^-1, transverse r₂ = 16.47 mM^-1 s^-1), and X-ray attenuation (78 HU) potential for early noninvasive multimodality imaging of a subcutaneous melanoma in B16F10-tumor-bearing C57BL/6 mice in 6 h. The ex vivo imaging and inductively coupled plasma mass-spectroscopy analyses of excised organs along with confocal microscopy and immunofluorescence of tumor results also significantly confirmed the positive tropism of CIS-ZMGS-NCs-labeled WJ-MSCs in the tumor environment. Hence, we propose the magnetofluorescent CIS-ZMGS-NCs-labeled WJ-MSCs as a next-generation nanobioprobe of three commonly used imaging modalities for stem cell-assisted anticancer therapy and tracking tissue/organ regenerations.

Thermodynamics of Dual Doping in Quantum Dots

Dual doping is a powerful way to tailor the properties of semiconductor quantum dots (QDs) arising out of host-dopant and dopant-dopant interactions. Nevertheless, it has seldom been explored due to a variety of thermodynamic challenges, such as the differential bonding strength and diffusion constant within the host matrix that integrates with the host in dissimilar ways. This work discusses the challenges involved in administering them within the constraints of one host under similar conditions of temperature, time, and chemical parameters such as solubility and reactivity using CoPt-doped CdS QDs as a model system. In addition, the various forces in play, such as Kirkendall diffusion, solid- and liquid-state diffusion, hard acid soft base interaction with the host, and the effect of lattice strain due to lattice mismatch, are studied to understand the feasibility of the core to doped transformation. These findings suggest a potential approach for manipulating the properties of semiconductors by dual doping engineering.

Tunable Emission of Bluish Zn-Cu-Ga-S Quantum Dots by Mn Doping and Their Electroluminescence

On the basis of bluish-emitting double-shelled quantum dots (QDs) of Zn-Cu-Ga-S (ZCGS)/ZnS/ZnS, Mn doping into ZCGS host with different Mn/Cu concentrations is implemented via surface adsorption and lattice diffusion. The resulting double-shelled Mn-doped ZCGS (ZCGS/Mn) QDs exhibit a distinct Mn^2+ 4T₁-⁶A₁ emission as a consequence of effective lattice incorporation simultaneously with host intragap states-involving emissions of free-to-bound and donor-acceptor pair recombinations. The relative contribution of Mn emission to the overall photoluminescence (PL) is consistently proportional to its concentration, resulting in tunable PL from bluish, white, to reddish white. Regardless of Mn doping and its concentration, all QDs possess high PL quantum yield levels of 74-79%. Those undoped and doped QDs are then employed as an emitting layer (EML) of all-solution-processed QD-light-emitting diodes (QLEDs) with hybrid charge transport layers and their electroluminescence (EL) is compared. Compared to undoped QDs, doped analogues give rise to a huge spectral disparity of EL versus PL, specifically showing a near-complete quenching of Mn²⁺ EL. This unexpected observation is rationalized primarily by considering unbalanced carrier injection to QD EML on the basis of energetic alignment of the present QLED and rapid trapping of holes injected at intragap states of QDs.

Enhanced luminescence and energy transfer in Mn2+ doped CsPbCl3-xBrx perovskite nanocrystals

Manganese ion (Mn²⁺) doped CsPbCl_3-xBr_x nanocrystals (NCs) with dual emissions have emerged as a promising candidate for white light emitting devices. The luminescence properties of Mn²⁺ doped CsPbCl_3-xBr_x NCs were studied by steady-state and time-resolved photoluminescence (PL) spectroscopy at temperature ranging from 80 to 300 K. The Mn²⁺ doped NCs with varied Br compositions were synthesized by means of Cl-to-Br anion exchange. The obtained doped NCs exhibited a tunable narrow band-edge emission band from 405 to 500 nm with a lengthened PL lifetime and a wide Mn²⁺ emission band at 600 nm with a shortened PL lifetime as the Br composition increases. It was interestingly found that PL intensity of the Mn²⁺ emission band was significantly enhanced by replacing Cl ions with Br and reached the maximum value in Mn²⁺:CsPbCl_2.15Br_0.85 NCs. Especially at low temperature (80 K), the intensity ratios of Mn²⁺ emission to band-edge emission increased ∼80 times in Mn²⁺:CsPbCl_2.15Br_0.85 NCs, compared with Mn²⁺:CsPbCl₃ ones. The temperature-dependent energy-transfer efficiencies of Mn²⁺:CsPbCl₃ and Mn²⁺:CsPbCl_2.15Br_0.85 NCs from excitons in NCs to Mn²⁺ ions were obtained. The PL enhancement of Mn²⁺ in CsPbCl_3-xBr_x NCs was attributed to Br composition-dependent exciton energy transfer to Mn²⁺.

Mn Doped AZIS/ZnS Nanocrystals (NCs): Effects of Ag and Mn Levels on NC Optical Properties

In this work, Mn-doped AZIS/ZnS NCs were prepared using a nucleation doping approach with the tuning of Mn and Ag levels in their synthesis. The optical properties of Mn:AZIS/ZnS NCs are found to be significantly affected by Ag and Mn levels. Specifically, more Ag and Mn atoms in Mn:AZIS/ZnS NCs cause their fluorescence red-shift, and as the Ag or Mn level reaches a high threshold, the fluorescence lifetime of Mn:AZIS/ZnS NC has a significant drop. The reasons for the effects of Mn and Ag levels on NC optical properties were explored and discussed. Through this study, it is also found that with certain Ag and Mn levels in synthesis, some Mn:AZIS/ZnS NCs present optimal optical properties including high brightness (QY > 40%), long fluorescence lifetime (> 1.2 ms), low energy for excitation (excitable at 405 nm), and no reabsorption. The feasibility of the optimized NCs for time-gated fluorescence measurement using a portable/compact instrument was further demonstrated, which indicates the application potential of the NCs in time-gated biosensing including point-of-care testing. Notably, this study also discloses that Mn:AZIS/ZnS NCs with different lifetimes can be achieved by tuning Mn and Ag levels in synthesis, which may further broaden the applications of Mn:AZIS/ZnS NCs in multiplexing detection/measurement.

Interface Engineering in Quantum-Dot-Sensitized Solar Cells

The unique properties of II-VI semiconductor nanocrystals such as superior light absorption, size-dependent optoelectronic properties, solution processability, and interesting photophysics prompted quantum-dot-sensitized solar cells (QDSSCs) as promising candidates for next-generation photovoltaic (PV) technology. QDSSCs have advantages such as low-cost device fabrication, multiple exciton generation, and the possibility to push over the theoretical power conversion efficiency (PCE) limit of 32%. In spite of dedicated research efforts to enhance the PCE, optimize individual solar cell components, and better understand the underlying science, QDSSCs have unfortunately not lived up to their potential due to shortcomings in the fabrication process and with the QDs themselves. In this feature article, we briefly discuss the QDSSC concepts and mechanisms of the charge carrier recombination pathways that occur at multiple interfaces, viz., (i) metal oxide (MO)/QDs, (ii) MO/QDs/electrolyte, and (iii) counter electrode (CE)/electrolyte. The rational strategies that have been developed to minimize/block these charge recombination pathways are elaborated. The article concludes with a discussion of the present challenges in fabricating efficient devices and future prospects for QDSSCs.

Cd-free Cu-doped ZnInS/ZnS Core/Shell Nanocrystals: Controlled Synthesis And Photophysical Properties

Here, we report efficient composition-tunable Cu-doped ZnInS/ZnS (core and core/shell) colloidal nanocrystals (CNCs) synthesized by using a colloidal non-injection method. The initial precursors for the synthesis were used in oleate form rather than in powder form, resulting in a nearly defect-free photoluminescence (PL) emission. The change in Zn/In ratio tunes the percentage incorporation of Cu in CNCs. These highly monodisperse Cu-doped ZnInS CNCs having variable Zn/In ratios possess peak emission wavelength tunable from 550 to 650 nm in the visible spectrum. The quantum yield (QY) of these synthesized Cd-free CNCs increases from 6.0 to 65.0% after coating with a ZnS shell. The CNCs possessing emission from a mixed contribution of deep trap and dopant states to only dominant dopant-related Stokes-shifted emission are realized by a careful control of stoichiometric ratio of different reactant precursors during synthesis. The origin of this shift in emission was understood by using steady state and time-resolved fluorescence (TRF) spectroscopy studies. As a proof-of-concept demonstration, these blue excitable Cu-doped ZnInS/ZnS CNCs have been integrated with commercial blue LEDs to generate white-light emission (WLE). The suitable combination of these highly efficient doped CNCs results led to a Commission Internationale de l'Enclairage (CIE) color coordinates of (0.33, 0.31) at a color coordinate temperature (CCT) of 3694 K, with a luminous efficacy of optical radiation (LER) of 170 lm/Wopt and a color rendering index (CRI) of 88.

Mass production of Mn2+-doped CsPbCl3 perovskite nanocrystals with high quality and enhanced optical performance

A novel microwave-assisted hot injection strategy for mass production of high quality Mn²⁺:CsPbCl₃ NCs was reported.

Bright type-II photoluminescence from Mn-doped CdS/ZnSe/ZnS quantum dots with Mn2+ ions as exciton couplers

Mn²⁺ ions were introduced as exciton couplers to enhance the quantum yield (QY) of type-II photoluminescence (PL) from CdS/ZnSe/ZnS quantum dots (QDs) with slow hot-exciton cooling and low radiative rate. Transient absorption spectroscopy verifies the faster bleach recovery and faster peak red-shifting at the charge-transfer state. And the transient PL peak of the QDs changes from blue-shifting to red-shifting due to Mn²⁺ doping. The QY of type-II PL can be enhanced from ∼35% to ∼60% by Mn²⁺ doping. As the energy-transfer-stations of hot excitons during rapid ET (∼100 ps), Mn²⁺ ions transform more excitons from hot to cold for emission. As the couplers of cold excitons during long thermal equilibrium (∼100 ns), Mn²⁺ ions further decrease exciton trapping by strong bidirectional coupling. This work provides a unique way of acquiring high QY of type-II PL, and highlights the general law of PL enhancement in Mn-doped QDs.

Sustainable, Rapid Synthesis of Bright-Luminescent CuInS2-ZnS Alloyed Nanocrystals: Multistage Nano-xenotoxicity Assessment and Intravital Fluorescence Bioimaging in Zebrafish-Embryos

Near-infrared (NIR) luminescent CuInS₂-ZnS alloyed nanocrystals (CIZS-NCs) for highly fluorescence bioimaging have received considerable interest in recent years. Owing, they became a desirable alternative to heavy-metal based-NCs and organic dyes with unique optical properties and low-toxicity for bioimaging and optoelectronic applications. In the present study, bright and robust CIZS-NCs have been synthesized within 5 min, as-high-as 230 °C without requiring any inert-gas atmosphere via microwave-solvothermal (MW-ST) method. Subsequently, the in vitro and in vivo nano-xenotoxicity and cellular uptake of the MUA-functionalized CIZS-NCs were investigated in L929, Vero, MCF7 cell lines and zebrafish-embryos. We observed minimal toxicity and acute teratogenic consequences upto 62.5 μg/ml of the CIZS-NCs in zebrafish-embryos. We also observed spontaneous uptake of the MUA-functionalized CIZS-NCs by 3 dpf older zebrafish-embryos that are evident through bright red fluorescence-emission at a low concentration of 7.8 μg/mL. Hence, we propose that the rapid, low-cost, large-scale “sustainable” MW-ST synthesis of CIZS-NCs, is an ideal bio-nanoprobe with good temporal and spatial resolution for rapid labeling, long-term in vivo tracking and intravital-fluorescence-bioimaging (IVBI).

Tunable White Fluorescent Copper Gallium Sulfide Quantum Dots Enabled by Mn Doping

Fluorescence of semiconductor quantum dots (QDs) can be tuned by engineering the band gap via size and composition control and further doping them with impurity ions. Targeting on highly bright white-emissive I-III-VI -type copper gallium sulfide (Cu-Ga-S, CGS) host QDs with the entire visible spectral coverage of blue to red, herein, Mn(2+) ion doping, through surface adsorption and lattice diffusion is fulfilled. Upon doping a distinct Mn emission from (4)T1-(6)A1 transition successfully appears in white photoluminescence (PL) of undoped CGS/ZnS core/shell QDs and with varying Mn concentration a systematic white spectral evolution of CGS:Mn/ZnS QDs is achievable with high PL quantum yield retained. The origins of white PL of CGS:Mn/ZnS QDs that is well decomposed into three emission bands are appropriately assigned. The resulting single-phased, doped QDs are then employed as near-UV-to-white down converters for the fabrication of white light-emitting diodes (LEDs). Electroluminescent properties of white QD-LEDs depending on Mn concentration of CGS:Mn/ZnS QDs and forward current are also discussed in detail.

Ultrasensitive, Real-time and Discriminative Detection of Improvised Explosives by Chemiresistive Thin-film Sensory Array of Mn(2+) Tailored Hierarchical ZnS

A simple method combing Mn²⁺ doping with a hierarchical structure was developed for the improvement of thin-film sensors and efficient detection of the explosives relevant to improvised explosive devices (IEDs). ZnS hierarchical nanospheres (HNs) were prepared via a solution-based route and their sensing performances were manipulated by Mn²⁺ doping. The responses of the sensors based on ZnS HNs towards 8 explosives generally increase firstly and then decrease with the increase of the doped Mn²⁺ concentration, reaching the climate at 5% Mn²⁺. Furthermore, the sensory array based on ZnS HNs with different doping levels achieved the sensitive and discriminative detection of 6 analytes relevant to IEDs and 2 military explosives in less than 5 s at room temperature. Importantly, the superior sensing performances make ZnS HNs material interesting in the field of chemiresistive sensors, and this simple method could be a very promising strategy to put the sensors based on thin-films of one-dimensional (1D) nanostructures into practical IEDs detection.

Facile Synthesis of Cadmium-Free Zn-In-S:Ag/ZnS Nanocrystals for Bio-Imaging

High quality cadmium-free Zn-In-S:Ag doped-nanocrystals (d-NCs) were synthesized via a simple one-step noninjection route using silver nitrate, indium acetate, zinc acetate, oleylamine, S powder and 1-dodecanethiol as starting materials in an organic phase. The size and optical properties can be effectively tailored by controlling the reaction time, reaction temperature, Ag(+) dopant concentration, and the molar ratio of In to Zn. The photoluminescence wavelength of as-prepared Zn-In-S:Ag NCs covered a broad visible range from 458 nm to 603 nm. After being passivated by protective ZnS shell, the photoluminescence quantum yield (PLQY) of Zn-In-S:Ag(+) /ZnS was greatly improved to 43.5%. More importantly, the initial high PLQY of the obtained core/shell d-NCs in organic media can be preserved when being transferred into the aqueous media via ligand exchange. Finally, high quality Zn-In-S:Ag(+) /ZnS d-NCs in aqueous phase were applied as bio-imaging agents for identifying living KB cells.

Förster resonance energy transfer mediated enhancement of the fluorescence lifetime of organic fluorophores to the millisecond range by coupling to Mn-doped CdS/ZnS quantum dots

Manganese-doped CdS/ZnS quantum dots have been used as energy donors in a Förster-like resonance energy transfer (FRET) process to enhance the effective lifetime of organic fluorophores. It was possible to tune the effective lifetime of the fluorophores by about six orders of magnitude from the nanosecond (ns) up to the millisecond (ms) region. Undoped and Mn-doped CdS/ZnS quantum dots functionalized with different dye molecules were selected as a model system for investigating the multiple energy transfer process and the specific interaction between Mn ions and the attached dye molecules. While the lifetime of the free dye molecules was about 5 ns, their linking to undoped CdS/ZnS quantum dots led to a long effective lifetime of about 150 ns, following a non-exponential transient. Manganese-doped core-shell quantum dots further enhanced the long-lasting decay time of the dye to several ms. This opens up a pathway to analyse different fluorophores in the time domain with equal spectral emissions. Such lifetime multiplexing would be an interesting alternative to the commonly used spectral multiplexing in fluorescence detection schemes.

Red-Tuned Mn d-d Emission in Doped Semiconductor Nanocrystals

Light-emitting Mn-doped semiconductor nanocrystals have been extensively studied for the last three decades for their intense and stable Mn d-d emission. In principle, this emission should be fixed at 585 nm (yellow), but recent studies have shown that the emission can be widely tuned even to 650 nm (red). This is a spectacular achievement as this would make Mn-doped nanocrystals efficient and tunable light emitters. Keeping these developments in view, the chemistry of the synthesis of these materials, their photophysical processes and the expected origins of their red emission are summarized in this Minireview. All the related important studies from 1992 onwards are chronologically discussed, and one particular case is elaborated on in detail. As these materials are potentially important for biology, and photovoltaic, sensing and light-emitting devices, this Minireview is expected to help researchers investigating the chemistry, physics and applications of these materials.

A new family of wurtzite-phase Cu2ZnAS4−x and CuZn2AS4 (A = Al, Ga, In) nanocrystals for solar energy conversion applications

A new family of semiconductors Cu₂ZnAS_4−x and CuZn₂AS₄ (A = Al, Ga, In) that absorb strongly at visible wavelengths has been synthesized as nanocrystals.

Multi-modal imaging of HeLa cells using a luminescent ZnS:Mn/NaGdF4:Yb:Er nanocomposite with enhanced upconversion red emission

ZnS:Mn/NaGdF₄:Yb:Er nanocomposite was synthesized using a single-step hot injection method and then applied in the downconversion and upconversion optical imaging of living HeLa cells.

Construction of Ag-doped Zn–In–S quantum dots toward white LEDs and 3D luminescent patterning

The synthesis of green photoluminescent Ag-doped Zn–In–S quantum dots and their applications in patterning and white LEDs are reported.

Photoluminescence properties of transition metal-doped Zn–In–S/ZnS core/shell quantum dots in solid films

The photoluminescence (PL) properties of transition metal ion (Mn²⁺ or Cu⁺) doped Zn–In–S/ZnS core/shell quantum dots (QDs) in solution and solid films were investigated by using steady-state and time-resolved PL spectra.

Large Stokes Shift and High Efficiency Luminescent Solar Concentrator Incorporated with CuInS2/ZnS Quantum Dots

Luminescent solar concentrator (LSC) incorporated with quantum dots (QDs) have been widely regarded as one of the most important development trends of cost-effective solar energy. In this study, for the first time we report a new QDs-LSC integrated with heavy metal free CuInS₂/ZnS core/shell QDs with large Stokes shift and high optical efficiency. The as-prepared CuInS₂/ZnS QDs possess advantages of high photoluminescence quantum yield of 81% and large Stocks shift more than 150 nm. The optical efficiency of CuInS₂/ZnS QDs-LSC reaches as high as 26.5%. Moreover, the power conversion efficiency of the QDs-LSC-PV device reaches more than 3 folds to that of pure PMMA-PV device. Furthermore, the PV device is able to harvest 4.91 folds solar energy with the assistance of this new CuInS₂/ZnS QDs-LSC for the same size c-Si PV cell. The results demonstrate that this new CuInS₂/ZnS QDs-LSC provides a promising way for the high efficiency, nonhazardous and low cost solar energy.

Dual emissive manganese and copper Co-doped Zn-In-S quantum dots as a single color-converter for high color rendering white-light-emitting diodes

Novel white light emitting diodes (LEDs) with environmentally friendly dual emissive quantum dots (QDs) as single color-converters are one of the most promising high-quality solid-state lighting sources for meeting the growing global demand for resource sustainability. A facile method was developed for the synthesis of the bright green-red-emitting Mn and Cu codoped Zn-In-S QDs with an absorption bangdgap of 2.56 eV (485 nm), a large Stokes shift of 150 nm, and high emission quantum yield up to 75%, which were suitable for warm white LEDs based on blue GaN chips. The wide photoluminescence (PL) spectra composed of Cu-related green and Mn-related red emissions in the codoped QDs could be controlled by varying the doping concentrations of Mn and Cu ions. The energy transfer processes in Mn and Cu codoped QDs were proposed on the basis of the changes in PL intensity and lifetime measured by means of steady-state and time-resolved PL spectra. By integrating these bicolor QDs with commercial GaN-based blue LEDs, the as-fabricated tricolor white LEDs showed bright natural white light with a color rendering index of 95, luminous efficacy of 73.2 lm/W, and color temperature of 5092 K. These results indicated that (Mn,Cu):Zn-In-S/ZnS QDs could be used as a single color-converting material for the next generation of solid-state lighting.