Highly efficient electronic sensitization of non-oxidized graphene flakes on controlled pore-loaded WO3 nanofibers for selective detection of H2S molecules

Top-Down Approaches for 10 nm-Scale Nanochannel: Toward Exceptional H2S Detection

Metal oxide semiconductors (MOS) have proven to be most powerful sensing materials to detect hydrogen sulfide (H₂S), achieving part per billion (ppb) level sensitivity and selectivity. However, there has not been a way of extending this approach to the top-down H₂S sensor fabrication process, completely limiting their commercial-level productions. In this study, we developed a top-down lithographic process of a 10 nm-scale SnO₂ nanochannel for H₂S sensor production. Due to high-resolution (15 nm thickness) and high aspect ratio (>20) structures, the nanochannel exhibited highly sensitive H₂S detection performances (R_a/R_g = 116.62, τ_res = 31 s at 0.5 ppm) with selectivity (R_H2S/R_acetone = 23 against 5 ppm acetone). In addition, we demonstrated that the nanochannel could be efficiently sensitized with the p-n heterojunction without any postmodification or an additional process during one-step lithography. As an example, we demonstrated that the H₂S sensor performance can be drastically enhanced with the NiO nanoheterojunction (R_a/R_g = 166.2, τ_res = 21 s at 0.5 ppm), showing the highest range of sensitivity demonstrated to date for state-of-the-art H₂S sensors. These results in total constitute a high-throughput fabrication platform to commercialize the H₂S sensor that can accelerate the development time and interface in real-life situations.

Highly Selective Ethyl Mercaptan Sensing Using a MoSe2/SnO2 Composite at Room Temperature

Volatile organic sulfur compounds (VOSCs) serve not only as biomarkers for dental diseases such as halitosis but also as a tracer for monitoring air quality. Room-temperature selective detection and superior sensitivity against VOSCs at a sub-ppm level has remained a challenging task. Here, we propose a heterostructure-based design using a MoSe2/SnO2 composite for achieving sensitive and selective detection of ethyl mercaptan at room temperature. The composite was synthesized via a facile two-step method. A composite-based device has shown detection down to 1 ppm of ethyl mercaptan over a wider range of relative humidity (40-90%). Notably, the composite has shown adsorption selectivity toward ethyl mercaptan compared to hydrogen sulfide and other reducing or oxidizing analytes. Moreover, a density functional theory (DFT) study has been performed to understand the adsorption selectivity, charge transfer, and modification in the electronic properties after molecule adsorption on the host surface. Simulations predicted the lowest negative adsorption energy for ethyl mercaptan, implying the chemisorption (-142.029 kJ mol-1) process of adsorption. The device thus-obtained has also shown a stable response even at an extreme relative humidity level of 90%. The obtained results and superior signal-to-noise ratio indicate that a MoSe2/SnO2-based sensor may be a promising candidate for highly selective and sensitive detection of ethyl mercaptan even below 1 ppm.

Facile Fabrication of ZnO-ZnFe2O4 Hollow Nanostructure by a One-Needle Syringe Electrospinning Method for a High-Selective H2S Gas Sensor

Herein, a facile fabrication process of ZnO-ZnFe₂O₄ hollow nanofibers through one-needle syringe electrospinning and the following calcination process is presented. The various compositions of the ZnO-ZnFe₂O₄ nanofibers are simply created by controlling the metal precursor ratios of Zn and Fe. Moreover, the different diffusion rates of the metal oxides and metal precursors generate a hollow nanostructure during calcination. The hollow structure of the ZnO-ZnFe₂O₄ enables an enlarged surface area and increased gas sensing sites. In addition, the interface of ZnO and ZnFe₂O₄ forms a p-n junction to improve gas response and to lower operation temperature. The optimized ZnO-ZnFe₂O₄ has shown good H₂S gas sensing properties of 84.5 (S = R_a/R_g) at 10 ppm at 250 °C with excellent selectivity. This study shows the good potential of p-n junction ZnO-ZnFe₂O₄ on H₂S detection and affords a promising sensor design for a high-performance gas sensor.

Surface Activity-Tuned Metal Oxide Chemiresistor: Toward Direct and Quantitative Halitosis Diagnosis

Continuous monitoring of hydrogen sulfide (H₂S) in human breath for early stage diagnosis of halitosis is of great significance for prevention of dental diseases. However, fabrication of a highly selective and sensitive H₂S gas sensor material still remains a challenge, and direct analysis of real breath samples has not been properly attempted, to the best of our knowledge. To address the issue, herein, we introduce facile cofunctionalization of WO₃ nanofibers with alkaline metal (Na) and noble metal (Pt) catalysts via the simple addition of sodium chloride (NaCl) and Pt nanoparticles (NPs), followed by electrospinning process. The Na-doping and Pt NPs decoration in WO₃ grains induces the partial evolution of the Na₂W₄O₁₃ phase, causing the buildup of Pt/Na₂W₄O₁₃/WO₃ multi-interface heterojunctions that selectively interacts with sulfur-containing species. As a result, we achieved the highest-ranked sensing performances, that is, response (R_air/R_gas) = 780 @ 1 ppm and selectivity (R_H2S/R_EtOH) = 277 against 1 ppm ethanol, among the chemiresistor-based H₂S sensors, owing to the synergistic chemical and electronic sensitization effects of the Pt NP/Na compound cocatalysts. The as-prepared sensing layer was proven to be practically effective for direct, and quantitative halitosis analysis based on the correlation (accuracy = 86.3%) between the H₂S concentration measured using the direct breath signals obtained by our test device (80 cases) and gas chromatography. This study offers possibilities for direct, highly reliable and rapid detection of H₂S in real human breath without the need of any collection or filtering equipment.

Highly sensitive and fast-response hydrogen sensing of WO3 nanoparticles via palladium reined spillover effect

Hydrogen sensing simultaneously endowed with fast response, high sensitivity and selectivity is highly desired in detecting hydrogen leakages such as in hydrogen-driven vehicles and space rockets. Here, hydrogen sensing reined via a hydrogen spillover effect has been developed using palladium nanoparticles photochemically decorated on WO₃ nanoparticles (Pd-NPs@WO₃-NPs). Theoretically, the Pd-NP catalysts and WO₃-NP support are used to construct the hydrogen spillover system, in which Pd NPs possess high catalytic activity, promoting the electron transfer and therefore the reaction kinetics. Beneficially, the Pd-NPs@WO₃-NP sensor prototypes toward 500 ppm hydrogen simultaneously exhibit fast response time (∼1.2 s), high response (R_a/R_g = 22 867) and selectivity at a working temperature of 50 °C. Such advanced hydrogen sensing provides an experimental basis for the smart detection of hydrogen leakage in the future hydrogen economy.

Socio-economic demands and challenges for non-invasive disease diagnosis through a portable breathalyzer by the incorporation of 2D nanosheets and SMO nanocomposites

Breath analysis for non-invasive clinical diagnostics and treatment progression has penetrated the research community owing to the technological developments in novel sensing nanomaterials. The trace level selective detection of volatile organic compounds (VOCs) in breath facilitates the study of physiological disorder and real-time health monitoring. This review focuses on advancements in chemiresistive gas sensor technology for biomarker detection associated with different diseases. Emphasis is placed on selective biomarker detection by semiconducting metal oxide (SMO) nanostructures, 2-dimensional nanomaterials (2DMs) and nanocomposites through various optimization strategies and sensing mechanisms. Their synergistic properties for incorporation in a portable breathalyzer have been elucidated. Furthermore, the socio-economic demands of a breathalyzer in terms of recent establishment of startups globally and challenges of a breathalyzer are critically reviewed. This initiative is aimed at highlighting the challenges and scope for improvement to realize a high performance chemiresistive gas sensor for non-invasive disease diagnosis.

Breath analysis for non-invasive clinical diagnostics and treatment progression has penetrated the research community owing to the technological developments in novel sensing nanomaterials.

Electrospun Metal Oxide Nanofibers and Their Conductometric Gas Sensor Application. Part 1: Nanofibers and Features of Their Forming

Electrospun metal oxide nanofibers, due to their unique structural and electrical properties, are now being considered as materials with great potential for gas sensor applications. This critical review attempts to assess the feasibility of these perspectives. The article in Part 1 discusses the basic principles of electrospinning and the features of the formation of metal oxide nanofibers using this method. Approaches to optimization of nanofibers’ parameters important for gas sensor application are also considered.

Recent Progress of Toxic Gas Sensors Based on 3D Graphene Frameworks

Air pollution is becoming an increasingly important global issue. Toxic gases such as ammonia, nitrogen dioxide, and volatile organic compounds (VOCs) like phenol are very common air pollutants. To date, various sensing methods have been proposed to detect these toxic gases. Researchers are trying their best to build sensors with the lowest detection limit, the highest sensitivity, and the best selectivity. As a 2D material, graphene is very sensitive to many gases and so can be used for gas sensors. Recent studies have shown that graphene with a 3D structure can increase the gas sensitivity of the sensors. The limit of detection (LOD) of the sensors can be upgraded from ppm level to several ppb level. In this review, the recent progress of the gas sensors based on 3D graphene frameworks in the detection of harmful gases is summarized and discussed.

Recent Progress in Graphene Derivatives/Metal Oxides Binary Nanocomposites Based Chemi-resistive Sensors for Disease Diagnosis by Breath Analysis

Background::

The scientific and clinical interest of breath analysis for non-invasive disease diagnosis has been focused by the scientific community over the past decade. This was due to the exhalation of prominent volatile organic compounds (VOCs) corresponding to the metabolic activities in the body and their concentration variation. To identify these biomarkers, various analytical techniques have been used in the past and the threshold concentration was established between a healthy and diseased state. Subsequently, various nanomaterials-based gas sensors were explored for their demand in quantifying these biomarkers for real-time, low cost and portable breathalyzers along with the essential sensor performances.

Methods::

We focus on the classification of graphene derivatives and their composites’ gas sensing efficiency for the application in the development of breathalyzers. The review begins with the feasibility of the application of nanomaterial gas sensors for healthcare applications. Then, we systematically report the gas sensing performance of various graphene derivatives/semiconductor metal oxides (SMO) binary nanocomposites and their optimizing strategies in selective detection of biomarkers specific to diseases. Finally, we provide insights on the challenges, opportunity and future research directions for the development of breathalyzers using other graphene derivatives/SMO binary nanocomposites.

Results::

On the basis of these analyses, graphene and its derivatives/metal oxides based binary nanocomposites have been a choice for gas sensing material owing to their high electrical conductivity and extraordinary thickness-dependent physicochemical properties. Moreover, the presence of oxygen vacancies in SMO does not only alter the conductivity but also accelerates the carrier transport rate and influence the adsorption behavior of target analyte on the sensing materials. Hence researchers are exploring the search of ultrathin graphene and metal oxide counterpart for high sensing performances.

Conclusion::

Their impressive properties compared to their bulk counterpart have been uncovered towards sensitive and selective detection of biomarkers for its use in portable breathalyzers.

Chemiresistive Hydrogen Sensors: Fundamentals, Recent Advances, and Challenges

Hydrogen (H₂) is one of the next-generation energy sources because it is abundant in nature and has a high combustion efficiency that produces environmentally benign products (H₂O). However, H₂/air mixtures are explosive at H₂ concentrations above 4%, thus any leakage of H₂ must be rapidly and reliably detected at much lower concentrations to ensure safety. Among the various types of H₂ sensors, chemiresistive sensors are one of the most promising sensing systems due to their simplicity and low cost. This review highlights the advances in H₂ chemiresistors, including metal-, semiconducting metal oxide-, carbon-based materials, and other materials. The underlying sensing mechanisms for different types of materials are discussed, and the correlation of sensing performances with nanostructures, surface chemistry, and electronic properties is presented. In addition, the discussion of each material emphasizes key advances and strategies to develop superior H₂ sensors. Furthermore, recent key advances in other types of H₂ sensors are briefly discussed. Finally, the review concludes with a brief outlook, perspective, and future directions.

Precision pH Sensor Based on WO3 Nanofiber-Polymer Composites and Differential Amplification

We report a new type of potentiometric pH sensor with sensitivity exceeding the theoretical Nernstian behavior (-59.1 mV/pH). For the pH-sensitive electrode, 1D tungsten oxide (WO₃) nanofibers (NFs) were prepared to obtain large surface area and high porosity. These NFs were then stabilized in a reactive porous chloromethylated triptycene poly(ether sulfone) (Cl-TPES) binder, to facilitate proton diffusion into the polymer membrane. The measurements were performed with a differential amplifier using matched MOSFETs and providing a 10-fold amplified signal over a simple potentiometric determination. A high pH sensitivity of -377.5 mV/pH and a linearity of 0.9847 were achieved over the pH range of 6.90-8.94. Improved signal-to-noise ratios with large EMF signal changes of 175 mV were obtained in artificial seawater ranging pH 8.07-7.64 (ΔpH = 0.43), which demonstrates a practical application for pH monitoring in ocean environments.

Porous reduced graphene oxide (rGO)/WO3 nanocomposites for the enhanced detection of NH3 at room temperature

Incorporation of reduced graphene oxide (rGO) modifies the properties of semiconducting metal oxide nanoparticles and makes it possible to tune the surface area and pore size to optimum values, which in turn improves their gas sensing properties. In this work, to improve the ammonia (NH₃) gas sensing characteristics, reduced graphene oxide (rGO) was incorporated into tungsten oxide (WO₃) nanospheres using a simple ultrasonication method. The rGO-WO₃ nanocomposites exhibited porous nanosheets with nanospherical WO₃ as observed with field-emission scanning electron microscopy (FE-SEM). The oxidation state of the rGO-WO₃ nanocomposite was determined using X-ray photoelectron spectroscopy (XPS). Three ratios of (1, 5 and 10% rGO/WO₃) nanocomposites and pure WO₃ showed good selectivity towards NH₃ at 10-100 ppm, and more remarkably at room temperature in the range of about 32-35 °C and at a relative humidity (RH) of 55%. The limit of detection (LOD) of the synthesized rGO-WO₃ nanocomposites was 1.14 ppm, which will highly favour low detection ranges of NH₃. The sensor response was 1.5 times higher than that of the bare WO₃ nanospheres. The sensors showed excellent selectivity, ultrafast response/recovery times (18/24 s), reproducibility and stability even after one month of their preparation. We believe that metal oxides using the rGO modifier can improve the sensitivity and reduce the LOD towards NH₃ and can be used effectively in real-time environmental monitoring.

Ultrafine nanoparticles of W-doped SnO2 for durable H2S sensors with fast response and recovery

Ultrafine nanoparticles of W-doped SnO2 with an average diameter of 6 nm were fabricated via a facile hydrothermal method. The material shows a reduced particle size and enhanced response to H2S gas as compared to the pristine SnO2 nanoparticles. The detection limit can be down to 100 ppb while the response time and recovery time of the 5%-doped one are reduced to 17 s and 7 s respectively. In addition, the material shows impressive long-term stability of the response through 40 cycles of injection with 10 ppm H2S, which is attractive for designing a durable hydrogen sulfide sensor. The doping of W results in the reduction of size and modification of the electronic band structure of SnO2, which reduces the response time and recovery time and further improves the sensing durability of the materials.

Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials

Electrically-transduced sensors, with their simplicity and compatibility with standard electronic technologies, produce signals that can be efficiently acquired, processed, stored, and analyzed. Two dimensional (2D) nanomaterials, including graphene, phosphorene (BP), transition metal dichalcogenides (TMDCs), and others, have proven to be attractive for the fabrication of high-performance electrically-transduced chemical sensors due to their remarkable electronic and physical properties originating from their 2D structure. This review highlights the advances in electrically-transduced chemical sensing that rely on 2D materials. The structural components of such sensors are described, and the underlying operating principles for different types of architectures are discussed. The structural features, electronic properties, and surface chemistry of 2D nanostructures that dictate their sensing performance are reviewed. Key advances in the application of 2D materials, from both a historical and analytical perspective, are summarized for four different groups of analytes: gases, volatile compounds, ions, and biomolecules. The sensing performance is discussed in the context of the molecular design, structure-property relationships, and device fabrication technology. The outlook of challenges and opportunities for 2D nanomaterials for the future development of electrically-transduced sensors is also presented.

Bioinspired Cocatalysts Decorated WO3 Nanotube Toward Unparalleled Hydrogen Sulfide Chemiresistor

Herein, we incorporated dual biotemplates, i.e., cellulose nanocrystals (CNC) and apoferritin, into electrospinning solution to achieve three distinct benefits, i.e., (i) facile synthesis of a WO₃ nanotube by utilizing the self-agglomerating nature of CNC in the core of as-spun nanofibers, (ii) effective sensitization by partial phase transition from WO₃ to Na₂W₄O₁₃ induced by interaction between sodium-doped CNC and WO₃ during calcination, and (iii) uniform functionalization with monodispersive apoferritin-derived Pt catalytic nanoparticles (2.22 ± 0.42 nm). Interestingly, the sensitization effect of Na₂W₄O₁₃ on WO₃ resulted in highly selective H₂S sensing characteristics against seven different interfering molecules. Furthermore, synergistic effects with a bioinspired Pt catalyst induced a remarkably enhanced H₂S response ( R_air/ R_gas = 203.5), unparalleled selectivity ( R_air/ R_gas < 1.3 for the interfering molecules), and rapid response (<10 s)/recovery (<30 s) time at 1 ppm of H₂S under 95% relative humidity level. This work paves the way for a new class of cosensitization routes to overcome critical shortcomings of SMO-based chemical sensors, thus providing a potential platform for diagnosis of halitosis.

Facile Synthesis of Pt-Functionalized Meso/Macroporous SnO2 Hollow Spheres through in Situ Templating with SiO2 for H2S Sensors

Although single-nozzle electrospraying seems a versatile technique in the synthesis of spherical semiconducting metal oxide structures, the synthesized structures find limited use in gas-sensing applications because of their thick and dense morphology, which minimizes the accessibility of their inner surfaces. Herein, unprecedented spherical SiO₂@SnO₂ core-shell structures are synthesized upon calcination of single-nozzle as-electrosprayed spheres (SPs) containing tin (Sn) and silicon (Si) precursors. Subsequent etching of SiO₂ in NaOH (pH 12) affords meso/macroporous SnO₂ hollow spheres (HSPs) with short diffusion length (31.4 ± 3.1 nm), small crystallites (15.5 nm), and large Brunauer-Emmett-Teller surface area (124.8 m² g^-1). Apart from surface meso/macropores, diffusion of gases into porous SnO₂ sensing layers is realized through inner interconnection of voids of the SnO₂ HSPs into a three-dimensional network. Functionalization of the postetched SnO₂ HSPs with platinum (Pt) nanoparticles at 0.08 wt % yields gas-sensing materials with outstanding response ( R_a/ R_g = 1.6, 10.8, and 105.1-0.1, 1, and 5 ppm of H₂S, respectively) and selectivity toward H₂S against interfering gas molecules at 250 °C. The SiO₂ phase in the postcalcined SiO₂@SnO₂ SPs acts as a sacrificial template for pore creation and crystal growth inhibition, whereas the small amount of SiO₂ residues in HSPs enhances the selectivity.

Hollow Pt-Functionalized SnO2 Hemipill Network Formation Using a Bacterial Skeleton for the Noninvasive Diagnosis of Diabetes

Hollow-structured nanomaterials are presented as an outstanding sensing platform because of their unique combination of high porosity in both the micro- and nanoscale, their biocompatibility, and flexible template applicability. Herein, we introduce a bacterial skeleton method allowing for cost-effective fabrication with nanoscale precision. As a proof-of-concept, we fabricated a hollow SnO₂ hemipill network (HSHN) and a hollow Pt-functionalized SnO₂ hemipill network (HPN). A superior detecting capability of HPN toward acetone, a diabetes biomarker, was demonstrated at low concentration (200 ppb) under high humidity (RH 80%). The detection limit reaches 3.6 ppb, a level satisfying the minimum requirement for diabetes breath diagnosis. High selectivity of the HPN sensor against C₆H₆, C₇H₈, CO, and NO vapors is demonstrated using principal component analysis (PCA), suggesting new applications of HPN for human-activity monitoring and a personal healthcare tool for diagnosing diabetes. The skeleton method can be further employed to mimic nanostructures of biomaterials with unique functionality for broad applications.

Flexible Graphene-Based Wearable Gas and Chemical Sensors

Wearable electronics is expected to be one of the most active research areas in the next decade; therefore, nanomaterials possessing high carrier mobility, optical transparency, mechanical robustness and flexibility, lightweight, and environmental stability will be in immense demand. Graphene is one of the nanomaterials that fulfill all these requirements, along with other inherently unique properties and convenience to fabricate into different morphological nanostructures, from atomically thin single layers to nanoribbons. Graphene-based materials have also been investigated in sensor technologies, from chemical sensing to detection of cancer biomarkers. The progress of graphene-based flexible gas and chemical sensors in terms of material preparation, sensor fabrication, and their performance are reviewed here. The article provides a brief introduction to graphene-based materials and their potential applications in flexible and stretchable wearable electronic devices. The role of graphene in fabricating flexible gas sensors for the detection of various hazardous gases, including nitrogen dioxide (NO₂), ammonia (NH₃), hydrogen (H₂), hydrogen sulfide (H₂S), carbon dioxide (CO₂), sulfur dioxide (SO₂), and humidity in wearable technology, is discussed. In addition, applications of graphene-based materials are also summarized in detecting toxic heavy metal ions (Cd, Hg, Pb, Cr, Fe, Ni, Co, Cu, Ag), and volatile organic compounds (VOCs) including nitrobenzene, toluene, acetone, formaldehyde, amines, phenols, bisphenol A (BPA), explosives, chemical warfare agents, and environmental pollutants. The sensitivity, selectivity and strategies for excluding interferents are also discussed for graphene-based gas and chemical sensors. The challenges for developing future generation of flexible and stretchable sensors for wearable technology that would be usable for the Internet of Things (IoT) are also highlighted.

MOFs for the Sensitive Detection of Ammonia: Deployment of fcu-MOF Thin Films as Effective Chemical Capacitive Sensors

This work reports on the fabrication and deployment of a select metal-organic framework (MOF) thin film as an advanced chemical capacitive sensor for the sensing/detection of ammonia (NH₃) at room temperature. Namely, the MOF thin film sensing layer consists of a rare-earth (RE) MOF (RE-fcu-MOF) deposited on a capacitive interdigitated electrode (IDE). Purposely, the chemically stable naphthalene-based RE-fcu-MOF (NDC-Y-fcu-MOF) was elected and prepared/arranged as a thin film on a prefunctionalized capacitive IDE via the solvothermal growth method. Unlike earlier realizations, the fabricated MOF-based sensor showed a notable detection sensitivity for NH₃ at concentrations down to 1 ppm, with a detection limit appraised to be around 100 ppb (at room temperature) even in the presence of humidity and/or CO₂. Distinctly, the NDC-Y-fcu-MOF based sensor exhibited the required stability to NH₃, in contrast to other reported MOFs, and a remarkable detection selectivity toward NH₃ vs CH₄, NO₂, H₂, and C₇H₈. The NDC-Y-fcu-MOF based sensor exhibited excellent performance for sensing ammonia for simulated breathing system in the presence of the mixture of carbon dioxide and/or humidity (water vapor), with no major alteration in the detection signal.

Microwave-Assisted Synthesis of Graphene-SnO2 Nanocomposites and Their Applications in Gas Sensors

We obtained extremely high and selective sensitivity to NO₂ gas by fabricating graphene-SnO₂ nanocomposites using a commercial microwave oven. Structural characterization revealed that the products corresponded to agglomerated structures of graphene and SnO₂ particles, with small secondary SnO_x (x ≤ 2) nanoparticles deposited on the surfaces. The overall oxygen atomic ratio was decreased with the appearance of an SnO_x (x < 2) phase. By the microwave treatment of graphene-SnO₂ nanocomposites, with the graphene promoting efficient transport of the microwave energy, evaporation and redeposition of SnO_x nanoparticles were facilitated. The graphene-SnO₂ nanocomposites exhibited a high sensor response of 24.7 for 1 ppm of NO₂ gas, at an optimized temperature of 150 °C. The graphene-SnO₂ nanocomposites were selectively sensitive to NO₂ gas, in comparison with SO₂, NH₃, and ethanol gases. We suggest that the generation of SnO_x nanoparticles and the SnO_x phase in the matrix results in the formation of SnO₂/SnO₂ homojunctions, SnO₂/SnO_x (x < 2) heterojunctions, and SnO₂/graphene heterojunctions, which are responsible for the excellent sensitivity of the graphene-SnO₂ nanocomposites to NO₂ gas. In addition, the generation of surface Sn interstitial defects is also partly responsible for the excellent NO₂ sensing performance observed in this study.

Hierarchical NiO Cube/Nitrogen-Doped Reduced Graphene Oxide Composite with Enhanced H2S Sensing Properties at Low Temperature

A novel hierarchical NiO cube (hc-NiO)/nitrogen-doped reduced graphene oxide (N-rGO) composite is synthesized via a facile hydrothermal method and a postcalcination treatment without any templates and surfactants added. The NiO cubes assembled by abundant nanoparticles in situ grow on the surface of N-rGO layers. The combination of hc-NiO and N-rGO results in enhanced sensing properties with the contributions of the N-rGO providing high specific surface area and more efficient active sites for the adsorption of H₂S molecules and the hierarchically structured NiO cubes providing high sensitivity and distinctive selectivity to H₂S gas. At the optimal operating temperature of 92 °C, the hc-NiO/N-rGO composite based sensor shows not only high response to H₂S in a range of 0.1-100 ppm but also excellent selectivity for H₂S against the other seven gases. The gaseous product, produced from the contact of H₂S with the hc-NiO/N-rGO composite at 92 °C, is measured by GC-MS technique. The change of the surface composition and the chemical state of the hc-NiO/N-rGO composite before and after exposure to H₂S are investigated by XPS. The possible sensing mechanism of the hc-NiO/N-rGO composite is similar to that of semiconductor oxides. The H₂S molecules that absorbed on the sensor surface transform to SO₂ by reacting with the adsorbed oxygen anions. Meanwhile, the electrons restricted by the surface-adsorbed oxygen return to the bulk and neutralize the holes, producing a change in resistance.

Innovative Nanosensor for Disease Diagnosis

As a futuristic diagnosis platform, breath analysis is gaining much attention because it is a noninvasive, simple, and low cost diagnostic method. Very promising clinical applications have been demonstrated for diagnostic purposes by correlation analysis between exhaled breath components and specific diseases. In addition, diverse breath molecules, which serve as biomarkers for specific diseases, are precisely identified by statistical pattern recognition studies. To further improve the accuracy of breath analysis as a diagnostic tool, breath sampling, biomarker sensing, and data analysis should be optimized. In particular, development of high performance breath sensors, which can detect biomarkers at the ppb-level in exhaled breath, is one of the most critical challenges. Due to the presence of numerous interfering gas species in exhaled breath, selective detection of specific biomarkers is also important. This Account focuses on chemiresistive type breath sensors with exceptionally high sensitivity and selectivity that were developed by combining hollow protein templated nanocatalysts with electrospun metal oxide nanostructures. Nanostructures with high surface areas are advantageous in achieving high sensitivity because the sensing signal is dominated by the surface reaction between the sensing layers and the target biomarkers. Furthermore, macroscale pores between one-dimensional (1D) nanostructures can facilitate fast gas diffusion into the sensing layers. To further enhance the selectivity, catalytic functionalization of the 1D metal oxide nanostructure is essential. However, the majority of conventional techniques for catalytic functionalization have failed to achieve a high degree of dispersion of nanoscale catalysts due to aggregation on the surface of the metal oxide, which severely deteriorates the sensing properties by lowering catalytic activity. This issue has led to extensive studies on monolithically dispersed nanoscale particles on metal oxides to maximize the catalytic performances. As a pioneering technique, a bioinspired templating route using apoferritin, that is, a hollow protein cage, has been proposed to obtain nanoscale (∼2 nm) catalyst particles with high dispersity. Nanocatalysts encapsulated by a protein shell were first used in chemiresistive type breath sensors for catalyst functionalization on 1D metal oxide structures. We discuss the robustness and versatility of the apoferrtin templating route for creating highly dispersive catalytic NPs including single components (Au, Pt, Pd, Rh, Ag, Ru, Cu, and La) and bimetallic catalysts (PtY and PtCo), as well as the core-shell structure of Au-Pd (Au-core@Pd-shell). The use of these catalysts is essential to establish high performance sensors arrays for the pattern recognition of biomarkers. In addition, novel multicomponent catalysts provide unprecedented sensitivity and selectivity. With this in mind, we discuss diverse synthetic routes for nanocatalysts using apoferritin and the formation of various catalyst-1D metal oxide composite nanostructures. Furthermore, we discuss detection capability of a simulated biomarker gas using the breath sensor arrays and principal component analysis. Finally, future prospects with the portable breath analysis platform are presented by demonstrating the potential feasibility of real-time and on-site breath analysis using chemiresistive sensors.

Graphene-loaded tin oxide nanofibers: optimization and sensing performance

We investigated the gas sensing characteristics of graphene nanosheet (NS)-loaded SnO₂ nanofibers (NFs) that were synthesized by a low-cost facile electrospinning process. The sensing performance was characterized as a function of the graphene content with various gases such as C₆H₆, C₇H₈, CO, CO₂, and H₂S. The loading of graphene NSs significantly improved the gas sensing performances of SnO₂ NFs. The optimal amount of graphene NSs was found to be 0.5 wt%. We proposed a sensing mechanism for the enhanced sensing performance based on the chemical sensitization of graphene NSs and the charge transfer through the heterointerfaces between graphene NSs and SnO₂ nanograins. The results show that graphene NS-loaded SnO₂ NFs are a promising sensing material system that can detect hazardous gaseous species.

Silver Nanowire Embedded Colorless Polyimide Heater for Wearable Chemical Sensors: Improved Reversible Reaction Kinetics of Optically Reduced Graphene Oxide

Optically reduced graphene oxide (ORGO) sheets are successfully integrated on silver nanowire (Ag NW)-embedded transparent and flexible substrate. As a heating element, Ag NWs are embedded in a colorless polyimide (CPI) film by covering Ag NW networks using polyamic acid and subsequent imidization. Graphene oxide dispersed aqueous solution is drop-coated on the Ag NW-embedded CPI (Ag NW-CPI) film and directly irradiated by intense pulsed light to obtain ORGO sheets. The heat generation property of Ag NW-CPI film is investigated by applying DC voltage, which demonstrates unprecedentedly reliable and stable characteristics even in dynamic bending condition. To demonstrate the potential application in wearable chemical sensors, NO₂ sensing characteristic of ORGO is investigated with respect to the different heating temperature (22.7-71.7 °C) of Ag NW-CPI film. The result reveals that the ORGO sheets exhibit high sensitivity of 2.69% with reversible response/recovery sensing properties and minimal deviation of baseline resistance of around 1% toward NO₂ molecules when the temperature of Ag NW-CPI film is 71.7 °C. This work first demonstrates the improved reversible NO₂ sensing properties of ORGO sheets on flexible and transparent Ag NW-CPI film assisted by Ag NW heating networks.

Mesoporous WO3 Nanofibers with Protein-Templated Nanoscale Catalysts for Detection of Trace Biomarkers in Exhaled Breath

Highly selective detection, rapid response (<20 s), and superior sensitivity (Rair/Rgas> 50) against specific target gases, particularly at the 1 ppm level, still remain considerable challenges in gas sensor applications. We propose a rational design and facile synthesis concept for achieving exceptionally sensitive and selective detection of trace target biomarkers in exhaled human breath using a protein nanocage templating route for sensitizing electrospun nanofibers (NFs). The mesoporous WO3 NFs, functionalized with well-dispersed nanoscale Pt, Pd, and Rh catalytic nanoparticles (NPs), exhibit excellent sensing performance, even at parts per billion level concentrations of gases in a humid atmosphere. Functionalized WO3 NFs with nanoscale catalysts are demonstrated to show great promise for the reliable diagnosis of diseases.

Coaxial electrospinning of WO3 nanotubes functionalized with bio-inspired Pd catalysts and their superior hydrogen sensing performance

Macroporous WO3 nanotubes (NTs) functionalized with nanoscale catalysts were fabricated using coaxial electrospinning combined with sacrificial templating and protein-encapsulated catalysts. The macroporous thin-walled nanotubular structures were obtained by introducing colloidal polystyrene (PS) particles to a shell solution of W precursor and poly(vinylpyrrolidone). After coaxial electrospinning with a core liquid of mineral oil and subsequent calcination, open pores with an average diameter of 173 nm were formed on the surface of WO3 NTs due to decomposition of the PS colloids. In addition, catalytic Pd nanoparticles (NPs) were synthesized using bio-inspired protein cages, i.e., apoferritin, and uniformly dispersed within the shell solution and subsequently on the WO3 NTs. The resulting Pd functionalized macroporous WO3 NTs were demonstrated to be high performance hydrogen (H2) sensors. In particular, Pd-functionalized macroporous WO3 NTs exhibited a very high H2 response (Rair/Rgas) of 17.6 at 500 ppm with a short response time. Furthermore, the NTs were shown to be highly selective for H2 compared to other gases such as carbon monoxide (CO), ammonia (NH3), and methane (CH4). The results demonstrate a new synthetic method to prepare highly porous nanotubular structures with well-dispersed nanoscale catalysts, which can provide improved microstructures for chemical sensing.

Heterogeneous WSx/WO₃ Thorn-Bush Nanofiber Electrodes for Sodium-Ion Batteries

Heterogeneous electrode materials with hierarchical architectures promise to enable considerable improvement in future energy storage devices. In this study, we report on a tailored synthetic strategy used to create heterogeneous tungsten sulfide/oxide core-shell nanofiber materials with vertically and randomly aligned thorn-bush features, and we evaluate them as potential anode materials for high-performance Na-ion batteries. The WSx (2 ≤ x ≤ 3, amorphous WS3 and crystalline WS2) nanofiber is successfully prepared by electrospinning and subsequent calcination in a reducing atmosphere. To prevent capacity degradation of the WSx anodes originating from sulfur dissolution, a facile post-thermal treatment in air is applied to form an oxide passivation surface. Interestingly, WO3 thorn bundles are randomly grown on the nanofiber stem, resulting from the surface conversion. We elucidate the evolving morphological and structural features of the nanofibers during post-thermal treatment. The heterogeneous thorn-bush nanofiber electrodes deliver a high second discharge capacity of 791 mAh g(-1) and improved cycle performance for 100 cycles compared to the pristine WSx nanofiber. We show that this hierarchical design is effective in reducing sulfur dissolution, as shown by cycling analysis with counter Na electrodes.

WO3 Nanofiber-Based Biomarker Detectors Enabled by Protein-Encapsulated Catalyst Self-Assembled on Polystyrene Colloid Templates

A novel catalyst functionalization method, based on protein-encapsulated metallic nanoparticles (NPs) and their self-assembly on polystyrene (PS) colloid templates, is used to form catalyst-loaded porous WO3 nanofibers (NFs). The metallic NPs, composed of Au, Pd, or Pt, are encapsulated within a protein cage, i.e., apoferritin, to form unagglomerated monodispersed particles with diameters of less than 5 nm. The catalytic NPs maintain their nanoscale size, even following high-temperature heat-treatment during synthesis, which is attributed to the discrete self-assembly of NPs on PS colloid templates. In addition, the PS templates generate open pores on the electrospun WO3 NFs, facilitating gas molecule transport into the sensing layers and promoting active surface reactions. As a result, the Au and Pd NP-loaded porous WO3 NFs show superior sensitivity toward hydrogen sulfide, as evidenced by responses (R(air)/R(gas)) of 11.1 and 43.5 at 350 °C, respectively. These responses represent 1.8- and 7.1-fold improvements compared to that of dense WO3 NFs (R(air)/R(gas) = 6.1). Moreover, Pt NP-loaded porous WO3 NFs exhibit high acetone sensitivity with response of 28.9. These results demonstrate a novel catalyst loading method, in which small NPs are well-dispersed within the pores of WO3 NFs, that is applicable to high sensitivity breath sensors.

A Review on Graphene-Based Gas/Vapor Sensors with Unique Properties and Potential Applications

Graphene-based gas/vapor sensors have attracted much attention in recent years due to their variety of structures, unique sensing performances, room-temperature working conditions, and tremendous application prospects, etc. Herein, we summarize recent advantages in graphene preparation, sensor construction, and sensing properties of various graphene-based gas/vapor sensors, such as NH3, NO2, H2, CO, SO2, H2S, as well as vapor of volatile organic compounds. The detection mechanisms pertaining to various gases are also discussed. In conclusion part, some existing problems which may hinder the sensor applications are presented. Several possible methods to solve these problems are proposed, for example, conceived solutions, hybrid nanostructures, multiple sensor arrays, and new recognition algorithm.

Ribbon-like and spontaneously folded structures of tungsten oxide nanofibers fabricated via electrospinning

Electrospinning of sub-100 nm thick WO₃ ribbon-like nanofibers and their periodically folded patterns is reported for the first time.