Fabrication of Nb2O5 nanosheets for high-rate lithium ion storage applications

Polymorphs of Nb2O5 Compound and Their Electrical Energy Storage Applications

Niobium pentoxide (Nb2O5), as an important dielectric and semiconductor material, has numerous crystal polymorphs, higher chemical stability than water and oxygen, and a higher melt point than most metal oxides. Nb2O5 materials have been extensively studied in electrochemistry, lithium batteries, catalysts, ionic liquid gating, and microelectronics. Nb2O5 polymorphs provide a model system for studying structure-property relationships. For example, the T-Nb2O5 polymorph has two-dimensional layers with very low steric hindrance, allowing for rapid Li-ion migration. With the ever-increasing energy crisis, the excellent electrical properties of Nb2O5 polymorphs have made them a research hotspot for potential applications in lithium-ion batteries (LIBs) and supercapacitors (SCs). The basic properties, crystal structures, synthesis methods, and applications of Nb2O5 polymorphs are reviewed in this article. Future research directions related to this material are also briefly discussed.

Black Phosphorus Degradation during Intercalation and Alloying in Batteries

Numerous layered materials are being recognized as promising candidates for high-performance alkali-ion battery anodes, but black phosphorus (BP) has received particular attention. This is due to its high specific capacity, due to a mixed alkali-ion storage mechanism (intercalation-alloying), and fast alkali-ion transport within its layers. Unfortunately, BP based batteries are also commonly associated with serious irreversible losses and poor cycling stability. This is known to be linked to alloying, but there is little experimental evidence of the morphological, mechanical, or chemical changes that BP undergoes in operational cells and thus little understanding of the factors that must be mitigated to optimize performance. Here the degradation mechanisms of BP alkali-ion battery anodes are revealed through operando electrochemical atomic force microscopy (EC-AFM) and ex situ spectroscopy. Among other phenomena, BP is observed to wrinkle and deform during intercalation but suffers from complete structural breakdown upon alloying. The solid electrolyte interphase (SEI) is also found to be unstable, nucleating at defects before spreading across the basal planes but then disintegrating upon desodiation, even above alloying potentials. By directly linking these localized phenomena with the whole-cell performance, we can now engineer stabilizing protocols for next-generation high-capacity alkali-ion batteries.

Pseudohexagonal Nb2O5 Anodes for Fast-Charging Potassium-Ion Batteries

High-rate batteries will play a vital role in future energy storage systems, yet while good progress is being made in the development of high-rate lithium-ion batteries, there is less progress with post-lithium-ion chemistry. In this study, we demonstrate that pseudohexagonal Nb₂O₅(TT-Nb₂O₅) can offer a high specific capacity (179 mAh g^-1 ∼ 0.3C), good lifetime, and an excellent rate performance (72 mAh g^-1 at ∼15C) in potassium-ion batteries (KIBs), when it is composited with a highly conductive carbon framework; this is the first reported investigation of TT-Nb₂O₅ for KIBs. Specifically, multiwalled carbon nanotubes are strongly tethered to Nb₂O₅ via glucose-derived carbon (Nb₂O₅@CNT) by a one-step hydrothermal method, which results in highly conductive and porous needle-like structures. This work therefore offers a route for the scalable production of a viable KIB anode material and hence improves the feasibility of fast-charging KIBs for future applications.

Heterostructured and Mesoporous Nb2O5@TiO2 Core-Shell Spheres as the Negative Electrode in Li-Ion Batteries

Niobium pentoxides have received considerable attention and are promising anode materials for lithium-ion batteries (LIBs), due to their fast Li storage kinetics and high capacity. However, their cycling stability and rate performance are still limited owing to their intrinsic insulating properties and structural degradation during charging and discharging. Herein, a series of mesoporous Nb₂O₅@TiO₂ core-shell spherical heterostructures have been prepared for the first time by a sol-gel method and investigated as anode materials in LIBs. Mesoporosity can provide numerous open and short pathways for Li⁺ diffusion; meanwhile, heterostructures can simultaneously enhance the electronic conductivity and thus improve the rate capability. The TiO₂ coating layer shows robust crystalline skeletons during repeated lithium insertion and extraction processes, retaining high structural integrity and, thereby, enhancing cycling stability. The electrochemical behavior is strongly dependent on the thickness of the TiO₂ layer. After optimization, a mesoporous Nb₂O₅@TiO₂ core-shell structure with a ∼13 nm thick TiO₂ layer delivers a high specific capacity of 136 mA h g^-1 at 5 A g^-1 and exceptional cycling stability (88.3% retention over 1000 cycles at 0.5 A g^-1). This work provides a facile strategy to obtain mesoporous Nb₂O₅@TiO₂ core-shell spherical structures and underlines the importance of structural engineering for improving the performance of battery materials.

Exploring 2D Energy Storage Materials: Advances in Structure, Synthesis, Optimization Strategies, and Applications for Monovalent and Multivalent Metal-Ion Hybrid Capacitors

The design and development of advanced energy storage devices with good energy/power densities and remarkable cycle life has long been a research hotspot. Metal-ion hybrid capacitors (MHCs) are considered as emerging and highly prospective candidates deriving from the integrated merits of metal-ion batteries with high energy density and supercapacitors with excellent power output and cycling stability. The realization of high-performance MHCs needs to conquer the inevitable imbalance in reaction kinetics between anode and cathode with different energy storage mechanisms. Featured by large specific surface area, short ion diffusion distance, ameliorated in-plane charge transport kinetics, and tunable surface and/or interlayer structures, 2D nanomaterials provide a promising platform for manufacturing battery-type electrodes with improved rate capability and capacitor-type electrodes with high capacity. In this article, the fundamental science of 2D nanomaterials and MHCs is first presented in detail, and then the performance optimization strategies from electrodes and electrolytes of MHCs are summarized. Next, the most recent progress in the application of 2D nanomaterials in monovalent and multivalent MHCs is dealt with. Furthermore, the energy storage mechanism of 2D electrode materials is deeply explored by advanced characterization techniques. Finally, the opportunities and challenges of 2D nanomaterials-based MHCs are prospected.

Nb2CTx MXene Cathode for High-Capacity Rechargeable Aluminum Batteries with Prolonged Cycle Lifetime

Aluminum-ion batteries have garnered significant interest as a potentially safer and cheaper replacement for conventional lithium-ion batteries, offering a shorter charging time and denser storage capacity. Nonetheless, the progress in this field is considerably hampered by the limited availability of suitable cathode materials that can sustain the reversible intercalation of Al³⁺/[AlCl₄]^- ions, particularly after long cycles. Herein, we demonstrate that rechargeable Al batteries embedded with two-dimensional (2D) Nb₂CT_x MXene as a cathode material exhibit excellent capacity and exceptional long cyclic performance. We have successfully improved the initial electrochemical performance of Nb₂CT_x MXene after being properly delaminated to a single-layered microstructure and subjected to a post-synthesis calcining treatment. Compared to pristine Nb₂CT_x MXene, the Al battery embedded with the calcined Nb₂CT_x MXene cathode has, respectively, retained high capacities of 108 and 80 mAh g^-1 after 500 cycles at current densities of 0.2 and 0.5 A g^-1 in a wide voltage window (0.1-2.4 V). Noteworthily, the cyclic lifetime of Nb₂CT_x MXene was extended from ∼300 to >500 times after calcination. We reveal that attaining Nb₂CT_x nanosheets with a controllable d-spacing has promoted the migration of the [AlCl₄]^- and Al³⁺ ions in the MXene interlayers, leading to enhanced charge storage. Furthermore, we found out that the formation of niobium oxides and amorphous carbon after calcination probably benefits the electrochemical performance of Nb₂CT_x MXene electrode in Al batteries.

The role of 2D material families in energy harvesting: An editorial overview

The ever increasing proportion of an energy consuming society and the boost in industrialization accelerated the depletion of fossil fuel based energy sources at an alarming rate. This emphasizes the necessity of sustainable energy generation and storage to meet the daily energy demands. But, these alternative renewable energy sources like solar and wind power are intermittent and highly depend on weather, place and individuals. This creates the inevitability of suitable energy storage devices like batteries and supercapacitors. The interfacing of energy storing devices is required to maintain the supply chain equilibrium, power efficiency, regulate power fluctuations and reduce pollution. Besides, the boom in electric mobility and consumer electronics also require uninterrupted power supply. Hence, in the upcoming years the energy storing devices play a vital role in addressing the energy crisis. Innovations in new materials and technologies will be the core area of research and development in the coming future. 2D materials like graphene,transition metal carbides and nitrides (MXenes), transition metal borides (MBenes) and so on are the new class of materials among them MXenes are getting more attention in energy storage owing to its exceptional properties.

In Situ Orthorhombic to Amorphous Phase Transition of Nb2O5 and Its Temperature Effect on Pseudocapacitive Behavior

Niobium pentoxide (Nb₂O₅) represents an exquisite class of negative electrode materials with unique pseudocapacitive kinetics that engender superior power and energy densities for advanced electrical energy storage devices. Practical energy devices are expected to maintain stable performance under real-world conditions such as temperature fluctuations. However, the intercalation pseudocapacitive behavior of Nb₂O₅ at elevated temperatures remains unexplored because of the scarcity of suitable electrolytes. Thus, in this study, we investigate the effect of temperature on the pseudocapacitive behavior of submicron-sized Nb₂O₅ in a wide potential window of 0.01-2.3 V. Furthermore, ex situ X-ray diffraction and X-ray photoelectron spectroscopy reveal the amorphization of Nb₂O₅ accompanied by the formation of NbO via a conversion reaction during the initial cycle. Subsequent cycles yield enhanced performance attributed to a series of reversible Nb^V, IV/Nb^III redox reactions in the amorphous Li_xNb₂O₅ phase. Through cyclic voltammetry and symmetric cell electrochemical impedance spectroscopy, temperature elevation is noted to increase the pseudocapacitive contribution of the Nb₂O₅ electrode, resulting in a high rate capability of 131 mAh g^-1 at 20,000 mA g^-1 at 90 °C. The electrode further exhibits long-term cycling over 2000 cycles and high Coulombic efficiency ascribed to the formation of a robust, [FSA]^--originated solid-electrolyte interphase during cycling.

Nb2O5-Based Photocatalysts

Photocatalysis is one potential solution to the energy and environmental crisis and greatly relies on the development of the catalysts. Niobium pentoxide (Nb2O5), a typically nontoxic metal oxide, is eco-friendly and exhibits strong oxidation ability, and has attracted considerable attention from researchers. Furthermore, unique Lewis acid sites (LASs) and Brønsted acid sites (BASs) are observed on Nb2O5 prepared by different methods. Herein, the recent advances in the synthesis and application of Nb2O5-based photocatalysts, including the pure Nb2O5, doped Nb2O5, metal species supported on Nb2O5, and other composited Nb2O5 catalysts, are summarized. An overview is provided for the role of size and crystalline phase, unsaturated Nb sites and oxygen vacancies, LASs and BASs, dopants and surface metal species, and heterojunction structure on the Nb2O5-based catalysts in photocatalysis. Finally, the challenges are also presented, which are possibly overcome by integrating the synthetic methodology, developing novel photoelectric characterization techniques, and a profound understanding of the local structure of Nb2O5.

Oxide-Based Electrolyte-Gated Transistors for Spatiotemporal Information Processing

Spiking neural networks (SNNs) sharing large similarity with biological nervous systems are promising to process spatiotemporal information and can provide highly time- and energy-efficient computational paradigms for the Internet-of-Things and edge computing. Nonvolatile electrolyte-gated transistors (EGTs) provide prominent analog switching performance, the most critical feature of synaptic element, and have been recently demonstrated as a promising synaptic device. However, high performance, large-scale EGT arrays, and EGT application for spatiotemporal information processing in an SNN are yet to be demonstrated. Here, an oxide-based EGT employing amorphous Nb₂ O₅ and Li_x SiO₂ is introduced as the channel and electrolyte gate materials, respectively, and integrated into a 32 × 32 EGT array. The engineered EGTs show a quasi-linear update, good endurance (10⁶ ) and retention, a high switching speed of 100 ns, ultralow readout conductance (<100 nS), and ultralow areal switching energy density (20 fJ µm^-2 ). The prominent analog switching performance is leveraged for hardware implementation of an SNN with the capability of spatiotemporal information processing, where spike sequences with different timings are able to be efficiently learned and recognized by the EGT array. Finally, this EGT-based spatiotemporal information processing is deployed to detect moving orientation in a tactile sensing system. These results provide an insight into oxide-based EGT devices for energy-efficient neuromorphic computing to support edge application.

Recent Developments of Nanomaterials and Nanostructures for High-Rate Lithium Ion Batteries

Lithium ion batteries have been considered as a promising energy-storage solution, the performance of which depends on the electrochemical properties of each component, including cathode, anode, electrolyte and separator. Currently, fast charging is becoming an attractive research field due to the widespread application of batteries in electric vehicles, which are designated to replace conventional diesel automobiles in the future. In these batteries, rate capability, which is closely linked to the topology and morphology of electrode materials, is one of the determining parameters of interest. It has been revealed that nanotechnology is an exceptional tool in designing and preparing cathodes and anodes with outstanding electrochemical kinetics due to the well-known nanosizing effect. Nevertheless, the negative effects of applying nanomaterials in electrodes sometimes outweigh the benefits. To better understand the exact function of nanostructures in solid-state electrodes, herein, a comprehensive review is provided beginning with the fundamental theory of lithium ion transport in solids, which is then followed by a detailed analysis of several major factors affecting the migration of lithium ions in solid-state electrodes. The latest developments in characterisation techniques, based on either electrochemical or radiology methodologies, are covered as well. In addition, state-of-the-art research findings are provided to illustrate the effect of nanomaterials and nanostructures in promoting the rate performance of lithium ion batteries. Finally, several challenges and shortcomings of applying nanotechnology in fabricating high-rate lithium ion batteries are summarised.

Surfactant-Free Synthesis of Nb2O5 Nanoparticles Anchored Graphene Nanocomposites with Enhanced Electrochemical Performance for Supercapacitor Electrodes

Nb₂O₅/graphene nanocomposites without any surfactant are synthesized by an in situ microwave irradiation technique. Structural and morphological studies revealed that the prepared composites were composed of Nb₂O₅ nanoparticles intercalated into the graphene sheet. The thermal stability of graphene oxide, Nb₂O₅, and Nb₂O₅/graphene nanocomposite was studied by the TGA. The electrochemical properties are assessed by cyclic voltammetry, chronopotentiometry and electrochemical impedance spectroscopy analyses. The specific capacitance of Nb₂O₅/graphene nanocomposites is greater (633 Fg⁻¹) than pure Nb₂O₅ nanoparticles (221 Fg⁻¹) and graphene (290 Fg⁻¹) at a current density of 1 Ag⁻¹. The long-term cyclic measurement confirms higher cyclic stability of the nanocomposite with capacitance retention of 99.3% after 5000 cycles without performance degradation. The composites exhibit higher electrochemical conductivity and allow effective ions and charge transport over the entire electrode surface with aqueous electrolyte. The electrochemical study suggests that Nb₂O₅/graphene nanocomposites have the potential to be an effective electrode for superior performance supercapacitor applications.

Coupling Niobia Nanorods with a Multicomponent Carbon Network for High Power Lithium-Ion Batteries

High power lithium-ion batteries require highly conductive electrodes. For an active electrode material that has limited electron conductivity, it is critical to build a carbon network that is not only highly conductive itself but also highly compatible with the electroactive material for efficient interfacial charge transfer. Herein, we design a multicomponent carbon network that is optimized for electrical coupling with the electroactive Nb₂O₅ nanorods for efficient electron injection. The self-support electrode is constructed by using 0D polypyrrole-derived (Ppy) carbon nanoparticles as glue to bind the Nb₂O₅ nanorods with 1D carbon nanotubes (CNTs) and 2D graphene nanosheets (GNSs). The 0D carbon nanoparticles also cross-link 1D CNTs with 2D GNSs, which can effectively prevent the GNSs from aggregation and form the 3D CNT/GNS network that provides continuous electronic and ionic pathways. This 3D Nb₂O₅@C self-support electrode exhibits a high discharge capacity of 246.3 mA h g^-1 at 0.5 C and 100 mA h g^-1 at 20 C and excellent Coulombic efficiency of 99.98% at 20 C. Even increasing the mass loading to 7.1 mg cm^-2, the Nb₂O₅@C electrode can still reach a discharge capacity of 172.4 mA h g^-1 at 0.5 C after 100 cycles. A high power density of 1043 W kg^-1 can be achieved at an energy density of 104.3 W h kg^-1 based on the electrode weight, which is among the highest values demonstrated so far for Nb₂O₅ electrodes. The results pave the way toward practical applications of Nb₂O₅ anodes in high-power lithium-ion batteries.

Pseudocapacitive performance of binder-free nanostructured TT-Nb2O5/FTO electrode in aqueous electrolyte

TT-Nb₂O₅ nanoparticles grown on electrically conducting fluorine-doped tin oxide (FTO) glass were successfully synthesized by a facile one-pot hydrothermal method at low temperature. The as-prepared nanostructured TT-Nb₂O₅/FTO was directly used as the working electrode to investigate its pseudocapacitive performance without any binder or conductive agent, which exhibited a high specific capacitance of 322 F g^-1 at a current density of 3.68 A g^-1, excellent rate capability (258.1 F g^-1 at a high scan rate of 100 mV s^-1 is about 91.6% of that at 5 mV s^-1), and good cycling stability (the capacitance retention is 74.3% after 3000 cycles). More importantly, it is the first time electrochemical measurements for Nb₂O₅ electrode in aqueous electrolyte, which are low-cost and easy to operate, have been carried out.

Urchin-like hierarchical H-Nb2O5 microspheres: synthesis, formation mechanism and their applications in lithium ion batteries

Urchin-like hierarchical Nb₂O₅ microspheres are successfully synthesized through a facile solvothermal method in glycerol-isopropanol mixed media followed by thermal treatment. The sample is characterized by XRD, FESEM, TEM, HRTEM, BET, and XPS, and the results reveal that the as-formed Nb₂O₅ microspheres have a pseudohexagonal structure and are composed of nanorods with an average diameter of ca. 20 nm. It is found that glycerol not only serves as a solvent but also acts as a reactant; furthermore, isopropanol plays an important part in the morphologies of the products. When used as anodic materials for lithium ion batteries, the Nb₂O₅ microspheres deliver initial discharge capacities of 201.7, 159.7, 148.5, 123.7, and 98.5 mA h g^-1 at the current densities of 0.5, 1, 2, 5, and 10C, respectively. Additionally, the discharge capacity of Nb₂O₅ remains at 105.5 mA h g^-1 even after 500 cycles at a high rate of 5C. The good electrochemical properties of the products may be ascribed to their large surface areas and hierarchical structures.

T-Nb2O5 nanoparticle enabled pseudocapacitance with fast Li-ion intercalation

Orthorhombic Nb₂O₅ (T-Nb₂O₅) nanocrystallites are successfully fabricated through an evaporation induced self-assembly (EISA) method guided by a commercialised triblock copolymer - Pluronic F127. We demonstrate a morphology transition of T-Nb₂O₅ from continuous porous nanofilms to monodisperse nanoparticles by changing the content of Pluronic F127. The electrochemical results show that the optimized monodisperse Nb-2 with a particle size of 20 nm achieves premier Li-ion intercalation kinetics and higher rate capability than mesoporous T-Nb₂O₅ nanofilms. Nb-2 presents an initial intercalation capacity of 528 and 451 C g^-1 at current densities of 0.5 and 5 A g^-1 and exhibited a stable capacity of 499 C g^-1 after 300 charge/discharge cycles and 380 C g^-1 after 1000 cycles, respectively. We would expect this copolymer guided monodispersion of T-Nb₂O₅ nanoparticles with high Li⁺ intercalation performance to open up a new window for novel EES technologies.

Free-anchored Nb2O5@graphene networks for ultrafast-stable lithium storage

Orthorhombic Nb₂O₅ (T-Nb₂O₅) has structural merit but poor electrical conductivity, limiting their applications in energy storage. Although graphene is frequently adopted to effectively improve its electrochemical properties, the ordinary modified methods cannot meet the growing demands for high-performance. Here, we demonstrate that different graphene modified routes play a vital role in affecting the electrochemical performances of T-Nb₂O₅. By only manual shaking within one minute, Nb₂O₅ nano-particles can be rapidly adsorbed onto graphene, then the free-anchored T-Nb₂O₅@graphene three-dimensional networks can be successfully prepared based on hydrogel method. As for the application in lithium-ion batteries, it performs outstanding rate character (129 mA h g^-1 (25C rate), 110 mA h g^-1 (50C rate) and 90 mA h g^-1 (100C rate), correspond to 79%, 67% and 55% capacity of 0.5C rate, respectively) and excellent long-term cycling feature (∼70% capacity retention after 20000 cycles). Moreover, it still maintains similar ultrafast-stable lithium storage performances when Cu foil is substituted by Al foil as current collector. In addition, relevant kinetics mechanisms are also expounded. This work provides a versatile strategy for the preparation of graphene modified Nb₂O₅ or other types of nanoparticles.

T-Nb2 O5 /C Nanofibers Prepared through Electrospinning with Prolonged Cycle Durability for High-Rate Sodium-Ion Batteries Induced by Pseudocapacitance

Homogeneous ultrasmall T-Nb₂ O₅ nanocrystallites encapsulated in 1D carbon nanofibers (T-Nb₂ O₅ /CNFs) are prepared through electrospinning followed by subsequent pyrolysis treatment. In a Na half-cell configuration, the obtained T-Nb₂ O₅ /CNFs with the merits of unique microstructures and inherent pseudocapacitance, deliver a stable capacity of 150 mAh g^-1 at 1 A g^-1 over 5000 cycles. Even at an ultrahigh charge-discharge rate of 8 A g^-1 , a high reversible capacity of 97 mAh g^-1 is still achieved. By means of kinetic analysis, it is demonstrated that the larger ratio of surface Faradaic reactions of Nb₂ O₅ at high rates is the major factor to achieve excellent rate performance. The prolonged cycle durability and excellent rate performance endows T-Nb₂ O₅ /CNFs with potentials as anode materials for sodium-ion batteries.

Heterogeneous TiO2@Nb2O5 composite as a high-performance anode for lithium-ion batteries

Heterogeneous TiO₂@Nb₂O₅ composites, in which TiO₂ nanoparticles were evenly embedded on ultrathin Nb₂O₅ nanosheets, were used as anode materials for LIBs and demonstrated high capacities and excellent rate capability. For instance, this material displayed large capacities of 166.3 and 129.1 mA h g⁻¹ at current densities of 1 A g⁻¹ after 100 cycles and 5 A g⁻¹ after 300 cycles, respectively.

Nb2O5 microstructures: a high-performance anode for lithium ion batteries

We report the synthesis of three-dimensional (3D) urchin-like Nb₂O₅ microstructures by a facile hydrothermal approach with subsequent annealing treatment. As anode materials for lithium-ion batteries, the 3D urchin-like Nb₂O₅ microstructures exhibit superior electrochemical performance with excellent rate capability as well as long-term cycling stability. The electrode delivers high capacity of 131 mA h g^-1 after 1000 cycles at a high current density of 1 A g^-1. The excellent electrochemical performance suggests the 3D urchin-like Nb₂O₅ microstructures may be a promising anode candidate for high-power lithium ion batteries.

Partially Single-Crystalline Mesoporous Nb2 O5 Nanosheets in between Graphene for Ultrafast Sodium Storage

Partially single-crystalline mesoporous Nb2 O5 nanosheets with orthorhombic structure in between graphene are scalably fabricated via a simple nanocasting method. The well-designed architecture provides numerous open and short channels for fast diffusion of sodium ion and good electronic conductivity, resulting in an enhanced electrochemical performance and a favorable high-rate behavior for sodium storage.

High-Rate Intercalation without Nanostructuring in Metastable Nb2O5 Bronze Phases

Nanostructuring and nanosizing have been widely employed to increase the rate capability in a variety of energy storage materials. While nanoprocessing is required for many materials, we show here that both the capacity and rate performance of low-temperature bronze-phase TT- and T-polymorphs of Nb2O5 are inherent properties of the bulk crystal structure. Their unique "room-and-pillar" NbO6/NbO7 framework structure provides a stable host for lithium intercalation; bond valence sum mapping exposes the degenerate diffusion pathways in the sites (rooms) surrounding the oxygen pillars of this complex structure. Electrochemical analysis of thick films of micrometer-sized, insulating niobia particles indicates that the capacity of the T-phase, measured over a fixed potential window, is limited only by the Ohmic drop up to at least 60C (12.1 A·g(-1)), while the higher temperature (Wadsley-Roth, crystallographic shear structure) H-phase shows high intercalation capacity (>200 mA·h·g(-1)) but only at moderate rates. High-resolution (6/7)Li solid-state nuclear magnetic resonance (NMR) spectroscopy of T-Nb2O5 revealed two distinct spin reservoirs, a small initial rigid population and a majority-component mobile distribution of lithium. Variable-temperature NMR showed lithium dynamics for the majority lithium characterized by very low activation energies of 58(2)-98(1) meV. The fast rate, high density, good gravimetric capacity, excellent capacity retention, and safety features of bulk, insulating Nb2O5 synthesized in a single step at relatively low temperatures suggest that this material not only is structurally and electronically exceptional but merits consideration for a range of further applications. In addition, the realization of high rate performance without nanostructuring in a complex insulating oxide expands the field for battery material exploration beyond conventional strategies and structural motifs.

Recent advances in nanostructured Nb-based oxides for electrochemical energy storage

For the past five years, nanostructured niobium-based oxides have emerged as one of the most prominent materials for batteries, supercapacitors, and fuel cell technologies, for instance, TiNb2O7 as an anode for lithium-ion batteries (LIBs), Nb2O5 as an electrode for supercapacitors (SCs), and niobium-based oxides as chemically stable electrochemical supports for fuel cells. Their high potential window can prevent the formation of lithium dendrites, and their rich redox chemistry (Nb(5+)/Nb(4+), Nb(4+)/Nb(3+)) makes them very promising electrode materials. Their unique chemical stability under acid conditions is favorable for practical fuel-cell operation. In this review, we summarized recent progress made concerning the use of niobium-based oxides as electrodes for batteries (LIBs, sodium-ion batteries (SIBs), and vanadium redox flow batteries (VRBs)), SCs, and fuel cell applications. Moreover, crystal structures, charge storage mechanisms in different crystal structures, and electrochemical performances in terms of the specific capacitance/capacity, rate capability, and cycling stability of niobium-based oxides are discussed. Insights into the future research and development of niobium-based oxide compounds for next-generation electrochemical devices are also presented. We believe that this review will be beneficial for research scientists and graduate students who are searching for promising electrode materials for batteries, SCs, and fuel cells.

New architecture of a petal-shaped Nb2O5 nanosheet film on FTO glass for high photocatalytic activity

A petal-shaped Nb₂O₅ nanosheet thin film was grown directly on FTO glass substrate via a facile hydrothermal method. The petal-shaped Nb₂O₅ nanosheet array film without annealing showed excellent photocatalytic activity for degrading aqueous rhodamine B.

One-step synthesis of Nb-doped TiO2 rod@Nb2O5 nanosheet core–shell heterostructures for stable high-performance lithium-ion batteries

Conceptually novel Nb-doped TiO₂@Nb₂O₅ core–shell heterostructures were obtained by one-step hydrothermal synthesis through sequential growth of Nb-doped TiO₂ core and Nb₂O₅ shell structures.

A core–shell Si@Nb2O5 composite as an anode material for lithium-ion batteries

Si@Nb₂O₅ with high electrochemical stability is fabricated via solvothermal method with silicon nanoparticle and NbCl₅ as the precursors in ethyl alcohol.

In situ study on the charge/discharge of nanocrystalline Li2C2 as a new cathode material

The nanocrystalline Li₂C₂ has a high initial discharge capacity of 352 mA h g⁻¹ and is promising as a new alloy-type cathode material.

Free-Standing T-Nb₂O₅/Graphene Composite Papers with Ultrahigh Gravimetric/Volumetric Capacitance for Li-Ion Intercalation Pseudocapacitor

Free-standing electrodes with high gravimetric/volumetric capacitance will open up potential applications in miniaturized consumer electronics. Herein, we report a simple synthesis technology of free-standing orthorhombic Nb2O5 (T-Nb2O5)/graphene composite papers for Li-intercalating pseudocapacitive electrodes. Through a facile polyol-mediated solvothermal reaction, the Nb2O5 nanodots are homogeneously decorated onto the surface of reduced graphite oxide (rGO), which can form a homogeneous Nb2O5/rGO colloidal suspension that can be easily fabricated into flexible composite papers. The heat-treated T-Nb2O5/graphene composite papers exhibit a nanoporous layer-stacked structure with good ionic-electric conductive pathways, high T-Nb2O5 loading of 74.2%, and high bulk density of 1.55 g cm(-3). Such T-Nb2O5/graphene composite papers show a superior pseudocapacitor performance as free-standing electrodes, as evidenced by an ultrahigh gravimetric/volumetric capacitance (620.5 F g(-1) and 961.8 F cm(-3) at 1 mV s(-1)) and excellent rate capability. Furthermore, an organic electrolyte-based asymmetric supercapacitor is assembled based on T-Nb2O5/graphene composite papers, which can deliver a high energy density of 47 W h kg(-1) and power density of 18 kW kg(-1).