Light illuminated α-Fe2O3/Pt nanoparticles as water activation agent for photoelectrochemical water splitting

Role of Pt and PtO2 in the Oxygen-Evolution Reaction in the Presence of Iron under Alkaline Conditions

The oxygen-evolution reaction (OER) through water oxidation is an inevitable reaction for water splitting toward storing energy. However, OER is a four-electron and slow reaction, which is also a bottleneck for water splitting. To find the role of Pt and PtO₂ on the OER in the presence of Fe, the electrochemistry of Pt foil and PtO₂ is investigated in the absence/presence of K₂FeO₄ as a soluble Fe salt at pH ≈ 13. After the addition of K₂FeO₄, a remarkable increase in the OER is recorded in the presence of Pt or PtO₂. The obtained catalysts were characterized by operando visible spectroscopy, high-resolution transmission electron microscopy, scanning electron microscopy, electron-spin resonance spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and electrochemical methods. KOH solutions usually contain Fe and/or Ni impurities. It is found that neither Pt nor PtO₂ is an OER catalyst in a Ni/Fe-free KOH, and even at an overpotential of 570 mV in purified KOH (pH ≈ 13), no clear OER was observed.

Hydrothermal Synthesis of FeOOH and Fe2O3 Modified Self-Organizing Immobilized TiO2 Nanotubes for Photocatalytic Degradation of 1H-Benzotriazole

In this study, titanium dioxide nanotubes were prepared by electrochemical anodization technique and modified with an aqueous solution of FeCl3 using hydrothermal synthesis method to control the amount and distribution of iron compounds on the anatase TiO2 nanotubes. The objective was to synthesize immobilized FeOOH@TiO2 or Fe2O3@TiO2 photocatalysts designed for the flow-through reactor systems; to investigate thermal treatment effect on the photocatalytic efficiency; to determine appropriate Fe-compounds concentration for the maximum photocatalytic activity improvement, and to explain the mechanism responsible for the enhancement. The photocatalysts were tested for the degradation of 1H-benzotriazole in water under UV/solar light irradiation. Up to two times increase in the photocatalytic activity was obtained when TiO2 nanotubes were modified with 0.8 mM Fe. At higher Fe concentrations (8 mM and 80 mM), the photocatalytic activity of the given photocatalysts decreased. To confirm the formation of FeOOH or Fe2O3 species, and to clarify the mechanism of photoactivity, X-ray diffraction (XRD), Raman spectroscopy (RS), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray spectroscopy (EDS) and UV-Vis spectroscopy were used.

Fabrication of Hybrid Catalyst ZnO Nanorod/α-Fe2O3 Composites for Hydrogen Evolution Reaction

This report presents the synthesis of ZnO nanorod/α-Fe2O3 composites by the hydrothermal method with different weight percentages of α-Fe2O3 nanoparticles. The as-synthesized nanorod composites were characterized by different techniques, such as X-ray diffraction (XRD), Fourier transform-infrared (FT-IR), field emission scanning electron microscopy (FE-SEM), electrochemical impedance spectroscopy (EIS), and X-ray photoelectron spectroscopy (XPS). From our results, it was found that the ZnO/α-Fe2O3 (3 wt%) nanorod composites exhibit a higher hydrogen evolution reaction (HER) activity when compared to other composites. The synergetic effect between ZnO and (3 wt%) of α-Fe2O3 nanocomposites resulted in a low onset potential of −125 mV, which can effectively produce more H2 than pure ZnO. The H2 production rate over the composite of ZnO/α-Fe2O3 (3 wt%) clearly shows a significant improvement in the photocatalytic activity in the heterojunction of the ZnO nanorods and α-Fe2O3 nanoparticles on nickel foam.

Ultrathin Assembles of Porous Array for Enhanced H2 Evolution

Since the complexity of photocatalyst synthesis process and high cost of noble cocatalyst leftovers a major hurdle to producing hydrogen (H₂) from water, a noble metal-free Ni-Si/MgO photocatalyst was realized for the first time to generate H₂ effectively under illumination with visible light. The catalyst was produced by means of simple one-pot solid reaction using self-designed metal reactor. The physiochemical properties of photocatalyst were identified by XRD, FESEM, HRTEM, EDX, UV-visible, XPS, GC and PL. The photocatalytic activities of Ni-Si/MgO photocatalyst at different nickel concentrations were evaluated without adjusting pH, applied voltage, sacrificial agent or electron donor. The ultrathin-nanosheet with hierarchically porous structure of catalyst was found to exhibit higher photocatalytic H₂ production than hexagonal nanorods structured catalyst, which suggests that the randomly branched nanosheets are more active surface to increase the light-harvesting efficiency due to its short electron diffusion path. The catalyst exhibited remarkable performance reaching up to 714 µmolh⁻¹ which is higher among the predominant semiconductor catalyst. The results demonstrated that the photocatalytic reaction irradiated under visible light illumination through the production of hydrogen and hydroxyl radicals on metals. The outcome indicates an important step forward one-pot facile approach to prepare noble ultrathin photocatalyst for hydrogen production from water.

Low field magneto-tunable photocurrent in CoFe2O4 nanostructure films for enhanced photoelectrochemical properties

Efficient solar to hydrogen conversion using photoelectrochemical (PEC) process requires semiconducting photoelectrodes with advanced functionalities, while exhibiting high optical absorption and charge transport properties. Herein, we demonstrate magneto-tunable photocurrent in CoFe₂O₄ nanostructure film under low applied magnetic fields for efficient PEC properties. Photocurrent is enhanced from ~1.55 mA/cm² to ~3.47 mA/cm² upon the application of external magnetic field of 600 Oe leading to ~123% enhancement. This enhancement in the photocurrent is attributed to the reduction of optical bandgap and increase in the depletion width at CoFe₂O₄/electrolyte interface resulting in an enhanced generation and separation of the photoexcited charge carriers. The reduction of optical bandgap in the presence of magnetic field is correlated to the shifting of Co²⁺ ions from octahedral to tetrahedral sites which is supported by the Raman spectroscopy results. Electrochemical impedance spectroscopy results confirm a decrease in the charge transfer resistance at the CoFe₂O₄/electrolyte interface in the presence of magnetic field. This work evidences a coupling of photoexcitation properties with magnetic properties of a ferromagnetic-semiconductor and the effect can be termed as magnetophototronic effect.

Sunlight-Induced photochemical synthesis of Au nanodots on α-Fe2O3@Reduced graphene oxide nanocomposite and their enhanced heterogeneous catalytic properties

In this present study, we report the synthesis of Au nanodots on α-Fe₂O₃@reduced graphene oxide (RGO) based hetero-photocatalytic nanohybrids through a chlorophyll mediated photochemical synthesis. In this process, chlorophyll induces a rapid reduction (30 min) of Au³⁺ ions to Au° metallic nanodots on α-Fe₂O₃@RGO surface under sunlight irradiation. The nucleation growth process, photo-induced electron-transfer mechanism and physico-chemical properties of the Au@α-Fe₂O₃@RGO ternary nanocomposites were systematically studied with various analytical techniques. This novel photochemical synthesis process is a cost-effective, convenient, surfactant-less, and scalable method. Moreover, the prepared ternary nanocomposites enhanced catalytic activity as compared to pure α-Fe₂O₃ and α-Fe₂O₃@RGO. The advantages and synergistic effect of Au@α-Fe₂O₃@RGO exhibit, (i) a broader range of visible-light absorption due to visible light band gap of α-Fe₂O₃, (ii) lower recombination possibility of photo-generated electrons and holes due to effect of Au and (iii) faster electron transfer due to higher conductivity of RGO. Therefore, the prepared Au@α-Fe₂O₃@RGO hetero-photocatalytic nanohybrids exhibited a remarkable photocatalytic activity, thus enabling potential active hetero-photocatalyst for industrial and environmental applications.

Bottom-up meets top-down: tailored raspberry-like Fe3O4-Pt nanocrystal superlattices

Supported catalysts are widely used in industry and can be optimized by tuning the composition, chemical structure, and interface of the nanoparticle catalyst and oxide support. Here we firstly combine a bottom up colloidal synthesis method with a top down atomic layer deposition (ALD) process to achieve a raspberry-like Pt-decorated Fe3O4 (Fe3O4-Pt) nanoparticle superlattices. This nanocomposite ensures the precision of the catalyst/support interface, improving the catalytic efficiency of the Fe3O4-Pt nanocomposite system. The morphology of the hybrid nanocomposites resulting from different cycles of ALD was monitored by scanning transmission electron microscopy, giving insight into the nucleation and growth mechanism of the ALD process. X-ray photoelectron spectroscopy studies confirm the anticipated electron transfer from Fe3O4 to Pt through the nanocomposite interface. Photocurrent measurement further suggests that Fe3O4 superlattices with controlled decoration of Pt have substantial promise for energy-efficient photoelectrocatalytic oxygen evolution reaction. This work opens a new avenue for designing supported catalyst architectures via precisely controlled decoration of single component superlattices with noble metals.

Heterojunctions of silver–iron oxide on graphene for laser-coupled oxygen reduction reactions

We report a two-step hybridization of N-doped graphene and Ag-decorated Fe₂O₃ hematite to realize a balanced oxygen adsorption/desorption equilibrium and a laser-coupled ORR (LORR).

Molybdenum Oxides - From Fundamentals to Functionality

The properties and applications of molybdenum oxides are reviewed in depth. Molybdenum is found in various oxide stoichiometries, which have been employed for different high-value research and commercial applications. The great chemical and physical characteristics of molybdenum oxides make them versatile and highly tunable for incorporation in optical, electronic, catalytic, bio, and energy systems. Variations in the oxidation states allow manipulation of the crystal structure, morphology, oxygen vacancies, and dopants, to control and engineer electronic states. Despite this overwhelming functionality and potential, a definitive resource on molybdenum oxide is still unavailable. The aim here is to provide such a resource, while presenting an insightful outlook into future prospective applications for molybdenum oxides.

Synergistic photocatalysis of Cr(VI) reduction and 4-Chlorophenol degradation over hydroxylated α-Fe2O3 under visible light irradiation

A series of Fe2O3 materials with hydroxyl are synthesized in different monohydric alcohol (C2-C5) solvents by solvothermal method and characterized by XRD, BET, XPS, TG and EA. The amount of hydroxyl is demonstrated to be emerged on the surface of the as-synthesized Fe2O3 particles and their contents are determined to be from 7.99 to 3.74 wt%. The Cr(VI) reduction experiments show that the hydroxyl content of Fe2O3 samples exacts great influence on the photocatalytic activity under visible light irradiation (λ>400 nm) and that the Fe2O3 sample synthesized in n-butyl alcohol exhibits the optimal photocatalytic activity. The synergistic photocatalysis for 4-Chlorophenol (4-CP) degradation and Cr(VI) reduction over above Fe2O3 sample is further investigated. The photocatalytic ratio of Cr(VI) reduction are enhanced from 24.8% to 70.2% while that of 4-CP oxidation are increased from 13.5% to 47.8% after 1 h visible light irradiation. The Fe2O3 sample keeps good degradation rates of mixed pollutants after 9 runs. The active oxygen intermediates O2(-)˙, ˙OH and H2O2 formed in the photoreaction process are discovered by ESR measurement and UV-vis test. The photocatalytic degradation mechanism is proposed accordingly.

Au–Pd bimetallic nanoparticles anchored on α-Fe2O3 nonenzymatic hybrid nanoelectrocatalyst for simultaneous electrochemical detection of dopamine and uric acid in the presence of ascorbic acid

We have found that magnetic α-Fe₂O₃ nanocubes exhibit an intrinsic catalytic activity toward the electrochemical sensing of dopamine (DA) and uric acid (UA) in the presence of ascorbic acid.

The (0001) surfaces of α-Fe2O3 nanocrystals are preferentially activated for water oxidation by Ni doping

A modification process on hematite nanoplates leads to controlled surface area ratio of (0001) facets and Ni-doped surfaces. Electrochemical testing shows the enhancement of water oxidation activity by Ni-doping increases as the surface area ratio of (0001) facets increases.