Biomass-derived functional porous carbons as novel electrode material for the practical detection of biomolecules in human serum and snail hemolymph

Biomass-Derived Carbon Materials for Electrochemical Sensing: Recent Advances and Future Perspectives

In recent years, biomass carbon materials have received widespread attention in the field of electrochemical sensors. As a new type of renewable green energy, biomass carbon has the advantages of low cost and abundant resources. After special treatment, it can be used as an ideal electrode material. Since biomass carbon materials have diverse sources and their morphology is difficult to control, researchers have conducted in-depth research on their preparation process, morphology regulation and application. This review summarizes different biomass carbon structures and their preparation methods and explores the applications of these materials in electrochemical sensors. Modification of biomass carbon materials through pretreatment, physical and chemical activation, heteroatom doping, metal compound composite and other methods can make up for the deficiencies in its pore structure, electrical conductivity and surface wettability, thereby improving its electrochemical performance. The effects of different biomass sources, functional groups, constituent elements and modification methods on the morphology, structure and electrochemical properties of biomass carbon materials are discussed, and the applications of this type of material in biological molecules, heavy metal ions and pesticide residues are reviewed. Biomass carbon-based materials show great application potential and development prospects in the field of electrochemical sensors.

Waste-derived carbon nanostructures (WD-CNs): An innovative step toward waste to treasury

With the growing population, the accumulation of waste materials (WMs) (industrial/household waste) in the environment incessantly increases, affecting human health. Additionally, it affects the climate and ecosystem of terrestrial and water habitats, thereby needing effective management technology to control environmental pollution. In this aspect, managing these WMs to develop products that mitigate the associated issues is necessary. Researchers continue to focus on WMs management by adopting a circular economy. These WMs convert into useful/value-added products such as polymers and nanomaterials (NMs), especially carbon nanomaterials (CNs). The conversion/transformation of waste material into useful products is one of the best solutions for managing waste. Waste-derived CNs (WD-CNs) have established boundless promises for numerous applications like environmental remediation, energy, catalysts, sensors, and biomedical applications. This review paper discusses the several sources of waste material (agricultural, plastic, industrial, biomass, and other) transforming into WD-CNs, such as carbon nanotubes (CNTs), biochar, graphene, carbon nanofibers (CNFs), carbon dots, etc., are extensively elaborated and their application. The impact of metal doping within the WD-CNs is briefly discussed, along with their applicability to end applications.

Graphdiyne chelated AuNPs for ultrasensitive electrochemical detection of tyrosine

Tyrosine (Tyr) is a kind of amino acid that can regulate emotions and stimulate the nervous system, and it is of great importance to realize its ultrasensitive detection. A unique material of graphdiyne chelated AuNPs (GDY@AuNPs) is designed and developed to realize high-performance electrochemical sensing of Tyr. GDY promotes the absorption of Tyr via π-π interaction, and its CC strongly chelates with AuNPs for greatly improved sensitivity. GDY@AuNPs delivers a sensitivity of up to 181.2 μA mM-1 cm-2 and a wide range of 0.1-600 μM, among the best for carbon or AuNPs-based materials for the detection of Tyr. It demonstrates the accurate detection of Tyr in human sweat for potential practical applications.

Sensitive dual-mode detection of carbendazim by molecularly imprinted electrochemical sensor based on biomass-derived carbon-loaded gold nanoparticles

A dual-mode electrochemical sensor was fabricated for carbendazim (CBD) detection. Biomass-derived carbon loaded gold nanoparticles (AuNPs/BC) were firstly coated on a glassy carbon electrode (GCE), and then molecularly imprinted polymer (MIP) of o-aminophenol was prepared on the resulting AuNPs/BC/GCE through electrochemical method in the presence of CBD. The AuNPs/BC had excellent conductivity, large surface and good electrocatalysis, while the imprinted film presented good recognition. Thus, the obtained MIP/AuNPs/BC/GCE exhibited sensitive current response to CBD. Furthermore, the sensor displayed good impedance response to CBD. Hence, a dual-mode detection platform for CBD was established. Under optimum conditions, the linear response ranges were as wide as 1.0 nM - 15 μM (by differential pulse voltammetry, DPV) and 1.0 nM - 10 μM (by electrochemical impedance spectroscopy, EIS), and the detection limits for these two methods were as low as 0.30 nM (S/N = 3) and 0.24 nM (S/N = 3), respectively. The sensor also had high selectivity, stability and reproducibility. The sensor was applied to detect CBD in spiked real samples, including cabbage, peach, apple and lake water, and the recoveries were 85.8-108% (by DPV) and 91.4-110% (by EIS); the relative standard deviations (RSD) were 3.4-5.3% (by DPV) and 3.7-5.1% (by EIS), respectively. The results were consistent with that obtained by high-performance liquid chromatography. Therefore, this sensor is a simple and effective tool for CBD detection, and it has good application potential.

The Application of the Activated Carbon from Cordia africana Leaves for Adsorption of Chromium (III) from an Aqueous Solution

The objective of this study is to investigate the adsorption performance of activated carbon derived from the leaves of Cordia africana for the removal of Cr (III) from an aqueous solution. The plant sample was collected, washed, dried, grounded, and sieved at 125 μm mesh size. Adsorbent activation was done using H3PO4 at concentrations of 25–85% and pyrolysis temperature of 400–500°C. The activated carbon was characterized by proximate, SEM, BET, and FTIR analyses. A batch adsorption study was conducted to determine the effect of contact time, adsorbent dose, initial chromium concentration, and mixing speed on Cr (III) removal. The regeneration of the activated carbon was investigated by using 1 M of HNO3 as a desorbing solution for seven cycles. At optimum acid concentration and pyrolysis temperature, a surface area of 700 m2/g was recorded. The moisture content, volatile matter, ash composition, fixed carbon, and bulk density of the activated carbon were found to be 5.3%, 24.2%, 6.2%, 64.3%, and 0.75 g/mL, respectively. The SEM and FTIR analyses indicated that the surface morphology was full of cracks and different peaks were associated with plenty of functional groups, respectively. The maximum Cr (III) removal was attained at a contact time of 180 min (89%), adsorbent dose of 1.5 g (54%), initial concentration of 0.6 g/L (47%), and mixing speed of 300 rpm (64%). The equilibrium data were better described by Freundlich isotherm at R2 value of 0.88, which implies that the adsorption process is conducted on a heterogeneous surface. The pseudo-first-order kinetics model with R2 value of 0.99 best fits with the equilibrium data, which implies that physisorption controls the adsorption kinetics. Generally, it can be concluded that this locally prepared adsorbent is promising for the removal of chromium from industrial wastewater, but further factorial approach assessment has to be checked.

Highly sensitive detection of carbendazim in juices based on mung bean-derived porous carbon@chitosan composite modified electrochemical sensor

We reported a simple and scalable strategy for the preparation of mung bean-derived porous carbon@chitosan (MBC@CTS) composite, which was used to optimize the glassy carbon electrode (GCE). The MBC@CTS/GCE sensor was applied for the carbendazim (CBZ) detection. For the MBC@CTS composite, MBC with three-dimensional hierarchical structure presented large specific surface area, good adsorbability, and high electrical conductivity, while CTS had good film-forming property, hydrophilicity performance, and adhesion capacity. The MBC@CTS/GCE sensor exhibited wonderful electrochemical detection performance towards CBZ. Under the optimized conditions, the MBC@CTS/GCE sensor showed a linear concentration range from 0.1 to 20 μM with relatively low limit of detection (LOD) of 20 nM. In addition, the fabricated sensor with good reproducibility, stability, and selectivity were successfully applied for the CBZ detection in apple and tomato juices with low relative standard deviation of 2.4 %-4.2% and satisfactory recoveries of 98.8-103.2%.

Breath alcohol sensor based on hydrogel-gated graphene field-effect transistor

The inspection of drunk driving has become an effective measure to reduce the occurrence of traffic accidents. In this work, we constructed a breath alcohol biosensor based on a hydrogel-gated graphene field-effect transistor (HGGT) with chlorella derived layered carbon nanosheets (CNs) and alcohol oxidase (AOx) embedded in the hydrogel. The sensing mechanism of the AOx/CNs functionalized sensor lies in the oxidation reaction of alcohol by AOx and the electrocatalytic oxidation reaction of the generated H₂O₂. The HGGT based alcohol sensor exhibited an excellent sensitivity with a very low detection limit down to 1 μM (i.e. 0.046 ppm), and has been successfully applied to breath alcohol test after drinking. Compared with normal solution-gated graphene transistors, employment of hydrogel as a source of electrolytes greatly enhances the portability of the sensor, and facilitates functionalization with enzymes and nanomaterials. Due to the advantages of real-time, high portability and accuracy of the functionalized HGGT sensor, it demonstrates a promising platform for constructing biosensors for many other analytes.

Electrochemical Sensing of Roxarsone on Natural Biomass-Derived Two-Dimensional Carbon Material as Promising Electrode Material

Herein, we report the electrochemical detection of roxarsone (ROX) on a two-dimensional (2D) activated carbon (AC)-modified glassy carbon electrode (GCE). Meso/microporous 2D-AC is synthesized from a natural biomass Desmostachya bipinnata, commonly known as Kusha in India. This environment-friendly material is synthesized by chemical activation using potassium hydroxide (KOH) and used as a sensitive electrochemical platform for the determination of ROX. It is an arsenic-based medicine, also used as a coccidiostat drug. It is widely used in poultry production as a feed additive to increase weight gain and improve feed efficiency. Long-term exposure to arsenic leads to serious health problems in humans and demands an urgent call for sensitive detection of ROX. Therefore, the green synthesis of 2D-AC is introduced as new carbon support for the electrochemical sensing of ROX. It provides a large surface area and efficiently supports enhanced electron transfer. Its electrocatalytic activity is seen in potassium ferri/ferrocyanide by cyclic voltammetry, where the 2D-AC-modified GCE delivered five to six times higher electrochemical performance as compared to the unmodified GCE. Electrochemical impedance spectroscopy is also performed to show that the prepared material has faster electron transfer and permits a diffusion-controlled process. It works well in real samples and also on disposable screen-printed carbon electrodes, thereby showing great potential for its application in clinical diagnosis. Our results exemplify a modest and innovative style for the synthesis of excellent electrode material in the electrochemical sensing platform and thus offer an inexpensive and highly sensitive novel approach for the electrochemical sensing of ROX and other similar drugs.

Novel lanthanum vanadate-based nanocomposite for simultaneously electrochemical detection of dopamine and uric acid in fetal bovine serum

The abnormal levels of two biological molecules, dopamine (DA) and Uric acid (UA), in human body are symptoms of diseases such as Parkinson's disease and arrhythmia. A novel lanthanum vanadate and multi-walled carbon nanotubes (LaV-MWCNTs) composite modified glassy carbon electrode (GCE) was developed and utilized as an efficient electrochemical sensor for the simultaneous detection of DA and UA. LaV-MWCNTs composite was successfully fabricated by a facile ultrasonic self-assembly method and identified by means of a series of successive measurements including XPS, XRD, FT-IR and FE-SEM. The LaV-MWCNTs modified GCE shows the concentration linear ranges of DA and UA are 2-100 μΜ using DPV. The limits of detection (LODs; signal-to-noise ratio of 3, S/N = 3) of the LaV-MWCNTs modified GCE sensor for DA and UA were calculated to be 0.046 μM and 0.025 μM, respectively. The feasibility of using the LaV-MWCNTs modified GCE sensor to detect DA and UA in a typical biological fluid, fetal bovine serum, was also evaluated by the standard addition method.

Biomass activated carbon-derived imprinted polymer with multi-boronic acid sites for selective capture of glycoprotein

Glycoproteins play crucial roles in many biological events such as protein folding, information transmission, nerve conduction, and molecular recognition. Some glycoproteins serve as disease biomarkers in clinical settings. However, selective detection of glycoprotein often faces great challenges, owing to its low abundance in complex biological samples. In this case, develop a highly sensitive and selective approach for glycoprotein detection is urgently needed. Molecularly imprinted polymers (MIPs) have proved to be an ideal absorbent material in detection and separation science. Herein, a novel biomass activated carbon-derived imprinted polymer (BAC@PEI/PBA/MIPs) was fabricated for selective recognition of glycoprotein. The as-prepared BAC@PEI/PBA/MIPs was synthesized using waste tea derived carbon as matrix, albumin chicken egg (OVA) as template, and dopamine as functional monomer. Branched polyethyleneimine (PEI) was covalently bonded on the BAC surface to increase the number of boronic acid moieties. Benefiting from the self-polymerization of dopamine and multi-boronic acid sites, a great number of recognition sites were presented under mild conditions. The static adsorption experiment showed that the BAC@PEI/PBA/MIPs exhibited a high binding capacity of 196.2 mg/g, rapid adsorption dynamics of 40 min, excellent selectivity and satisfactory reusability for OVA. Furthermore, the practicability of BAC@PEI/PBA/MIPs was verified by isolation of OVA from egg white. The good binding performance and facile preparation process make BAC@PEI/PBA/MIPs attractive for glycoprotein recognition, indicating its potential applications in biomedical research and clinical diagnostics.

Selective and simultaneous sensing of ascorbic acid, dopamine and uric acid based on nitrogen-doped mesoporous carbon

Development of novel sensing nanostructures for facile, economical and fast applications has attracted more and more interest. Herein, a nitrogen-doped mesoporous carbon (NMC) was synthesized by pyrolyzing a mixture of melamine and carbon black at a low-temperature (600 °C) and exploited for the simultaneous sensing of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The as-made NMC exhibits a rougher surface and smaller size than carbon black. Such a one-pot method is very versatile, quick and inexpensive, easy to handle (solvent-, catalyst-, and template-free) and scalable. The oxidation potentials of the NMC/GCE negatively shift and the current responses are enhanced greatly towards the oxidation of AA, DA and UA thanks to the large surface area, mesoporous structure and N-doped active sites. The peak to peak potential separations are 258 and 410 mV for AA-DA and AA-UA. The linear ranges of AA, DA and UA are 5-4500 μM, 0.005-35 μM and 0.5-3500 μM, respectively, and their detection limits are 0.15 μM (AA), 1.6 nM (DA) and 0.15 μM (UA). Meanwhile, the NMC/GCE exhibits satisfactory stability and anti-interference ability. These results show that NMC could be a promising candidate material for electrochemical sensor construction.

The fabrication of a gold nanoelectrode–nanopore nanopipette for dopamine enrichment and multimode detection

It is important to further improve the electrophysiology and electrochemistry techniques of neurotransmitter detection.

Molecularly imprinted polydopamine modified with nickel nanoparticles wrapped with carbon: fabrication, characterization and electrochemical detection of uric acid

An electrochemical sensor is described for determination of uric acid (UA). Carbon-enwrapped nickel nanoparticles (Ni@BC) were coated with polydopamine (PDA) that was molecularly imprinted with UA. The biomass carbon (BC) was synthesized by one-step solid-state pyrolysis from leaves of Firmiana platanifolia. The imprinted polymer was obtained by electrodeposition of DA as the monomer. The amount of monomer, the scan cycles, pH value and adsorption time were optimized. Furthermore, the selectivity of the MIP for UA on a glassy carbon electrode (GCE) was evaluated by selectivity tests. The differential pulse voltammetric responses to UA with and without interferents were consistent. The modified GCE has a linear response in the 0.01-30 μM UA concentration range, and the limit of detection is 8 nM. The MIP electrode was applied to the analysis of UA in urine for which the initial concentrations were determined by the phosphotungstic acid kit. Recoveries ranged from 91.3 to 113.4%, with relative standard deviations between 1.3 and 9.7% (n = 3). Graphical abstract Schematic presentation of electrochemical detection of uric acid by molecularly imprinted polydopamine modified with nickel nanoparticles wrapped with carbon (Ni@BC-MIP).

Binder-Free Modification of a Glassy Carbon Electrode by Using Porous Carbon for Voltammetric Determination of Nitro Isomers

In this study, Liquidambar formosana tree leaves have been used as a renewable biomass precursor for preparing porous carbons (PCs). The PCs were produced by pyrolysis of natural waste of leaves after 10% KOH activation under a nitrogen atmosphere and characterized by a variety of state-of-the-art techniques. The PCs possess a large surface area, micro-/mesoporosity, and functional groups on its surface. A glassy carbon electrode modified with high PCs was explored as an efficient binder-free electrocatalyst material for the voltammetric determination of nitro isomers such as 3-nitroaniline (3-NA) and 4-nitroaniline (4-NA). Under optimal experimental conditions, the electrochemical detection of 3-NA and 4-NA was found to have a wide linear range of 0.2-115.6 and 0.5-120 μM and a low detection limit of 0.0551 and 0.0326 μM, respectively, with appreciable selectivity. This route not only enhanced the benefit from biomass wastes but also reduced the cost of producing electrode materials for electrochemical sensors. Additionally, the sensor was successfully applied in the determination of nitro isomers even in the presence of other common electroactive interference and real samples analysis (beverage and pineapple jam solutions). Therefore, the proposed method is simple, rapid, stable, sensitive, specific, reproducible, and cost-effective and can be applicable for real sample detection.

Hierarchical porous carbon derived from waste amla for the simultaneous electrochemical sensing of multiple biomolecules

For the first time, highly porous and hierarchical carbon with high surface area (∼2430 m² g^-1) has been prepared from waste amla fruits at different carbonization temperatures viz., 700 °C, 800 °C and 900 °C by a simple and eco-friendly method for the simultaneous electrochemical sensing of biologically important compounds such as ascorbic acid (AA), dopamine (DA), uric acid (UA) and nitrite. The porous carbon materials synthesized at 700 °C, 800 °C and 900 °C are denoted as ABC-700, ABC-800 and ABC-900, respectively. The structural and morphological evaluations of as-synthesized hierarchical porous carbon are carried out with advanced tools and the existence of porous morphology is ascertained. The morphology, amorphous nature, disordered nature, surface area, pore volume, thermal stability and elemental composition of the as-prepared porous carbon are investigated by SEM, HRTEM, FT-IR, Raman, TGA, BET, XPS, EDAX and CHNS analysis. Compared with ABC-700 and ABC-900, the electrochemical sensing ability was higher in the case of ABC-800. Therefore, further electrochemical sensing studies are carried out by using ABC-800. The limit of detection for the simultaneous determination of AA, DA, UA and NO₂- are 13.7 μM, 3.2 μM, 1.1 μM and 3.3 μM, respectively. The sensitivity are (0.55, 0.01), (4.73, 0.11), 0.11 and 0.57 μA cm^-2 μM^-1 and linear ranges are (33-166, 166-26470), (1.6-72, 82-2630), 1.6-4134 and 4.9-1184 μM, respectively for AA, DA, UA and NO₂^-. The porous carbon based sensor also proves reliable operational stability, long time stability, selectivity and good antifouling properties. The porous carbon based sensor was successfully applied to the practical application for the detection of these biomolecules in the real samples of urine.

A flower-structured MoS2-decorated f-MWCNTs/ZnO hybrid nanocomposite-modified sensor for the selective electrochemical detection of vitamin C

We synthesized an MoS₂/f-MWCNTs/ZnO composite and successfully used it to prepare an electrochemical sensor for the selective detection of AA in blood serum samples.

Low-cost and environment-friendly synthesis of carbon nanorods assembled hierarchical meso-macroporous carbons networks aerogels from natural apples for the electrochemical determination of ascorbic acid and hydrogen peroxide

In this work, the low-cost carbon nanorods assembled hierarchical meso-macroporous carbons networks aerogels (CNs-HMCNAs) was environment-friendly synthesized from a cheap and abundant biomass of apples (Malus pumila Mill) for the first time. The biomass of apples derived CNs-HMCNAs exhibited the unique hierarchical meso-macroporous structure with large specific surface area and high density of edge defective sites. At the CNs-HMCNAs modified GCE (CNs-HMCNAs/GCE), the electron transfer between the glassy carbon electrode (GCE) and the ascorbic acid (AA) (or hydrogen peroxide (H₂O₂)) was effectively enhanced, and thus induced a low overvoltage for AA electrooxidation (or H₂O₂ electroreduction). As an electrochemical AA (or H₂O₂) sensor, the CNs-HMCNAs/GCE exhibited wider linear range, lower detection limit, higher sensitivity and stability than GCE and the carbon nanotubes modified GCE (CNTs/GCE). In particular, the CNs-HMCNAs/GCE showed great potential feasibility in the practical determination of AA (in AA injection, Vitamin C tablet and kiwi juice) or H₂O₂ (in human urine, milk and beer).

Electrochemical sensing platform based on the biomass-derived microporous carbons for simultaneous determination of ascorbic acid, dopamine, and uric acid

A novel and highly selective electrochemical sensing platform (ZnCl₂-CF/GCE) based on combination of kiwi skin and zinc chloride nanoparticles was developed for the simultaneous detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA). The constructed electrode shows a high surface area and micro-mesoporous structure. And the electrochemical behaviors of the electrode were further explored by cyclic voltammetry (CV), impedance analysis (EIS), and differential pulse voltammetry (DPV). Under the optimal conditions, the ZnCl₂-CF provides a high sensitivity and selective signaling in the co-existence system of AA, DA, and UA with linear response ranges of 0.05-200 μM, 2-2000 μM, and 1-2500 μM, respectively. The detection limits (S/N = 3) were calculated to be 0.02 μM, 0.16 μM, and 0.11 μM, respectively. In addition, the method has been successfully applied to determine AA, DA, and UA in real samples, which provides potential applications in further sensing study.

Porous Zirconium-Furandicarboxylate Microspheres for Efficient Redox Conversion of Biofuranics

Biofuranic compounds, typically derived from C₅ and C₆ carbohydrates, have been extensively studied as promising alternatives to chemicals based on fossil resources. The present work reports the simple assembly of biobased 2,5-furandicarboxylic acid (FDCA) with different metal ions to prepare a range of metal-FDCA hybrids under hydrothermal conditions. The hybrid materials were demonstrated to have porous structure and acid-base bifunctionality. Zr-FDCA-T, in particular, showed a microspheric structure, high thermostability (ca. 400 °C), average pore diameters of approximately 4.7 nm, large density, moderate strength of Lewis-base/acid centers (ca. 1.4 mmol g^-1 ), and a small number of Brønsted-acid sites. This material afforded almost quantitative yields of biofuranic alcohols from the corresponding aldehydes under mild conditions through catalytic transfer hydrogenation (CTH). Isotopic ¹ H NMR spectroscopy and kinetic studies verified that direct hydride transfer was the dominant pathway and rate-determining step of the CTH. Importantly, the Zr-FDCA-T microspheres could be recycled with no decrease in catalytic performance and little leaching of active sites. Moreover, good yields of C₅ (i.e., furfural) or C₄ products [i.e., maleic acid and 2(5H)-furanone] could be obtained from furfuryl alcohol without oxidation of the furan ring over these metal-FDCA hybrids. The content and ratio of Lewis-acid/base sites were demonstrated to dominantly affect the catalytic performance of these redox reactions.

Surfactant-free synthesis of three-dimensional nitrogen-doped hierarchically porous carbon and its application as an electrode modification material for simultaneous sensing of ascorbic acid, dopamine and uric acid

A 3D N-doped hierarchically porous carbon modified electrode enables simultaneous sensitive detection of ascorbic acid, dopamine and uric acid.

Identification and Mitigation of Generated Solid By-Products during Advanced Electrode Materials Processing

A scalable, solid-state elevated-temperature process was developed to produce high-capacity carbonaceous electrode materials for energy storage devices via decomposition of a starch-based precursor in an inert atmosphere. In a separate study, it is shown that the fabricated carbonaceous architectures are useful as an excellent electrode material for lithium-ion, sodium-ion, and lithium-sulfur batteries. This article focuses on the study and analysis of the formed nanometer-sized by-products during the lab-scale synthesis of the carbon material. The material production process was studied in operando (that is, during the entire duration of heat treatment). The unknown downstream particles in the process exhaust were collected and characterized via aerosol and liquid suspensions, and they were quantified using direct-reading instruments for number and mass concentrations. The airborne emissions were collected using the Tsai diffusion sampler (TDS) for characterization and further analysis. Released by-product aerosols collected in a deionized (DI) water trap were analyzed, and the aerosols emitted from the post-water-suspension were collected and characterized. After long-term sampling, individual particles in the nanometer size range were observed in the exhaust aerosol with layer-structured aggregates formed on the sampling substrate. Upon the characterization of the released aerosol by-products, methods were identified to mitigate possible human and environmental exposures upon industrial implementation.

Enhanced electrochemical performance of phosphorus incorporated carbon nanofibers by the spin-on dopant method

Phosphorus-incorporated carbon nanofibers (CNFs) were successfully fabricated by using electrospinning and spin-on dopant (SOD) procedures together for electrochemical capacitors (ECs).

Promising biomass-derived activated carbon and gold nanoparticle nanocomposites as a novel electrode material for electrochemical detection of rutin

A novel electrochemical sensor for rutin was developed based on peanut shell-derived activated carbon and gold nanoparticles composite modified glassy carbon electrode.