Mesoporous gold sponges: electric charge-assisted seed mediated synthesis and application as surface-enhanced Raman scattering substrates

Electrospun polymeric nanofiber decorated with sea urchin-like gold nanoparticles as an efficient and stable SERS platform

Surface enhanced Raman scattering (SERS)-based nanoprobes have been used as well-established analytical tools enabling single-molecule detection. In this work, we report a facile method to decorate sea urchin-like gold nanoparticles (SUGNPs) on the surface of PMMA/P4VP nanofibers. Firstly, PMMA/P4VP nanofibers within the submicrometer size range were prepared by applying the electrospinning technique. Then, the incorporation of SUGNPs on the surface of PMMA/P4VP nanofiber was achieved by immersing PMMA/P4VP nanofiber into freshly prepared SUGNP aqueous solution through the specific Au-N interactions. The as-fabricated SUGNP-coated PMMA/P4VP nanofibers exhibited good sensitivity and reproducibility in SERS measurements with the relative standard deviation down to 6.6%, by employing 4-mercaptobenzoic acid as a probe molecule with 30 min of soaking time. Hence, we envisage that the SUGNP-coated PMMA/P4VP nanofibers can act as efficient and stable SERS substrates for potential applications in molecular detection as well as chemical and biological analysis.

Photothermally Modulatable and Structurally Disintegratable Sub-8-nm Au1Ag9 Embedded Nanoblocks for Combination Cancer Therapy Produced by Plug-in Assembly

As well as the exploration of translatable delivery nanosystems for cancer therapeutic agents, the development of automatable continuous-flow manufacturing technology comprising digitally controlled reactions for the on-demand production of pharmaceuticals is an important challenge in anticancer nanomedicine. Most attempts to resolve these issues have involved the development of alternative reactions, formulations, or constructs containing stimulus components aimed at producing multiple approaches for highly efficacious combination cancer therapies. However, there has been no report of a platform based on plug-in execution that enables continuous-flow manufacture in a compact, reconfigurable manner, although an optimal platform technology may be a prerequisite for the timely translation of recently developed nanomedicines. To this end, we describe the development of a platform toward digitizable, continuous manufacture by a serial combination of plug-in reactionwares (heating plates, a spraying cup, and a photochamber) for single-pass flow fabrication. Specifically, we fabricated three different composite nanoblocks consisting of Au₁Ag₉ (<8 nm; stimulus component), docetaxel (an anticancer drug), and bovine serum albumin (a protective and targeting agent) using our system, with the result of producing nanoblocks with photothermally modulatable and structurally disintegratable properties. These were examined for effectiveness in near-infrared-induced chemothermal cancer therapy and renal excretion of Au₁Ag₉ particles and exhibited high anticancer efficacy and warrantable biosafety.

Plug-and-Play Continuous Gas Flow Assembly of Cysteine-Inserted AuCu Nanobimetals for Folate-Receptor-Targeted Chemo-Phototherapy

Conjugatable nanobimetals exhibiting broadband light absorption for use as phototherapeutic platforms were assembled via a plug-and-play continuous gas flow route. Electrically produced AuCu nanobunches (NBs) under nitrogen gas flow were directly injected into cysteine (cys) solution through gas pressurization to mechanically spray the solution (AuCu into cys droplets). The sprayed droplets were then exposed to 185 nm UV light (higher photon energy [6.2 eV] than the work functions of Au [5.1 eV] and Cu [4.7 eV]) to initiate photoionization of AuCu NBs for subsequent electrostatic reaction with the SH^- group of cys to form cys-inserted AuCu (AuCu-cys) platforms in a single-pass gas stream. These platforms exhibited broadband light absorption spectra because of hybridized interparticle plasmonic coupling and could be conjugated to folic acid (FA) when dispersed in FA solution to form highly dispersible, biocompatible, and cancer-targetable AuCu-cys-FA. This material was suitable for use in targeted phototherapy of folate-receptor (FR)-rich cancers via FR-mediated endocytosis, and loading doxorubicin (DOX) into AuCu-cys-FA (i.e., AuCu-cys-DOXFA) facilitated chemo-phototherapy because of photoresponsive anticancer drug release upon induction of hyperthermia.

Fabrication, Characterization, and Application of Large-Scale Uniformly Hybrid Nanoparticle-Enhanced Raman Spectroscopy Substrates

Surface-enhanced Raman spectroscopy (SERS) substrates with high sensitivity and reproducibility are highly desirable for high precision and even molecular-level detection applications. Here, large-scale uniformly hybrid nanoparticle-enhanced Raman spectroscopy (NERS) substrates with high reproducibility and controllability were developed. Using oxygen plasma treatment, large-area and uniformly rough polystyrene sphere (URPS) arrays in conjunction with 20 nm Au films (AuURPS) were fabricated for SERS substrates. Au nanoparticles and clusters covered the surface of the URPS arrays, and this increased the Raman signal. In the detection of malachite green (MG), the fabricated NERS substrates have high reproducibility and sensitivity. The enhancement factor (EF) of Au nanoparticles and clusters was simulated by finite-difference time-domain (FDTD) simulations and the EF was more than 10⁴. The measured EF of our developed substrate was more than 10⁸ with a relative standard deviation as low as 6.64%–13.84% over 15 points on the substrate. The minimum limit for the MG molecules reached 50 ng/mL. Moreover, the Raman signal had a good linear relationship with the logarithmic concentration of MG, as it ranged from 50 ng/mL to 5 μg/mL. The NERS substrates proposed in this work may serve as a promising detection scheme in chemical and biological fields.

Regulating Surface Facets of Metallic Aerogel Electrocatalysts by Size-Dependent Localized Ostwald Ripening

It is well known that the activity and stability of electrocatalysts are largely dependent on their surface facets. In this work, we have successfully regulated surface facets of three-dimensional (3D) metallic Au ^{m- n} aerogels by salt-induced assembly of citrate-stabilized gold nanoparticles (Au NPs) of two different sizes and further size-dependent localized Ostwald ripening at controlled particle number ratios, where m and n represent the size of Au NPs. In addition, 3D Au ^{m- n}-Pd aerogels were further synthesized on the basis of Au ^{m- n} aerogels and also bear controlled surface facets because of the formation of ultrathin Pd layers on Au ^{m- n} aerogels. Taking the electrooxidation of small organic molecules (such as methanol and ethanol) by the resulting Au ^{m- n} and Au ^{m- n}-Pd aerogels as examples, it is found that surface facets of metallic aerogels with excellent performance can be regulated to realize preferential surface facets for methanol oxidation and ethanol oxidation, respectively. Moreover, they also indeed simultaneously bear high activity and excellent stability. Furthermore, their activities and stability are also highly dependent on the area ratio of active facets and inactive facets on their surfaces, respectively, and these ratios are varied via the mismatch of sizes of adjacent NPs. Thus, this work not only demonstrates the realization of the regulation of the surface facets of metallic aerogels by size-dependent localized Ostwald ripening but also will open up a new way to improve electrocatalytic performance of 3D metallic aerogels by surface regulation.

Porous Silica-Coated Gold Sponges with High Thermal and Catalytic Stability

A method to fabricate porous silica-coated Au sponges that show high thermal and catalytic stability has been developed for the first time. The method involves dense surface functionalization of Au sponges (made by self-assembly of Au nanoparticles) with thiolated poly(ethylene glycol) (SH-PEG), which provides binding and condensation sites for silica precursors. The silica coating thickness can be controlled by using SH-PEG of different molecular weights. The silica-coated Au sponge prepared by using 5 kDa SH-PEG maintains its morphology at temperature as high as 700 °C. The calcination removes all organic molecules, resulting in porous silica-coated Au sponges, which contain hierarchically connected micro- and mesopores. The hierarchical pore structures provide an efficient pathway for reactant molecules to access the surface of Au sponges. The porous silica-coated Au sponges show an excellent catalytic recyclability, maintaining the catalytic conversion percentage of 4-nitrophenol by NaBH₄ to 4-aminophenol as high as 93% even after 10 catalytic cycles. The method may be applicable for other porous metals, which are of great interests for catalyst, fuel cell, and sensor applications.

Fried egg-like Au mesostructures grown on poly(4-vinylpyridine) brushes grafted onto graphene oxide

Hierarchical Au mesostructures as SERS-active substrates were facilely fabricated by the reduction of HAuCl₄-loaded poly(4-vinylpyridine) brushes with ascorbic acid.

Enhancement of the upconversion photoluminescence of hexagonal phase NaYF4:Yb3+,Er3+ nanoparticles by mesoporous gold films

Efficient enhancement of photoluminescence in rare-earth activated upconversion materials is of great significance for their practical applications in various fields.

Ordered array of Ag semishells on different diameter monolayer polystyrene colloidal crystals: An ultrasensitive and reproducible SERS substrate

Ag semishells (AgSS) ordered arrays for surface-enhanced Raman scattering (SERS) spectroscopy have been prepared by depositing Ag film onto polystyrene colloidal particle (PSCP) monolayer templates array. The diversified activity for SERS activity with the ordered AgSS arrays mainly depends on the PSCP diameter and Ag film thickness. The high SERS sensitivity and reproducibility are proved by the detection of rhodamine 6G (R6G) and 4-aminothiophenol (4-ATP) molecules. The prominent enhancements of SERS are mainly from the “V”-shaped or “U”-shaped nanogaps on AgSS, which are experimentally and theoretically investigated. The higher SERS activity, stability and reproducibility make the ordered AgSS a promising choice for practical SERS low concentration detection applications.

Silk Fiber as the Support and Reductant for the Facile Synthesis of Ag-Fe₃O₄ Nanocomposites and Its Antibacterial Properties

We report a facile and environmentally friendly approach to prepare Ag-Fe₃O₄-silk fiber nanocomposites. The Ag-Fe₃O₄-silk fiber acts as: (i) a biocompatible support for the silver nanoparticles; and (ii) a reducing agent for the silver ions. Neither additional reducing agents nor toxic organic solvents were used during the preparation process. The Ag-Fe₃O₄-silk fiber nanocomposites can be actuated by a small household magnet and have high antibacterial activities against both Escherichia coli and Staphylococcus aureus. These nanocomposites could be easily recycled without a decrease in their antibacterial activities due to the synergistic effects between the Ag NPs and Fe₃O₄ NPs with large amounts of active sites.

Green Synthesis of High-Purity Mesoporous Gold Sponges Using Self-Assembly of Gold Nanoparticles Induced by Thiolated Poly(ethylene glycol)

A facile and green synthesis method for mesoporous gold sponges has been developed, which involves a simple mixing of a very small amount of thiolated-poly(ethylene glycol) (SH-PEG) and citrate-covered gold nanoparticles (Au NPs) in aqueous solution at room temperature. While SH-PEG molecules have been widely used as biocompatible hydrophilic capping agents for Au NPs for stable dispersion in aqueous solution, here they are used as destabilizing agents. When SH-PEG molecules are mixed with citrate-covered Au NPs at the molar ratio ranging from 3 to 20 (SH-PEG/Au NP), mesoporous gold sponges with randomly interconnected 3D network structures are formed within 2 to 3 h. This is driven by the destabilization of negatively charged citrate molecules on Au NPs by a small number of SH-PEG molecules bonded on the particle surface, which results in the decrease in zeta potential and thus the assembly of Au NPs into porous sponges. The use of very low concentration of SH-PEG (ca. 20-200 nM) in aqueous solution at room temperature makes the method highly eco-friendly as well as results in high-purity as-synthesized gold sponges (98.7 wt %). The mesoporous gold sponges fabricated with the present method exhibit a high SERS activity, making them highly applicable for sensitive SERS detection of molecules.

A Boronate Affinity-Assisted SERS Tag Equipped with a Sandwich System for Detection of Glycated Hemoglobin in the Hemolysate of Human Erythrocytes

Phenylboronic acid-functionalized, Ag shell-coated, magnetic, monodisperse polymethacrylate microspheres equipped with a glycoprotein-sensitive sandwich system were proposed as a surface-enhanced Raman scattering (SERS) substrate for quantitative determination of glycated hemoglobin (HbA1c). The magnetization of the SERS tag and the formation of the Ag shell on the magnetic support were achieved using the bifunctional reactivity of newly synthesized polymethacrylate microspheres. The hemolysate of human red blood cells containing both HbA1c and nonglycated hemoglobin was used for determination of HbA1c. The working principle of the proposed SERS tag is based on the immobilization of HbA1c by cyclic boronate ester formation between glycosyl residues of HbA1c and boronic acid groups of magnetic polymethacrylate microspheres and the binding of p-aminothiophenol (PATP)-functionalized Ag nanoparticles (Ag NPs) carrying another boronic acid ligand via cyclic boronate ester formation via unused glycosyl groups of bound HbA1c. Then, in situ formation of a Raman reporter, 4,4'-dimercaptoazobenzene from PATP under 785 nm laser irradiation allowed for the quantification of HbA1c bound onto the magnetic SERS tag, which was proportional to the HbA1c concentration in the hemolysate of human erythrocytes. The sandwich system provided a significant enhancement in the SERS signal intensity due to the plasmon coupling between Ag NPs and Ag shell-coated magnetic microspheres, and low HbA1c concentrations down to 50 ng/mL could be detected. The calibration curve obtained with a high correlation coefficient between the SERS signal intensity and HbA1c level showed the usability of the SERS protocol for the determination of the HbA1c level in any person.