Discovery of 12-mer peptides that bind to wood lignin

Synthesis and Binding Properties of High-Affinity Histidine-Bearing Polymers for Wood Lignin

The pursuit of molecules capable of binding to wood lignin is pivotal for advancing lignin degradation technology, particularly when combined with lignin degradation catalysts. In this study, synthetic polymers bearing histidine moieties, demonstrating remarkable affinity for wood lignin are reported. These polymers, featuring varying degrees of histidine substitution in the form of histidine methyl esters, are synthesized through controlled radical polymerization of an activated ester-bearing monomer, employing a fluorescein-labeled chain transfer agent and subsequent postpolymerization amidation with histidine methyl ester. The binding properties of these histidine-bearing polymers with milled wood lignin under aqueous conditions are investigated. Qualitative assessment of lignin-binding capabilities involve spectroscopic analysis of changes in absorbance of visible light and fluorescence intensity. Furthermore, quantitative evaluation is conducted through surface plasmon resonance measurements to determine the binding parameters of the polymers with wood lignin. Notably, polymers with higher histidine substitution exhibit enhanced binding affinity compared to those with lower histidine substitution levels.

Preparation and Biological Activity of Lignin-Silver Hybrid Nanoparticles

Silver nanoparticles (AgNPs) are excellent antimicrobial agents and promising candidates for preventing or treating bacterial infections caused by antibiotic resistant strains. However, their increasing use in commercial products raises concerns about their environmental impact. In addition, traditional physicochemical approaches often involve harmful agents and excessive energy consumption, resulting in AgNPs with short-term colloidal stability and silver ion leaching. To address these issues, we designed stable hybrid lignin-silver nanoparticles (AgLigNPs) intended to effectively hit bacterial envelopes as a main antimicrobial target. The lignin nanoparticles (LigNPs), serving as a reducing and stabilizing agent for AgNPs, have a median size of 256 nm and a circularity of 0.985. These LigNPs were prepared using the dialysis solvent exchange method, producing spherical particles stable under alkaline conditions and featuring reducing groups oriented toward a wrinkled surface, facilitating AgNPs synthesis and attachment. Maximum accumulation of silver on the LigNP surface was observed at a mass reaction ratio mAg:mLig of 0.25, at pH 11. The AgLigNPs completely inhibited suspension growth and reduced biofilm development by 50% in three tested strains of Pseudomonas aeruginosa at a concentration of 80/9.5 (lignin/silver) mg L-1. Compared to unattached AgNPs, AgLigNPs required two to eight times lower silver concentrations to achieve complete inhibition. Additionally, our silver-containing nanosystems were effective against bacteria at safe concentrations in HEK-293 and HaCaT tissue cultures. Stability experiments revealed that the nanosystems tend to aggregate in media used for bacterial cell cultures but remain stable in media used for tissue cultures. In all tested media, the nanoparticles retained their integrity, and the presence of lignin facilitated the prevention of silver ions from leaching. Overall, our data demonstrate the suitability of AgLigNPs for further valorization in the biomedical sector.

Brain-Penetrating Peptide Shuttles across the Blood-Brain Barrier and Extracellular-like Space

Systemic delivery of therapeutics into the brain is greatly impaired by multiple biological barriers─the blood-brain barrier (BBB) and the extracellular matrix (ECM) of the extracellular space. To address this problem, we developed a combinatorial approach to identify peptides that can shuttle and transport across both barriers. A cysteine-constrained heptapeptide M13 phage display library was iteratively panned against an established BBB model for three rounds to select for peptides that can transport across the barrier. Using next-generation DNA sequencing and in silico analysis, we identified peptides that were selectively enriched from successive rounds of panning for functional validation in vitro and in vivo. Select peptide-presenting phages exhibited efficient shuttling across the in vitro BBB model. Two clones, Pep-3 and Pep-9, exhibited higher specificity and efficiency of transcytosis than controls. We confirmed that peptides Pep-3 and Pep-9 demonstrated better diffusive transport through the extracellular matrix than gold standard nona-arginine and clinically trialed angiopep-2 peptides. In in vivo studies, we demonstrated that systemically administered Pep-3 and Pep-9 peptide-presenting phages penetrate the BBB and distribute into the brain parenchyma. In addition, free peptides Pep-3 and Pep-9 achieved higher accumulation in the brain than free angiopep-2 and may exhibit brain targeting. In summary, these in vitro and in vivo studies highlight that combinatorial phage display with a designed selection strategy can identify peptides as promising carriers, which are able to overcome the multiple biological barriers of the brain and shuttle different-sized molecules from small fluorophores to large macromolecules for improved delivery into the brain.

Applications of Material-Binding Peptides: A Review

Material-binding peptides (MBPs) are functionalized adhesive materials consisting of a few to several dozen amino acids. This affinity between MBPs and materials is regulated by multiple interactions, including hydrogen bonding, electrostatic, hydrophobic interactions, and π-π stacking. They show selective binding and high affinity to a diverse range of inorganic and organic materials, such as silicon-based materials, metals, metal compounds, carbon materials, and polymers. They are used to improve the biocompatibility of materials, increase the efficiency of material synthesis, and guide the controlled synthesis of nanomaterials. In addition, these can be used for precise targeting of proteins by conjugating to target biomolecules. In this review, we summarize the main designs and applications of MBPs in recent years. The discussions focus on more efficient and functional peptides, including evolution and overall design of MBPs. We have also highlighted the recent applications of MBPs, such as functionalization of material surfaces, synthesis of nanomaterials, drug delivery, cancer therapy, and plastic degradation. Besides, we also discussed the development trend of MBPs. This interpretation will accelerate future investigations to bottleneck the drawbacks of available MBPs, promoting their commercial applications.

Affinity of Keratin Peptides for Cellulose and Lignin: A Fundamental Study toward Advanced Bio-Based Materials

Keratin is a potential raw material to meet the growing demand for bio-based materials with special properties. Keratin can be obtained from feathers, a by-product from the poultry industry. One approach for keratin valorization is to use the protein to improve the properties of already existing cellulose and lignin-based materials to meet the requirements for replacing fossil-based plastics. To ensure a successful combination of keratin with lignocellulosic building blocks, keratin must have an affinity to these substrates. Hence, we used quartz crystal microbalance with a dissipation monitoring (QCM-D) technique to get a detailed understanding of the adsorption of keratin peptides onto lignocellulosic substrates and how the morphology of the substrate, pH, ionic strength, and keratin properties affected the adsorption. Keratin was fractionated from feathers with a scalable and environmentally friendly deep eutectic solvent process. The keratin fraction used in the adsorption studies consisted of different sized keratin peptides (about 1-4 kDa), which had adopted a random coil conformation as observed by circular dichroism (CD). Measuring keratin adsorption to different lignocellulosic substrates by QCM-D revealed a significant affinity of keratin peptides for lignin, both as smooth films and in the form of nanoparticles but only a weak interaction between cellulose and keratin. Systematic evaluation of the effect of surface, media, and protein properties enabled us to obtain a deeper understanding of the driving force for adsorption. Both the structure and size of the keratin peptides appeared to play an important role in its adsorption. The keratin-lignin combination is an attractive option for advanced material applications. For improved adsorption on cellulose, modifications of either keratin or cellulose would be required.

Biosequestration of lignin in municipal landfill leachate by tailored cationic lipoprotein biosurfactant through Bacillus tropicus valorized tannery solid waste

Bioremediation of municipal landfill leachate (MLL) is often intricate due to presence of refractory lignin. In the present study, it was attempted to tailor the histidine rich protein moiety of cationic lipoprotein biosurfactant (CLB) to sequester the lignin from MLL. Animal fleshing (AF), the solid waste generated in tanning industry was utilized for the production of histidine rich CLB by de novo substrate dependent synthesis pathway involving Bacillus tropicus. The optimum conditions for the maximum production of CLB were determined using response surface methodology. At the optimized conditions, the maximum yield of CLB was 217.4 mg/g AF (on dry basis). The produced histidine rich CLB was purified using Immobilized metal affinity chromatography at the optimum binding and elution conditions. The histidine residues were more pronounced in the CLB, as determined by HPLC analysis. The CLB was further characterized by SDS-PAGE, Zeta potential, XRD, FT-IR, Raman, NMR, GC-MS and TG analyses. The CLB was immobilized onto functionalized nanoporous activated bio carbon (FNABC) and the optimum immobilization capacity was found to be 211.6 mg/g FNABC. The immobilization of CLB onto FNABC was confirmed using SEM, FT-IR, XRD and TG analyses. The isotherm models, kinetic and thermodynamics studies of CLB immobilization onto FNABC were performed to evaluate its field level application. Subsequently, the CLB-FNABC was then applied for the sequestration of lignin in MLL. The maximum lignin sequestration was achieved by 92.5 mg/g CLB-FNABC at the optimized sequestration time, 180 min; pH, 5; temperature, 45 °C and mass of CLB-FNABC, 1.0 g. The sequestration of lignin by CLB- FNABC was confirmed by SEM, FT-IR and UV-Vis analyses. Further, the mechanistic study revealed the anchoring of CLB onto the surface of lignin through electrostatic interaction.

Non-productive binding of cellobiohydrolase i investigated by surface plasmon resonance spectroscopy

Future biorefineries are facing the challenge to separate and depolymerize biopolymers into their building blocks for the production of biofuels and basic molecules as chemical stock. Fungi have evolved lignocellulolytic enzymes to perform this task specifically and efficiently, but a detailed understanding of their heterogeneous reactions is a prerequisite for the optimization of large-scale enzymatic biomass degradation. Here, we investigate the binding of cellulolytic enzymes onto biopolymers by surface plasmon resonance (SPR) spectroscopy for the fast and precise characterization of enzyme adsorption processes. Using different sensor architectures, SPR probes modified with regenerated cellulose as well as with lignin films were prepared by spin-coating techniques. The modified SPR probes were analyzed by atomic force microscopy and static contact angle measurements to determine physical and surface molecular properties. SPR spectroscopy was used to study the activity and affinity of Trichoderma reesei cellobiohydrolase I (CBHI) glycoforms on the modified SPR probes. N-glycan removal led to no significant change in activity or cellulose binding, while a slightly higher tendency for non-productive binding to SPR probes modified with different lignin fractions was observed. The results suggest that the main role of the N-glycosylation in CBHI is not to prevent non-productive binding to lignin, but probably to increase its stability against proteolytic degradation. The work also demonstrates the suitability of SPR-based techniques for the characterization of the binding of lignocellulolytic enzymes to biomass-derived polymers.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10570-021-04002-6.

Is oblique scanning laser ophthalmoscope applicable to human ocular optics? A feasibility study using an eye model for volumetric imaging

Oblique scanning laser ophthalmoscopy (oSLO) is a novel imaging modality to provide volumetric retinal imaging without depth sectioning over a large field of view (FOV). It has been successfully demonstrated in vivo in rodent eyes for volumetric fluorescein angiography (vFA). However, engineering oSLO for human retinal imaging is challenging because of the low numerical aperture (NA) of human ocular optics. To overcome this challenge, we implement optical designs to (a) increase the angle of the intermediate image under Scheimpflug condition, and (b) expand the magnification in the depth dimension with cylindrical lens to enable sufficient sampling density. In addition, we adopt a scanning-and-descaning strategy, resulting in a compact oSLO system. We experimentally show that the current setup can achieve a FOV of ~3 × 6 × 0.8 mm3 , and the transverse and axial resolutions of 7 and 41 μm, respectively. This feasibility study serves an important step for future in vivo human retinal imaging.

The Effect of Oligomerization on A Solid-Binding Peptide Binding to Silica-Based Materials

The bifunctional linker-protein G (LPG) fusion protein comprises a peptide (linker) sequence and a truncated form of Streptococcus strain G148 protein G (protein G). The linker represents a multimeric solid-binding peptide (SBP) comprising 4 × 21-amino acid sequence repeats that display high binding affinity towards silica-based materials. In this study, several truncated derivatives were investigated to determine the effect of the SBP oligomerization on the silica binding function of LPG (for the sake of clarity, LPG will be referred from here on as 4 × LPG). Various biophysical characterization techniques were used to quantify and compare the truncated derivatives against 4 × LPG and protein G without linker (PG). The derivative containing two sequence repeats (2 × LPG) showed minimal binding to silica, while the truncated derivative with only a single sequence (1 × LPG) displayed no binding. The derivative containing three sequence repeats (3 × LPG) was able to bind to silica with a binding affinity of K_D = 53.23 ± 4.5 nM, which is 1.5 times lower than that obtained for 4 × LPG under similar experimental conditions. Circular dichroism (CD) spectroscopy and fluorescence spectroscopy studies indicated that the SBP degree of oligomerization has only a small effect on the secondary structure (the linker unravels the beginning of the protein G sequence) and chemical stability of the parent protein G. However, based on quartz crystal microbalance with dissipation monitoring (QCM-D), oligomerization is an important parameter for a strong and stable binding to silica. The replacement of three sequence repeats by a (GGGGS)₁₂ glycine-rich spacer indicated that the overall length rather than the SBP oligomerization mediated the effective binding to silica.

Experimental and theoretical tools to elucidate the binding mechanisms of solid-binding peptides

The interactions between biomolecules and solid surfaces play an important role in designing new materials and applications which mimic nature. Recently, solid-binding peptides (SBPs) have emerged as potential molecular building blocks in nanobiotechnology. SBPs exhibit high selectivity and binding affinity towards a wide range of inorganic and organic materials. Although these peptides have been widely used in various applications, there is a need to understand the interaction mechanism between the peptide and its material substrate, which is challenging both experimentally and theoretically. This review describes the main characterisation techniques currently available to study SBP-surface interactions and their contribution to gain a better insight for designing new peptides for tailored binding.

Layer by layer supported laccase on lignin nanoparticles catalyzes the selective oxidation of alcohols to aldehydes

Lignin nanoparticles support laccase from Trametes versicolor in the selective oxidation of alcohols to aldehydes, in the presence of redox mediators.

Robust Surface Plasmon Resonance Chips for Repetitive and Accurate Analysis of Lignin-Peptide Interactions

We have developed novel surface plasmon resonance (SPR) sensor chips whose surfaces bear newly synthesized functional self-assembled monolayer (SAM) anchoring lignin through covalent chemical bonds. The SPR sensor chips are remarkably robust and suitable for repetitive and accurate measurement of noncovalent lignin-peptide interactions, which is of significant interest in the chemical or biochemical conversion of renewable woody biomass to valuable chemical feedstocks. The lignin-anchored SAMs were prepared for the first time by click chemistry based on an azide-alkyne Huisgen cycloaddition: mixed SAMs are fabricated on gold thin film using a mixture of alkynyl and methyl thioalkyloligo(ethylene oxide) disulfides and then reacted with azidated milled wood lignins to furnish the functional SAMs anchoring lignins covalently. The resulting SAMs were characterized using infrared reflection-absorption, Raman, and X-ray photoelectron spectroscopies to confirm covalent immobilization of the lignins to the SAMs via triazole linkages and also to reveal that the SAM formation induces a helical conformation of the ethylene oxide chains. Further, SPR measurements of the noncovalent lignin-peptide interactions using lignin-binding peptides have demonstrated high reproducibility and durability of the prepared lignin-anchored sensor chips.

Functionalized Tyrosinase-Lignin Nanoparticles as Sustainable Catalysts for the Oxidation of Phenols

Sustainable catalysts for the oxidation of phenol derivatives under environmentally friendly conditions were prepared by the functionalization of lignin nanoparticles with tyrosinase. Lignin, the most abundant polyphenol in nature, is the main byproduct in the pulp and paper manufacturing industry and biorefinery. Tyrosinase has been immobilized by direct adsorption, encapsulation, and layer-by-layer deposition, with or without glutaraldehyde reticulation. Lignin nanoparticles were found to be stable to the tyrosinase activity. After the enzyme immobilization, they showed a moderate to high catalytic effect in the synthesis of catechol derivatives, with the efficacy of the catalyst being dependent on the specific immobilization procedures.

Production of lignin based insoluble polymers (anionic hydrogels) by C. versicolor

Unlike previous lignin biodegradation studies, white rot fungi were used to produce functional biopolymers from Kraft lignin. Lignin-based polymers (hydrogel precursors) partially soluble in both aqueous and organic solvents were produced employing a relatively fast (6 days) enzymation of Kraft lignin with basidiomycetes, primarily Coriolus versicolor, pre-grown on kenaf/lignin agar followed by either vacuum evaporation or acid precipitation. After drying followed by a treatment with alkaline water, this intermediate polymer became a pH-sensitive anionic hydrogel insoluble in either aqueous or organic solvents. The yield of this polymer increased from 20 to 72 wt% with the addition of 2% dimethylsulfoxide to distilled water used as a medium. The mechanical stability and buffering capacity of this hydrogel can be adjusted by washing the intermediate polymer/hydrogel precursor prior to drying with solvents of different polarity (water, methanol or ethanol). Any of these polymers featured a significant thermal resilience assessed as a high thermostable “coked” fraction in thermal carbon analysis, apparently resulting from significant covalent cross-linking that occurs during the treatment of their intermediate precursors.

Adsorption of Proteins on Colloidal Lignin Particles for Advanced Biomaterials

Coating of colloidal lignin particles (CLPs), or lignin nanoparticles (LNPs), with proteins was evaluated in order to establish a safe, self-assembly mediated modification technique to tune their surface chemistry. Gelatin and poly- l-lysine formed the most pronounced protein corona on the CLP surface, as determined by dynamic light scattering (DLS) and zeta potential measurements. Spherical morphology of individual protein coated CLPs was confirmed by transmission electron (TEM) and atomic force (AFM) microscopy. A mechanistic adsorption study with several random coiled and globular model proteins was carried out using quartz crystal microbalance with dissipation monitoring (QCM-D). The three-dimensional (3D) protein fold structure and certain amino acid interactions were decisive for the protein adsorption on the lignin surface. The main driving forces for protein adsorption were electrostatic, hydrophobic, and van der Waals interactions, and hydrogen bonding. The relative contributions of these interactions were highly dependent on the ionic strength of the surrounding medium. Capillary electrophoresis (CE) and Fourier transform infrared spectroscopy (FTIR) provided further evidence of the adsorption-enhancing role of specific amino acid residues such as serine and proline. These results have high impact on the utilization of lignin as colloidal particles in biomedicine and biodegradable materials, as the protein corona enables tailoring of the CLP surface chemistry for intended applications.

Discovery of a polystyrene binding peptide isolated from phage display library and its application in peptide immobilization

Phage peptide display is a powerful technique for discovery of various target-specific ligands. However, target-unrelated peptides can often be obtained and cause ambiguous results. Peptide PB-TUP has been isolated repeatedly in our laboratory on different targets and we conducted a research on PB-TUP phage to investigate their binding properties and rate of propagation. ELISA and phage recovery assay demonstrated that PB-TUP phage had a significant superior affinity to polystyrene solid surface compared with control phage clones. In this study, some incidental bindings are excluded like blocking agents and non-specific binding of secondary antibodies. Propagation rate assays of the selected phage clones showed that the growth rate of PB-TUP phage was not superior to the control phages. Furthermore, the binding of PB-TUB to polystyrene was concentration dependent and varied with solution pH. Molecular modeling revealed that stable structures of α-helix and β-turn may contribute to the binding of PB-TUP to polystyrene plate. The PB-TUP sequence was fused to the N-terminus of peptide P2 and the fusion peptide significantly increased the binding affinity to polystyrene. The fusion peptide also enhanced the cell adhesion ability of peptide P2 with human umbilical vein endothelial cell (HUVEC). The addition of the polystyrene binding peptide provided a convenient method for peptide immobilization.

Lignin-derived inhibition of monocomponent cellulases and a xylanase in the hydrolysis of lignocellulosics

Non-productive enzyme binding onto lignin is the major inhibitory mechanism, which reduces hydrolysis rates and yields and prevents efficient enzyme recycling in the hydrolysis of lignocellulosics. The detailed mechanisms of binding are still poorly understood. Enzyme-lignin interactions were investigated by comparing the structural properties and binding behaviour of fungal monocomponent enzymes, cellobiohydrolases TrCel7A and TrCel6A, endoglucanases TrCel7B and TrCel5A, a xylanase TrXyn11 and a β-glucosidase AnCel3A, onto lignins isolated from steam pretreated spruce and wheat straw. The enzymes exhibited decreasing affinity onto lignin model films in the following order: TrCel7B>TrCel6A>TrCel5A>AnCel3A>TrCel7A>TrXyn11. As analysed in Avicel hydrolysis, TrCel6A and TrCel7B were most inhibited by lignin isolated from pretreated spruce. This could be partially explained by adsorption of the enzyme onto the lignin surface. Enzyme properties, such as enzyme surface charge, thermal stability or surface hydrophobicity could not alone explain the adsorption behaviour.

Binding behaviour of a 12-mer peptide and its tandem dimer to gymnospermae and angiospermae lignins

Analysis of conformational changes of lignin-binding dodecapeptide and its tandem dimer on addition of lignin by ATR-FTIR.