Genipin crosslinking reduced the immunogenicity of xenogeneic decellularized porcine whole-liver matrices through regulation of immune cell proliferation and polarization

Decellularized porcine peripheral nerve based injectable hydrogels as a Schwann cell carrier for injured spinal cord regeneration

Objective.To develop a clinically relevant injectable hydrogel derived from decellularized porcine peripheral nerves and with mechanical properties comparable to native central nervous system (CNS) tissue to be used as a delivery vehicle for Schwann cell transplantation to treat spinal cord injury (SCI).Approach.Porcine peripheral nerves (sciatic and peroneal) were decellularized by chemical decellularization using a sodium deoxycholate and DNase (SDD) method previously developed by our group. The decellularized nerves were delipidated using dichloromethane and ethanol solvent and then digested using pepsin enzyme to form injectable hydrogel formulations. Genipin was used as a crosslinker to enhance mechanical properties. The injectability, mechanical properties, and gelation kinetics of the hydrogels were further analyzed using rheology. Schwann cells encapsulated within the injectable hydrogel formulations were passed through a 25-gauge needle and cell viability was assessed using live/dead staining. The ability of the hydrogel to maintain Schwann cell viability against an inflammatory milieu was assessedin vitrousing inflamed astrocytes co-cultured with Schwann cells.Mainresults. The SDD method effectively removes cells and retains extracellular matrix in decellularized tissues. Using rheological studies, we found that delipidation of decellularized porcine peripheral nerves using dichloromethane and ethanol solvent improves gelation kinetics and mechanical strength of hydrogels. The delipidated and decellularized hydrogels crosslinked using genipin mimicked the mechanical strength of CNS tissue. The hydrogels were found to have shear thinning properties desirable for injectable formulations and they also maintained higher Schwann cell viability during injection compared to saline controls. Usingin vitroco-culture experiments, we found that the genipin-crosslinked hydrogels also protected Schwann cells from astrocyte-mediated inflammation.Significance. Injectable hydrogels developed using delipidated and decellularized porcine peripheral nerves are a potential clinically relevant solution to deliver Schwann cells, and possibly other therapeutic cells, at the SCI site by maintaining higher cellular viability and increasing therapeutic efficacy for SCI treatment.

Crosslinking strategies of decellularized extracellular matrix in tissue regeneration

By removing the immunogenic cellular components through various decellularization methods, decellularized extracellular matrix (dECM) is considered a promising material in the field of tissue engineering and regenerative medicine with highly preserved physicochemical properties and superior biocompatibility. However, decellularization treatment can lead to some loss of structural integrity, mechanical strength, degradation stability, and biological performance of dECM biomaterials. Therefore, physical and chemical crosslinking methods are preferred to restore or even improve the biomechanical properties, stability, and bioactivity, and to achieve a delicate balance between degradation of the implanted biomaterial and regeneration of the host tissue. This review provides an overview of dECM biomaterials, and describes and compares the mechanisms and characteristics of commonly used crosslinking methods for dECM, with a focus on the potential applications of versatile dECM-based biomaterials derived from skin, cardiac tissues (pericardium, heart valves, myocardial tissue), blood vessels, liver, and kidney, modified with different chemical crosslinking reagents, in tissue and organ regeneration.

Strategies for decellularization, re-cellularIzation and crosslinking in liver bioengineering

Liver transplantation is the only definitive treatment for end-stage liver disease and its availability is restricted by organ donor shortages. The development of liver bioengineering provides the probability to create a functional alternative to reduce the gap in organ demand and supply. Decellularized liver scaffolds have been widely applied in bioengineering because they can mimic the native liver microenvironment and retain extracellular matrix (ECM) components. Multiple approaches including chemical, physical and biological methods have been developed for liver decellularization in current studies, but a full set of unified criteria has not yet been established. Each method has its advantages and drawbacks that influence the microstructure and ligand landscape of decellularized liver scaffolds. Optimizing a decellularization method to eliminate cell material while retaining as much of the ECM intact as possible is therefore important for biological scaffold applications. Furthermore, crosslinking strategies can improve the biological performance of scaffolds, including reinforcing biomechanics, delaying degradation in vivo and reducing immune rejection, which can better promote the integration of re-cellularized scaffolds with host tissue and influence the reconstruction process. In this review, we aim to present the different liver decellularization techniques, the crosslinking methods to improve scaffold characteristics with crosslinking and the preparation of soluble ECM.

Development of a novel in vitro cell model for evaluation of nanofiber mats immunogenicity

Immunological safety of nanofibers remains poorly reported within the scientific literature and lacks specific in vitro testing models distinct from those used to test nanoparticles. To address the challenges of currently used conventional setups being described in the literature, we developed a novel in vitro model for nanofiber mats immunogenicity testing, which enables standardization of tested surface area, excludes nanofiber mat edges, and ensures stable contacts of cells with nanofibers during the experiment. The effect of nanofibers was assessed on peripheral blood mononuclear cells (PBMCs) by measuring their metabolic activity using MTS cell proliferation assay, where key performance parameters, i.e. cell number, phytohemagglutinin-L (PHA-L) concentration, incubation time and cell lysis were optimized. Repeatability of results obtained with non-activated and PHA-L-activated PBMCs in contact with differently thick polycaprolactone nanofiber mats was compared using both models. Our model provided more reproducible results with lower variability, exhibiting its higher reliability and accuracy than the conventional one. Furthermore, results showed the presence of thicker mats resulted in reduced metabolic activity and PBMC proliferation without any observed cytotoxicity, providing additional insights into their non-immunogenic characteristics. The developed model enables more accurate biological assessment that can support new guidelines for in vitro nanofiber testing and formulation.

Overview of Tissue Engineering and Drug Delivery Applications of Reactive Electrospinning and Crosslinking Techniques of Polymeric Nanofibers with Highlights on Their Biocompatibility Testing and Regulatory Aspects

Traditional electrospinning is a promising technique for fabricating nanofibers for tissue engineering and drug delivery applications. The method is highly efficient in producing nanofibers with morphology and porosity similar to the extracellular matrix. Nonetheless, and in many instances, the process has faced several limitations, including weak mechanical strength, large diameter distributions, and scaling-up difficulties of its fabricated electrospun nanofibers. The constraints of the polymer solution's intrinsic properties are primarily responsible for these limitations. Reactive electrospinning constitutes a novel and modified electrospinning techniques developed to overcome those challenges and improve the properties of the fabricated fibers intended for various biomedical applications. This review mainly addresses reactive electrospinning techniques, a relatively new approach for making in situ or post-crosslinked nanofibers. It provides an overview of and discusses the recent literature about chemical and photoreactive electrospinning, their various techniques, their biomedical applications, and FDA regulatory aspects related to their approval and marketing. Another aspect highlighted in this review is the use of crosslinking and reactive electrospinning techniques to enhance the fabricated nanofibers' physicochemical and mechanical properties and make them more biocompatible and tailored for advanced intelligent drug delivery and tissue engineering applications.

Biomedical Application of Decellularized Scaffolds

Tissue loss and end-stage organ failure are serious health problems across the world. Natural and synthetic polymer scaffold material based artificial organs play an important role in the field of tissue engineering and organ regeneration, but they are not from the body and may cause side effects such as rejection. In recent years, the biomimetic decellularized scaffold based materials have drawn great attention in the tissue engineering field for their good biocompatibility, easy modification, and excellent organism adaptability. Therefore, in this review, we comprehensively summarize the application of decellularized scaffolds in tissue engineering and biomedicine in recent years. The preparation methods, modification strategies, construction of artificial tissues, and application in biomedical applications are discussed. We hope that this review will provide a useful reference for research on decellularized scaffolds and promote their application tissue engineering.

A Pilot Study to Evaluate Genipin in Staphylococcus aureus and Pseudomonas aeruginosa Keratitis Models: Modulation of Pro-Inflammatory Cytokines and Matrix Metalloproteinases

Infectious keratitis is a vision-threatening microbial infection. The increasing antimicrobial resistance and the fact that severe cases often evolve into corneal perforation necessitate the development of alternative therapeutics for effective medical management. Genipin, a natural crosslinker, was recently shown to exert antimicrobial effects in an ex vivo model of microbial keratitis, highlighting its potential to serve as a novel treatment for infectious keratitis. This study aimed to evaluate the antimicrobial and anti-inflammatory effects of genipin in an in vivo model of Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) keratitis. Clinical scores, confocal microscopy, plate count, and histology were carried out to evaluate the severity of keratitis. To assess the effect of genipin on inflammation, the gene expression of pro- and anti-inflammatory factors, including matrix metalloproteinases (MMPs), were evaluated. Genipin treatment alleviated the severity of bacterial keratitis by reducing bacterial load and repressing neutrophil infiltration. The expression of interleukin 1B (IL1B), interleukin 6 (IL6), interleukin 8 (IL8), interleukin 15 (IL15), tumor necrosis factor-α (TNF-α), and interferon γ (IFNγ), as well as MMP2 and MMP9, were significantly reduced in genipin-treated corneas. Genipin promoted corneal proteolysis and host resistance to S. aureus and P. aeruginosa infection by suppressing inflammatory cell infiltration, regulating inflammatory mediators, and downregulating the expression of MMP2 and MMP9.

Bioengineered liver crosslinked with nano-graphene oxide enables efficient liver regeneration via MMP suppression and immunomodulation

Decellularized extracellular matrix scaffold, widely utilized for organ engineering, often undergoes matrix decomposition after transplantation and produces byproducts that cause inflammation, leading to clinical failure. Here we propose a strategy using nano-graphene oxide to modify the biophysical properties of decellularized liver scaffolds. Notably, we demonstrate that scaffolds crosslinked with nano-graphene oxide show high resistance to enzymatic degradation via direct inhibition of matrix metalloproteinase activity and increased mechanical rigidity. We find that M2-like macrophage polarization is promoted within the crosslinked scaffolds, which reduces graft-elicited inflammation. Moreover, we show that low activities of matrix metalloproteinases, attributed to both nano-graphene oxide and tissue inhibitors of metalloproteinases expressed by M2c, can protect the crosslinked scaffolds against in vivo degradation. Lastly, we demonstrate that bioengineered livers fabricated with the crosslinked scaffolds remain functional, thereby effectively regenerating damaged livers after transplantation into liver failure mouse models. Overall, nano-graphene oxide crosslinking prolongs allograft survival and ultimately improves therapeutic effects of bioengineered livers, which offer an alternative for donor organs.

Immunogenicity of decellularized extracellular matrix scaffolds: a bottleneck in tissue engineering and regenerative medicine

Tissue-engineered decellularized extracellular matrix (ECM) scaffolds hold great potential to address the donor shortage as well as immunologic rejection attributed to cells in conventional tissue/organ transplantation. Decellularization, as the key process in manufacturing ECM scaffolds, removes immunogen cell materials and significantly alleviates the immunogenicity and biocompatibility of derived scaffolds. However, the application of these bioscaffolds still confronts major immunologic challenges. This review discusses the interplay between damage-associated molecular patterns (DAMPs) and antigens as the main inducers of innate and adaptive immunity to aid in manufacturing biocompatible grafts with desirable immunogenicity. It also appraises the impact of various decellularization methodologies (i.e., apoptosis-assisted techniques) on provoking immune responses that participate in rejecting allogenic and xenogeneic decellularized scaffolds. In addition, the key research findings regarding the contribution of ECM alterations, cytotoxicity issues, graft sourcing, and implantation site to the immunogenicity of decellularized tissues/organs are comprehensively considered. Finally, it discusses practical solutions to overcome immunogenicity, including antigen masking by crosslinking, sterilization optimization, and antigen removal techniques such as selective antigen removal and sequential antigen solubilization.

From waste to wealth: Repurposing slaughterhouse waste for xenotransplantation

Slaughterhouses produce large quantities of biological waste, and most of these materials are underutilized. In many published reports, the possibility of repurposing this form of waste to create biomaterials, fertilizers, biogas, and feeds has been discussed. However, the employment of particular offal wastes in xenotransplantation has yet to be extensively uncovered. Overall, viable transplantable tissues and organs are scarce, and developing bioartificial components using such discarded materials may help increase their supply. This perspective manuscript explores the viability and sustainability of readily available and easily sourced slaughterhouse waste, such as blood vessels, eyes, kidneys, and tracheas, as starting materials in xenotransplantation derived from decellularization technologies. The manuscript also examines the innovative use of animal stem cells derived from the excreta to create a bioartificial tissue/organ platform that can be translated to humans. Institutional and governmental regulatory approaches will also be outlined to support this endeavor.

Angiogenesis and Re-endothelialization in decellularized scaffolds: Recent advances and current challenges in tissue engineering

Decellularization of tissues and organs has recently become a promising approach in tissue engineering and regenerative medicine to circumvent the challenges of organ donation and complications of transplantations. However, one main obstacle to reaching this goal is acellular vasculature angiogenesis and endothelialization. Achieving an intact and functional vascular structure as a vital pathway for supplying oxygen and nutrients remains the decisive challenge in the decellularization/re-endothelialization procedure. In order to better understand and overcome this issue, complete and appropriate knowledge of endothelialization and its determining variables is required. Decellularization methods and their effectiveness, biological and mechanical characteristics of acellular scaffolds, artificial and biological bioreactors, and their possible applications, extracellular matrix surface modification, and different types of utilized cells are factors affecting endothelialization consequences. This review focuses on the characteristics of endothelialization and how to optimize them, as well as discussing recent developments in the process of re-endothelialization.

A kidney proximal tubule model to evaluate effects of basement membrane stiffening on renal tubular epithelial cells

The kidney tubule consists of a single layer of epithelial cells supported by the tubular basement membrane (TBM), a thin layer of specialized extracellular matrix (ECM). The mechanical properties of the ECM are important for regulating a wide range of cell functions including proliferation, differentiation and cell survival. Increased ECM stiffness plays a role in promoting multiple pathological conditions including cancer, fibrosis and heart disease. How changes in TBM mechanics regulate tubular epithelial cell behavior is not fully understood. Here we introduce a cell culture system that utilizes in vivo-derived TBM to investigate cell-matrix interactions in kidney proximal tubule cells. Basement membrane mechanics was controlled using genipin, a biocompatibility crosslinker. Genipin modification resulted in a dose-dependent increase in matrix stiffness. Crosslinking had a marginal but statistically significant impact on the diffusive molecular transport properties of the TBM, likely due to a reduction in pore size. Both native and genipin-modified TBM substrates supported tubular epithelial cell growth. Cells were able to attach and proliferate to form confluent monolayers. Tubular epithelial cells polarized and assembled organized cell-cell junctions. Genipin modification had minimal impact on cell viability and proliferation. Genipin stiffened TBM increased gene expression of pro-fibrotic cytokines and altered gene expression for N-cadherin, a proximal tubular epithelial specific cell-cell junction marker. This work introduces a new cell culture model for cell-basement membrane mechanobiology studies that utilizes in vivo-derived basement membrane. We also demonstrate that TBM stiffening affects tubular epithelial cell function through altered gene expression of cell-specific differentiation markers and induced increased expression of pro-fibrotic growth factors.

Redox-Activation of Neutrophils Induced by Pericardium Scaffolds

Implantation of scaffolds causes a local inflammatory response whereby the early recruitment of neutrophils is of great importance not only for fighting the infection, but also for facilitating effective regeneration. We used luminol-dependent chemiluminescence, flow cytometry, ELISA, and confocal microscopy to assess the responses of neutrophils after the exposure to the scaffold-decellularized bovine pericardium (collagen type I) crosslinked with genipin (DBPG). We demonstrated that DBPG activated neutrophils in whole blood causing respiratory burst, myeloperoxidase (MPO) secretion, and formation of neutrophil extracellular trap-like structures (NETs). In addition, we studied platelets, another important player of the immediate immune host response. We found that platelets triggered redox-activation of isolated neutrophils by the pericardium scaffold, and likely participate in the NETs formation. Free radicals generated by neutrophils and hypochlorous acid produced by MPO are potent oxidizing agents which can oxidatively degrade biological structures. Understanding the mechanisms and consequences of redox activation of neutrophils by pericardium scaffolds is important for the development of new approaches to increase the efficiency of tissue regeneration.

Collagen-Based Biomimetic Systems to Study the Biophysical Tumour Microenvironment

The extracellular matrix (ECM) is a pericellular network of proteins and other molecules that provides mechanical support to organs and tissues. ECM biophysical properties such as topography, elasticity and porosity strongly influence cell proliferation, differentiation and migration. The cell's perception of the biophysical microenvironment (mechanosensing) leads to altered gene expression or contractility status (mechanotransduction). Mechanosensing and mechanotransduction have profound implications in both tissue homeostasis and cancer. Many solid tumours are surrounded by a dense and aberrant ECM that disturbs normal cell functions and makes certain areas of the tumour inaccessible to therapeutic drugs. Understanding the cell-ECM interplay may therefore lead to novel and more effective therapies. Controllable and reproducible cell culturing systems mimicking the ECM enable detailed investigation of mechanosensing and mechanotransduction pathways. Here, we discuss ECM biomimetic systems. Mainly focusing on collagen, we compare and contrast structural and molecular complexity as well as biophysical properties of simple 2D substrates, 3D fibrillar collagen gels, cell-derived matrices and complex decellularized organs. Finally, we emphasize how the integration of advanced methodologies and computational methods with collagen-based biomimetics will improve the design of novel therapies aimed at targeting the biophysical and mechanical features of the tumour ECM to increase therapy efficacy.

Clickable Biomaterials for Modulating Neuroinflammation

Crosstalk between the nervous and immune systems in the context of trauma or disease can lead to a state of neuroinflammation or excessive recruitment and activation of peripheral and central immune cells. Neuroinflammation is an underlying and contributing factor to myriad neuropathologies including neurodegenerative diseases like Alzheimer’s disease and Parkinson’s disease; autoimmune diseases like multiple sclerosis; peripheral and central nervous system infections; and ischemic and traumatic neural injuries. Therapeutic modulation of immune cell function is an emerging strategy to quell neuroinflammation and promote tissue homeostasis and/or repair. One such branch of ‘immunomodulation’ leverages the versatility of biomaterials to regulate immune cell phenotypes through direct cell-material interactions or targeted release of therapeutic payloads. In this regard, a growing trend in biomaterial science is the functionalization of materials using chemistries that do not interfere with biological processes, so-called ‘click’ or bioorthogonal reactions. Bioorthogonal chemistries such as Michael-type additions, thiol-ene reactions, and Diels-Alder reactions are highly specific and can be used in the presence of live cells for material crosslinking, decoration, protein or cell targeting, and spatiotemporal modification. Hence, click-based biomaterials can be highly bioactive and instruct a variety of cellular functions, even within the context of neuroinflammation. This manuscript will review recent advances in the application of click-based biomaterials for treating neuroinflammation and promoting neural tissue repair.

Detection of HOCl-driven degradation of the pericardium scaffolds by label-free multiphoton fluorescence lifetime imaging

Artificial biomaterials can significantly increase the rate of tissue regeneration. However, implantation of scaffolds leads not only to accelerated tissue healing but also to an immune response of the organism, which results in the degradation of the biomaterial. The synergy of the immune response and scaffold degradation processes largely determines the efficiency of tissue regeneration. Still, methods suitable for fast, accurate and non-invasive characterization of the degradation degree of biomaterial are highly demandable. Here we show the possibility of monitoring the degradation of decellularized bovine pericardium scaffolds under conditions mimicking the immune response and oxidation processes using multiphoton tomography combined with fluorescence lifetime imaging (MPT-FLIM). We found that the fluorescence lifetimes of genipin-induced cross-links in collagen and oxidation products of collagen are prominent markers of oxidative degradation of scaffolds. This was verified in model experiments, where the oxidation was induced with hypochlorous acid or by exposure to activated neutrophils. The fluorescence decay parameters also correlated with the changes of micromechanical properties of the scaffolds as assessed using atomic force microscopy (AFM). Our results suggest that FLIM can be used for quantitative assessments of the properties and degradation of the scaffolds essential for the wound healing processes in vivo.

Recent Advances in Liver Engineering With Decellularized Scaffold

Liver transplantation is currently the only effective treatment for patients with end-stage liver disease; however, donor liver scarcity is a notable concern. As a result, extensive endeavors have been made to diversify the source of donor livers. For example, the use of a decellularized scaffold in liver engineering has gained considerable attention in recent years. The decellularized scaffold preserves the original orchestral structure and bioactive chemicals of the liver, and has the potential to create a de novo liver that is fit for transplantation after recellularization. The structure of the liver and hepatic extracellular matrix, decellularization, recellularization, and recent developments are discussed in this review. Additionally, the criteria for assessment and major obstacles in using a decellularized scaffold are covered in detail.

Membranous Extracellular Matrix-Based Scaffolds for Skin Wound Healing

Membranous extracellular matrix (ECM)-based scaffolds are one of the most promising biomaterials for skin wound healing, some of which, such as acellular dermal matrix, small intestinal submucosa, and amniotic membrane, have been clinically applied to treat chronic wounds with acceptable outcomes. Nevertheless, the wide clinical applications are always hindered by the poor mechanical properties, the uncontrollable degradation, and other factors after implantation. To highlight the feasible strategies to overcome the limitations, in this review, we first outline the current clinical use of traditional membranous ECM scaffolds for skin wound healing and briefly introduce the possible repair mechanisms; then, we discuss their potential limitations and further summarize recent advances in the scaffold modification and fabrication technologies that have been applied to engineer new ECM-based membranes. With the development of scaffold modification approaches, nanotechnology and material manufacturing techniques, various types of advanced ECM-based membranes have been reported in the literature. Importantly, they possess much better properties for skin wound healing, and would become promising candidates for future clinical translation.

Collagen- and hyaluronic acid-based hydrogels and their biomedical applications

Hydrogels have been widely investigated in biomedical fields due to their similar physical and biochemical properties to the extracellular matrix (ECM). Collagen and hyaluronic acid (HA) are the main components of the ECM in many tissues. As a result, hydrogels prepared from collagen and HA hold inherent advantages in mimicking the structure and function of the native ECM. Numerous studies have focused on the development of collagen and HA hydrogels and their biomedical applications. In this extensive review, we provide a summary and analysis of the sources, features, and modifications of collagen and HA. Specifically, we highlight the fabrication, properties, and potential biomedical applications as well as promising commercialization of hydrogels based on these two natural polymers.

A promising potential candidate for vascular replacement materials with anti-inflammatory action, good hemocompatibility and endotheliocyte-cytocompatibility: phytic acid-fixed amniotic membrane

Due to its excellent biocompatibility and anti-inflammatory activity, amniotic membrane (AM) has attracted much attention from scholars. However, its clinical application in vascular reconstruction was limited for poor processability, rapid biodegradation, and insufficient hemocompatibility. A naturally extracted substance with good cytocompatibility, phytic acid (PA), which can quickly form strong and stable hydrogen bonds on the tissue surface, was used to crosslink decellularized AM (DAM) to prepare a novel vascular replacement material. The results showed that PA-fixed AM had excellent mechanical strength and resistance to enzymatic degradation as well as appropriate surface hydrophilicity. Among all samples, 2% PA-fixed specimen showed excellent human umbilical vein endothelial cells (HUVECs)-cytocompatibility and hemocompatibility. It could also stimulate the secretion of vascular endothelial growth factor and endothelin-1 from seeded HUVECs, indicating that PA might promote neovascularization after implantation of PA-fixed specimens. Also, 2% PA-fixed specimen could inhibit the secretion of tumor necrosis factor-αfrom co-cultured macrophages, thus might reduce the inflammatory response after sample implantation. Finally, the results ofex vivoblood test andin vivoexperiments confirmed our deduction that PA might promote neovascularization after implantation. All the results indicated that prepared PA-fixed DAM could be considered as a promising small-diameter vascular replacement material.

Genipin guides and sustains the polarization of macrophages to the pro-regenerative M2 subtype via activation of the pSTAT6-PPAR-gamma pathway

M2 macrophages are associated with deposition of interstitial collagen and other extracellular matrix proteins during the course wound healing and also inflammatory response to biomaterials. Developing advanced biomaterials to promote the M2 subtype may be an effective way to improve tissue reinforcement surgery outcomes. In this study, the effect of genipin, a naturally derived crosslinking agent, on M0 → M2-polarization was investigated. Genipin was introduced either indirectly by seeding cells on aligned collagen biotextiles that are crosslinked by the agent or in soluble form by direct addition to the culture medium. Cellular elongation effects on macrophage polarization induced by the collagen biotextile were also investigated as a potential inducer of macrophage polarization. M0 and M2 macrophages demonstrated significant elongation on the surface of aligned collagen threads, while cells of the M1 subtype-maintained a round phenotype. M0 → M2 polarization, as reflected by arginase and Ym-1 production, was observed on collagen threads only when the threads were crosslinked by genipin, implicating genipin as a more potent inducer of the regenerative phenotype compared to cytoskeletal elongation. The addition of genipin to the culture medium directly also drove the emergence of pro-regenerative phenotype as measured by the markers (arginase and Ym-1) and through the activation of the pSTAT6-PPAR-gamma pathway. This study indicates that genipin-crosslinked collagen biotextiles can be used as a delivery platform to promote regenerative response after biomaterial implantation. STATEMENT OF SIGNIFICANCE: The immune response is one of the key determinants of tissue repair and regeneration rate, and outcome. The M2 macrophage subtype is known to resolve the inflammatory response and support tissue repair by producing pro-regenerative factors. Therefore, a biomaterial that promotes M2 sub-type can be a viable strategy to enhance tissue regeneration. In this study, we investigated genipin-crosslinked electrochemically aligned collagen biotextiles for their capacity to induce pro-regenerative polarization of M0 macrophages. The results demonstrated that genipin, rather than matrix-induced cellular elongation, was responsible for M0 → M2 polarization in the absence of other bioinductive factors and maintaining the M2 polarized status of macrophages. Furthermore, we identified that genipin polarizes the M2 macrophage phenotype via activation of the pSTAT6-PPAR-gamma pathway.

Genipin in an Ex Vivo Corneal Model of Bacterial and Fungal Keratitis

Purpose

To determine whether genipin (a natural crosslinker) could reduce the colonization and proliferation of bacteria and fungi in an ex vivo model of corneal infection.

Methods

This study, using an ex vivo model of bacterial and fungal keratitis, investigated the antimicrobial efficacy of genipin crosslinking. Excised corneoscleral buttons were wounded by scalpel incision and subsequently infected with Staphylococcus aureus, Pseudomonas aeruginosa, or Candida albicans. After inoculation, corneas were treated with genipin for 24 hours at 37°C. Histologic examinations were carried out, and the number of viable colony-forming units (CFU)/cornea was determined.

Results

Genipin exerts bactericidal action against S. aureus and P. aeruginosa, as well as fungicidal action against C. albicans and significantly reduced the CFU compared to contralateral eyes that received saline treatment (P < 0.05).

Conclusions

These data identify genipin as a novel ocular antimicrobial agent that has the potential to be incorporated into the therapeutic armamentarium against microbial keratitis.

Translational Relevance

This study provided evidence for the antimicrobial and antifungal properties of genipin as an alternative crosslinker that could be used in the management of infectious keratitis.

Decellularized scaffold and its elicited immune response towards the host: the underlying mechanism and means of immunomodulatory modification

The immune response of the host towards a decellularized scaffold is complex. Not only can a number of immune cells influence this process, but also the characteristics, preparation and modification of the decellularized scaffold can significantly impact this reaction. Such factors can, together or alone, trigger immune cells to polarize towards either a pro-healing or pro-inflammatory direction. In this article, we have comprehensively reviewed factors which may influence the immune response of the host towards a decellularized scaffold, including the source of the biomaterial, biophysical properties or modifications of the scaffolds with bioactive peptides, drugs and cytokines. Furthermore, the underlying mechanism has also been recapitulated.

Recent advances in optimization of liver decellularization procedures used for liver regeneration

Severe liver diseases have been considered the most common causes of adult deaths worldwide. Until now, liver transplantation is known as the only effective treatment for end stage liver disease. However, it is associated with several problems, most importantly, the side effects of immunosuppressive drugs that should be used after transplantation, and the shortage of tissue donors compared to the increasing number of patients requiring liver transplantation. Currently, tissue/organ decellularization as a new approach in tissue engineering is becoming a valid substitute for managing these kinds of problems. Decellularization of a whole liver is an attractive procedure to create three-dimensional (3D) scaffolds that micro-architecturally and structurally are similar to the native one and could support the repair or replacement of damaged or injured tissue. In this review, the different methods used for decellularization of liver tissue have been reviewed. In addition, the current approaches to overcome the challenges in these techniques are discussed.

Tissue Engineering for Mimics and Modulations of Immune Functions

In the field of regenerative medicine, advances in tissue engineering have surpassed the reconstruction of individual tissues or organs and begun to work towards engineering systemic factors such as immune objects and functions. The immune system plays a crucial role in protecting and regulating systemic functions in the human body. Engineered immune tissues and organs have shown potential in recovering dysfunctions and aplasia of the immune system and the evasion from immune-mediated inflammatory responses and rejection elicited by engineered implants from allogeneic or xenogeneic sources are also being pursued to facilitate clinical transplantation of tissue engineered grafts. Here, current progress in tissue engineering to mimic or modulate immune functions is reviewed and elaborated from two perspectives: 1) engineering of immune tissues and organs per se and 2) immune evasion of host immunoinflammatory rejection by tissue-engineered implants.

Cell Therapy and Bioengineering in Experimental Liver Regenerative Medicine: In Vivo Injury Models and Grafting Strategies

Purpose of Review

To describe experimental liver injury models used in regenerative medicine, cell therapy strategies to repopulate damaged livers and the efficacy of liver bioengineering.

Recent Findings

Several animal models have been developed to study different liver conditions. Multiple strategies and modified protocols of cell delivery have been also reported. Furthermore, using bioengineered liver scaffolds has shown promising results that could help in generating a highly functional cell delivery system and/or a whole transplantable liver.

Summary

To optimize the most effective strategies for liver cell therapy, further studies are required to compare among the performed strategies in the literature and/or innovate a novel modifying technique to overcome the potential limitations. Coating of cells with polymers, decellularized scaffolds, or microbeads could be the most appropriate solution to improve cellular efficacy. Besides, overcoming the problems of liver bioengineering may offer a radical treatment for end-stage liver diseases.

Bioactive potential of natural biomaterials: identification, retention and assessment of biological properties

Biomaterials have had an increasingly important role in recent decades, in biomedical device design and the development of tissue engineering solutions for cell delivery, drug delivery, device integration, tissue replacement, and more. There is an increasing trend in tissue engineering to use natural substrates, such as macromolecules native to plants and animals to improve the biocompatibility and biodegradability of delivered materials. At the same time, these materials have favourable mechanical properties and often considered to be biologically inert. More importantly, these macromolecules possess innate functions and properties due to their unique chemical composition and structure, which increase their bioactivity and therapeutic potential in a wide range of applications. While much focus has been on integrating these materials into these devices via a spectrum of cross-linking mechanisms, little attention is drawn to residual bioactivity that is often hampered during isolation, purification, and production processes. Herein, we discuss methods of initial material characterisation to determine innate bioactivity, means of material processing including cross-linking, decellularisation, and purification techniques and finally, a biological assessment of retained bioactivity of a final product. This review aims to address considerations for biomaterials design from natural polymers, through the optimisation and preservation of bioactive components that maximise the inherent bioactive potency of the substrate to promote tissue regeneration.

In-vivo assessment of a tissue engineered vascular graft computationally optimized for target vessel compliance

Tissue engineered vascular grafts (TEVGs) have the ability to be tuned to match a target vessel's compliance, diameter, wall thickness, and thereby prevent compliance mismatch. In this work, TEVG compliance was manipulated by computationally tuning its layered composition or by manipulating a crosslinking agent (genipin). In particular, these three acelluluar TEVGs were compared: a compliance matched graft (CM_gel - high gelatin content); a hypocompliant PCL graft (HYPO_pcl - high polycaprolactone content); and a hypocompliant genipin graft (HYPO_gen - equivalent composition as CM_gel but hypocompliant via increased genipin crosslinking). All constructs were implanted interpositionally into the abdominal aorta of 21 Sprague Dawley rats (n=7, males=11, females=10) for 28 days, imaged in-vivo using ultrasound, explanted, and assessed for remodeling using immunofluorescence and two photon excitation fluorescence imaging. Compliance matched grafts remained compliance-matched in-vivo compared to the hypocompliant grafts through 4 weeks (p<0.05). Construct degradation and cellular infiltration was increased in the CM_gel and HYPO_gen TEVGs. Contractile smooth muscle cell markers in the proximal anastomosis of the graft were increased in the CM_gel group compared to the HYPO_pcl (p=0.007) and HYPO_gen grafts (p=0.04). Both hypocompliant grafts also had an increased pro-inflammatory response (increased ratio of CD163 to CD86 in the mid-axial location) compared to the CM_gel group. Our results suggest that compliance matching using a computational optimization approach leads to the improved acute (28 day) remodeling of TEVGs. To the authors' knowledge, this is the first in-vivo rat study investigating TEVGs that have been computationally optimized for target vessel compliance.

Decellularized xenografts in regenerative medicine: From processing to clinical application

Decellularized xenografts are an inherent component of regenerative medicine. Their preserved structure, mechanical integrity and biofunctional composition have well established them in reparative medicine for a diverse range of clinical indications. Nonetheless, their performance is highly influenced by their source (ie species, age, tissue) and processing (ie decellularization, crosslinking, sterilization and preservation), which govern their final characteristics and determine their success or failure for a specific clinical target. In this review, we provide an overview of the different sources and processing methods used in decellularized xenografts fabrication and discuss their effect on the clinical performance of commercially available decellularized xenografts.

Post-decellularization techniques ameliorate cartilage decellularization process for tissue engineering applications

Due to the current lack of innovative and effective therapeutic approaches, tissue engineering (TE) has attracted much attention during the last decades providing new hopes for the treatment of several degenerative disorders. Tissue engineering is a complex procedure, which includes processes of decellularization and recellularization of biological tissues or functionalization of artificial scaffolds by active cells. In this review, we have first discussed those conventional steps, which have led to great advancements during the last several years. Moreover, we have paid special attention to the new methods of post-decellularization that can significantly ameliorate the efficiency of decellularized cartilage extracellular matrix (ECM) for the treatment of osteoarthritis (OA). We propose a series of post-decellularization procedures to overcome the current shortcomings such as low mechanical strength and poor bioactivity to improve decellularized ECM scaffold towards much more efficient and higher integration.

Decellularized bone matrix/oleoyl chitosan derived supramolecular injectable hydrogel promotes efficient bone integration

Hydrogels derived from decellularized extracellular matrix (ECM) have been widely used as a bioactive matrix for facilitating functional bone tissue regeneration. However, its poor mechanical strength and fast degradation restricts the extensive use for clinical application. Herein, we present a crosslinked decellularized bone ECM (DBM) and fatty acid modified chitosan (oleoyl chitosan, OC) based biohybrid hydrogel (DBM/OC) for delivering human amnion-derived stem cells (HAMSCs) for bone regeneration. DBM/OC hydrogel were benchmarked against collagen-I/OC (Col-I/OC) based hydrogel in terms of their morphological characteristics, rheological analysis, and biological performances. DBM/OC hydrogel with its endogenous growth factors recapitulates the nanofibrillar 3D tissue microenvironment with improved mechanical strength and also exhibited antimicrobial potential along with superior proliferation/differentiation ability. HAMSCs encapsulation potential of DBM/OC hydrogel was established by well spread cytoskeleton morphology post 14 days of cultivation. Further, ex-vivo chick chorioallantoic membrane (CAM) assay revealed excellent neovascularization potential of DBM/OC hydrogel. Subcutaneously implanted DBM/OC hydrogel did not trigger any severe immune response or infection in the host after 21 days. Also, DBM/OC hydrogels and HAMSCs encapsulated DBM/OC hydrogels were implanted at the tibial defect in a rabbit model to assess the bone regeneration ability. Quantitative micro-CT and histomorphological analysis demonstrated that HAMSCs encapsulated DBM/OC hydrogel can support more mature mineralized bone formation at the defect area compared to DBM/OC hydrogel or SHAM. These findings manifested the efficacy of DBM/OC hydrogel as a functional cell-delivery vehicle and osteoinductive template to accelerate bone regeneration.

Tough pNAGA hydrogel hybridized porcine pericardium for the pre-mounted TAVI valve with improved anti-tearing properties and hemocompatibility

The rate of adoption of transcatheter aortic valve implantation (TAVI) is increasing rapidly, due to the procedure being less invasive. However, TAVI still faces problems relating to durability, the potential incidence of thrombosis, and the inconvenience of storage in glutaraldehyde (Glut) solution. In this work, a tough hydrogel poly(N-acryloyl glycinamide) (pNAGA) is hybridized with Glut-crosslinked porcine pericardium (Glut-PP) via in situ polymerization and glycerolization, so as to obtain dry leafet material for the fabrication of a pre-mounted bioprosthetic heart valve (BHV). The tensile strength, anti-shearing, and anti-tearing properties of the valve are significantly improved by the process of hydrogel hybridization. Following a period of dry-state compression as a simulation for the crimping process of pre-mounted TAV, pNAGA/Glut-PP showed full recovery without structural damage when fully rehydrated. The introduction of pNAGA also improved the blood compatibility of the tissue, with less clot formation and fewer blood cells adhering to the surface of pNAGA/Glut-PP than is found with Glut-PP. Subcutaneous implantation in rats showed that pNAGA/Glut-PP induced a decreased inflammatory response compared with Glut-PP. These results indicate that the strategy for hybridization with hydrogel could be a potential method for preparing pre-mounted TAVs with an improved performance.

Decellularization and engineered crosslinking: a promising dual approach towards bioprosthetic heart valve longevity

OBJECTIVES

METHODS

Bovine and porcine pericardium were decellularized using the standard Triton X/sodium deoxycholate/DNAse/RNAse methodology and thereafter combined incrementally with components of a four-stage high-density dialdehyde-based fixation regimen. Mechanical properties prior to, and calcium levels following, subcutaneous implantation for 6 and 10 weeks in rats were assessed.

RESULTS

Enhanced four-stage crosslinking, independent of decellularization, or decellularization followed by any of the crosslinking regimens, achieved sustained, near-elimination of tissue calcification. Decellularization additionally resulted in significantly lower tissue stiffness and higher fatigue resistance in all groups compared to their non-decellularized counterparts.

CONCLUSIONS

The dual approach of combining decellularization with enhanced crosslinking chemistry in xenogeneic pericardial tissue offers much promise in extending bioprosthetic heart valve longevity.

Decellularized Extracellular Matrix-based Bioinks for Engineering Tissue- and Organ-specific Microenvironments

Biomaterials-based biofabrication methods have gained much attention in recent years. Among them, 3D cell printing is a pioneering technology to facilitate the recapitulation of unique features of complex human tissues and organs with high process flexibility and versatility. Bioinks, combinations of printable hydrogel and cells, can be utilized to create 3D cell-printed constructs. The bioactive cues of bioinks directly trigger cells to induce tissue morphogenesis. Among the various printable hydrogels, the tissue- and organ-specific decellularized extracellular matrix (dECM) can exert synergistic effects in supporting various cells at any component by facilitating specific physiological properties. In this review, we aim to discuss a new paradigm of dECM-based bioinks able to recapitulate the inherent microenvironmental niche in 3D cell-printed constructs. This review can serve as a toolbox for biomedical engineers who want to understand the beneficial characteristics of the dECM-based bioinks and a basic set of fundamental criteria for printing functional human tissues and organs.

Conjugating homogenized liver-extracellular matrix into decellularized hepatic scaffold for liver tissue engineering

The generation of a transplantable liver scaffold is crucial for the treatment of end-stage liver failure. Unfortunately, decellularized liver scaffolds suffer from lack of bioactive molecules and functionality. In this study, we conjugated homogenized liver-extracellular matrix (ECM) into a decellularized liver in a rat model to improve its structural and functional properties. The homogenized ECM was prepared, characterized, and subsequently perfused into ethyl carbodiimide hydrochloride (EDC)/N-hydroxysuccinimide (NHS) activated liver scaffolds. Various techniques were performed to confirm the improvements that were accomplished through the conjugation process; these included micro/ultra-structural analyses, biochemical analysis of ECM components, DNA quantification, swelling ratio, structural stability, calcification properties, platelet activation study, static and dynamic seeding with EAhy926 endothelial cells and HepG2 hepatocarcinoma cells, subcutaneous implantation and intrahepatic transplantation. The results showed that the conjugated scaffolds have superior micro- and ultrastructural and biochemical characteristics. In addition, DNA contents, swelling ratios, calcification properties, platelet reactions, and host inflammatory reactions were not altered with the conjugation process. The conjugated scaffolds revealed better cellular spreading and popularity compared to the non-conjugated scaffolds. Intrahepatic transplantation showed that the conjugated scaffold had higher popularity of hepatic regenerative cells with better angiogenesis. The conjugation of the decellularized liver scaffold with homogenized liver-ECM is a promising tool to improve the quality of the generated scaffold for further transplantation.

Exploiting crosslinked decellularized matrix to achieve uterus regeneration and construction

Decellularized extracellular matrix (dECM) has been considered as a promising scaffold in xenotransplantation, yet natural tissue dECM is often mechanically weak and rapidly degraded, compromising the outcomes. How to restore the mechanical strength and optimise the in vivo degradation, but maintain the microstructure and maximumly suppress the immune rejection, remains challenging. For this aim, we prepared and characterised various crosslinked decellularized rabbit uterus matrix (dUECM) and evaluated in vivo performance after uterus xenotransplantation from rabbit to rat. Naturally derived genipin (GP) and procyanidins (PC) were chosen to crosslink the dUECM, producing significant mechanical enhanced crosslinked-dUECM along with prolonged enzymatic degradation rate. Xenogeneic subcutaneous graft studies revealed that PC- and GP-crosslinked dUECM experienced significant cell infiltration and caused low immune reactions, indicating the desired biocompatibility. In vivo transplantation of GP- and PC-crosslinked dUECM to a uterus circular excised rat yielded excellent recellularization ability and promoted uterus regeneration after 90 days. While the reconstruction efficacy of crosslinked dUECM is highly depended on the crosslinking degree, crosslinking condition must be carefully evaluated to balance the role of crosslinked dECM in mechanical and biological support for tissue regeneration promotion.

A porcine acellular dermal matrix induces human fibroblasts to secrete hyaluronic acid by activating JAK2/STAT3 signalling

Human facial skin undergoes continuous ageing over a lifespan. At present, facial skin rejuvenation is mainly achieved by injecting filling materials. However, conventional materials lack long-term beneficial effects and can only rejuvenate the skin temporarily by physical filling. To overcome this shortcoming, this study developed a porcine acellular dermal matrix with a porous three-dimensional scaffold structure and containing natural growth factors (3D-GF-PADM). The average size of the 3D-GF-PADM particles was 33.415 μm, and the dynamic viscosity and elastic modulus were within ranges suitable for clinical applications. Our study revealed that the 3D-GF-PADM exhibited an extremely low α-gal epitope number (3.15 ± 0.84 × 10¹¹/mg) and DNA content, and no immunotoxicity, but contained abundant TGF-β1, VEGF and other growth factors. More importantly, this 3D-GF-PADM actively induced the synthesis of hyaluronic acid by fibroblasts of the host skin. Study at the molecular level further demonstrated that the 3D-GF-PADM activated the JAK2/STAT3 pathway, resulting in the upregulation of HAS2 expression, which led to an increase in hyaluronic acid synthesis. Our study developed a novel 3D-GF-PADM that can actively induce hyaluronic acid synthesis, which may be used clinically as a skin filling material to achieve long-term skin rejuvenation.

By activating the JAK2/STAT3 pathway, 3D-GF-PADM induces the production of hyaluronic acid in human fibroblasts.

Multiparametric Optical Bioimaging Reveals the Fate of Epoxy Crosslinked Biomeshes in the Mouse Subcutaneous Implantation Model

Biomeshes based on decellularized bovine pericardium (DBP) are widely used in reconstructive surgery due to their wide availability and the attractive biomechanical properties. However, their efficacy in clinical applications is often affected by the uncontrolled immunogenicity and proteolytic degradation. To address this issue, we present here in vivo multiparametric imaging analysis of epoxy crosslinked DBPs to reveal their fate after implantation. We first analyzed the structure of the crosslinked DBP using scanning electron microscopy and evaluated proteolytic stability and cytotoxicity. Next, using combination of fluorescence and hypoxia imaging, X-ray computed microtomography and histology techniques we studied the fate of DBPs after subcutaneous implantation in animals. Our approach revealed high resistance to biodegradation, gradual remodeling of a surrounding tissue forming the connective tissue capsule and calcification of crosslinked DBPs. These changes were concomitant to the development of hypoxia in the samples within 3 weeks after implantation and subsequent induction of angiogenesis and vascularization. Collectively, presented approach provides new insights on the transplantation of the epoxy crosslinked biomeshes, the risks associated with its applications in soft-tissue reconstruction and can be transferred to studies of other types of implants.

Decellularized Annulus Fibrosus Matrix/Chitosan Hybrid Hydrogels with Basic Fibroblast Growth Factor for Annulus Fibrosus Tissue Engineering

Low back pain caused by degenerative disc disease affects many people worldwide and brings huge economical burden. Thus, attentions have focused on annulus fibrosus (AF) tissue engineering for treatment of intervertebral disc degeneration. To engineer a functional replacement for the AF, it is important to fabricate scaffolds that mimic the structural and mechanical properties of native tissue. AF-derived stem cells are promising seed cells for AF tissue engineering due to their tissue specificity. In the present study, decellularized AF matrix (DAFM)/chitosan hybrid hydrogels were fabricated using genipin as a crosslinker. AF stem cells were cultured on hydrogel scaffolds with or without basic fibroblast growth factor (bFGF), and cell proliferation, morphology, gene expression, and AF tissue synthesis were examined. Overall, more collagen-I, collagen-II, and aggrecan were secreted by AF stem cells grown on hydrogels with bFGF compared to those without. These results support the application of DAFM/chitosan hybrid hydrogels as an appropriate candidate for AF tissue engineering. Furthermore, incorporation of bFGF into hydrogels promoted AF-related tissue synthesis.

Extracellular Matrix-Based Biomaterials and Their Influence Upon Cell Behavior

Biologic scaffold materials composed of allogeneic or xenogeneic extracellular matrix (ECM) are commonly used for the repair and remodeling of injured tissue. The clinical outcomes associated with implantation of ECM-based materials range from unacceptable to excellent. The variable clinical results are largely due to differences in the preparation of the material, including characteristics of the source tissue, the method and efficacy of decellularization, and post-decellularization processing steps. The mechanisms by which ECM scaffolds promote constructive tissue remodeling include mechanical support, degradation and release of bioactive molecules, recruitment and differentiation of endogenous stem/progenitor cells, and modulation of the immune response toward an anti-inflammatory phenotype. The methods of ECM preparation and the impact of these methods on the quality of the final product are described herein. Examples of favorable cellular responses of immune and stem cells associated with constructive tissue remodeling of ECM bioscaffolds are described.

Tethering peptides onto biomimetic and injectable nanofiber microspheres to direct cellular response

Biomimetic and injectable nanofiber microspheres (NMs) could be ideal candidate for minimally invasive tissue repair. Herein, we report a facile approach to fabricate peptide-tethered NMs by combining electrospinning, electrospraying, and surface conjugation techniques. The composition and size of NMs can be tuned by varying the processing parameters during the fabrication. Further, bone morphogenic protein-2 (BMP-2) and vascular endothelial growth factor (VEGF) mimicking peptides have been successfully tethered onto poly(ε-caprolactone) (PCL):gelatin:(gelatin-methacryloyl) (GelMA)(1:0.5:0.5) NMs through photocrosslinking of the methacrylic group in GelMA and octenyl alanine (OCTAL) in the modified peptides. The BMP-2-OCTAL peptide-tethered NMs significantly promote osteogenic differentiation of bone marrow-derived stem cells (BMSCs). Moreover, human umbilical vein endothelial cells (HUVECs) seeded on VEGF mimicking peptide QK-OCTAL-tethered NMs significantly up-regulated vascular-specific proteins, leading to microvascularization. The strategy developed in this work holds great potential in developing a biomimetic and injectable carrier to efficiently direct cellular response (Osteogenesis and Angiogenesis) for tissue repair.

Genipin and EDC crosslinking of extracellular matrix hydrogel derived from human umbilical cord for neural tissue repair

Extracellular matrix (ECM) hydrogels, produced by tissue decellularization are natural injectable materials suitable for neural tissue repair. However, the rapid biodegradation of these materials may disrupt neural tissue reconstruction in vivo. The aim of this study was to improve the stability of the previously described ECM hydrogel derived from human umbilical cord using genipin and N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC), crosslinking at concentration of 0.5-10 mM. The hydrogels, crosslinked by genipin (ECM/G) or EDC (ECM/D), were evaluated in vitro in terms of their mechanical properties, degradation stability and biocompatibility. ECM/G, unlike ECM/D, crosslinked hydrogels revealed improved rheological properties when compared to uncrosslinked ECM. Both ECM/G and ECM/D slowed down the gelation time and increased the resistance against in vitro enzymatic degradation, while genipin crosslinking was more effective than EDC. Crosslinkers concentration of 1 mM enhanced the in vitro bio-stability of both ECM/G and ECM/D without affecting mesenchymal stem cell proliferation, axonal sprouting or neural stem cell growth and differentiation. Moreover, when injected into cortical photochemical lesion, genipin allowed in situ gelation and improved the retention of ECM for up to 2 weeks without any adverse tissue response or enhanced inflammatory reaction. In summary, we demonstrated that genipin, rather than EDC, improved the bio-stability of injectable ECM hydrogel in biocompatible concentration, and that ECM/G has potential as a scaffold for neural tissue application.

Liver Bioengineering: Promise, Pitfalls, and Hurdles to Overcome

PURPOSE OF REVIEW

In this review, we discuss the recent advancements in liver bioengineering and cell therapy and future advancements to improve the field towards clinical applications.

RECENT FINDINGS

3D printing, hydrogel-based tissue fabrication, and the use of native decellularized liver extracellular matrix as a scaffold are used to develop whole or partial liver substitutes. The current focus is on developing a functional liver graft through achieving a non-leaky endothelium and a fully constructed bile duct. Use of cell therapy as a treatment is less invasive and less costly compared to transplantation, however, lack of readily available cell sources with low or no immunogenicity and contradicting outcomes of clinical trials are yet to be overcome.

SUMMARY

Liver bioengineering is advancing rapidly through the development of in vitro and in vivo tissue and organ models. Although there are major challenges to overcome, through optimization of the current methods and successful integration of induced pluripotent stem cells, the development of readily available, patient-specific liver substitutes can be achieved.

A novel method for constructing an acellular 3D biomatrix from bovine spinal cord for neural tissue engineering applications

In this study, we aimed at generating 3-dimensional (3D) decellularized bovine spinal cord extracellular matrix-based scaffolds (3D-dCBS) for neural tissue engineering applications. Within this scope, bovine spinal cord tissue pieces were homogenized in 0.1 M NaOH and this viscous mixture was molded to attain 3D bioscaffolds. After resultant bioscaffolds were chemically crosslinked, the decellularization process was conducted with detergent, buffer, and enzyme solutions. Nuclear remnants in the native tissue and 3D-dCBS were determined with DNA content analysis and agarose gel electrophoresis. Afterward, 3D-dCBS were biochemically characterized in depth via glycosaminoglycan (GAG) content, hydroxyproline (HYP) assay, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Cellular survival of human adipose-derived mesenchymal stem cells (hAMSCs) on the 3D-dCBS for 3rd, 7th, and 10th days was assessed via MTT assay. Scaffold and cell/scaffold constructs were also evaluated with scanning electron microscopy and histochemical studies. DNA contents for native and 3D-dCBS were respectively found to be 520.76 ± 18.11 and 28.80 ± 0.20 ng/mg dry weight (n = 3), indicating a successful decellularization process. GAG content, HYP assay, and SDS-PAGE results proved that the extracellular matrix was substantially preserved during the decellularization process. In conclusion, it is believed that the novel decellularization method may allow fabricating 3D bioscaffolds with desired geometry from soft nervous system tissues.

Modulating smooth muscle cell response by the release of TGFβ2 from tubular scaffolds for vascular tissue engineering

Tissue engineering has gained considerable attention in the development of small diameter tissue engineered vascular grafts (TEVGs) for treating coronary heart disease. A properly designed acellular and biodegradable TEVG must encourage the infiltration and growth of vascular smooth muscle cells (SMCs). Our group has previously shown that increasing levels of TGFβ2 can differentially modulate SMC migration and proliferation. In this study, tubular electrospun scaffolds loaded with TGFβ2 were fabricated using various ratios of gelatin/polycaprolactone (PCL), resulting in scaffolds with porous nano-woven architecture suitable for tissue ingrowth. Scaffold morphology, degradation rate, TGβ2 release kinetics, and bioactivity were assessed. TGFβ2 was successfully integrated into the electrospun biomaterial that resulted in a differential release profile depending on the gelatin/PCL ratio over the course of 42 days. Higher TGFβ2 elution was obtained in scaffolds with higher gelatin content, which may be related to the biodegradation of gelatin in culture media. The biological activity of the released TGFβ2 was evaluated by its ability to affect SMC proliferation as a function of its concentration. SMCs seeded on TGFβ2-loaded scaffolds also showed higher densities and infiltration after 5 days in culture as compared to scaffolds without TGFβ2. Our results demonstrate that the ratio of synthetic and natural polymers in electrospun blends can be used to tune the release of TGFβ2. This method can be used to intelligently modulate the SMC response in gelatin/PCL scaffolds making the TGFβ2-loaded conduits attractive for cardiovascular tissue engineering applications.