Welding of silver nanowire networks via flash white light and UV-C irradiation for highly conductive and reliable transparent electrodes

One-Stop Strategy for Obtaining Controllable Sensitivity and Feasible Self-Patterning in Silver Nanowires/Elastomer Nanocomposite-Based Stretchable Ultrathin Strain Sensors

In this study, selective photo-oxidation (SPO) is proposed as a simple, fast, and scalable one-stop strategy that enables simultaneous self-patterning and sensitivity adjustment of ultrathin stretchable strain sensors. The SPO of an elastic substrate through irradiation time-controlled ultraviolet treatment in a confined region enables precise tuning of both the surface energy and the elastic modulus. SPO induces the hydrophilization of the substrate, thereby allowing the self-patterning of silver nanowires (AgNWs). In addition, it promotes the formation of nonpermanent microcracks of AgNWs/elastomer nanocomposites under the action of strain by increasing the elastic modulus. This effect improves sensor sensitivity by suppressing the charge transport pathway. Consequently, AgNWs are directly patterned with a width of 100 μm or less on the elastic substrate, and AgNWs/elastomer-based ultrathin and stretchable strain sensors with controlled sensitivity work reliably in various operating frequencies and cyclic stretching. Sensitivity-controlled strain sensors successfully detect both small and large movements of the human hand.

Flexible Nanocomposite Conductors for Electromagnetic Interference Shielding

HIGHLIGHTS

Convincing candidates of flexible (stretchable/compressible) electromagnetic interference shielding nanocomposites are discussed in detail from the views of fabrication, mechanical elasticity and shielding performance. Detailed summary of the relationship between deformation of materials and electromagnetic shielding performance. The future directions and challenges in developing flexible (particularly elastic) shielding nanocomposites are highlighted. With the extensive use of electronic communication technology in integrated circuit systems and wearable devices, electromagnetic interference (EMI) has increased dramatically. The shortcomings of conventional rigid EMI shielding materials include high brittleness, poor comfort, and unsuitability for conforming and deformable applications. Hitherto, flexible (particularly elastic) nanocomposites have attracted enormous interest due to their excellent deformability. However, the current flexible shielding nanocomposites present low mechanical stability and resilience, relatively poor EMI shielding performance, and limited multifunctionality. Herein, the advances in low-dimensional EMI shielding nanomaterials-based elastomers are outlined and a selection of the most remarkable examples is discussed. And the corresponding modification strategies and deformability performance are summarized. Finally, expectations for this quickly increasing sector are discussed, as well as future challenges.

Advances in constructing silver nanowire-based conductive pathways for flexible and stretchable electronics

With their soaring technological demand, flexible and stretchable electronics have attracted many researchers' attention for a variety of applications. The challenge which was identified a decade ago and still remains, however, is that the conventional electrodes based on indium tin oxide (ITO) are not suitable for ultra-flexible electronic devices. The main reason is that ITO is brittle and expensive, limiting device performance and application. Thus, it is crucial to develop new materials and processes to construct flexible and stretchable electrodes with superior quality for next-generation soft devices. Herein, various types of conductive nanomaterials as candidates for flexible and stretchable electrodes are briefly reviewed. Among them, silver nanowire (AgNW) is selected as the focus of this review, on account of its excellent conductivity, superior flexibility, high technological maturity, and significant presence in the research community. To fabricate a reliable AgNW-based conductive network for electrodes, different processing technologies are introduced, and the corresponding characteristics are compared and discussed. Furthermore, this review summarizes strategies and the latest progress in enhancing the conductive pathway. Finally, we showcase some exemplary applications and provide some perspectives about the remaining technical challenges for future research.

Recent Advances in Flexible Sensors and Their Applications

Flexible sensors are low cost, wearable, and lightweight, as well as having a simple structure as per the requirements of engineering applications. Furthermore, for many potential applications, such as human health monitoring, robotics, wearable electronics, and artificial intelligence, flexible sensors require high sensitivity and stretchability. Herein, this paper systematically summarizes the latest progress in the development of flexible sensors. The review briefly presents the state of the art in flexible sensors, including the materials involved, sensing mechanisms, manufacturing methods, and the latest development of flexible sensors in health monitoring and soft robotic applications. Moreover, this paper provides perspectives on the challenges in this field and the prospect of flexible sensors.

Advances in Flexible Metallic Transparent Electrodes

Transparent electrodes (TEs) are pivotal components in many modern devices such as solar cells, light-emitting diodes, touch screens, wearable electronic devices, smart windows, and transparent heaters. Recently, the high demand for flexibility and low cost in TEs requires a new class of transparent conductive materials (TCMs), serving as substitutes for the conventional indium tin oxide (ITO). So far, ITO has been the most used TCM despite its brittleness and high cost. Among the different emerging alternative materials to ITO, metallic nanomaterials have received much interest due to their remarkable optical-electrical properties, low cost, ease of manufacturing, flexibility, and widespread applicability. These involve metal grids, thin oxide/metal/oxide multilayers, metal nanowire percolating networks, or nanocomposites based on metallic nanostructures. In this review, a comparison between TCMs based on metallic nanomaterials and other TCM technologies is discussed. Next, the different types of metal-based TCMs developed so far and the fabrication technologies used are presented. Then, the challenges that these TCMs face toward integration in functional devices are discussed. Finally, the various fields in which metal-based TCMs have been successfully applied, as well as emerging and potential applications, are summarized.

High-performance silver nanowires transparent conductive electrodes fabricated using manufacturing-ready high-speed photonic sinterization solutions

On the long road towards low-cost flexible hybrid electronics, integration and printable solar energy harvesting solutions, there is an urgent need for high-performance transparent conductive electrodes produced using manufacturing-ready techniques and equipment. In recent years, randomly-distributed metallic nanowire-based transparent mesh electrodes have proven highly-promising as they offer a superb compromise between high performances and low fabrication costs. Unfortunately, these high figure-of-merit transparent mesh electrodes usually rely heavily on extensive post-deposition processing. While conventional thermal annealing yields good performances, it is especially ill-suited for deposition on low-temperature substrates or for high-throughput manufacturing solutions. Similarly, laser-induced annealing severely limits the processing time for electrodes covering large surfaces. In this paper, we report the fabrication of ultra high-performance silver nanowires-based transparent conductive electrodes fabricated using optimized manufacturing-ready ultrafast photonic curing solutions. Using conventional indium tin oxide (ITO) as our benchmark for transparent electrodes, we demonstrate a 2.6–2.7 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\times $$\end{document}× performance gain using two different figure-of-merit indicators. Based on these results, we believe this research provides an ideal manufacturing-ready approach for the large-scale and low-cost fabrication of ultra high-performance transparent electrodes for flexible hybrid electronics and solar-energy harvesting applications.

Semitransparent Perovskite Solar Cells with Enhanced Light Utilization Efficiencies by Transferable Ag Nanogrid Electrodes

Solar cells that are semitransparent and highly efficient can find diverse applications in automobile windows, building walls, and wearable devices. Here, we present a semitransparent perovskite thin-film solar cell with an Ag nanogrid transparent electrode, where electrospun poly(ethylene oxide) (PEO) nanofibers are used as an etching mask. Directional electrospinning has allowed us to obtain a grid-shaped electrode of well-aligned Ag nanogrids. The performance of transparent electrodes can be controlled by the electrospinning conditions and the choice of substrate materials. We theoretically analyze the transmittance and sheet resistance of the electrode. Furthermore, transferable Ag nanogrid transparent electrodes are fabricated on poly(dimethylsiloxane) (PDMS) substrates for application in semitransparent perovskite solar cells. Using an electrode that shows a high transmittance (92.7%) with a low sheet resistance (18.0 Ω·sq^-1), a semitransparent perovskite thin-film solar cell demonstrates average visible wavelength transmittance, power conversion efficiency, and light utilization efficiency rates as high as 25.2, 12.7, and 3.21%, respectively.

Rapid nanowelding of silver nanowires by focused-light-scanning for high-performance flexible transparent electrodes

Silver nanowires (AgNWs) have been considered as one of the most promising flexible transparent electrodes (FTEs) material for next-generation optoelectronic devices. However, the large contact resistance between AgNWs could deteriorate the conductivity of FTEs. In the present work, high-performance AgNWs FTEs were obtained by means of focused-light-scanning (FLS), which could lead to the large-area, rapid and high-quality welding between AgNWs within a short time, forming the reliable and stable AgNWs network. The results of the optoelectronic tests show that after FLS, the sheet resistance of the AgNWs FTEs sharply decreased from 5113 Ω/sq to 7.7 Ω/sq, with maintaining a high transmittance (∼94%). Finally, a high-performance flexible transparent heater was fabricated by using FLS, showing reach a relatively high temperature in a short response time and rapid response at low input voltage. The findings offer an effective pathway to greatly improve the conductivity of AgNWs FTEs.

Flashlight-Induced Strong Self-Adhesive Surface on a Nanowire-Impregnated Transparent Conductive Film

The flashlight annealing process has been widely used in the field of flexible and printed electronics because it can instantly induce chemical and structural modifications over a large area on an electronic functional layer in a subsecond time range. In this study, for the first time, we explored a straightforward method to develop strong self-adhesion on a metal nanowire-based flexible and transparent conductive film via flashlight irradiation. Nanowire interlocking, for strong mechanical bonding at the interface between the nanowires and polyamide film, was achieved by simple hot pressing. Then, by irradiating the nanowire-impregnated film with a flashlight, several events such as interdiffusion and melting of surface polymers could be induced along with morphological changes leading to an increase in the film surface area. As a result, the surface of the fabricated film exhibited strong interfacial interactions while forming intimate contact with the heterogeneous surfaces of other objects, thereby becoming strongly self-adhesive. This readily achievable, self-attachable, flexible, and transparent electrode allowed the self-interconnection of a light-emitting diode chip, and it was also compatible for various applications, such as defogging windows and transparent organic light-emitting diodes.

A review of flexible force sensors for human health monitoring

BACKGROUND

In recent years, health monitoring systems (HMS) have aroused great interest due to their broad prospects in preventive medicine. As an important component of HMS, flexible force sensors (FFS) with high flexibility and stretch-ability can monitor vital health parameters and detect physical movements.

AIM OF REVIEW

In this review, the novel materials, the advanced additive manufacturing technologies, the selective sensing mechanisms and typical applications in both wearable and implantable HMS are discussed.

KEY SCIENTIFIC CONCEPTS AND IMPORTANT FINDINGS OF REVIEW

We recognized that the next generation of the FFS will have higher sensitivity, wider linear range as well as better durability, self-power supplied and multifunctional integrated. In conclusion, the FFS will provide powerful socioeconomic benefits and improve people's quality of life in the future.

Large-Area Tunable Red/Green/Blue Tri-Stacked Quantum Dot Light-Emitting Diode Using Sandwich-Structured Transparent Silver Nanowires Electrodes

Quantum dot light-emitting diodes (QLEDs), particularly those capable of emitting light with tunable colors, have attracted the attention of researchers for their variability in lighting and displays. So far, various color-tunable QLEDs have been developed using techniques of inkjet printing or white light combining with color filters (CFs), which however suffered from difficulties in mass production. Here, by inserting an insulating resin layer between two conductive silver nanowire (AgNW) layers, a unique AgNWs/resin/AgNWs (A/R/A) sandwich-structured electrode was developed, showing rather small sheet resistances at both sides and high transparency. The as-prepared A/R/A electrode is applicable for making a large-area transparent red QLED with an external quantum efficiency (EQE) of 11.42% and a transmittance of 72.5%. Furthermore, the A/R/A electrode can be used as intermediate connecting electrodes to stack three single-colored QLEDs, forming a novel structured R/G/B tri-stacked QLED, which enables emission not only of primary colors red, green, and blue independently with the maximum EQE of 8.22, 8.07, and 2.28%, respectively, but also arbitrary hybrid colors that cover a 107% National Television System Committee (NTSC) color triangle. Such large-area full-color-tunable tri-stacked QLED offers new perspectives for the next-generation solid-state scene lighting and full-color displays.

The surface plasmonic welding of silver nanowires via intense pulsed light irradiation combined with NIR for flexible transparent conductive films

In this work, surface plasmonic welding of silver nanowires (AgNWs) by intense pulse light (IPL) combined with NIR was investigated. AgNWs were coated on a flexible PET (polyethylene terephthalate) substrate using a bar-coater. The coated AgNW films were welded at room temperature and under ambient conditions by white IPL from a xenon lamp, assisted with light from a UV-C (ultraviolet C) and NIR (near infra-red) lamp using an in-house multi-wavelength IPL welding system. In order to investigate the welding mechanism, in situ monitoring with a Wheatstone bridge electrical circuit was performed. The sheet resistance changes of AgNW films during the welding process were monitored under various IPL conditions (e.g. light energy and on-time) with and without UV-C and NIR light irradiation. The microstructure of the welded AgNW film and the interface between the AgNW film and the PET substrate were observed using a scanning electron microscope (SEM) and transmission electron microscope (TEM). COMSOL multi-physics simulations were conducted and compared with the in situ monitoring results to discuss the in-depth mechanism of the IPL welding of AgNWs and its dependence on the wavelength of light. From this study, the optimal IPL welding conditions and appropriate wavelength were suggested, and the optimized IPL welding process could produce AgNW film with a lower sheet resistance (45.2 Ω sq^-1) and high transparency (96.65%) without damaging the PET substrate.

Programmed Ultrafast Scan Welding of Cu Nanowire Networks with a Pulsed Ultraviolet Laser Beam for Transparent Conductive Electrodes and Flexible Circuits

Metal nanowires (NWs) have shown superior advances for the next-generation transparent conducting (TC) materials. Most concerns were focused on uniform conductive films; however, fabrication of a programmed circuit is still lacking. Here, we demonstrate a programmable ultrafast welding method by pulsed laser beam scanning under ambient conditions to achieve a Cu NW pattern-free TC circuit as well as various size films. High-aspect ratio Cu NWs (> 3000) are synthesized through an oleylamine-mediated solution system. Pulsed ultraviolet laser irradiation together with a programmed moving station is set up for the welding of Cu NW networks. Finite element simulations reveal that the transient heating by efficient absorption of UV light (∼ 250 nm) could remove the organic residues on the surface and realize local welding of interlaced NW junctions. With only 10 ms pulsed irradiation, high optoelectronic performance (33 ohm/sq. at 87% transmittance at 550 nm) and excellent stability of the Cu NW TC film have been achieved. The line-by-line and selected route scanning modes could rapidly make large area TC films and directly write flexible circuits. Moreover, completely transparent micron-size UV and blue LED chips are fabricated and successfully lit with bright emission. This method opens up a future way of circuit and device fabrication by direct one-step laser writing.

Degradation problem in silver nanowire transparent electrodes caused by ultraviolet exposure

Silver nanowire (AgNW) transparent electrode inevitably encounters ultraviolet (UV) irradiation from the environment, leading to stability and durability problems when in operation. Since UVA is the most abundant UV band and highly penetrating to AgNW related optoelectrical devices, it is crucial to understand the UVA damage caused to AgNWs. In this study, transparent electrodes composed of pristine AgNWs and glass substrates were manufactured with optimized processing parameters, and then used as model samples for aging tests. UVA exposure was conducted at elevated temperatures including 45 °C, 60 °C and 75 °C at 12 ± 5.5% relative humidity (RH) conditions. Comparative aging tests using conditions of damp heat (85 °C/85% RH) and 105 °C without UV (dark conditions) were also conducted. The relationship between optoelectrical property degradation, morphological changes and photo-corrosion was discussed. Under UVA exposure, the sheet resistance of electrodes increased gradually in an induction period before an abrupt change occurred. A nominal sheet resistance value of 200 Ω/sq was considered as a predestined failure of electrical property. It took 16, 24 and 60 h for UVA exposure at 75 °C, 60 °C and 45 °C, respectively, and 288 h by damp heat aging to degrade to the same status of predestined failure. Aging results of dark conditions indicated no degradation effect on AgNWs for 126 d aging. Moisture caused a different mechanism in damaging the capping agents on AgNWs. Nanocubes of silver chloride and sodium chloride were prone to precipitate at higher aging temperature such as 75 °C with UVA exposure. Sulfidation accounted for deterioration of optical transmittance, and occurred significantly at 45 °C with UVA irradiation and under damp heat conditions. The synergistic aging effect of UVA irradiance at elevated temperature on AgNW degradation has been unambiguously demonstrated. The results of this study provide guidelines for the design of optoelectronic devices when utilizing AgNW transparent electrodes.

Self-Limited Nanosoldering of Silver Nanowires for High-Performance Flexible Transparent Heaters

Silver nanowires (Ag NWs) are key materials to fabricate next-generation flexible transparent electrodes (FTEs). Currently, the applications of Ag NWs are impeded by the large wire-wire contact resistance. Herein, a self-limited nanosoldering method is proposed to reduce the contact resistance by epitaxially depositing silver nanosolders at the Ag NW junctions, which have a negligible effect on the optical transparency, while decreasing the sheet resistance of the Ag NW film from 18.6 to 7.7 Ω/sq at a transmittance of 90%. In addition, the deposited nanosolders at the junctions remarkably improve the electrical and mechanical stabilities of the Ag NW electrodes. Notably, this simple nanosoldering process can be rapidly conducted under room temperature and ambient conditions and is free of any technical support or specific equipment. This technique is easily applied to the nanosoldering of 210 × 297 mm FTEs. Based on these FTEs, a high-performance flexible transparent heater with a sheet resistance 3.7 Ω/sq at a transmittance of 82.5% is constructed. Because of the high heating rate (4.8 °C/s), the heater can produce uniform heating (145 °C) at a short response time (30 s) and low input voltage (6 V).

Flexible Sensors—From Materials to Applications

Flexible sensors have the potential to be seamlessly applied to soft and irregularly shaped surfaces such as the human skin or textile fabrics. This benefits conformability dependant applications including smart tattoos, artificial skins and soft robotics. Consequently, materials and structures for innovative flexible sensors, as well as their integration into systems, continue to be in the spotlight of research. This review outlines the current state of flexible sensor technologies and the impact of material developments on this field. Special attention is given to strain, temperature, chemical, light and electropotential sensors, as well as their respective applications.

Efficient metallic nanowire welding using the Eddy current method

In this study, metallic nanowires (M-NWs) such as silver nanowires (AgNWs) and copper nanowires (CuNWs) were welded only at junctions resistively by a novel method using an indirect Eddy current through an inductive power transfer. By applying an inductive power of 45 kHz alternating current power indirectly for 6 s to the M-NW network deposited on polymer substrates, a decrease of sheet resistance up to ∼67.9% for AgNWs and ∼49.9% for CuNWs could be obtained without changing the optical transmittance. For AgNWs, after the welding a decrease of surface roughness could also be observed from 44.5 nm to 26.3 nm, which is similar to the height of a single layer AgNW (22.2 nm) for a bilayer junction. For AgNWs coated on a transparent flexible substrate, after the cyclic bending of 10 000 times, no change of resistance (ΔR/R0) of the AgNWs after the welding was observed and the welded AgNWs were not easily peeled off from the substrate. It is believed that this novel welding method can be applied not only to all kinds of M-NWs on various flexible low-temperature polymer substrates, but also to large areas at a short time and at low cost.

Rapid Pulsed Light Sintering of Silver Nanowires on Woven Polyester for personal thermal management with enhanced performance, durability and cost-effectiveness

Fabric-based personal heating patches have small geometric profiles and can be attached to selected areas of garments for personal thermal management to enable significant energy savings in built environments. Scalable fabrication of such patches with high thermal performance at low applied voltage, high durability and low materials cost is critical to the widespread implementation of these energy savings. This work investigates a scalable Intense Pulsed Light (IPL) sintering process for fabricating silver nanowire on woven polyester heating patches. Just 300 microseconds of IPL sintering results in 30% lesser electrical resistance, 70% higher thermal performance, greater durability (under bending up to 2 mm radius of curvature, washing, humidity and high temperature), with only 50% the added nanowire mass compared to state-of-the-art. Computational modeling combining electromagnetic and thermal simulations is performed to uncover the nanoscale temperature gradients during IPL sintering, and the underlying reason for greater durability of the nanowire-fabric after sintering. This large-area, high speed, and ambient-condition IPL sintering process represents an attractive strategy for scalably fabricating personal heating fabric-patches with greater thermal performance, higher durability and reduced costs.

Au80Sn20-based targeted noncontact nanosoldering with low power consumption

Energy-efficient nanosoldering technology for realizing connections at the nanoscale is a long-sought-after goal for constructing advanced optoelectronic nanodevices. However, the ability to achieve noncontact handling, low power consumption, and targeted nanosoldering remains a challenge. In this work, we demonstrate a method of targeted photothermal-induced nanosoldering of silver nanowires, which uses Au₈₀Sn₂₀ alloy nanowires as the nanosolder and a 532 nm continuous wave laser as the heat source. The required power for fusing the Au₈₀Sn₂₀ solder is reduced by a factor of 55 compared to the previously demonstrated Ag self-nanosolder case. Construction of a few typical nanostructures (including "X"-, "Y"-, and "-"-shaped junctions) is achieved with this method. Besides its low power consumption, it also provides advantages including noncontact and targeted soldering, thereby introducing new avenues for fabricating complex nanostructures and advanced functional nanodevices.

Light sintering of ultra-smooth and robust silver nanowire networks embedded in poly(vinyl-butyral) for flexible OLED

A conductive, uniform, and ultra-smooth flexible transparent composite film is produced by embedding silver nanowires (AgNWs) into poly(vinyl-butyral) (PVB) without pressure or high-temperature annealing. The adhesion of AgNWs was greatly improved by embedding them in PVB, and surface roughness and sheet resistance (Rs) improvements were achieved through the use of the intense pulsed light (IPL) method, which welds the interconnections among AgNWs in a short time without heat or pressure treatment. The sheet resistance of PVB/AgNWs with the IPL(PAI) composite film reaches 12.6 ohm/sq with a transmittance of 85.7% (at 550 nm); no clear changes in the sheet resistance are observed after a substrate bending and tape test, suggesting excellent flexibility. In the case of PAI, the change in sheet resistance was only 2.6% after a 2,000-bend test, and the resulting bending radius was less than 1 mm. When IPL was exposed to PVB/AgNWs, the figure of merit was 2.36 times higher than that without exposure. Finally, flexible OLEDs using PAI exhibited comparable or higher electroluminescent characteristics than other devices with well-known flexible electrodes-including indium-zinc-oxide on polymer plastic-which is a promising discovery for flexible optoelectronic applications.

Selective Wavelength Plasmonic Flash Light Welding of Silver Nanowires for Transparent Electrodes with High Conductivity

In this work, silver nanowires (AgNWs) printed on a polyethylene terephthalate substrate using a bar coater were welded via selective wavelength plasmonic flash light irradiation. To achieve high electrical conductivity and transparent characteristics, the wavelength of the flash white light was selectively chosen and irradiated by using high-pass, low-pass, and band-pass filters. The flash white light irradiation conditions such as on-time, off-time, and number of pulses were also optimized. The wavelength range (400-500 nm) corresponding to the plasmonic wavelength of the AgNW could efficiently weld the AgNW films and enhance its conductivity. To carry out in-depth study of the welding phenomena with respect to wavelength, a multiphysics COMSOL simulation was conducted. The welded AgNW films under selective plasmonic flash light welding conditions showed the lowest sheet resistance (51.275 Ω/sq) and noteworthy transmittance (95.3%). Finally, the AgNW film, which was welded by selective wavelength plasmonic flash light with optical filters, was successfully used to make a large area transparent heat film and dye-sensitized solar cells showing superior performances.

Conductivity enhancement of silver nanowire networks via simple electrolyte solution treatment and solvent washing

As a promising replacement material for indium tin oxide in flexible electronics, silver nanowires (AgNWs) usually need complicated post-treatment to reduce the high contact resistance across the intersections when used as transparent conductive films. In this work, a widely applicable nano-joining method for improving the overall conductivity of AgNW networks with different kinds of electrolyte solutions is presented. By treatment with an electrolyte solution with appropriate ionic strengths, the insulating surfactant layer (polyvinylpyrrolidone, PVP) on the AgNWs could be desorbed, and the AgNW network could be densified. The sheet resistance of the AgNW film on a glass slide is reduced by 60.9% (from 67.5 to 26.4 Ohm sq^-1) with a transmittance of 92.5%. High-resolution transmission electron microscopy analysis indicates that atomic diffusion occurs at the intersection of two AgNWs. Thus, metallurgical bonding on the nanometer scale is achieved across the junctions of the AgNWs, leading to a significant enhancement in the conductivity of the AgNW network.

Dictating anisotropic electric conductivity of a transparent copper nanowire coating by the surface structure of wood

In this article, a robust, air-stable, flexible and transparent copper (Cu) nanowire (NW) network coating on the surface of the wood is presented, based on a fusion welding of the Cu NWs by photonic curing. Thereby, an anisotropic conductivity can be achieved, which is originating from the structural organization of the wood body and its surface. Furthermore, the Cu NWs are protected from oxidation or wear by a commercially available paraffin wax-polyolefin, which also results in surface water repellency. The developed processing steps present a facile and flexible routine for applying Cu NW transparent conductors to abundant biomaterials and solve current manufacturing obstacles for corrosion-resistant circuits while keeping the natural appearance of the substrate. It may open a venue for more extensive utilization of materials from renewable resources such as wood for electronic devices in smart buildings or mobility applications.