Self-Assembly of Amphiphilic Block Copolypeptoids - Micelles, Worms and Polymersomes

Degradable Polymer-Based Nanoassemblies for Precise Targeting and Drug Delivery to Breast Cancer Cells without Affecting Normal Healthy Cells

Stimuli-responsive amphiphilic polymers are known to be precursors to forming promising nanoarchitectonics with tunable properties for application in biomedical sciences. Currently, self-immolative polymers are widely recognized as an emerging class of responsive materials with excellent degradability, which is one of the crucial criteria for designing a robust drug delivery vehicle. Here, we design an amphiphilic polyurethane endowed with a redox-responsive self-immolative linker and a pH-responsive tertiary amine on the backbone, which forms entropy-driven nanoscale supramolecular assemblies (average hydrodynamic diameter ∼110 nm) and is programmed to disassemble in a redox environment (GSH) due to the degradation of the polymer in a self-immolative fashion. The nanoassembly shows efficient drug sequestration and release in a controlled manner in response to glutathione (10 mM). The tertiary amine residing on the surface of the nanoassembly becomes protonated in the tumor microenvironment (pH ∼ 6.4-6.8) and generates positively charged nanoassembly (ζ-potential = +36 mV), which enhances the cancer cell-selective cellular uptake. The biological evaluation of the drug-loaded nanoassembly revealed triple-negative breast cancer (MDAMB-231) selective internalization and cell death while shielding normal cells (RBCs or PBMCs) from off-targeting toxicity. We envision that polyurethane with a redox-responsive self-immolative linker might open up new opportunities for a completely degradable polyurethane-based nanocarrier for drug delivery and diagnosis applications.

Martinoid: the peptoid martini force field

Many exciting innovations have been made in the development of assembling peptoid materials. Typically, these have utilised large oligomeric sequences, though elsewhere the study of peptide self-assembly has yielded numerous examples of assemblers below 6-8 residues in length, evidencing that minimal peptoid assemblers are not only feasible but expected. A productive means of discovering such materials is through the application of in silico screening methods, which often benefit from the use of coarse-grained molecular dynamics (CG-MD) simulations. At the current level of development, CG models for peptoids are insufficient and we have been motivated to develop a Martini forcefield compatible peptoid model. A dual bottom-up and top-down parameterisation approach has been adopted, in keeping with the Martini parameterisation methodology, targeting the reproduction of atomistic MD dynamics and trends in experimentally obtained log D7.4 partition coefficients, respectively. This work has yielded valuable insights into the practicalities of parameterising peptoid monomers. Additionally, we demonstrate that our model can reproduce the experimental observations of two very different peptoid assembly systems, namely peptoid nanosheets and minimal tripeptoid assembly. Further we can simulate the peptoid helix secondary structure relevant for antimicrobial sequences. To be of maximum usefulness to the peptoid research community, we have developed freely available code to generate all requisite simulation files for the application of this model with Gromacs MD software.

Minimal Peptoid Dynamics Inform Self-Assembly Propensity

Peptoids are structural isomers of natural peptides, with side chain attachment at the amide nitrogen, conferring this class of compounds with the ability to access both cis and trans ω torsions as well as an increased diversity of ψ/φ states with respect to peptides. Sampling within these dimensions is controlled through side chain selection, and an expansive set of viable peptoid residues exists. It has been shown recently that "minimal" di- and tripeptoids with aromatic side chains can self-assemble into highly ordered structures, with size and morphological definition varying as a function of sequence pattern (e.g., XFF and FXF, where X = a nonaromatic peptoid monomer). Aromatic groups, such as phenylalanine, are regularly used in the design of minimal peptide assemblers. In recognition of this, and to draw parallels between these compounds classes, we have developed a series of descriptors for intramolecular dynamics of aromatic side chains to discern whether these dynamics, in a preassembly condition, can be related to experimentally observed nanoscale assemblies. To do this, we have built on the atomistic peptoid force field reported by Weiser and Santiso (CGenFF-WS) through the rigorous fitting of partial charges and the collation of Charmm General Force Field (CGenFF) parameters relevant to these systems. Our study finds that the intramolecular dynamics of side chains, for a given sequence, is dependent on the specific combination of backbone ω torsions and that homogeneity of sampling across these states correlates well with the experimentally observed ability to assemble into nanomorphologies with long-range order. Sequence patterning is also shown to affect sampling, in a manner consistent for both tripeptoids and tripeptides. Additionally, sampling similarities between the nanofiber forming tripeptoid, Nf-Nke-Nf in the cc state, and the nanotube forming dipeptide FF, highlight a structural motif which may be relevant to the emergence of extended linear assemblies. To assess these properties, a variety of computational approaches have been employed.

Recent Advances in Nanoparticle Development for Drug Delivery: A Comprehensive Review of Polycaprolactone-Based Multi-Arm Architectures

Controlled drug delivery is a crucial area of study for improving the targeted availability of drugs; several polymer systems have been applied for the formulation of drug delivery vehicles, including linear amphiphilic block copolymers, but with some limitations manifested in their ability to form only nanoaggregates such as polymersomes or vesicles within a narrow range of hydrophobic/hydrophilic balance, which can be problematic. For this, multi-arm architecture has emerged as an efficient alternative that overcame these challenges, with many interesting advantages such as reducing critical micellar concentrations, producing smaller particles, allowing for various functional compositions, and ensuring prolonged and continuous drug release. This review focuses on examining the key variables that influence the customization of multi-arm architecture assemblies based on polycaprolactone and their impact on drug loading and delivery. Specifically, this study focuses on the investigation of the structure-property relationships in these formulations, including the thermal properties presented by this architecture. Furthermore, this work will emphasize the importance of the type of architecture, chain topology, self-assembly parameters, and comparison between multi-arm structures and linear counterparts in relation to their impact on their performance as nanocarriers. By understanding these relationships, more effective multi-arm polymers can be designed with appropriate characteristics for their intended applications.

Biocides and techniques for their encapsulation: a review

Biocides are compounds that are broadly used to protect products and equipment against microbiological damage. Encapsulation can effectively increase physicochemical stability and allow for controlled release of encapsulated biocides. We categorized microencapsulation into coacervation, sol-gel, and self-assembly methods. The former comprises internal phase separation, interfacial polymerization, and multiple emulsions, and the latter include polymersomes and layer-by-layer techniques. The focus of this review is the description of these categories based on their microencapsulation methods and mechanisms. We discuss the key features and potential applications of each method according to the characteristics of the biocide to be encapsulated, relating the solubility of biocides to the capsule-forming materials, the reactivity between them and the desired release rate. The role of encapsulation in the safety and toxicity of biocide applications is also discussed. Furthermore, future perspectives for biocide applications and encapsulation techniques are presented.

Amphiphilic Polymers for Color Dispersion: Toward Stable and Low-Viscosity Inkjet Ink

Amphiphilic random and block copolymers were synthesized as potential inkjet inks. This study evaluated the potential of these polymers for color dispersion by examining the following factors: surface tension, zeta potential, viscosity, and particle size. Acrylic acid and (ethoxyethoxy)ethyl acrylate were used as the hydrophilic molecular units. Styrene, butyl acrylate, and phenoxyethyl acrylate were used as hydrophobic units. Color dispersions were prepared by using organic dye and these amphiphilic polymers. The color dispersions containing random copolymers exhibited low viscosity, which is preferable for jetting, but the dye particles tended to sediment after the thermal aging test. In contrast, those containing block copolymers showed high viscosity, which was unsuitable for jetting. However, they retained their initial dispersion state after the aging test. The advantages and disadvantages of each monomer arrangement (random or block) were demonstrated, providing a future outlook on the molecular design of polymer dispersants for color dispersions.

Light-Triggered Polymersome-Based Anticancer Therapeutics Delivery

Polymersomes are biomimetic cell membrane-like model structures that are self-assembled stepwise from amphiphilic copolymers. These polymeric (nano)carriers have gained the scientific community’s attention due to their biocompatibility, versatility, and higher stability than liposomes. Their tunable properties, such as composition, size, shape, and surface functional groups, extend encapsulation possibilities to either hydrophilic or hydrophobic cargoes (or both) and their site-specific delivery. Besides, polymersomes can disassemble in response to different stimuli, including light, for controlling the “on-demand” release of cargo that may also respond to light as photosensitizers and plasmonic nanostructures. Thus, polymersomes can be spatiotemporally stimulated by light of a wide wavelength range, whose exogenous response may activate light-stimulable moieties, enhance the drug efficacy, decrease side effects, and, thus, be broadly employed in photoinduced therapy. This review describes current light-responsive polymersomes evaluated for anticancer therapy. It includes light-activable moieties’ features and polymersomes’ composition and release behavior, focusing on recent advances and applications in cancer therapy, current trends, and photosensitive polymersomes’ perspectives.

Controlled copolymerization of α-NCAs and α-NNTAs for preparing peptide/peptoid hybrid polymers with adjustable proteolysis

The living and controlled copolymerization of α-NCAs and α-NNTAs enables the facile synthesis of peptide/peptoid hybrid polymers with an alternating-like distribution of residues and adjustable proteolysis by varying the proportion of peptoid residues.

Polypeptoids and Peptoid-Peptide Hybrids by Transition Metal Catalysis

Peptoids have attracted attention for application in biomedicine due to their advantageous properties as compared to peptides. The structural analogues are typically resistant to protease degradation and offer improved biocompatibility. Chemical routes to an impressive variety of short-chain, low-molecular-weight peptoids are well-established. However, synthetic methods for well-defined, high-molecular-weight polypeptoids with side chain diversity are still in their infancy. Here, we report a facile method for synthesis of polypeptoids via transition-metal-catalyzed controlled, living polymerization of N-substituted N-carboxyanhydrides. Our method is amenable to hydrophilic and hydrophobic side chains and yields high-molecular-weight linear polypeptoids of predictable length and low dispersity. Further, the polymer end groups can be tuned for biological targeting, and polypeptide-polypeptoid hybrids are readily prepared in one pot. Our materials are indeed resistant to common proteases and are well-tolerated by human cells. Overall, this work represents a significant stride toward access to tunable polypeptoids.

Self-Assembled Nanoparticles Based on Block-Copolymers of Poly(2-Deoxy-2-methacrylamido-d-glucose)/Poly(N-Vinyl Succinamic Acid) with Poly(O-Cholesteryl Methacrylate) for Delivery of Hydrophobic Drugs

The self-assembly of amphiphilic block-copolymers is a convenient way to obtain soft nanomaterials of different morphology and scale. In turn, the use of a biomimetic approach makes it possible to synthesize polymers with fragments similar to natural macromolecules but more resistant to biodegradation. In this study, we synthesized the novel bio-inspired amphiphilic block-copolymers consisting of poly(N-methacrylamido-d-glucose) or poly(N-vinyl succinamic acid) as a hydrophilic fragment and poly(O-cholesteryl methacrylate) as a hydrophobic fragment. Block-copolymers were synthesized by radical addition-fragmentation chain-transfer (RAFT) polymerization using dithiobenzoate or trithiocarbonate chain-transfer agent depending on the first monomer, further forming the hydrophilic block. Both homopolymers and copolymers were characterized by ¹H NMR and Fourier transform infrared spectroscopy, as well as thermogravimetric analysis. The obtained copolymers had low dispersity (1.05-1.37) and molecular weights in the range of ~13,000-32,000. The amphiphilic copolymers demonstrated enhanced thermal stability in comparison with hydrophilic precursors. According to dynamic light scattering and nanoparticle tracking analysis, the obtained amphiphilic copolymers were able to self-assemble in aqueous media into nanoparticles with a hydrodynamic diameter of approximately 200 nm. An investigation of nanoparticles by transmission electron microscopy revealed their spherical shape. The obtained nanoparticles did not demonstrate cytotoxicity against human embryonic kidney (HEK293) and bronchial epithelial (BEAS-2B) cells, and they were characterized by a low uptake by macrophages in vitro. Paclitaxel loaded into the developed polymer nanoparticles retained biological activity against lung adenocarcinoma epithelial cells (A549).

Solution Self-Assembly of Coil-Crystalline Diblock Copolypeptoids Bearing Alkyl Side Chains

Polypeptoids, a class of synthetic peptidomimetic polymers, have attracted increasing attention due to their potential for biotechnological applications, such as drug/gene delivery, sensing and molecular recognition. Recent investigations on the solution self-assembly of amphiphilic block copolypeptoids highlighted their capability to form a variety of nanostructures with tailorable morphologies and functionalities. Here, we review our recent findings on the solutions self-assembly of coil-crystalline diblock copolypeptoids bearing alkyl side chains. We highlight the solution self-assembly pathways of these polypeptoid block copolymers and show how molecular packing and crystallization of these building blocks affect the self-assembly behavior, resulting in one-dimensional (1D), two-dimensional (2D) and multidimensional hierarchical polymeric nanostructures in solution.

Review of Contemporary Self-Assembled Systems for the Controlled Delivery of Therapeutics in Medicine

The novel and unique design of self-assembled micro and nanostructures can be tailored and controlled through the deep understanding of the self-assembly behavior of amphiphilic molecules. The most commonly known amphiphilic molecules are surfactants, phospholipids, and block copolymers. These molecules present a dual attraction in aqueous solutions that lead to the formation of structures like micelles, hydrogels, and liposomes. These structures can respond to external stimuli and can be further modified making them ideal for specific, targeted medical needs and localized drug delivery treatments. Biodegradability, biocompatibility, drug protection, drug bioavailability, and improved patient compliance are among the most important benefits of these self-assembled structures for drug delivery purposes. Furthermore, there are numerous FDA-approved biomaterials with self-assembling properties that can help shorten the approval pathway of efficient platforms, allowing them to reach the therapeutic market faster. This review focuses on providing a thorough description of the current use of self-assembled micelles, hydrogels, and vesicles (polymersomes/liposomes) for the extended and controlled release of therapeutics, with relevant medical applications. FDA-approved polymers, as well as clinically and commercially available nanoplatforms, are described throughout the paper.

Giant Polymer Compartments for Confined Reactions

In nature, various specific reactions only occur in spatially controlled environments. Cell compartment and subcompartments act as the support required to preserve the bio-specificity and functionality of the biological content, by affording absolute segregation. Inspired by this natural perfect behavior, bottom-up approaches are on focus to develop artificial cell-like structures, crucial for understanding relevant bioprocesses and interactions or to produce tailored solutions in the field of therapeutics and diagnostics. In this review, we discuss the benefits of constructing polymer-based single and multicompartments (capsules and giant unilamellar vesicles (GUVs)), equipped with biomolecules as to mimic cells. In this respect, we outline key examples of how such structures have been designed from scratch, namely, starting from the application-oriented selection and synthesis of the amphiphilic block copolymer. We then present the state-of-the-art techniques for assembling the supramolecular structure while permitting the encapsulation of active compounds and the incorporation of peptides/membrane proteins, essential to support in situ reactions, e.g., to replicate intracellular signaling cascades. Finally, we briefly discuss important features that these compartments offer and how they could be applied to engineer the next generation of microreactors, therapeutic solutions, and cell models.

Self-Assembly of Minimal Peptoid Sequences

Peptoids are biofunctional N-substituted glycine peptidomimics. Their self-assembly is of fundamental interest because they demonstrate alternatives to conventional peptide structures based on backbone chirality and beta-sheet hydrogen bonding. The search for self-assembling, water-soluble "minimal" sequences, be they peptide or peptidomimic, is a further challenge. Such sequences are highly desired for their compatibility with biomacromolecules and convenient synthesis for broader application. We report the self-assembly of a set of trimeric, water-soluble α-peptoids that exhibit a relatively low critical aggregation concentration (CAC ∼ 0.3 wt %). Cryo-EM and angle-resolved DLS show different sequence-dependent morphologies, namely uniform ca. 6 nm wide nanofibers, sheets, and clusters of globular assemblies. Absorbance and fluorescence spectroscopies indicate unique phenyl environments for π-interactions in the highly ordered nanofibers. Assembly of our peptoids takes place when the sequences are fully ionized, representing a departure from superficially similar amyloid-type hydrogen-bonded peptide nanostructures and expanding the horizons of assembly for sequence-specific bio- and biomimetic macromolecules.

Macromolecular design and preparation of polymersomes

From drug delivery to nanoreactors and protocells, polymersomes have gained considerable interest from researchers due to their novel applications.

Self-assembly of paramagnetic amphiphilic copolymers for synergistic therapy

Theranostic nanoparticles composed of amphiphilic paramagnetic polymers are assembled for dual mode imaging and synergistic therapy.

Diblock copolypeptoids: a review of phase separation, crystallization, self-assembly and biological applications

Diblock copolypeptoids have the capacity to phase separate, crystallize, and self-assemble into a variety of nanostructures, which have shown great potential in a variety of biological applications.

Synthesis and complex self-assembly of amphiphilic block copolymers with a branched hydrophobic poly(2-oxazoline) into multicompartment micelles, pseudo-vesicles and yolk/shell nanoparticles

A new PEO-b-PEHOx amphiphilic diblock copolymer was achieved which unlocked new complex self-assembled structures. Thanks to its hydrophobic oxazoline block with a long branched side chain, EHOx, various potent structures were obtained.

Isoprenoids enhance the stability of fatty acid membranes at the emergence of life potentially leading to an early lipid divide

Two key problems concern cell membranes during the emergence and early evolution of life: what was their initial composition, and why did the membranes of archaea and bacteria diverge? The composition of the first cell membranes could shed light on the most likely environment for the emergence of life. The opposing stereochemistry of modern lipid glycerol-phosphate headgroups in bacteria and archaea suggests that early membranes were composed of single chain amphiphiles, perhaps both fatty acids and isoprenoids. We investigated the effect of adding isoprenoids to fatty acid membranes using a combination of UV-visible spectroscopy, confocal microscopy and transmission electron microscopy. We tested the stability of these membranes across a pH range and under different concentrations of ionic species relevant to oceanic hydrothermal environments, including Na2+, Cl-, Mg2+, Ca2+, HC O 3 - , Fe3+, Fe2+ and S2-. We also tested the assembly of vesicles in the presence of Fe particles and FeS precipitates. We found that isoprenoids enhance the stability of membranes in the presence of salts but require 30-fold higher concentrations for membrane formation. Intriguingly, isoprenoids strongly inhibit the tendency of vesicles to aggregate together in the presence of either Fe particles or FeS precipitates. These striking physical differences in the stability and aggregation of protocells may have shaped the divergence of bacteria and archaea in early hydrothermal environments.

Macrophage Targeting pH Responsive Polymersomes for Glucocorticoid Therapy

Glucocorticoid (GC) drugs are the cornerstone therapy used in the treatment of inflammatory diseases. Here, we report pH responsive poly(2-methacryloyloxyethyl phosphorylcholine)–poly(2-(diisopropylamino)ethyl methacrylate) (PMPC–PDPA) polymersomes as a suitable nanoscopic carrier to precisely and controllably deliver GCs within inflamed target cells. The in vitro cellular studies revealed that polymersomes ensure the stability, selectivity and bioavailability of the loaded drug within macrophages. At molecular level, we tested key inflammation-related markers, such as the nuclear factor-κB, tumour necrosis factor-α, interleukin-1β, and interleukin-6. With this, we demonstrated that pH responsive polymersomes are able to enhance the anti-inflammatory effect of loaded GC drug. Overall, we prove the potential of PMPC–PDPA polymersomes to efficiently promote the inflammation shutdown, while reducing the well-known therapeutic limitations in GC-based therapy.

Directed Insertion of Light-Activated Proteorhodopsin into Asymmetric Polymersomes from an ABC Block Copolymer

Nanoscopic artificial vesicles containing functional protein transporters are fundamental for synthetic biology. Energy-providing modules, such as proton pumps, are a basis for simple nanoreactors. We report on the first insertion of a functional transmembrane protein into asymmetric polymersomes from an ABC triblock copolymer. The polymer with the composition poly(ethylene glycol)-poly(diisopropylaminoethyl methacrylate)-poly(styrenesulfonate) (PEG-PDPA-PSS) was synthesized by sequential controlled radical polymerization. PEG and PSS are two distinctively different hydrophilic blocks, allowing for a specific orientation of our protein, the light-activated proton pump proteorhodopsin (PR), into the final proteopolymersome. A very interesting aspect of the PEG-PDPA-PSS triblock copolymers is that it allowed for simultaneous vesicle formation and oriented insertion of PR simply by adjusting the pH. The intrinsic positive charge of PR's intracellular surface was enhanced by a His-tag, which aligns readily with the negative charges of the PSS on the outside of the polymersomes. The directed insertion of PR was confirmed by a light-dependent pH change of the proteopolymersome solution, indicating the intended orientation. We have hereby demonstrated the first successful oriented insertion of a proton pump into an artificial asymmetric membrane.

Novel monomers in radical ring-opening polymerisation for biodegradable and pH responsive nanoparticles

We report the first amine-bearing cyclic ketene acetals (CKAs) for radical ring-opening polymerisation (RROP). The resulting polyesters and their corresponding nanoparticles were biodegradable and showed the desired pH sensitive behaviour.

Polymersomes with aggregation-induced emission based on amphiphilic block copolypeptoids

Fluorescent and biocompatible polymersomes based on the amphiphilic block copolypeptoid P(TPE-NAG)-b-PSar are promising for bio-imaging and drug delivery applications.

Polymersomes: Breaking the Glass Ceiling?

Polymer vesicles, also known as polymersomes, have garnered a lot of interest even before the first report of their fabrication in the mid-1990s. These capsules have found applications in areas such as drug delivery, diagnostics and cellular models, and are made via the self-assembly of amphiphilic block copolymers, predominantly with soft, rubbery hydrophobic segments. Comparatively, and despite their remarkable impermeability, glassy polymersomes (GPs) have been less pervasive due to their rigidity, lack of biodegradability and more restricted fabrication strategies. GPs are now becoming more prominent, thanks to their ability to undergo stable shape-change (e.g., into non-spherical morphologies) as a response to a predetermined trigger (e.g., light, solvent). The basics of block copolymer self-assembly with an emphasis on polymersomes and GPs in particular are reviewed here. The principles and advantages of shape transformation of GPs as well as their general usefulness are also discussed, together with some of the challenges and opportunities currently facing this area.

Brønsted base mediated one-pot synthesis of catechol-ended amphiphilic polysarcosine-b-poly(N-butyl glycine) diblock copolypeptoids

Catechol moiety offers a versatile platform in the preparation of functionalized polymers, but it is not usually compatible with catalysis in polymerizations. To address these challenges, we suggest employment of one Brønsted base in masking the activity of catechol moiety and to modulate the polymerization. Based on this strategy, the ring-opening polymerization (ROP) of sarcosine N-carboxyanhydrides (Sar-NCA) was carried out using dopamine hydrochloride as an initiator and triethylamine as a Brønsted base. PSar with predicted molecular weights (M n,NMR=3.7 kg mol−1) and narrow dispersities (Đ<1.13) was prepared. Catechol initiator was successfully linked to PSar end as confirmed by MALDI-ToF MS. Subsequently, copolymerization of N-butyl glycine N-carboxyanhydrides (Bu-Gly-NCA) from the PSar in one-pot produced catechol end-functionalized amphiphilic polysarcosine-block-poly(N-butyl glycine) diblock copolypeptoids (cat-PSar-b-PGlyBu). Further, cat-PSar-b-PGlyBu enabled the aqueous dispersion of manganese oxide nanoparticles which was attributable to the anchor of the diblock copolymers onto the surface of the nanoparticles. The strategy for catechol masking and polymerization mediating by one Brønsted base offered a new avenue into the synthesis of catechol-ended block copolymers.

Investigation of drug release modulation from poly(2-oxazoline) micelles through ultrasound

Among external stimuli used to trigger release of a drug from a polymeric carrier, ultrasound has gained increasing attention due to its non-invasive nature, safety and low cost. Despite this attention, there is only limited knowledge about how materials available for the preparation of drug carriers respond to ultrasound. This study investigates the effect of ultrasound on the release of a hydrophobic drug, dexamethasone, from poly(2-oxazoline)-based micelles. Spontaneous and ultrasound-mediated release of dexamethasone from five types of micelles made of poly(2-oxazoline) block copolymers, composed of hydrophilic poly(2-methyl-2-oxazoline) and hydrophobic poly(2-n-propyl-2-oxazoline) or poly(2-butyl-2-oxazoline-co-2-(3-butenyl)-2-oxazoline), was studied. The release profiles were fitted by zero-order and Ritger-Peppas models. The ultrasound increased the amount of released dexamethasone by 6% to 105% depending on the type of copolymer, the amount of loaded dexamethasone, and the stimulation time point. This study investigates for the first time the interaction between different poly(2-oxazoline)-based micelle formulations and ultrasound waves, quantifying the efficacy of such stimulation in modulating dexamethasone release from these nanocarriers.

Challenges for the Self-Assembly of Poly(Ethylene Glycol)⁻Poly(Lactic Acid) (PEG-PLA) into Polymersomes: Beyond the Theoretical Paradigms

Polymersomes (PL), vesicles formed by self-assembly of amphiphilic block copolymers, have been described as promising nanosystems for drug delivery, especially of biomolecules. The film hydration method (FH) is widely used for PL preparation, however, it often requires long hydration times and commonly results in broad size distribution. In this work, we describe the challenges of the self-assembly of poly (ethylene glycol)-poly(lactic acid) (PEG-PLA) into PL by FH exploring different hydrophilic volume fraction (f) values of this copolymer, stirring times, temperatures and post-FH steps in an attempt to reduce broad size distribution of the nanostructures. We demonstrate that, alongside f value, the methods employed for hydration and post-film steps influence the PEG-PLA self-assembly into PL. With initial FH, we found high PDI values (>0.4). However, post-hydration centrifugation significantly reduced PDI to 0.280. Moreover, extrusion at higher concentrations resulted in further improvement of the monodispersity of the samples and narrow size distribution. For PL prepared at concentration of 0.1% (m/v), extrusion resulted in the narrower size distributions corresponding to PDI values of 0.345, 0.144 and 0.081 for PEG₄₅-PLA₆₉, PEG₁₁₄-PLA₁₅₃ and PEG₁₁₄-PLA₁₈₀, respectively. Additionally, we demonstrated that copolymers with smaller f resulted in larger PL and, therefore, higher encapsulation efficiency (EE%) for proteins, since larger vesicles enclose larger aqueous volumes.

Biocompatibility, biodegradation and excretion of polylactic acid (PLA) in medical implants and theranostic systems

Polylactic acid (PLA) is the most commonly used biodegradable polymer in clinical applications today. Examples range from drug delivery systems, tissue engineering, temporary and long-term implantable devices; constantly expanding to new fields. This is owed greatly to the polymer's favorable biocompatibility and to its safe degradation products. Once coming in contact with biological media, the polymer begins breaking down, usually by hydrolysis, into lactic acid (LA) or to carbon dioxide and water. These products are metabolized intracellularly or excreted in the urine and breath. Bacterial infection and foreign-body inflammation enhance the breakdown of PLA, through the secretion of enzymes that degrade the polymeric matrix. The biodegradation occurs both on the surface of the polymeric device and inside the polymer body, by diffusion of water between the polymer chains. The median half-life of the polymer is 30 weeks; however, this can be lengthened or shortened to address the clinical needs. Degradation kinetics can be tuned by determining the molecular composition and the physical architecture of the device. Using L- or D- chirality of the LA will greatly slow or lengthen the degradation rates, respectively. Despite the fact that this polymer is more than 150 years old, PLA remains a fertile platform for biomedical innovation and fundamental understanding of how artificial polymers can safely coexist with biological systems.

Self-assembly of bioactive peptides, peptide conjugates, and peptide mimetic materials

Molecular self-assembly is a multi-disciplinary field of research, with potential chemical and biological applications. One of the main driving forces of self-assembly is molecular amphiphilicity, which can drive formation of complex and stable nanostructures. Self-assembling peptide and peptide conjugates have attracted great attention due to their biocompatibility, biodegradability and biofunctionality. Understanding assembly enables the better design of peptide amphiphiles which may form useful and functional nanostructures. This review covers self-assembly of amphiphilic peptides and peptide mimetic materials, as well as their potential applications.

Self-Assembly of Janus Nanoparticles into Transformable Suprastructures

One of the greatest challenges in colloidal self-assembly is to obtain multiple distinct but transformable suprastructures from the same particles in monophasic solvent. Here, we combined deformable and rigid lobes in snowman-shaped amphiphilic Janus nanoparticles (JNPs). These JNPs exhibited excellent ability to self-assemble into micelles, worms, mini-capsules, giant- and elongated-vesicles. This rich suprastructural diversity was obtained by kinetic manipulation of the self-assembly conditions. The suprastructures consist of four to thousands of highly oriented JNPs with dimensions ranging from 500-nanometer to 30-μm. Moreover, the suprastructures can be transformed into one another or dissembled into individual particles. These features make colloidal assembly highly comparable to that of amphiphilic molecules, however, key differences were discovered.

Solution Self-Assemblies of Sequence-Defined Ionic Peptoid Block Copolymers

A series of amphiphilic ionic peptoid block copolymers where the total number (1 or 3) and position of ionic monomers along the polymer chain are precisely controlled have been synthesized by the submonomer method. Upon dissolution in water at pH = 9, the amphiphilic peptoids self-assemble into small spherical micelles having hydrodynamic radius in ∼5-10 nm range and critical micellar concentration (CMC) in the 0.034-0.094 mg/mL range. Small-angle neutron scattering (SANS) analysis of the micellar solutions revealed unprecedented dependence of the micellar structure on the number and position of ionic monomers along the chain. It was found that the micellar aggregation number ( N_agg) and the micellar radius ( R_m) both increase as the ionic monomer is positioned progressively away from the junction of the hydrophilic and hydrophobic segments along the polymer chain. By defining an ionic monomer position number ( n) as the number of monomers between the junction and the ionic monomer, N_agg exhibited a power law dependence on n with an exponent of ∼1/3 and ∼3/10 for the respective singly and triply charged series. By contrast, R_m exhibited a weaker dependence on the ionic monomer position by a power law relationship with an exponent of ∼1/10 and ∼1/20 for the respective singly and triply charged series. Furthermore, R_m was found to scale with N_agg in a power-law relationship with an exponent of 0.32 for the singly charged series, consistent with a weakly charged ionic star-like polymer model in the unscreened regime. This study demonstrated a unique method to precisely tailor the structure of small spherical micelles based on ionic block copolymers by controlling the sequence and position of the ionic monomer.

Towards a coarse-grained model of the peptoid backbone: the case of N,N-dimethylacetamide

Coarse-grained model of DMA, containing the basic motif of the peptoid backbone, based on short ranged many-body ranged interactions.

PeptoSomes for Vaccination: Combining Antigen and Adjuvant in Polypept(o)ide-Based Polymersomes

In this work, the first vaccine is reported based on a PeptoSome, which contains a model antigen (SIINFEKL) and adjuvant (CpG). PeptoSomes are polypept(o)ide-based polymersomes built of a block-copolymer with polysarcosine (PSar) as the hydrophilic block (X _n = 111) and poly(benzyl-glutamic acid) (PGlu(OBn)) as the hydrophobic one (X _n = 46). The polypept(o)ide is obtained with low dispersity index of 1.32 by controlled ring-opening polymerization. Vesicle formation by dual centrifugation technique allows for loading of vesicles up to 40 mol%. PeptoSomes are characterized by multiangle dynamic light scattering, static light scattering, and cryogenic transmission electron microscopy (cryoTEM). The PeptoSomes have a hydrodynamic radius of 39.2 nm with a low dispersity (µ ₂ = 0.1). The ρ-ratio R _g /R _h of 0.95 already indicates that vesicles are formed, which can be confirmed by cryoTEM. Loaded PeptoSomes deliver the antigen (SIINFEKL) and an adjuvant (CpG) simultaneously into dendritic cells (DCs). Upon cellular uptake, dendritic cells are stimulated and activated, which leads to expression of cluster of differentiation CD80, CD86, and MHCII, but induces excretion of proinflammatory cytokines (e.g., TNFα). Furthermore, DC-mediated antigen-specific T-cell proliferation is achieved, thus underlining the enormous potential of PeptoSomes as a versatile platform for vaccination.

Self-Assembled Amphiphilic Block Copolymers/CdTe Nanocrystals for Efficient Aqueous-Processed Hybrid Solar Cells

Due to their low cost and high efficiency, polymer/nanocrystal hybrid solar cells (HSCs) have attracted much attention in recent years. In this work, water-soluble hybrid materials consisting of amphiphilic block copolymers (ABCPs) and cadmium telluride nanocrystals (CdTe NCs) were used as the active layer to fabricate the HSCs via aqueous processing. The ABCPs composed of poly(3-hexylthiophene) (P3HT) and poly(acrylic acid) (PAA) self-assembled into ordered nanostructured micelles which then transformed to nanowires by comicellization with P3HT additives. Furthermore, after annealing, the hybrid materials formed an interpenetrating network which resulted in a maximum power conversion efficiency of 4.8% in the HSCs. The properties of the hybrid materials and the film morphology were studied and correlated to the device performance. The results illustrate how the inclusion of ABCPs for directed assembly and homo-P3HT for charge transport and light absorption improves device performance. The aqueous-processed HSCs based on the ABCPs and NCs offer an effective method for the fabrication of efficient solar cells.

Polysarcosine-Based Lipids: From Lipopolypeptoid Micelles to Stealth-Like Lipids in Langmuir Blodgett Monolayers

Amphiphiles and, in particular, PEGylated lipids or alkyl ethers represent an important class of non-ionic surfactants and have become key ingredients for long-circulating (“stealth”) liposomes. While poly-(ethylene glycol) (PEG) can be considered the gold standard for stealth-like materials, it is known to be neither a bio-based nor biodegradable material. In contrast to PEG, polysarcosine (PSar) is based on the endogenous amino acid sarcosine (N-methylated glycine), but has also demonstrated stealth-like properties in vitro, as well as in vivo. In this respect, we report on the synthesis and characterization of polysarcosine based lipids with C₁₄ and C₁₈ hydrocarbon chains and their end group functionalization. Size exclusion chromatography (SEC) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis reveals that lipopeptoids with a degree of polymerization between 10 and 100, dispersity indices around 1.1, and the absence of detectable side products are directly accessible by nucleophilic ring opening polymerization (ROP). The values for the critical micelle concentration for these lipopolymers are between 27 and 1181 mg/L for the ones with C₁₈ hydrocarbon chain or even higher for the C₁₄ counterparts. The lipopolypeptoid based micelles have hydrodynamic diameters between 10 and 25 nm, in which the size scales with the length of the PSar block. In addition, C₁₈PSar₅₀ can be incorporated in 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) monolayers up to a polymer content of 3%. Cyclic compression and expansion of the monolayer showed no significant loss of polymer, indicating a stable monolayer. Therefore, lipopolypeptoids can not only be synthesized under living conditions, but my also provide a platform to substitute PEG-based lipopolymers as excipients and/or in lipid formulations.