A Light-Responsive Self-Assembly Formed by a Cationic Azobenzene Derivative and SDS as a Drug Delivery System

Photo-induced drug release at interfaces with arylazopyrazoles

Smart responsive materials have spurred the progress in high-precision drug delivery. Enormous attention has been given to characterizing drug release in bulk aqueous solutions, however, aqueous-hydrophobic interfaces are vital components of biological systems which serve as the point of entry into cells. These interfaces are involved in many key biomolecular interactions, and while the potential for drug molecules to adsorb to these interfaces is recognized, their specific role in the context of drug release remains largely unexplored. We present a fundamental investigation on the release of encapsulated drugs at the air-water interface as a representative model to mimic the organic/aqueous interface of cells. Combining the advantages of light as an external stimulus and the superiority of arylazopyrazoles (AAP) over conventional azobenzene photoswitches, we report a micellar nanocarrier for the capture and release of the chemotherapeutic drug doxorubicin. Using a powerful combination of interface-sensitive techniques such as the Langmuir-Blodgett technique, surface tensiometry, and the interface-specific vibrational sum-frequency generation spectroscopy, we demonstrate the photoresponsive release of doxorubicin encapsulated in the micelles of AAP photosurfactants to the air-water interface. Complementary fluorescence measurements corroborate additional drug release in bulk aqueous solutions.

Tailoring Drug Release Kinetics by the Design and Optimization of Substituents in Azobenzene Molecules in the Photosensitive Liposomal System

A light-sensitive moiety, e.g., azobenzene, for the light-sensitive liposomal drug carrier has shown advantages as an advanced drug delivery system in site-specific smart therapy due to its reversible photoisomerization characteristics. In this work, a series of 4-position-cholesterol-functionalized azobenzene derivatives with 4'-position substituted pyridine, quinoline, isoquinoline, triethylamine, or ethylenediamine were synthesized, and the relationship between the molecular structure and drug release behaviors was clarified. We found that the charge and electrophilicity of substituents were two important factors (expressed as the characteristic time) that can precisely regulate the isomerization ratio in the liposomal system. There was an approximately linear correlation between the characteristic time of photoisomerization and the fitted first-order constant of photoinduced drug release rate. The photoinduced drug release could be achieved at the desired time and in an appropriate amount by tailoring the substituents at the 4'-position of azobenzene-cholesterol derivatives.

Light and pH responsive catanionic vesicles based on a chalcone/flavylium photoswitch for smart drug delivery: From molecular design to the controlled release of doxorubicin

Spatially and temporally localized delivery is a promising strategy to circumvent adverse effects of traditional drug therapy such as drug toxicity and prolonged treatments. Stimuli-responsive colloidal nanocarriers can be crucial to attain such goals. Here, we develop a delivery system based on dual light and pH responsive vesicles having a cationic bis-quat gemini surfactant, 12-2-12, and a negatively charged amphiphilic chalcone, C4SCh. The premise is to exploit the chalcone/flavylium interconversion to elicit a morphological change of the vesicles leading to the controlled release of an encapsulated drug. First, the phase behavior of the catanionic system is studied and the desirable composition yielding stable unilamellar vesicles identified and selected for further studies. The solutions containing vesicles (Dh ≈ 200 nm, ζ-potential ≈ 80 mV) are in-depth characterized by light microscopy, cryo-transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS) and surface tension measurements. Upon subjecting the vesicles to UV irradiation (λ = 365 nm) at near neutral pH (≈ 6.0), no morphological effects are observed, yet when irradiation is coupled with pH = 3.0, the majority of the vesicles are disrupted into bilayer fragments. The anticancer drug doxorubicin (DOX) is successfully entrapped in the non-irradiated vesicles, yielding an encapsulation efficiency of ≈ 25% and a loading capacity of ≈ 3%. The release profile of the drug-loaded vesicles is then studied in vitro in four conditions: i) no stimuli (pH = 6.0); ii) irradiation, pH = 6.0; iii) no irradiation and adjusted pH = 3.0; iv) irradiation and adjusted pH = 3.0 Crucially, irradiation at pH = 3.0 leads to a sustained release of DOX to ca. 80% (within 4 h), whereas cases i) and ii) lead to only ≈ 25 % release and case iii) to 50% release but precipitation of the vesicles. Thus, our initial hypothesis is confirmed: we present a proof of concept delivery system where light and pH act as inputs of an AND logic gate mechanism for the controlled release of a relevant biomedical drug (output). This may prove useful if the irradiated nanocarriers meet acidified physiological environments such as tumors sites, endosomes or lysosomes.

Biocompatible metallosurfactant-based nanocolloid-loaded Rose Bengal with excellent singlet oxygen-induced phototoxicity efficiency against cancer cells

Photodynamic therapy (PDT) is facing challenges such as poor solubility, precise delivery, self-aggregation, and photobleaching of photosensitizers with cancer cells due to their less tendency to accumulate in tumor tissues. To address these challenges, we have explored a Rose Bengal (RB)-loaded metallocatanionic vesicles (MCVs) nanosystem for the phototoxicity of cancer cells. Different sets of MCVs were prepared by two different cationic single-chain metallosurfactants, i.e., hexadecylpyridinium trichlorocuprate (CuCPC I) and hexadecylpyridinium trichloroferrate (FeCPC I) in combination with anionic double-chain sodium bis(2-ethylhexyl)sulfosuccinate (AOT) surfactant in phosphate buffer saline of pH 7.4. The RB-loaded CuCPC I:AOT and FeCPC I:AOT vesicles enhanced the maximum singlet oxygen (¹O₂) generation by 1-fold and 3-fold, respectively, compared to pure RB. Upon irradiation with a 532 nm laser for 10 min, these RB-loaded CuCPC I:AOT and FeCPC I:AOT MCVs significantly decreased the metabolic activity of U-251 cells by 70% and 85% at MCVs concentration of 0.75 μM, respectively. Furthermore, RB-loaded MCVs showed the highest intracellular ¹O₂-mediated membrane damage and cell-killing effect as confirmed by singlet oxygen sensor green and differential nuclear staining assay, which is attributed to the cellular uptake profile of different RB-loaded MCVs fractions. Caspase 3/7 assay confirmed the apoptotic pathway of cell death by activating caspase. Therefore, the photoactivation of RB-loaded MCVs led to a significant reduction in the viability of U-251 cells (maximum 85%), which resulted in cell death. Our study demonstrated the advantage of using these dual-charge and biocompatible metallocatanionic vesicles as a promising delivery system of photodynamic therapy that can enhance ¹O₂ generation from PS and can be further utilized in photomedicine.

Light-Switchable Membrane Permeability in Giant Unilamellar Vesicles

In this work, giant unilamellar vesicles (GUVs) were synthesized by blending the natural phospholipid 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) with a photoswitchable amphiphile (1) that undergoes photoisomerization upon irradiation with UV-A (E to Z) and blue (Z to E) light. The mixed vesicles showed marked changes in behavior in response to UV light, including changes in morphology and the opening of pores. The fine control of membrane permeability with consequent cargo release could be attained by modulating either the UV irradiation intensity or the membrane composition. As a proof of concept, the photocontrolled release of sucrose from mixed GUVs is demonstrated using microscopy (phase contrast) and confocal studies. The permeability of the GUVs to sucrose could be increased to ~4 × 10-2 μm/s when the system was illuminated by UV light. With respect to previously reported systems (entirely composed of synthetic amphiphiles), our findings demonstrate the potential of photosensitive GUVs that are mainly composed of natural lipids to be used in medical and biomedical applications, such as targeted drug delivery and localized topical treatments.

Accelerating supramolecular aggregation by molecular sliding

Diffusion-based translocation along DNA or RNA molecules is essential for genome regulatory proteins to execute their biological functions. The reduced dimensionality of the searching process makes the proteins bind specific target sites at a "faster-than-diffusion-controlled rate". We herein report a photoresponsive slider-track diffusion system capable of self-assembly rate acceleration, which consists of (-)-camphorsulfonic acid, 4-(4'-n-octoxylphenylazo)benzenesulfonic acid, and isotactic poly(2-vinylpyridine). The protonated pyridine rings act as the footholds for anionic azo sliders to diffusively bind and slide along polycationic tracks via electrostatic interactions. Ultraviolet light triggers the trans to cis isomerization and aggregation of azo sliders, which can be monitored by multiple spectroscopic methods without labeling. The presence of vinyl polymer track increases the aggregation rate of cis azobenzene up to ∼20 times, depending on the stereoregularity of the polymer chain, the acid/base ratio and the addition of salt. This system has a feature of simplicity, monitorability, controllability, and could find applications in designing molecular machines with desired functionalities.

Light-responsive biomaterials for ocular drug delivery

Light-responsive biomaterials can be used for the delivery of therapeutic drugs and nucleic acids, where the tunable/precise delivery of payload highlights the potential of such biomaterials for treating a variety of conditions. The translucency of eyes and advances of laser technology in ophthalmology make light-responsive delivery of drugs feasible. Importantly, light can be applied in a non-invasive fashion; therefore, light-triggered drug delivery systems have great potential for clinical impact. This review will examine various types of light-responsive polymers and the chemistry that underpins their application as ophthalmic drug delivery systems.

Gemini Surfactant Mediated Catansomes for Enhanced Singlet Oxygen Generation of Rose Bengal and Their Phototoxicity against Cancer Cells

Photodynamic therapy (PDT) is an innovative technique for cancer treatment with minimal side effects, based on the use of a photosensitizer, oxygen, and light. Photosensitizers (PSs) have several limitations, that may limit their clinical use, like poor solubilization, self-aggregation, and lack of specific targeting, which can be addressed with the use of nanomaterials. Herein, a unique type of catansomes (CaSs) was prepared using a gemini imidazolium-based surfactant (1,3-bis[(3-octadecyl-1-imidazolio)methyl]benzene dibromide (GBIB) and a double chain surfactant, diaoctyl sodium sulfosuccinate or Aerosol OT (AOT). The formation of CaS GBIB/AOT was optimized in various ethanol/water (E/W) solvent ratios by employing a facile, quick, and most reliable solution-solution mixing method. The CaS was characterized by dynamic light scattering (DLS) and field emission gun scanning electron microscopy (FEG-SEM) techniques. The experimental results reveal that stable CaSs with a spherical shape were obtained at lower concentration (100 μM). Rose Bengal (RB), a PS of the xanthene family, was incorporated into these prepared CaSs, as proven by fluorescence spectroscopy, UV-visible absorption spectroscopy, and confocal laser scanning microscopy. Singlet oxygen (¹O₂) generation studies revealed the relevant role of the E/W solvent ratio as there was a 4-fold boost in the ¹O₂ production for GBIB/AOT in E/W = 50:50 and around 3-fold in E/W = 30:70. Also, the GBIB-rich 80:20 fraction was more efficient in increasing the ¹O₂ generation as compared to the AOT rich fraction (20:80). Further, their phototoxicity was tested in a water-rich solvent ratio (E/W = 30:70) against MCF-7 cells. Upon irradiation with a 532 nm laser (50 mW) for 5 min, RB@GBIB/AOT(20:80) fraction caused 50% decrease in the metabolic activity of MCF-7 cells, and RB@GBIB/AOT(80:20) fraction produced a maximum 85% decrease in cell viability. Furthermore, the enhancement in intracellular ¹O₂ generation by RB@GBIB/AOT, as compared to pure RB, was confirmed with singlet oxygen sensor green (SOSG). This new type of CaS based on gemini surfactants exhibiting a large amount of ¹O₂ generation, holds great interest for several applications, such as use in photomedicine in future.

Metallocatanionic vesicles mediated enhanced singlet oxygen generation and photodynamic therapy of cancer cells

In clinics, photodynamic therapy (PDT) is established as a non-invasive therapeutic modality for certain types of cancers and skin diseases. However, due to poor water solubility, photobleaching, and dark toxicity...

Dual Thermo- and Photo-Responsive Micelles Based on Azobenzene-Containing Random Copolymer

Amphiphilic random copolymer poly(methacrylamido-azobenzene)-ran-poly(2-hydroxyethylacrylate) (PMAAAB-ran-PHEA) was synthesized via hydrolysis of poly(methacrylamido-azobenzene)-ran-poly[2-((2'-tetrahydropyranyl)oxy)ethylacrylate] (PMAAAB-ran-P(THP-HEA)), which was prepared by conventional radical polymerization. PMAAAB-ran-PHEA micelles were then prepared via dialysis method against water with DMF as solvent. The structure, morphology, size, and low critical solution temperature (LCST) of PMAAAB-ran-PHEA and its micelles were determined by 1H-NMR, GPC, TEM, and DLS. The thermo- and photo-responsive behaviors of the resulting polymer micelles were investigated with Nile red as a fluorescence probe. The results showed that PMAAAB-ran-PHEA micelles were porous or bowl-shaped and its size was 135-150 nm, and its LCST was 55 °C when FMAAAB of the random copolymer was 0.5351; the hydrophobicity of the micellar core was changed reversibly under the irradiation of UV light and visible light without release of Nile red or disruption of micelles; the size and solubilization capacity of the micelles were dependent on temperature, and Nile red would migrate for many times between the water phase and the micelles, and finally increasingly accumulated during the repeated heating and cooling processes.

Lipid-Based Nanovesicular Drug Delivery Systems

In designing a new drug, considering the preferred route of administration, various requirements must be fulfilled. Active molecules pharmacokinetics should be reliable with a valuable drug profile as well as well-tolerated. Over the past 20 years, nanotechnologies have provided alternative and complementary solutions to those of an exclusively pharmaceutical chemical nature since scientists and clinicians invested in the optimization of materials and methods capable of regulating effective drug delivery at the nanometer scale. Among the many drug delivery carriers, lipid nano vesicular ones successfully support clinical candidates approaching such problems as insolubility, biodegradation, and difficulty in overcoming the skin and biological barriers such as the blood-brain one. In this review, the authors discussed the structure, the biochemical composition, and the drug delivery applications of lipid nanovesicular carriers, namely, niosomes, proniosomes, ethosomes, transferosomes, pharmacosomes, ufasomes, phytosomes, catanionic vesicles, and extracellular vesicles.

Stimuli-Responsive Supramolecular Polymers from Amphiphilic Phosphodiester-Linked Azobenzene Trimers

An amphiphilic phosphodiester-linked azobenzene trimer has been exploited in the development of stimuli-responsive, water-soluble supramolecular polymers. The trimer can reversibly undergo thermal and photoisomerization between Z- and E-isomers. Its self-assembly properties in aqueous medium have been investigated by spectroscopic and microscopic techniques, demonstrating that E- and Z-azobenzene trimers form supramolecular nanosheets and toroidal nanostructures, respectively. By virtue of the E/Z photoisomerization of the azobenzene units, the two different supramolecular morphologies can be switched by photoirradiation. The findings pave a way towards stimuli-responsive, water-soluble supramolecular polymers which hold great promise in the development of smart functional materials.

Review on Computer-Aided Design and Manufacturing of Drug Delivery Scaffolds for Cell Guidance and Tissue Regeneration

In the last decade, additive manufacturing (AM) processes have updated the fields of biomaterials science and drug delivery as they promise to realize bioengineered multifunctional devices and implantable tissue engineering (TE) scaffolds virtually designed by using computer-aided design (CAD) models. However, the current technological gap between virtual scaffold design and practical AM processes makes it still challenging to realize scaffolds capable of encoding all structural and cell regulatory functions of the native extracellular matrix (ECM) of health and diseased tissues. Indeed, engineering porous scaffolds capable of sequestering and presenting even a complex array of biochemical and biophysical signals in a time- and space-regulated manner, require advanced automated platforms suitable of processing simultaneously biomaterials, cells, and biomolecules at nanometric-size scale. The aim of this work was to review the recent scientific literature about AM fabrication of drug delivery scaffolds for TE. This review focused on bioactive molecule loading into three-dimensional (3D) porous scaffolds, and their release effects on cell fate and tissue growth. We reviewed CAD-based strategies, such as bioprinting, to achieve passive and stimuli-responsive drug delivery scaffolds for TE and cancer precision medicine. Finally, we describe the authors' perspective regarding the next generation of CAD techniques and the advantages of AM, microfluidic, and soft lithography integration for enhancing 3D porous scaffold bioactivation toward functional bioengineered tissues and organs.

CLEAR - Contact lens technologies of the future

Contact lenses in the future will likely have functions other than correction of refractive error. Lenses designed to control the development of myopia are already commercially available. Contact lenses as drug delivery devices and powered through advancements in nanotechnology will open up further opportunities for unique uses of contact lenses. This review examines the use, or potential use, of contact lenses aside from their role to correct refractive error. Contact lenses can be used to detect systemic and ocular surface diseases, treat and manage various ocular conditions and as devices that can correct presbyopia, control the development of myopia or be used for augmented vision. There is also discussion of new developments in contact lens packaging and storage cases. The use of contact lenses as devices to detect systemic disease has mostly focussed on detecting changes to glucose levels in tears for monitoring diabetic control. Glucose can be detected using changes in colour, fluorescence or generation of electric signals by embedded sensors such as boronic acid, concanavalin A or glucose oxidase. Contact lenses that have gained regulatory approval can measure changes in intraocular pressure to monitor glaucoma by measuring small changes in corneal shape. Challenges include integrating sensors into contact lenses and detecting the signals generated. Various techniques are used to optimise uptake and release of the drugs to the ocular surface to treat diseases such as dry eye, glaucoma, infection and allergy. Contact lenses that either mechanically or electronically change their shape are being investigated for the management of presbyopia. Contact lenses that slow the development of myopia are based upon incorporating concentric rings of plus power, peripheral optical zone(s) with add power or non-monotonic variations in power. Various forms of these lenses have shown a reduction in myopia in clinical trials and are available in various markets.

Diatom-inspired self-assembly for silica thin sheets of perpendicular nanochannels

HYPOTHESIS

Multistage silicate self-organization into light-weight, high-strength, hierarchically patterned diatom frustules carries hints for innovative silica-based nanomaterials. With sodium silicate in a biomimetic sol-gel system templated by a tri-surfactant system of hexadecyltrimethylammonium bromide, sodium dodecylsulfate, and poly(oxyethylene-b-oxypropylene-b-oxyethylene) (P123), mesoporous silica nanochannel plates with perpendicular channel orientation are synthesized. The formation process, analogous to that of diatom frustules, is postulated to be directed by an oriented self-assembly of the block copolymer micelles shelled with charged catanionic surfactants upon silication.

EXPERIMENTS

The postulated formation process for the oriented silica nanochannel plates was investigated using time-resolved small-angle X-ray and neutron scattering (SAXS/SANS) and freeze fracture replication transmission electron microscopy (FFR-TEM).

FINDINGS

With fine-tuned molar ratios of the anionic, cationic, and nonionic surfactants, the catanionic combination and the nonionic copolymer form charged, prolate ternary micelles in aqueous solutions, which further develop into prototype monolayered micellar plates. The prolate shape and maximized surfactant adsorption of the complex micelles, revealed from combined SAXS/SANS analysis, are of critical importance in the subsequent micellar self-assembly upon silicate deposition. Time-resolved SAXS and FFR-TEM indicate that the silicate complex micelles coalesce laterally into the prototype micellar nanoplates, which further fuse with one another into large sheets of monolayered silicate micelles of in-plane lamellar packing. Upon silica polymerization, the in-plane lamellar packing of the micelles further transforms to 2D hexagonal packing of vertically oriented silicate channels. The unveiled structural features and their evolution not only elucidate the previously unresolved self-assembly process of through-thickness silica nanochannels but also open a new line of research mimicking free-standing frustules of diatoms.

Efficient Photodynamic Therapy against Gram-Positive and Gram-Negative Bacteria Using Rose Bengal Encapsulated in Metallocatanionic Vesicles in the Presence of Visible Light

Significant consumption of antibiotics has generated multidrug resistance in bacteria, which is a major menace to human beings. Antibacterial photodynamic therapy (aPDT) is a progressing technique for inhibition of bacterial infection with minimal side effects. Metals and delivering agents play a major role in aPDT efficiency. Herein, we report a formulation to enrich the antibacterial photodynamic therapy utilizing metallocatanionic vesicles (MCVs) against both Gram-positive and Gram-negative bacteria. These MCVs were synthesized by utilizing iron-based double-chain metallosurfactant [FeCPC(II)] as a cationic surfactant and AOT, a double-chain anionic surfactant. These synthesized MCV fractions were characterized by distinct techniques like DLS, zeta potential, FE-SEM, confocal microscopy, SAXS, and UV-Visible spectroscopy. Polyhedral-shaped MCVs with a size of 200 nm were formed, wherein the charge and size of the catanionic vesicle can be controlled by varying the mixing ratios. Both Gram-positive bacteria, i.e., methicillin-resistant Staphylococcus aureus (MRSA), and Gram-negative bacteria, i.e., Escherichia coli (E. coli), were used for aPDT using Rose Bengal (RB) as a photosensitizer (PS) encapsulated in MCVs in the presence of a 532 nm wavelength laser. The aPDT against bacterial cells was evaluated for both dark and light toxicities. Pure MCVs also exhibited good antibacterial properties; however, much enhancement was observed in the presence of RB encapsulated in MCVs under light, where eradication of bacteria (E. coli and MRSA) was achieved in 30 min. The observations demonstrated that it is the presence of metal that enhances the singlet oxygen quantum yield of RB and MCVs help in retarding self-quenching and enhanced solubilization of RB. The cationic surfactant-rich fraction shows strong adhesion toward bacteria via electrostatic interactions. The outcome of this research shows that these newly fabricated metal-based metallocatanionic vesicles were effective against both Gram-positive and Gram-negative bacteria using aPDT and must be exploited for clinical applications as well as an alternative for antibiotics in the future.

Light-Triggered Rheological Changes in a System of Cationic Wormlike Micelles Formulated with a Photoacid Generator

"Smart" fluids displaying large changes in their rheological properties in response to external stimuli have been of great interest in recent years. For example, "smart" wormlike micelles (WLMs) that respond to pH can be readily formulated by combining a cationic surfactant such as cetyltrimethylammonium bromide (CTAB) with an aromatic compound such as 1,2-dihydroxybenzene (DHB). Here, we show that a pH-responsive aqueous formulation as mentioned above can be simultaneously made responsive to ultraviolet (UV) light by incorporating a photoacid generator (PAG) into the system. A commercially available PAG, diphenyliodonium-2-carboxylate, is used here. Upon exposure to UV light, this PAG irreversibly photolyzes into iodobenzene (IB) and benzoic acid (BA), with the formation of BA, leading to a drop in pH. WLMs formed by mixtures of CTAB, DHB, and the PAG are systematically characterized before and after UV irradiation. As the PAG photolyzes, an increase in the viscosity of WLMs occurs by a factor of 1000. We show that the ratio of the zero-shear viscosity η₀ (after UV/before UV) depends on the initial pH of the sample. The UV-induced increase in η₀ can be attributed to the growth of WLMs in solution, which in turn is influenced by both the ionization state of DHB and the presence of IB and BA.

Optimization and utilization of single chain metallocatanionic vesicles for antibacterial photodynamic therapy (aPDT) against E. coli

Currently, bacterial infection due to multi-drug-resistant bacteria is one of the foremost problems in public health. Photodynamic therapy plays a significant role against bacterial infection, without causing any side effects. But the photosensitizers are associated with many drawbacks, which lessen their photodynamic efficiency. In this context, the current study describes the synthesis of new metallocatanionic vesicles and employs them in photodynamic therapy. These vesicles were synthesized by using a single-chain cationic metallosurfactant (CuCPC I) and sodium oleate (NaOl) as an anionic component. These vesicles were characterized from conductivity, dynamic light scattering, zeta potential, field emission scanning electron microscopy, and confocal microscopy measurements. Methylene blue (MB) was used as a photosensitizer and its singlet oxygen quantum yield in the presence of these vesicles was determined by irradiating with 650 nm wavelength laser light. These vesicles play a dual-functional role, one helping in delivering the photosensitizer and the second doubling their singlet oxygen production capability due to the presence of metal ions. Antibacterial photodynamic therapy (aPDT) was studied against E. coli bacteria (Gram-negative bacteria). These vesicles also inherit their antibacterial activity and MB-encapsulated metallocatanionic vesicles on irradiation have shown 100% killing efficiency. In summary, we offer metallocatanionic vesicles prepared via a facile approach, which encapsulate a photosensitizer and can be used to combat E. coli infection through photodynamic therapy. We envisage that these synthesized metallocatanionic vesicles will provide a new modification to the catanionic mixture family and could be used for various applications in the future.

Some Features of Surfactant Organization in DNA Solutions at Various NaCl Concentrations

The photosensitive azobenzene-containing surfactant C₄-Azo-OC₆TMAB is a promising agent for reversible DNA packaging in a solution. The simulation of the trans-isomer surfactant organization into associates in a solution with and without salt as well as its binding to DNA at different NaCl concentrations was carried out by molecular dynamics. Experimental data obtained by spectral and hydrodynamic methods were used to verify the results of simulation. It was shown that head-to-tail aggregates with close to antiparallel orientation of surfactant molecules were formed at certain NaCl and surfactant concentrations (below critical micelle concentration). Such aggregates have two positively charged ends, and therefore, they can be attracted to negatively charged DNA phosphates far located along the chain, as well as those that belong to different molecules. This contributes to the formation of intermolecular DNA-DNA contacts, and this way, the experimentally observed precipitation of DNA can be explained.

Influence of inter- and intramolecular H-bonding on the mesomorphic and photoswitching behaviour of (E)-4-((4-(hexyloxy)phenyl)diazenyl)-N-phenyl benzamides

We report on the synthesis, phase behaviour and photoswitching studies of new azo linked rod-shaped molecules. These novel materials consist of three phenyl rings separated by a diazo, amide linkage with a hexyloxy tail and 2,4-substituents at either end of the phenyl ring. The mesomorphic behaviours, phase transition temperature including the enthalpies were characterized by polarizing optical microscope (POM) and differential scanning calorimetry (DSC). The influence of inter- and intramolecular hydrogen bonding on mesomorphic and photoisomerization was studied. Photoisomerization studies carried out both in the solid and liquid phase show the quick E-Z transition with prolonged thermal back relaxation (Z-E) by using UV-Visible spectroscopy. This interesting behaviour could be attributed to the presence of the hexyloxy tail, lateral electron withdrawing group and the influence of inter- or intramolecular hydrogen bonding. Excellent bright and dark states were accomplished using one of these materials in optical storage device. Further tuning is necessary to employ them for real applications.

Recent Advances in Application of Azobenzenes Grafted on Mesoporous Silica Nanoparticles in Controlled Drug Delivery Systems Using Light as External Stimulus

Hybrid materials based on Mesoporous Silica Nanoparticles (MSN) have attracted plentiful attention due to the versatility of their chemistry, and the field of Drug Delivery Systems (DDS) is not an exception. MSN present desirable biocompatibility, high surface area values, and a well-studied surface reactivity for tailoring a vast diversity of chemical moieties. Particularly important for DDS applications is the use of external stimuli for drug release. In this context, light is an exceptional alternative due to its high degree of spatiotemporal precision and non-invasive character, and a large number of promising DDS based on photoswitchable properties of azobenzenes have been recently reported. This review covers the recent advances in design of DDS using light as an external stimulus mostly based on literature published within last years with an emphasis on usually overlooked underlying chemistry, photophysical properties, and supramolecular complexation of azobenzenes.

Photoresponsive Behavior of Wormlike Micelles Constructed by Gemini Surfactant 12-3-12·2Br- and Different Cinnamate Derivatives

The photoresponsive wormlike micelles constructed by Gemini surfactants and cinnamate derivatives play a great role in the field of smart materials. However, how the structure of cinnamate derivatives affects the photoresponsive behavior of micelles is still a hotspot for scientists to research. Here, three kinds of aromatic salts with different ortho-substituted groups including trans- o-methoxy cinnamate ( trans-OMCA), trans- o-hydroxy cinnamate ( trans-OHCA), and trans-cinnamate ( trans-CA) were introduced into Gemini surfactant 12-3-12·2Br^- aqueous solutions to construct photoresponsive wormlike micelles through their noncovalent interactions. Their properties were researched using the rheological method, cryo-transmission electron microscopy, and ¹H NMR and two-dimensional nuclear Overhauser effect spectra. The results show that these cinnamate derivatives could well construct wormlike micelles with 12-3-12·2Br^-. Furthermore, subtle differences in the ortho substituents' structure have a significant effect on the photoresponsive behavior of formed wormlike micelles. Specifically, the zero viscosity (η₀) of 40 mM 12-3-12·2Br^-/24 mM trans-OHCA mixed solution decreases from 26.72 to 2.6 Pa·s with the shortening of the length of wormlike micelles after UV irradiation. Correspondingly, the η₀ for the same ratio of 12-3-12·2Br^-/ trans-OMCA decreases from 2.42 to 0.06 Pa·s and the wormlike micelles are transited into rodlike micelles and even spherical micelles after the same UV irradiation time. However, the variation of wormlike micelles in the 12-3-12·2Br^-/ trans-CA system induced by UV light is not obvious with η₀ being maintained at around 2.89 Pa·s. This study will help us better understand the effects of chemical groups on macrophenomena and microinteraction for micellar systems. It provides a theoretical basis for the construction of photoresponsive micelles, thus widening their application in the field of soft materials.

Photo-controlled release of paclitaxel and model drugs from RNA pyramids

Stimuli-responsive release of drugs from a nanocarrier in spatial-, temporal-, and dosage-controlled fashions is of great interest in the pharmaceutical industry. Paclitaxel is one of the most effective and popular chemotherapeutic drugs against a number of cancers such as metastatic or nonmetastatic breast cancer, non-small cell lung cancer, refractory ovarian cancer, AIDS-related Kaposi's sarcoma, and head and neck cancers. Here, by taking the advantage of RNA nanotechnology in biomedical and material science, we developed a three-dimensional pyramid-shaped RNA nanocage for a photocontrolled release of cargo, using paclitaxel as a model drug. The light-triggered release of paclitaxel or fluorophore Cy5 was achieved by incorporation of photocleavable spacers into the RNA nanoparticles. Upon irradiation with ultraviolet light, cargos were rapidly released (within 5 min). In vitro treatment of breast cancer cells with the RNA nanoparticles harboring photocleavable paclitaxel showed higher cytotoxicity as compared to RNA nanoparticles without the photocleavable spacer. The methodology provides proof of concept for the application of the light-triggered controlled release of drugs from RNA nanocages.

Photo-triggered polymer nanomedicines: From molecular mechanisms to therapeutic applications

The use of nanotechnology to improve treatment efficacy and reduce side effects is central to nanomedicine. In this context, stimuli-responsive drug delivery systems (DDS) such as chemical/physical gels or nanoparticles such as polymersomes, micelles or nanogels are particularly promising and are the focus of this review. Several stimuli have been considered but light as an exogenous trigger presents many advantages that are pertinent for clinical applications such as high spatial and temporal control and low cost. Underlying mechanisms required for the release of therapeutic agents in vitro and in vivo range from the molecular scale, namely photoisomerization, hydrophobicity photoswitching, photocleavage or heat generation via nanoheaters, through to the macromolecular scale. As well as these approaches, DDS destabilization, DDS permeation pore unblocking and formation are discussed.

Physical stimuli-responsive vesicles in drug delivery: Beyond liposomes and polymersomes

Over the past few decades, a range of vesicle-based drug delivery systems have entered clinical practice and several others are in various stages of clinical translation. While most of these vesicle constructs are lipid-based (liposomes), or polymer-based (polymersomes), recently new classes of vesicles have emerged that defy easy classification. Examples include assemblies with small molecule amphiphiles, biologically derived membranes, hybrid vesicles with two or more classes of amphiphiles, or more complex hierarchical structures such as vesicles incorporating gas bubbles or nanoparticulates in the lumen or membrane. In this review, we explore these recent advances and emerging trends at the edge and just beyond the research fields of conventional liposomes and polymersomes. A focus of this review is the distinct behaviors observed for these classes of vesicles when exposed to physical stimuli - such as ultrasound, heat, light and mechanical triggers - and we discuss the resulting potential for new types of drug delivery, with a special emphasis on current challenges and opportunities.

Light-responsive Drug Delivery Systems

Materials that interact with light and subsequently change their physicochemical properties are of great interest for drug delivery. The human body is semitransparent to light of the near-infrared (NIR) region, which makes it possible to use light as an external stimulus to trigger drug release. In this chapter, we review light-triggered drug release systems of both photochemical and photothermal mechanisms. We explore recent literature on a variety of light-responsive materials for drug delivery, including organic, inorganic, and hybrid systems, which collectively embody the strategies for synergizing light responsiveness for controlled drug release/activation with other drug delivery techniques.

DNA Interaction with Head-to-Tail Associates of Cationic Surfactants Prevents Formation of Compact Particles

Cationic azobenzene-containing surfactants are capable of condensing DNA in solution with formation of nanosized particles that can be employed in gene delivery. The ratio of surfactant/DNA concentration and solution ionic strength determines the result of DNA-surfactant interaction: Complexes with a micelle-like surfactant associates on DNA, which induces DNA shrinkage, DNA precipitation or DNA condensation with the emergence of nanosized particles. UV and fluorescence spectroscopy, low gradient viscometry and flow birefringence methods were employed to investigate DNA-surfactant and surfactant-surfactant interaction at different NaCl concentrations, [NaCl]. It was observed that [NaCl] (or the Debye screening radius) determines the surfactant-surfactant interaction in solutions without DNA. Monomers, micelles and non-micellar associates of azobenzene-containing surfactants with head-to-tail orientation of molecules were distinguished due to the features of their absorption spectra. The novel data enabled us to conclude that exactly the type of associates (together with the concentration of components) determines the result of DNA-surfactant interaction. Predomination of head-to-tail associates at 0.01 M < [NaCl] < 0.5 M induces DNA aggregation and in some cases DNA precipitation. High NaCl concentration (higher than 0.8 M) prevents electrostatic attraction of surfactants to DNA phosphates for complex formation. DAPI dye luminescence in solutions with DNA-surfactant complexes shows that surfactant tails overlap the DNA minor groove. The addition of di- and trivalent metal ions before and after the surfactant binding to DNA indicate that the bound surfactant molecules are located on DNA in islets.

Two azobenzene derivatives CAB/ACB as reusable sunscreen: UV absorptive capacity and biosafety evaluation

Exposure to UV radiation may cause harmful effects to the skin such as damage, aging and cancer, which can be prevented by using sunscreens. Here, two azobenzene derivatives, 4-cholesterocarbonyl-4'-(N,N,N-triethylaminebutyloxyl bromide) azobenzene (CAB) and 4-cholesterocarbonyl-4'-(N,N-diethylaminebutyloxyl) azobenzene (ACB) were studied as reusable sunscreen candidates. Biocompatibility studies including apoptosis, cytotoxicity and in vivo phototoxicity revealed that the two compounds were rather safe, except ACB, which showed a weak phototoxicity in vitro. Both CAB and ACB have good UV absorption capacity not only in their solution state (dimethylsulfoxide, DMSO) but also in the cosmetic cream state. A commercial sunscreen, avobenzone was decomposed upon UV irradiation and lost its UV protection ability, while that of CAB and ACB could be quickly recovered upon visible light irradiation, implying that they can serve as a new type of reusable sunscreen.

A gemini surfactant-containing system with abundant self-assembly morphology and rheological behaviors tunable by photoinduction

The photoisomerization of OMCA affects the degree of OMCA participation in the formation of mixed micelles and results in the transformation of micellar morphologies.

Controlling the Encapsulation of Charged Molecules in Vesicle-Templated Nanocontainers through Electrostatic Interactions with the Bilayer Scaffold

This work addresses the challenge of creating hollow nanocapsules with a controlled quantity of encapsulated molecules. Such nanocontainers or nanorattle-like structures represent an attractive platform for building functional devices, including nanoreactors and nanosensors. By taking advantage of the electrostatic attraction between oppositely charged cargo molecules and the surface of the templating bilayer of catanionic vesicles, formed by mixing single-tailed cationic and anionic surfactants, we were able to achieve a substantial increase in the local concentration of molecules inside the vesicle-templated nanocapsules. Control of electrostatic interactions through changes in the formulation of catanionic vesicles or the pH of the solution enabled fine tuning of the encapsulation efficiency in capturing ionic solutes. The ability to control the quantity of entrapped molecules greatly expands the application of nanocontainers in the creation of functional nanodevices.

Skin permeability enhancement by Bacillus subtilis alkaline protease: Application to transdermal drug delivery

Enzymes may offer great potentials in topical pharmaceutical applications provided that treatment conditions are controlled for efficacy and safety. In this study, the effect of alkaline protease produced by recombinant Bacillus subtilis cells on the ex-vivo permeability of rabbit ear skin was investigated under different conditions of enzyme activity (5-60 units) and exposure time (15-60min). Data for transepidermal water loss (TEWL) and permeation of a hydrophilic dye, rhodamine B (Rb), indicated biphasic activity-dependent and exposure time-dependent skin permeability. Maximum effects were obtained at 20 proteolytic units and 30min exposure. Findings proved consistent with histopathological changes indicating progressive stratum corneum (SC) loss and disruption of the dermo-epidermal junction at 20 units and up to 30min exposure time followed by dermal hyalinization at longer exposure. This was associated with progressive loss of skin hair. Applying the identified pretreatment conditions to transdermal delivery of vardenafil in a gel base across dorsal rat skin indicated a significant increase in plasma levels at 30 and 60min with minimal histopathological changes 5days post enzyme treatment. Accordingly, the recombinant B. subtilis alkaline protease offers promise as a pharmaceutical enzyme for transdermal drug delivery bioenhancement and dermatological applications.

Carrying pieces of information in organocatalytic bytes: Semiopoiesis-A new theory of life and its origins

Living beings have been classically described as autopoietic machines: chemical systems, which maintain a reproducible steady state by producing their components and boundaries. On the other hand, very simple autopoietic micelles have been produced in laboratory. They consist in micelles able to catalyse the production of their own surfactants. However is very clear that these autopoietic systems are unable to evolve. In this way, these autopoietic micelles cannot be associated to living organisms, which are always linked by evolutionary relationships. Here I claim that living beings are a class of autopoietic systems able to conserve molecular information, a feature denoted by the term semiopoiesis. By defining the molecular information of their products, semiopoietic systems control their interaction with the medium and, by being able to convey molecular information beneficial to the maintenance of the organization to their offspring, semiopoietic systems can evolve by natural selection. Information can be described as a specific state or order assumed among a set of other possible states or orders. Thus, molecular information is the specific order by which the molecular components are ordered, such as the sequence of nucleotides in nucleic acids or of amino acids in proteins. However, molecular information is not limited to copolymers. The atoms in small organic compounds may also present diverse orders, giving rise to isomers. Different isomers can present very distinct chemical and physical properties such that the biophysical-chemical properties of an organic compound are determined by its composition and molecular information i.e. the specific positions in which their atoms are posited. This molecular information can be conserved during reactions catalysed by selective organocatalysts. In this way, organocatalysts appear as plausible candidates to primitive hosts for the genetic information, before the emergence of systems based in biopolymers. The bases of a putative organocatalysts-based evolution are discussed. Finally, I argue that organocatalytic micelles can be designed to produce programmable materials, artificial photosynthesis, self-building materials and artificial life with relevant industrial impact.

Structure and dynamics of cetyltrimethylammonium chloride-sodium dodecylsulfate (CTAC-SDS) catanionic vesicles: High-value nano-vehicles from low-cost surfactants

HYPOTHESIS

Catanionic vesicles based on large-scale produced surfactants represent a promising platform for the design of innovative, effective and relatively inexpensive nano-vehicles for a variety of actives. Structural, dynamic and functional behavior of these aggregates is finely tuned by the molecular features of their components and can be opportunely tailored for their applications as drug carriers.

EXPERIMENTS

Here we investigate the aggregates formed by CTAC and SDS, two of the most diffused surfactants, by means of Dynamic Light Scattering, Small Angle Neutron Scattering and Electron Paramagnetic Resonance spectroscopy (EPR). The exploitation of these aggregates as nano-vehicles is explored using the poorly water-soluble antioxidant trans-resveratrol (t-RESV), testing t-RESV solubility and antioxidant activity by means of UV, fluorescence spectroscopy and EPR.

FINDINGS

The presence of a large stability region of catanionic vesicles on the CTAC-rich side of the phase diagram is highlighted and interpreted in terms of the mismatch between the lengths of the surfactant tails and of first reported effects of the chloride counterions. CTAC-SDS vesicles massively solubilize t-RESV, which in catanionic vesicles exerts a potent antioxidant and radical-scavenging activity. This behavior arises from the positioning of the active at the surface of the vesicular aggregates thus being sufficiently exposed to the external medium.