Successive extraction of As(V), Cu(II) and P(V) ions from water using spent coffee powder as renewable bioadsorbents

Eliminating waste with waste: transforming spent coffee grounds into microrobots for water treatment

Water pollutants such as oil spills, industrial dyes, and microplastics threaten public health and aquatic ecosystems. There are considerable challenges in removing water contaminants using traditional methods. Several studies have been conducted in recent years to develop effective water purification materials. Despite this, the mass production of most materials is extremely challenging because they involve multiple intricate steps and sophisticated equipment. Herein, we report the facile synthesis of spent coffee ground (SCG)-derived magnetic microrobots, which we dub "CoffeeBots", to remove oil, organic dyes, and microplastic pollution from contaminated seawater. In order to meet eco-friendly, high-yield and low-cost requirements, iron oxide nanoparticles (IONPs) were deposited on biodegradable SCGs using green chemistry. The IONPs on CoffeeBots facilitate magnetic navigation and recycling, microswarm assembly, and ease of retrieval after water remediation tasks. CoffeeBots' intrinsic surface hydrophobicity enables efficient on-the-fly capture and removal of oil droplets and microplastics from contaminated water with remote magnetic guidance. CoffeeBots were also functionalized with ascorbic acid (AA@CoffeeBots) to remove methylene blue (MB) dye contaminants from polluted seawater. SCGs and AA act as bioadsorbent and reducing agent, respectively, for MB dye removal whereas magnetic propulsion enhances mixing and accelerates MB decolorization. These CoffeeBots can be recycled numerous times for removing oil spills, organic dyes, and microplastics from the seawater. CoffeeBots hold considerable potential as sustainable, recyclable, and low-cost remediation agents for water treatment in the near future.

Coffee Waste Macro-Particle Enhancement in Biopolymer Materials for Edible Packaging

Plastic pollution has raised interest in biodegradable and sustainable plastic alternatives. For edible food packaging, seaweed biopolymers have been studied for their film-forming properties. In this study, packaging films were developed using the solvent casting technique from natural red seaweed (Kappaphycus alvarezii) and coffee waste product. The physico-chemical and thermal properties of seaweed/coffee biopolymer films was obtained using dynamic light scattering (DLS), scanning electron microscopy (SEM), Fourier transmission irradiation (FT-IR), water contact angle measurement (WCA) and thermogravimetric analysis (TGA). The characterization study was carried out to improve the film's morphological, thermal, and mechanical properties. The average particle size of coffee waste was found to be between 1.106 and 1.281 µm, with a zeta potential value of -27.0 mV indicating the compound's strong negative charge. The SEM analysis revealed that the coffee filler was evenly dispersed in the polymer matrix, improving the film's structural properties. The FT-IR result shows that coffee waste was successfully incorporated over the film matrix with the presence of a N-H bond. The hydrophobic property of the film was enhanced with the incorporation of coffee filler, indicating increased water contact angle compared to the neat film. The tensile properties of the biopolymer film were significantly improved at 4 wt% coffee powder with optimum tensile strength (35.47 MPa) with the addition of coffee waste powder. The incorporation of coffee waste into the seaweed matrix increased the functional properties of the fabricated biopolymer film. Thus, seaweed/coffee biopolymer film has the potential to be used in food packaging and other applications.

Adsorption of copper ions in water by adipic dihydrazide-modified kapok fibers

Kapok fibers (Ceiba pentandra) were modified for the removal of copper ions from aqueous solutions through adsorption. In this fast and facile method, the polysaccharide-like groups of kapok were oxidized with potassium periodate. The novel modification is the loading of the fibers with adipic dihydrazide (ADH) which contain nitrogen and oxygen atoms for heavy metal ion binding. Adsorption experiments have been carried out and analyzed via atom absorption spectroscopy and ultraviolet/visible spectroscopy. In preliminary adsorption experiments, different kapok-based materials have been analyzed on their adsorption capacity and removal efficiency via atom absorption spectroscopy. ADH-modified fibers showed the best results and an increase of copper removal efficiency by 30% in comparison to untreated kapok fibers and superior adsorption capacity compared to kapok fibers loaded with oxalic dihydrazide (ODH). Moreover, the impact of initial concentration and contact time on the adsorption capacity and on the removal efficiency values of the ADH-modified kapok fibers has been studied. Another comparison of the ADH-modified fibers with raw kapok which was cleaned with Milli-Q water, dichloromethane and ethylene glycol showed that the new adsorbents are best suited for copper solutions with concentration values of under 10 mg/L. The heavy metal adsorption experiments were analyzed through both isotherm models Langmuir and Freundlich. The Langmuir model is found to be a suitable model for copper ions. The value of the maximum adsorption capacity is 4.120 mg/g. The ADH-modified kapok fibers were characterized with attenuated total reflection infrared (ATR-IR) spectroscopy, magic-angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy and scanning electron microscopy (SEM).

Comparative Study of the Selective Sorption of Organic Dyes on Inorganic Materials—A Cost-Effective Method for Waste Treatment in Educational and Small Research Laboratories

Educational and research laboratories often produce relatively small amounts of highly diverse organic wastes. Treating waste can contribute significantly to the cost of running laboratories. This study introduced a simple and economical waste management system such that readily available used chromatography-grade inorganic materials, such as silica and alumina (basic and acidic), are utilized to treat remnant dye solutions and solution wastes from educational and small research laboratories. To recycle the adsorbents, they were heated to 600 °C, where the adsorbates were combusted. The results showed that acidic alumina is an effective adsorbent material for azo dyes and anionic dyes/stains, as well as textile dyes, with a 98 to 100% removal efficiency. Furthermore, alumina and silica possess excellent regeneration properties, where the dye removal efficiency of the materials was retained after regeneration at 600 °C. The adsorption properties of the materials were compared with those of aliginite and activated biomass from coffee grounds. Kinetic and thermodynamic studies of the sorption processes on the different materials were carried out. Overall, the inorganic materials used were efficient at removing contaminating remnant organic dyes stemming from educational and small research laboratories.

Spent coffee grounds: A sustainable approach toward novel perspectives of valorization

Coffee is one of the most popular and preferred drinks in the world, being consumed for its refreshing and energizing properties. As a result, the consumption of coffee generates millions of tons of waste, in particular, spent coffee grounds (SCG). On the contrary, food waste recovery is an incredibly sustainable and convenient solution to the growing need for materials, fuels, and chemicals. SCG has been developed as a precious resource of several high value-added products (oil, proteins, minerals, fatty acids, sterols….). Thus, a transformative pathway to a circular economy that involves the valorization of coffee wastes and by-products is currently attracting the attention of researchers worldwide. The potential growth of scientific papers and publications promotes a comprehensive review to determine the research hotspots, knowledge structure, and to consider future avenues and challenges. Therefore, in this paper, we conducted a systematic review based on 275 indexed papers on the composition and valorization of SCG as a prospective environmental source. PRACTICAL APPLICATIONS: SCG can be applied in agro-food industries.

A Review of Recent Advances in Spent Coffee Grounds Upcycle Technologies and Practices

Coffee is the world’s second largest beverage only next to water. After coffee consumption, spent coffee grounds (SCGs) are usually thrown away and eventually end up in landfills. In recent years, technologies and policies are actively under development to change this century old practice, and develop SCGs into value added energy and materials. In this paper, technologies and practices are classified into two categories, those reuses SCGs entirely, and those breakdown SCGs and reuse by components. This article provided a brief review of various ways to reuse SCGs published after 2017, and provided more information on SCG quantity, SCG biochar development for pollutant removal and using SCG upcycle cases for education. SCG upcycle efforts align the best with the UN Sustainable Development Goals (SDG) #12 “ensure sustainable consumption and production patterns,” the resultant fuel products contribute to SDG #7 “affordable and clean energy,” and the resultant biochar products contribute to SDG #6, “clean water and sanitation.”

Influence of Urea on Organic Bulk Fertilizer of Spent Coffee Grounds and Green Algae Chlorella sp. Biomass

To maintain high production and growing rates of plants, synthetically obtained fertilizers are commonly used. Excessive amounts of fertilizers damage the natural ecosystem and cause various environmental problems. In relation to the environment and its sustainability, another great environmental, economic, and social issue is food loss and waste. This paper aims to evaluate the impact of spent coffee grounds (SCG) on soil properties, rye growth, and their possibilities to be used as the biodegradable and organic material in the production of organic bulk fertilizer. This study demonstrated that spent coffee grounds contain primary nutrients; moreover, SCG could increase the content of soil organic matter. The addition of 4 wt% to 8 wt% SCG increased the number of spore-forming bacteria from <103 colony forming units/g soil (CFU/g soil) to 3 × 104 CFU/g soil, along with nitrogen assimilating bacteria (plain soil resulted in 5.0 × 105 CFU/g, and addition of SCG increased the value to 5.0 × 107 CFU/g). Since spent coffee grounds have a relatively high porosity and absorbance (25.3 ± 3.4 wt% in a water vapor environment and 4.0 ± 0.6 wt% in the environment of saturated sodium nitrate solution), they could be used to reduce the amount of water required for irrigation. To fully exploit their nutritional value for plants, spent coffee grounds were mixed with green algae biomass along with urea, and, during the research, higher value products (organic bulk fertilizer) were obtained.

Traditional Turkish Coffee with Medicinal Effect

Traditional Turkish coffee (TTC) is highly associated with caffeine and is known as a mind and heart stimulant as it helps keep tiredness at bay. Daily consumption of TTC naturally benefits human health such as anti-cancer, anti-diabetic, improved energy, anti-depression, reduced risk of heart disease, etc. The TTC was derived from particular types of Arabic coffee beans (ACB), and the preparation method of TTC is unique from other types of coffee. The main objective of the study was to investigate the therapeutic and biological effects of TTC. The ACB powder was characterized physicochemically using UV-Vis spectroscopy, Fourier transforms infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). In vitro analysis using HaCaT (Human keratinocyte cell line) proved the biocompatibility of ACB powder. Case studies which were focusing on healthy individuals as the research populace were conducted using TTC. Consumption of TTC was found beneficially compared to other types of coffee. The TTC was obtained from ACB, which was characterized by spectroscopic techniques and displayed biocompatibility due to the results on HaCaT cell lines. The TTC has beneficial therapeutic effects on individuals. According to statistical analysis, the disease-affected ratio of diabetes, heart disease, and depression was significantly decreased.

Hydrothermal synthesis, characterization and photocatalytic activity of Mg doped MoS2

In this research work nanoparticles of Mg (0, 1, 2 and 3%) doped MoS2 are prepared by Hydrothermal method at 200 °C for 9 h. Scanning Electron Microscope (SEM) for surface morphology, Fourier Transform Infrared Spectroscopy (FTIR) for structural and chemical bonding and UV-visible spectroscopy for optical properties are used. SEM showed that sheet-like structure has changed into stone-like shaped when Mg has doped into MoS2. From FTIR, Mo–O, Mo=S, and H–O bond peaks are becoming dim and new chemical bonds S=O, Mo=O, Mg–O, CH and OH are forming with the increase of Mg doping. UV-visible spectroscopy showed that MoS2 has an indirect bandgap 2.21 eV. Band gap decreased from 1.84 to 1.82 eV when the Mg doping was increased from 1 to 2%, respectively. As Mg concentration was increased i.e. 3% then band gap increased to 1.88 eV. Photocatalytic activity (PCA) of undoped and Mg doped MoS2 is appraised by degrading rhodamine blue (RhB) and methylene blue (MB) dyes. The results showed that PCA (in presence of visible light) Mg doped MoS2 is greater than pure MoS2 which significantly increased the photocatalytic properties.

A combined approach to remediate cadmium contaminated sediment using the acidophilic sulfur-oxidizing bacterial SV5 and untreated coffee ground

Cadmium (Cd) contamination in sediment is an emerging concern for the sustainability of aquatic ecosystem due to the toxicity of Cd is correlated to different trophic levels. An effective and inexpensive remediation strategy for Cd-contaminated sediment is desirable. The feasibility of using a newly isolated acidophilic sulfur-oxidizing bacterium and untreated coffee ground to remediate Cd-contaminated sediment was evaluated. The bioleaching approach was firstly conducted with the acidophilic sulfur-oxidizing bacterial SV5, resulting in Cd(II) release from Cd(II)-contaminated sediment. Subsequently, Cd(II) in the acidic leachate was further removed using untreated agricultural wastes. Untreated coffee ground exhibited about 2-fold Cd(II) removal efficiency comparing to that of rice husk and peanut shell. Scanning electron microscope (SEM) and Fourier-transform infrared spectroscopy (FTIR) analysis were conducted to characterize the coffee ground after the adsorption of 0 or 200 mg/L Cd(II). At pH 4, the optimal coffee ground concentration was 30 g/L along with 100 mg/L Cd(II) concentration. Adsorption of Cd(II) by coffee ground was rapid and the adsorption kinetic followed pseudo-second order model. Cd(II) sorption by coffee ground was a favorable process and Langmuir isotherm model well described the experimental data. Taken together, even at pH 4, coffee ground still showed good biosorption capacity for Cd(II) with short equilibrium time. This study suggests that acidophilic sulfur-oxidizing bacterial SV5 and untreated coffee ground could be used as inexpensive and environment-friendly biomaterial and agricultural waste for the remediation of Cd-contaminated sediment.

Kinetics, equilibrium and thermodynamics of dyes adsorption onto modified chitosan: a review

In view of promising sorption capacity, stability, biodegradability, cost-effectiveness, environmental friendly nature, regeneration and recycling ability, the chitosan (CS) based adsorbents are highly efficient for the sequestration of dyes. Since CS offers variable chemical structures and CS have been modified by incorporating different moieties. The CS composites with unique properties have been employed successfully for dye adsorption with reasonably high adsorption capacity versus other similar adsorbents. Modifications of CS were promising for the preparation of composites that are extensively studied for their adsorption capacities for various dyes. This review highlights the CS and its modification and their applications for the adsorption of dyes. The removal capacities of CS-based adsorbents, equilibrium modeling, kinetics studies and the thermodynamic characteristics are reported. Moreover, the FTIR, BET, SEM, TGA and XRD were employed for the characterization of CS modified adsorbents are also discussed. Results revealed that the modified CS is highly efficient and can be employed for the sequestration of dyes from effluents.

Kinetics, equilibrium and thermodynamics of dyes adsorption onto modified chitosan: a review

In view of promising sorption capacity, stability, biodegradability, cost-effectiveness, environmental friendly nature, regeneration and recycling ability, the chitosan (CS) based adsorbents are highly efficient for the sequestration of dyes. Since CS offers variable chemical structures and CS have been modified by incorporating different moieties. The CS composites with unique properties have been employed successfully for dye adsorption with reasonably high adsorption capacity versus other similar adsorbents. Modifications of CS were promising for the preparation of composites that are extensively studied for their adsorption capacities for various dyes. This review highlights the CS and its modification and their applications for the adsorption of dyes. The removal capacities of CS-based adsorbents, equilibrium modeling, kinetics studies and the thermodynamic characteristics are reported. Moreover, the FTIR, BET, SEM, TGA and XRD were employed for the characterization of CS modified adsorbents are also discussed. Results revealed that the modified CS is highly efficient and can be employed for the sequestration of dyes from effluents.

ZnO, CuO and Fe2O3 green synthesis for the adsorptive removal of direct golden yellow dye adsorption: kinetics, equilibrium and thermodynamics studies

In the present investigation, ZnO, CuO and Fe2O3 were prepared via green route and utilized for the sequestration of DGY (Direct Golden Yellow) dye. Affecting variables i.e., temperature, contact time, adsorbent dose and pH were optimized for maximum sequestration of dye from aqueous medium. The pH 2, adsorbent dose 0.1 g/50 mL dye solution, temperature 30 °C and 50 mg/L dye initial concentration were best levels for efficient dye adsorption and equilibrium was attained in 30 min reaction time. The dye sequestration on to ZnO, CuO and Fe2O3 was an exothermic process. Freundlich and Temkin adsorption isotherms explained well the dye adsorption onto nanoadsorbents and dye adsorption followed pseudo first order kinetic model. Effect of electrolytes and heavy metal ions was also investigated and both affected the adsorption process significantly. In the presences of surfactant/detergent, the removal of dye was reduced and 0.5 N NaOH efficiently desorbed the dye from nanoadsorbents. Findings depicted that the nanoadsorbents are effectual for the sequestration of DGY dye, which can be employed for the remediation of textile effluents.

Graphitic Porous Carbon Derived from Waste Coffee Sludge for Energy Storage

Coffee is one of the largest agricultural products; however, the majority of the produced coffee is discarded as waste sludge by beverage manufacturers. Herein, we report the use of graphitic porous carbon materials that have been derived from waste coffee sludge for developing an energy storage electrode based on a hydrothermal recycling procedure. Waste coffee sludge is used as a carbonaceous precursor for energy storage due to its greater abundance, lower cost, and easier availability as compared to other carbon resources. The intrinsic fibrous structure of coffee sludge is based on cellulose and demonstrates enhanced ionic and electronic conductivities. The material is primarily composed of cellulose-based materials along with several heteroatoms; therefore, the waste sludge can be easily converted to functionalized carbon. The production of unique graphitic porous carbon by hydrothermal carbonization of coffee sludge is particularly attractive since it addresses waste handling issues, offers a cheaper recycling method, and reduces the requirement for landfills. Our investigations revealed that the graphitic porous carbon electrodes derived from coffee sludge provide a specific capacitance of 140 F g-1, with 97% retention of the charge storage capacity after 1500 cycles at current density of 0.3 A g-1.

Super Effective Removal of Toxic Metals Water Pollutants Using Multi Functionalized Polyacrylonitrile and Arabic Gum Grafts

Super adsorbent polymers can be considered to be a very efficient solution for wastewater treatment. In general, their adsorption capacities depend on the type and amount of the functional groups present on the surface of the polymers, while their economic value is affected by their cost. Therefore, this study aims to understand the effect of multi-functionalization of cheap Arabic gum on the adsorption capability toward heavy metals. Graft copolymers of polyacrylonitrile (PAN) onto Arabic gum (AG) were prepared in aqueous solution using (KMnO₄/HNO₃) as a redox initiator. Chemical modification of the graft copolymer was carried out by reaction with hydrazine hydrochloride followed by hydrolysis in the basic medium. The modified graft product was characterized by various techniques, such as Fourier transform infrared spectroscopy (FTIR), elemental analysis, scanning electron microscope (SEM), and X-ray powder diffraction (XRD). The modified graft copolymer was used to adsorb Pb²⁺, Cd²⁺ and Cu²⁺ from their aqueous solutions using batch extraction. Different parameters influence the uptake behavior, including contact time, pH, and the initial concentration of the metal ions; all of these were investigated. The kinetics were investigated using the pseudo first order and pseudo second order, and the equilibrium data were analyzed using the Langmuir and Freundlich model. The modified graft product showed the superadsorbent capacity to obtain maximum values (Qmax) 1017, 413 and 396 mg/g for Pb²⁺, Cd²⁺ and Cu²⁺, respectively. Acid treatment with 0.2 M HNO₃ resulted in 96%, 99% and 99% metal recovery for the Pb²⁺, Cd²⁺ and Cu²⁺, respectively. This indicates the recyclability of product for further usage upon drying between treatments.

Green Synthesis of Metal Nanoparticles and their Applications in Different Fields: A Review

Nanotechnology is an art for application and handling of materials at very small scales i.e. 1–100 nm. The materials at this scale exhibit significantly different properties compared to same materials at larger scales. There are so many physical and chemical methods for the synthesis of nanoscale materials but the most appropriate are the ones that synthesize materials using green chemistry eco-friendly techniques. Recently, the collaboration between nanotechnology and biology has opened up new horizons of nanobiotechnology that integrates the use of biological materials in a number of biochemical and biophysical processes. This approach has significantly boosted up nanoparticles (NPs) production without employing harsh and toxic conditions and chemicals. This review is aimed to provide an outline of latest developments in synthesis of NPs through biotic entities and their potential applications.

Converting environmental risks to benefits by using spent coffee grounds (SCG) as a valuable resource

Coffee is perhaps one of the most vital ingredients in humans' daily life in modern world. However, this causes the production of million tons of relevant wastes, i.e., plastic cups, aluminum capsules, coffee chaff (silver skin), and spent coffee grounds (SCG), all thrown untreated into landfills. It is estimated that 1 kg of instant coffee generates around 2 kg of wet SCG; a relatively unique organic waste stream, with little to no contamination, separated directly in the source by the coffee shops. The produced waste has been under researchers' microscope as a useful feedstock for a number of promising applications. SCG is considered a valuable, nutrients rich source of bioactive compounds (e.g., phenolics, flavonoids, carotenoids, lipids, chlorogenic and protocatechuic acid, melanoidins, diterpenes, xanthines, vitamin precursors, etc.) and a useful resource material in other processes (e.g., soil improver and compost, heavy metals absorbent, biochar, biodiesel, pellets, cosmetics, food, and deodorization products). This paper aims to provide a holistic approach for the SCG waste management, highlighting a series of processes and applications in environmental solutions, food industry, and agricultural sector. Thus, the latest developments and approaches of SCG waste management are reviewed and discussed.

Extending the geographic reach of the water hyacinth plant in removal of heavy metals from a temperate Northern Hemisphere river

Water hyacinth (Eichhornia crassipes) has been used for environmentally sustainable phytoremediation of water, though its use has been geographically restricted. For the first time we extend its geographical reach by investigating its potential for clean-up of water from a highly polluted British river (Nant-Y-Fendrod, a tributary of the River Tawe). Investigations using the plant were conducted at three levels: a bench-scale study using polluted river water and synthetic solutions; an in-situ trial using water hyacinth within the Nant-Y-Fendrod; and a bankside trial to pump and treat river water. The removal of the largest number of heavy metals (21) from water in a single study using ICP-MS is reported, including Sb, for the first time. Results are promising, with bench-scale tests demonstrating up to 63% removal of Al, 62% Zn, 47% Cd, 22% Mn and 23% As, during just seven hours exposure to the plant. When extended to three weeks exposure, removal is evident in the order Al > Cd > Zn > Mn > Ni > As > V. Furthermore, in-situ mean removal of 6%, 11% and 15% of Mn, Zn and Cd respectively is demonstrated. As the world learns to adapt to climate change, studies of the type reported here are needed to exploit the remarkable phytoremediation potential of water hyacinth.

Extraction of Heavy Metals from Aqueous Medium by Husk Biomass: Adsorption Isotherm, Kinetic and Thermodynamic study

This study describes the adsorption of Cu (II), Co (II) and Ni (II) ions from wastewater on Vigna radiata husk biomass. The ability of adsorbent to capture the metal ions has been found to be in the order of Ni (II)>Co (II) and Cu (II) depending upon the size and nature of metal ions to be adsorbed. It has been observed that percentage removal of Cu (II), Co (II) and Ni (II) ions increases with increase of adsorbent dosage, contact time and pH of the medium but up to a certain extent. Maximum adsorption capacity (qmax) for Cu (II), Co (II) and Ni (II) ions has been found to be 11.05, 15.04 and 19.88 mg/g, respectively, under optimum conditions of adsorbent dosage, contact time and pH of the medium. Langmuir model best fits the adsorption process with R2 value approaches to unity for all metal ions as compared to other models because adsorption sites are seemed to be equivalent and only monolayer adsorption may occur as a result of binding of metal ion with a functional moiety of adsorbent. Pseudo second order kinetic model best interprets the adsorption process of Cu (II), Co (II) and Ni (II) ions. Thermodynamic parameters such as negative value of Gibbs energy (∆G°) gives information about feasibility and spontaneity of the process. Adsorption process was found to be endothermic for Cu (II) ions while exothermic for Co (II) and Ni (II) ions as signified by the value of enthalpy change (∆H°). Husk biomass was recycled three times for removal of Ni (II) from aqueous medium to investigate its recoverability and reusability. Moreover V. radiata husk biomass has a potential to extract Cu (II) and Ni (II) from electroplating wastewater to overcome the industrial waste water pollution.