Stable optical trapping and sensitive characterization of nanostructures using standing-wave Raman tweezers

Real-Time Monitoring of Adsorption-Induced Scrolling of Colloidal Inorganic Nanosheets

Inorganic nanotubes have attracted much attention due to their unique physicochemical properties. Nanotubes can be prepared by scrolling exfoliated nanosheets under ambient conditions. However, how the nanosheet scrolled in its colloidal state has not been experimentally visualized. In this paper, we directly observed the scrolling process of nanosheets upon adsorption of organic cations. Exfoliated flat nanosheets of niobate and clay in aqueous colloids were found to scroll by adding organic cations, such as exfoliation reagents, to the colloids. Employment of cationic stilbazolium dye enabled in situ observation of the dye adsorption and scrolling by optical microscopy based on changes in color and morphology of the nanosheets. The scrolling was promoted for nanosheets adsorbed with a stilbazolium dye with a longer alkyl chain, suggesting that the interaction between the hydrophobic parts of the dye cations is the driving force of the scrolling. This finding should encourage research on the formation of nanotubes from nanosheets and also provides important guidelines for the selection of appropriate exfoliation reagents when exfoliating nanosheets from layered crystals.

Optical trapping of sub-millimeter sized particles and microorganisms

While optical tweezers (OT) are mostly used for confining smaller size particles, the counter-propagating (CP) dual-beam traps have been a versatile method for confining both small and larger size particles including biological specimen. However, CP traps are complex sensitive systems, requiring tedious alignment to achieve perfect symmetry with rather low trapping stiffness values compared to OT. Moreover, due to their relatively weak forces, CP traps are limited in the size of particles they can confine which is about 100 μm. In this paper, a new class of counter-propagating optical tweezers with a broken symmetry is discussed and experimentally demonstrated to trap and manipulate larger than 100 μm particles inside liquid media. Our technique exploits a single Gaussian beam folding back on itself in an asymmetrical fashion forming a CP trap capable of confining small and significantly larger particles (up to 250 μm in diameter) based on optical forces only. Such optical trapping of large-size specimen to the best of our knowledge has not been demonstrated before. The broken symmetry of the trap combined with the retro-reflection of the beam has not only significantly simplified the alignment of the system, but also made it robust to slight misalignments and enhances the trapping stiffness as shown later. Moreover, our proposed trapping method is quite versatile as it allows for trapping and translating of a wide variety of particle sizes and shapes, ranging from one micron up to a few hundred of microns including microorganisms, using very low laser powers and numerical aperture optics. This in turn, permits the integration of a wide range of spectroscopy techniques for imaging and studying the optically trapped specimen. As an example, we will demonstrate how this novel technique enables simultaneous 3D trapping and light-sheet microscopy of C. elegans worms with up to 450 µm length.

Single-cell infrared vibrational analysis by optical trapping mid-infrared photothermal microscopy

Single-cell analysis by means of vibrational spectroscopy combined with optical trapping is a reliable platform for unveiling cell-to-cell heterogeneities in vast populations. Although infrared (IR) vibrational spectroscopy provides rich molecular fingerprint information on biological samples in a label-free manner, its application with optical trapping has never been achieved due to weak gradient forces generated by the diffraction-limited focused IR beam and strong background of water absorption. Herein, we present single-cell IR vibrational analysis that incorporates mid-infrared photothermal (MIP) microscopy with optical trapping. Optically trapped single polymer particles and red blood cells (RBCs) in blood could be chemically identified owing to their IR vibrational fingerprints. This single-cell IR vibrational analysis further allowed us to probe the chemical heterogeneities of RBCs originating from the variation in the intracellular characteristics. Our demonstration paves the way for the IR vibrational analysis of single cells and chemical characterization in various fields.

Experimental Study of Transverse Trapping Forces of an Optothermal Trap Close to an Absorbing Reflective Film

The optothermal manipulation of micro-objects is significant for understanding and exploring the unknown in the microscale word, which has found many applications in colloidal science and life science. In this work, we study the transverse forces of an optothermal trap in front of a gold film, which is an absorbing reflective surface for the incident laser beam. It is demonstrated that optothermal forces can be divided into two parts: optical force of a standing-wave trap, and thermal force of a thermal trap. The optical force of the standing-wave trap can be obtained by measuring the optical trapping force close to a non-absorbing film with same reflectance. The thermal force can be obtained by subtracting the optical force of the standing-wave trap from the total trapping force of the optothermal trap close to the gold film. The results show that both optical and thermal trapping forces increase with laser power increasing. The optical trapping force is larger than the thermal trapping force, which is composed of convective drag force and thermophoretic force. Further experiment is run to study the composition of thermal force. The result shows that the convective flow is generated later than the thermophoretic flow. The results proposed here are useful for enabling users to optimize optothermal manipulation method for future applications.

Lightsheet optical tweezer (LOT) for optical manipulation of microscopic particles and live cells

Optical trapping and patterning cells or microscopic particles is fascinating. We developed a light sheet-based optical tweezer to trap dielectric particles and live HeLa cells. The technique requires the generation of a tightly focussed diffraction-limited light-sheet realized by a combination of cylindrical lens and high NA objective lens. The resultant field is a focussed line (along x-axis) perpendicular to the beam propagation direction (z-axis). This is unlike traditional optical tweezers that are fundamentally point-traps and can trap one particle at a time. Several spherical beads undergoing Brownian motion in the solution are trapped by the lightsheet gradient potential, and the time (to reach trap-centre) is estimated from the video captured at 230 frames/s. High-speed imaging of beads with increasing laser power shows a steady increase in trap stiffness with a maximum of 0.00118 pN/nm at 52.5 mW. This is order less than the traditional point-traps, and hence may be suitable for applications requiring delicate optical forces. On the brighter side, light sheet tweezer (LOT) can simultaneously trap multiple objects with the distinct ability to manipulate them in the transverse (xy) plane via translation and rotation. However, the trapped beads displayed free movement along the light-sheet axis (x-axis), exhibiting a single degree of freedom. Furthermore, the tweezer is used to trap and pattern live HeLa cells in various shapes and structures. Subsequently, the cells were cultured for a prolonged period of time (> 18 h), and cell viability was ascertained. We anticipate that LOT can be used to study constrained dynamics of microscopic particles and help understand the patterned cell growth that has implications in optical imaging, microscopy, and cell biology.

Raman Spectroscopy—A Novel Method for Identification and Characterization of Microbes on a Single-Cell Level in Clinical Settings

Rapid and accurate identification of pathogens causing infections is one of the biggest challenges in medicine. Timely identification of causative agents and their antimicrobial resistance profile can significantly improve the management of infection, lower costs for healthcare, mitigate ever-growing antimicrobial resistance and in many cases, save lives. Raman spectroscopy was shown to be a useful—quick, non-invasive, and non-destructive —tool for identifying microbes from solid and liquid media. Modifications of Raman spectroscopy and/or pretreatment of samples allow single-cell analyses and identification of microbes from various samples. It was shown that those non-culture-based approaches could also detect antimicrobial resistance. Moreover, recent studies suggest that a combination of Raman spectroscopy with optical tweezers has the potential to identify microbes directly from human body fluids. This review aims to summarize recent advances in non-culture-based approaches of identification of microbes and their virulence factors, including antimicrobial resistance, using methods based on Raman spectroscopy in the context of possible use in the future point-of-care diagnostic process.

Advances in the analysis of single extracellular vesicles: A critical review

There is an ever-growing need for new cancer diagnostic approaches that provide earlier diagnosis as well as richer diagnostic, prognostic, and resistance information. Extracellular vesicles (EVs) recovered from a liquid biopsy have paradigm-shifting potential to offer earlier and more complete diagnostic information in the form of a minimally invasive liquid biopsy. However, much remains unknown about EVs, and current analytical approaches are unable to provide precise information about the contents and source of EVs. New approaches have emerged to analyze EVs at the single particle level, providing the opportunity to study biogenesis, correlate markers for higher specificity, and connect EV cargo with the source or destination. In this critical review we describe and analyze methods for single EV analysis that have emerged over the last five years. In addition, we note that current methods are limited in their adoption due to cost and complexity and we offer opportunities for the research community to address this challenge.

Chemical Analysis of Microplastics and Nanoplastics: Challenges, Advanced Methods, and Perspectives

Microplastics and nanoplastics have become emerging particulate anthropogenic pollutants and rapidly turned into a field of growing scientific and public interest. These tiny plastic particles are found in the environment all around the globe as well as in drinking water and food, raising concerns about their impacts on the environment and human health. To adequately address these issues, reliable information on the ambient concentrations of microplastics and nanoplastics is needed. However, micro- and nanoplastic particles are extremely complex and diverse in terms of their size, shape, density, polymer type, surface properties, etc. While the particle concentrations in different media can vary by up to 10 orders of magnitude, analysis of such complex samples may resemble searching for a needle in a haystack. This highlights the critical importance of appropriate methods for the chemical identification, quantification, and characterization of microplastics and nanoplastics. The present article reviews advanced methods for the representative mass-based and particle-based analysis of microplastics, with a focus on the sensitivity and lower-size limit for detection. The advantages and limitations of the methods, and their complementarity for the comprehensive characterization of microplastics are discussed. A special attention is paid to the approaches for reliable analysis of nanoplastics. Finally, an outlook for establishing harmonized and standardized methods to analyze these challenging contaminants is presented, and perspectives within and beyond this research field are discussed.

Incoherent Optical Tweezers on Black Titanium

Optical tweezers enable the manipulation of micro- and nanodielectric particles through entrapment using a tightly focused laser. Generally, optical trapping of submicron size particles requires high-intensity light in the order of MW/cm². Here, we demonstrate a technique of stable optical trapping of submicron polymeric beads on nanostructured titanium surfaces (black-Ti) without the use of lasers. Fluorescent polystyrene beads with a diameter d = 20-500 nm were successfully trapped on black-Ti by low-intensity focused illumination of incoherent light at λ = 370 m from a Hg lamp. Light intensity was 5.5 W/cm², corresponding to a reduced light intensity of 6 orders of magnitude. Upon switching off illumination, trapped particles were released from the illuminated area, indicating that trapping was optically driven and reversible. Such trapping behavior was not observed on nonstructured Ti surfaces or on nanostructured silicon surfaces. Thus, the Ti nanostructures were demonstrated to play a key role.

Full size microplastics in crab and fish collected from the mangrove wetland of Beibu Gulf: Evidences from Raman Tweezers (1-20 μm) and spectroscopy (20-5000 μm)

Microplastic pollution in organisms is a growing environmental concern worldwide. Current methods to identify microplastics (MPs) are subject to the limitations of analytical techniques, and there is no full-scale method to measure MPs in organisms. In this study, Raman Tweezers and spectroscopy methods were combined and applied to identify MPs in organisms within the size range of 1-5000 μm. The abundance of small MPs (1-20 μm) was measured in crab (0.39-2.83 items/individual) and fish (0.35-3.22 items/individual). Most MPs were transparent in color and pellet shape. The proportion of small MPs (1-20 μm) was 35.77%, and analysis revealed the non-inclusion of this fraction will induce large deviations in the overall measurement. The large MPs (20-5000 μm) were identified in crab and fish with abundances ranging from 0.74-4.96 items/individual and 0.72-5.39 items/individual, respectively. Mainly fiber shape items were detected, the dominant particle size ranged from 20 to 100 μm, and most MPs were white. Polyethylene (PE) and polyethylene terephthalate (PET) were the main types of MPs polymers detected. Our study fills the gap to provide a new method to detect MPs in organisms below 20 μm, facilitating study of the migration and transformation of small MPs in the environment.

Applications of Optically Controlled Gold Nanostructures in Biomedical Engineering

Since their inception, optical tweezers have proven to be a useful tool for improving human understanding of the microscopic world with wide-ranging applications across science. In recent years, they have found many particularly appealing applications in the field of biomedical engineering which harnesses the knowledge and skills in engineering to tackle problems in biology and medicine. Notably, metallic nanostructures like gold nanoparticles have proven to be an excellent tool for OT-based micromanipulation due to their large polarizability and relatively low cytotoxicity. In this article, we review the progress made in the application of optically trapped gold nanomaterials to problems in bioengineering. After an introduction to the basic methods of optical trapping, we give an overview of potential applications to bioengineering specifically: nano/biomaterials, microfluidics, drug delivery, biosensing, biophotonics and imaging, and mechanobiology/single-molecule biophysics. We highlight the recent research progress, discuss challenges, and provide possible future directions in this field.

Parallel micro-Raman spectroscopy of multiple cells in a single acquisition using hierarchical sparsity

Parallel micro-Raman spectroscopy can significantly expand the analytical capacity of single biological cells. By positioning the Raman spectra of multiple trapped cells on a detector array along the grating dispersion direction, the throughput of single-cell analysis can be improved by orders of magnitude. However, accurate retrieval of the individual spectra from the superimposed spectrum in a single acquisition presents great challenges. In this work, we developed a hierarchical sparsity method under a compressive sensing framework. The method combined a group-selection strategy with in-group sparsity for spectral reconstruction. The performances of the developed method were demonstrated with both simulated and experimental data, and the Raman spectra of the individual trapped cells were retrieved with both high accuracy and low noises; especially, with a group-selection mechanism, the developed method successfully avoided wrong selection of the eigenspectra for spectral reconstruction. The technique is expected to find wide applications in simultaneous monitoring of long biological processes of multiple cells by Raman spectroscopy.

Method of optical manipulation of gold nanoparticles for surface-enhanced Raman scattering in a microcavity

In this study, an optical manipulation and micro-surface-enhanced Raman scattering (microSERS) setup based on a microcavity was developed for efficient capture of gold nanoparticles using the photothermal effect. In addition, optical manipulation of gold nanoparticles and SERS signal detection were performed using only one laser. The results show that the SERS enhancement effect based on the microcavity was more than 20 times that based on a gold colloid solution. The laser power and velocity of nanoparticles exhibited a good linear relationship, and the velocity of nanoparticles decreased with decreasing radius r, which verifies the detriment of the radial thermophoresis in this study. This method can be used to quickly and efficiently drive metal nanoparticles and provides a promising approach for analysis of substances in the fields of chemistry and biology.

Sample preparation for Raman microspectroscopy

Raman spectroscopy and its variants allow for the investigation of a wide range of biological and biomedical samples, i. e. tissue sections, single cells and small molecules. The obtained information is on a molecular level. By making use of databases and chemometrical approaches, the chemical composition of complex samples can also be defined. The measurement procedure is straight forward, however most often sample preparation protocols must be implemented. While pure samples, such as high purity powders or highly concentrated chemicals in aqueous solutions, can be directly measured without any prior sample purification step, samples of biological origin, such as tissue sections, pathogens in suspension or biofluids, food and beverages often require pre-processing steps prior to Raman measurements. In this book chapter, different strategies for handling and processing various sample matrices for a subsequent Raman microspectroscopic analysis were introduced illustrating the high potential of this promising technique for life science and medical applications. The presented methods range from standalone techniques, such as filtration, centrifugation or immunocapture to innovative platform approaches which will be exemplary addressed. Therefore, the reader will be introduced to methods that will simplify the complexity of the matrix in which the targeted molecular species are present allowing direct Raman measurements with bench top or portable setups.

Raman Tweezers for Small Microplastics and Nanoplastics Identification in Seawater

Our understanding of the fate and distribution of micro- and nano- plastics in the marine environment is limited by the intrinsic difficulties of the techniques currently used for the detection, quantification, and chemical identification of small particles in liquid (light scattering, vibrational spectroscopies, and optical and electron microscopies). Here we introduce Raman Tweezers (RTs), namely optical tweezers combined with Raman spectroscopy, as an analytical tool for the study of micro- and nanoplastics in seawater. We show optical trapping and chemical identification of sub-20 μm plastics, down to the 50 nm range. Analysis at the single particle level allows us to unambiguously discriminate plastics from organic matter and mineral sediments, overcoming the capacities of standard Raman spectroscopy in liquid, intrinsically limited to ensemble measurements. Being a microscopy technique, RTs also permits one to assess the size and shapes of particles (beads, fragments, and fibers), with spatial resolution only limited by diffraction. Applications are shown on both model particles and naturally aged environmental samples, made of common plastic pollutants, including polyethylene, polypropylene, nylon, and polystyrene, also in the presence of a thin eco-corona. Coupled to suitable extraction and concentration protocols, RTs have the potential to strongly impact future research on micro and nanoplastics environmental pollution, and enable the understanding of the fragmentation processes on a multiscale level of aged polymers.

Optical attraction of strongly absorbing particles in liquids

Although optical tweezers function well for the majority of transparent particles, the absorbing particles experience a considerably high absorption force that can destroy the stable optical traps. Photophoretic force is an alternative mechanism that can be used to trap the absorbing particles. The major difficulty that is associated with the utilization of photophoretic forces for trapping strongly absorbing particles in liquids is the presence of considerable absorption on the illuminated side; a positive photophoretic force is usually induced, thereby pushing away the absorbing particles from the high-intensity region of the laser source. Here, we demonstrate a novel principle for the optical trapping and manipulation of strongly absorbing particles by harnessing strong Δα-type photophoretic forces while suppressing their stochastic nature in pure liquid glycerol using a normal divergent Gaussian beam and a Bessel-like beam. Further, our approach expands the optical manipulation of strong absorbing particles to liquid media and provides position control over the trapped particles, including the optical transportation and pinpoint positioning of the 3-μm objects over a distance of a millimeter.

On-chip optical trapping of extracellular vesicles using box-shaped composite SiO2-Si3N4 waveguides

The application of on-chip optical trapping and Raman spectroscopy using a dual-waveguide trap has so far been limited to relatively big synthetic and biological particles (e.g., polystyrene beads and blood cells). Here, from simulations, we present the capabilities of dual-waveguide traps built from composite SiO₂-Si₃N₄ waveguides for optical trapping of extracellular vesicles (EVs). EVs, tiny cell-derived particles of size in the range 30-1000 nm, strongly attract attention as potential biomarkers for cancer. EVs are hard to trap, because of their smallness and low index contract w.r.t. water. This poses a challenge for on-chip trapping. From finite-difference time-domain simulations we obtain the narrow beam emitted from the waveguide facet into water, for λ = 785 nm. For a pair of such beams, in a counter-propagating geometry and for facet separations of 5, 10 and 15 µm, we derive the inter-facet optical field, which has a characteristic interference pattern with hot spots for trapping, and calculate the optical force exerted on EVs of size in the range 50-1000 nm, as a function of EV position. We use two refractive index models for the EV optical properties. Integration of the force curves leads to the trapping potentials, which are well-shaped in the transverse and oscillatory in the longitudinal direction. By applying Ashkin's criterion, the conditions for stable trapping are established, the central result of this work. Very small EVs can be stably trapped with the traps by applying a power also suitable for Raman spectroscopy, down to a smallest EV diameter of 115 nm. We thus argue that this dual-waveguide trap is a promising lab-on-a-chip device with clinical relevance for diagnosis of cancer.

Laser-Induced Microsphere Hammer-Hit Vibration in Liquid

We demonstrate a new principle of the laser-induced hammer-hit vibration of a micron-sized black sphere in liquid glycerol with a single divergent Gaussian beam. The light-induced Δα-photophoretic force, which is significantly improved by the vibrating speed of the microparticle, is responsible for both the pushing and pulling force of the hammer-hit vibration. Our approach expands the optical manipulation of microparticle hammer-hit vibration to a liquid medium and provides full control over the trapped particles, including the adjustment of the vibration frequency, amplitude, and position.

Imaging the chemical activity of single nanoparticles with optical microscopy

Chemical activity of single nanoparticles can be imaged and determined by monitoring the optical signal of each individual during chemical reactions with advanced optical microscopes. It allows for clarifying the functional heterogeneity among individuals, and for uncovering the microscopic reaction mechanisms and kinetics that could otherwise be averaged out in ensemble measurements.

Nonvolatile plasmonic holographic memory based on photo-driven ion migration

Stability of data storage is essential for optical information processing. TiO₂ nanoporous films loaded with small-sized Ag nanoparticles thus attracted much attention due to their fast and polarization-sensitive photochemical response, which is able to realize optical phase modulation and high-density optical memory. However, little attention was given to the modulation of the silver ion migration, which plays a key role in anti-erasure of the recorded hologram. In this paper, the strong coupling of two phase gratings was achieved by long-term recording in the Ag-TiO₂ film irradiated with a pair of coherent left- and right-hand circular polarization lights from a Blu-ray (∼405  nm) laser. The migration of Ag⁺ ions was enhanced by the electronic field gradient force. A stable polarization holographic grating was obtained by this method and observed by a polarizing microscope. This work provided a strategy for a nonvolatile device based on photo-driven ion migration.